| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Python Social Auth is a social authentication and registration mechanism. Prior to 6.2.0, OpenIdConnectAuth in social_core/backends/open_id_connect.py uses get_and_store_nonce to place the OpenID Connect nonce in a shared OpenIdConnectAssociation table, and get_nonce and validate_claims verify only that the nonce exists and has not expired rather than binding it to the browser session and OAuth state that initiated the login. An attacker who obtains a victim's unused authorization code can start a separate login to obtain valid state for the attacker's browser, submit the victim's code with that state, and pass nonce validation because the victim nonce is globally available. With DEFAULT_USE_PKCE disabled in the default OpenIdConnectAuth configuration, the attacker can be logged in as the victim. This issue is fixed in version 6.2.0. |
| A flaw was found in Picketlink's SP signature validation; a SAML response containing zero assertion elements matching the signature check can allow an attacker to forge a SAML response and auth as any principal with any roles on the protected application. |
| A flaw was found in Picketlink Federation SAML; the unsolcited response handler would accept forged assertions with no verification or validation, permitting an unauthed attacker to authenticate as any principal in any role. This could lead to information disclosure, access to restricted operations, or other flaws. |
| Bucket Squatting in Google Cloud Run MCP versions prior to 1.11.0 on Google Cloud Platform allows an attacker to intercept and access proprietary source code, execute arbitrary code and exfiltrate data.
Users must upgrade to Cloud Run MCP version 1.11.0 or later. |
| A vulnerability has been identified in Mendix SAML (Mendix 10 compatible) (All versions < V4.2.4), Mendix SAML (Mendix 11 compatible) (All versions < V4.2.4), Mendix SAML (Mendix 9.24 compatible) (All versions < V3.6.29). Affected versions of the module do not properly validate the SAML response signature. This could allow unauthenticated remote attackers to hijack an account (session) in specific SSO configurations. |
| The Eurobank WooCommerce Payment Gateway WordPress plugin through 2.1.1 does not verify that a payment-confirmation request genuinely originates from the payment provider, and ships with the secret that would authenticate it empty by default, allowing unauthenticated attackers to mark any pending order as paid, and to force any order into a failed status without any secret at all. |
| The Qi Addons For Elementor WordPress plugin before 1.11.2 does not properly sanitise a widget's heading text after decoding HTML entities in it, allowing users with the Contributor role and above to embed live HTML forms, including password fields that submit to an external host, into posts where WordPress would otherwise strip them. |
| A vulnerability was identified in rathena FluxCP up to 98cd4b8fd83228c11b36fb3d097b8e0f7c105a8d. This issue affects the function verifyiprange of the file lib/Flux/PaymentNotifyRequest.php of the component PayPal IPN Handler. The manipulation of the argument X-Real-IP leads to origin validation error. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Yoosee GM8135S Camera 21.00.01.36. Affected is an unknown function of the component Secure Boot. Performing a manipulation results in improper verification of cryptographic signature. The attack needs to be approached locally. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| rclone from 1.55.0 before 1.75.2 contains a signature verification bypass in stable selfupdate that trusts checksums from unsigned bytes preceding the PGP-clearsigned SHA256SUMS block. Attackers controlling the release distribution path can prepend an unsigned checksum line matching a malicious archive, causing selfupdate to install an attacker-controlled rclone executable. |
| Rclone from 1.52.0 before 1.75.2 contains a cross-site request forgery vulnerability in the pCloud backend's localhost OAuth callback, which disables the state check and trusts the hostname parameter. Malicious web pages can send a stateless request to port 53682 during authorization, planting attacker tokens and API hosts so later transfers reach the attacker. |
| Improper verification of cryptographic signature in Windows Key Distribution Center allows an authorized attacker to elevate privileges locally. |
| Postiz signs its session, invitation and password reset tokens with one shared secret and without any marker of what a token is for. A route that refreshes the credentials of a browser-extension channel signed data taken from the request itself and stored the result where the requesting user can read it back. A user could therefore obtain a validly signed token containing any claims they choose, which the application accepts as a session, as an organization invitation with a chosen role, as a password reset or as an enterprise provisioning token.
A second, narrower route that creates team invitations signs extra fields from the request body in the same way. |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, the password reset token is predictably based on the time of the reset request. An attacker who knows the target's email address can request a reset and then brute-force the token. Exploiting this finding alone forces an unauthorized password reset on any account. This issue has been patched in version 26.05. |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 25.01 to before version 26.05, AuthenticationEndpoint.verifyOpenIdToken builds its verifier as JWT.require(algorithm).withIssuer(issuer).build() and does not enforce the aud claim during cryptographic validation. The aud check is performed manually afterwards via a single string-equality call, which only handles single-string aud values. In a multi-RP IdP setup, a token whose single-string aud matches the viewer's client ID but was issued for a different relying party passes the check and authenticates the attacker as the token's sub. This issue has been patched in version 26.05. |
| A Unsigned Firmware vulnerability exists in the boa Firmware Update functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted firmware binary can lead to arbitrary firmware update. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. In handle_transport_data(), when the 32-bit receiver index of an incoming transport-data message matched no session, the code both scheduled a new handshake and copied the datagram's source address into peer->endpoint with memcpy(&peer->endpoint, peer_addr, sizeof(peer->endpoint)). Because the receiver index is unknown, there is no key with which such a message could be verified, so the address written into peer->endpoint is entirely attacker-supplied. Every other endpoint update in the implementation happens only after authentication — after the Noise handshake in handle_handshake_init(), or after AEAD decryption plus the anti-replay check in wg_process_data_message().
The WireGuard listener is registered with net_udp_register() using no remote address or port filter and defaults to UDP port 51820 (CONFIG_WIREGUARD_PORT), and wg_ctrl_recv() resolves the peer by interface rather than by any cryptographic identity. Any host able to send a UDP datagram to that port can therefore reach the defect off-path, with no need to observe legitimate traffic: a 16-byte datagram carrying the transport-data type, zeroed reserved bytes and an arbitrary receiver index is sufficient. The vulnerable branch runs whenever the peer has neither a valid handshake nor a current keypair — the state at boot and after a session expires.
A single spoofed datagram redirects peer->endpoint to an address of the attacker's choosing, and all subsequent handshake initiations, keepalives and encrypted data packets are sent there. The legitimate peer never receives the initiations and so never re-authenticates, and nothing resets the endpoint afterwards, leaving the tunnel persistently unusable on devices whose peer does not initiate handshakes itself. The attacker can also relay the redirected initiations to the real peer to place itself in the path of the tunnel, observing ciphertext and traffic metadata and selectively dropping packets. WireGuard's end-to-end cryptography still prevents decryption or forgery of tunnel content, so the impact is loss of availability plus limited confidentiality, not key compromise.
The fix removes the endpoint learning from this path entirely: the stale-session recovery is kept, but the handshake is sent only to an endpoint learnt from an authenticated message, falling back to the configured cfg_endpoint, and the message is dropped when neither is known. CONFIG_WIREGUARD is marked experimental and is not enabled by default. |
| The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared on the wire in the broadcast DHCPDISCOVER at boot, and where the identifier did move it moved predictably by one. RFC 2131 4.1 requires a single identifier per transaction, chosen so that clients are unlikely to collide.
This identifier is the client's only unpredictable reply-validation token. net_dhcpv4_input() accepts a BOOTP reply on op, a matching xid, and a matching chaddr (the interface MAC, which is public); the UDP callback is registered with a wildcard remote address and port, and no server-identifier or source-address check is applied. An attacker who learns one identifier — for example any host on the same segment that sees the broadcast DHCPDISCOVER, or a DHCP server or relay on a network the device previously joined — therefore retains a valid token for the device's whole uptime, and can predict the identifiers of later exchanges, without having to observe the unicast renew traffic or race the legitimate server.
A forged reply that passes those checks has effect regardless of client state, because dhcpv4_parse_options() applies its side effects before the state machine gate in dhcpv4_handle_reply(): the router option calls net_if_ipv4_set_gw() and the DNS option calls dns_resolve_reconfigure(). A single accepted datagram can thus repoint the device's default gateway and resolvers at attacker-controlled addresses, redirecting its traffic; during RENEWING or REBINDING a forged DHCPACK re-binds the lease with attacker-chosen parameters and a forged DHCPNAK removes the address and restarts configuration.
The fix draws a fresh sys_rand32_get() value at each point where a transaction begins — entering SELECTING, RENEWING and REBINDING, and at the INIT/INIT-REBOOT entry taken when an interface with a lease goes down — while REQUESTING and DECLINE keep the identifier of the exchange they belong to, as RFC 2131 requires. As a side effect the client also no longer discards a slow server's offer after retransmitting a discover, and the initial-discover backoff now draws its own randomness instead of deriving it from the identifier. |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, when a password reset link is visited, the application generates a replacement password in a predictable way and emails it to the account holder. The insufficient entropy allows the password to be brute-forced by an attacker who can approximate the server-side generation time. Exploiting this finding in isolation requires the victim to have triggered the reset themselves and the attacker to infer the server time from network or email metadata. This issue has been patched in version 26.05. |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.names.dns.DNSDatagramProtocol accepts a UDP DNS response for a pending query when its 16-bit transaction ID matches but does not verify that the response came from the queried host and port. An attacker able to deliver a packet to the resolver's listening port with the correct transaction ID can inject a forged answer. The standard twisted.names.client.Resolver uses a new random source port for each query, increasing off-path attack complexity, while applications that reuse a DNSDatagramProtocol instance expose only the transaction-ID search space after the first query. A successful forgery can redirect hostname resolution and enable mail interception, server-side request forgery, or man-in-the-middle positioning. This issue is fixed in version 26.10.0rc1. |
