| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cross-Site Request Forgery (CSRF) vulnerability in Apache Camel OAuth component.
This issue affects Apache Camel: from 4.11.0 before 4.18.5, from 4.19.0 before 4.22.1.
The authorization code callback did not carry a state parameter binding it to the authorization request that started the flow, and the callback did not verify one. An authorization code obtained in any browser could therefore be redeemed at the callback and associated with whichever session presented it, which is login cross-site request forgery: a victim can be silently signed in as an identity the attacker controls, so that actions the victim then performs, and data they then submit, land in the attacker's account. The same unvalidated callback handling also allowed the post-authentication redirect target to be influenced, giving an open redirect from a trusted origin. The state check runs before the authorization code is redeemed, so these paths are reachable without any interaction with the identity provider.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The authorization request now issues a state value bound to the session, and the callback rejects a request whose state is absent or does not match, stopping the route with a 400 response. For deployments that cannot upgrade immediately, terminate the authorization code flow in a component that performs its own state binding rather than relying on the Camel callback. Note that after upgrading, a deployment behind a proxy that drops or rewrites the callback query string will begin to see 400 responses, because the state parameter must survive the round trip. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Kylin. Special parameter in JDBC URL can lead to code injection.
Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Exposure of Sensitive Information (system level configuration info) to an Unauthorized Actor vulnerability in Apache Kylin.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Heap buffer overflow in the HLL sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
When deserializing a sketch in LIST mode, from either a byte buffer or a stream, the coupon count was read from the input and used as the number of entries to copy into a fixed buffer of 8 entries, without checking it against the buffer's capacity. A crafted sketch could cause a write of up to 988 bytes past the end of this internal heap buffer. This can corrupt heap memory, causing a crash and potentially enabling further exploitation.
This issue affects Apache DataSketches C++: from 1.0.0-incubating before 5.3.0. Only applications that deserialize HLL sketches from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| REST API Mass Assignment vulnerability in Apache Allura.
This issue affects Apache Allura: through 1.21.0.
Users are recommended to upgrade to version 1.22.0, which fixes the issue. |
| OAuth1 Request Replay Attack vulnerability in Apache Allura.
This issue affects Apache Allura: through 1.21.0.
Users are recommended to upgrade to version 1.22.0 which fixes the issue. |
| OAuth1 callback validation vulnerability in Apache Allura.
This issue affects Apache Allura: through 1.21.0.
Users are recommended to upgrade to version 1.22.0, which fixes the issue. |
| Improper Authorization vulnerability in Apache SkyWalking BanyanDB.
The Canopy includes incomplete proof-of-concept role and monitoring-proxy functionality. Under a non-default configuration with a readonly Canopy user and a reachable monitoring target, that user can send non-read requests through the monitoring proxy.
This issue affects Apache SkyWalking BanyanDB: from 0.11.0 before 0.11.1.
Users are recommended to upgrade to version 0.11.1, which fixes the issue. |
| In Apache CXF, the Netty-based HTTP client transport (cxf-rt-transports-http-netty-client) did not verify that the hostname in the server’s TLS certificate matched the host being called. This applied over both HTTP/1.1 and HTTP/2, even when disableCNCheck was left at its default value of false. The certificate chain was validated against the configured trust store, but the endpoint’s identity was not. A network attacker able to intercept traffic could present any certificate trusted by the client, such as a publicly issued certificate for a domain they control, and impersonate the target service. They could then read or modify the exchanged messages, including credentials.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| In Apache CXF, the parser for multipart/MTOM attachment part headers did not fully enforce the configured attachment-max-header-size (default 300 characters) and attachment-headers-max-count (default 500) limits. The size limit was applied only to each physical line, not to a header value built from continuation lines or to the combined values of a repeated header. The count limit was checked against the number of distinct header names, not the total number of header lines. A remote, unauthenticated attacker could send a multipart request with very large folded or repeated part headers. The server would then allocate memory without bound, causing a denial of service.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| Improper Verification of Cryptographic Signature vulnerability in Apache CXF's JAX-RS XML Security module. The JAX-RS XML Signature interceptors (XmlSigInHandler, XmlSigInInterceptor and the streaming XmlSecInInterceptor) did not ensure that the XML passed to the application was covered by the signature. An attacker with any document signed by a trusted key could wrap it in unsigned content, which the application would then treat as signed.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| The max_age authentication-freshness check in OidcClientCodeRequestFilter was inoperative due to a milliseconds/seconds unit mismatch and an inverted comparison polarity. Any relying party using setMaxAgeOffset to enforce re-authentication would silently accept sessions of any age, bypassing step-up authentication policies. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| By default, StaxUtils placed no limit on the total number of elements or the total number of characters in an XML document. A very large request could therefore use a lot of memory and CPU during parsing, especially where CXF builds a DOM from the input (for example SAAJ or WS-Security), and could cause a denial of service when no request size limit was configured. Both limits now have defaults: the maximum element count is 100 × maxChildElements (5,000,000 by default), and the maximum document size is 256M characters. Applications that process larger documents can raise the limits with the org.apache.cxf.stax.maxElementCount and org.apache.cxf.stax.maxXMLCharacters properties.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| Out-of-bounds read in the VarOpt union deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
var_opt_union::deserialize() read the 32-byte preamble of a non-empty union after checking that only 8 bytes were available, so a truncated serialized union could cause a read of up to 24 bytes past the end of the input. For such inputs, the size remaining for the embedded sketch was also computed by an unsigned subtraction that could wrap around, so the embedded sketch's own size checks no longer limited reads to the input. The bytes read can become part of the deserialized union's state. This can cause a crash (denial of service) and could expose adjacent memory contents.
This issue affects Apache DataSketches C++: from 2.0.0-incubating before 5.3.0. Only applications that deserialize VarOpt unions from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| Out-of-bounds read in the compact Theta sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
compact_theta_sketch::deserialize() and wrapped_compact_theta_sketch::wrap() read header fields before checking that the input was long enough. For the compressed format, the size check could be defeated by a 32-bit overflow, and two header fields that control decoding were not validated; this also affected deserialization from a stream. A crafted or truncated sketch could cause a read past the end of the input. In the compressed case the over-read can be large, and the bytes read can become part of the deserialized sketch. This can cause a crash (denial of service) and could expose adjacent memory contents.
This issue affects Apache DataSketches C++: from 3.1.0 before 5.3.0. Only applications that deserialize Theta sketches from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| Out-of-bounds read and write in the CPC sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
A crafted serialized CPC sketch passed to cpc_sketch::deserialize(), from either a byte buffer or a stream, can cause the decompressor to read past the end of the compressed data, because the read position was only checked after decoding finished. In the hybrid flavor, it can also cause a write outside an internal heap buffer, because decoded row indices were not validated. Several other header fields and decoded values, including lg_k, were also not validated. This can corrupt heap memory, causing a crash and potentially enabling further exploitation.
This issue affects Apache DataSketches C++: from 2.0.0-incubating before 5.3.0. Only applications that deserialize CPC sketches from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| Improper input validation vulnerability in Apache Camel Karavan.
When a deployment was started, Karavan unmarshalled a project's `kubernetes.yaml` and applied every resource it contained to the cluster without restricting the resource kinds, without rejecting security-sensitive pod options, and without pinning the target namespace. An authenticated user of any role could therefore have Karavan apply arbitrary Kubernetes resources within the reach of its service account, including pods requesting hostNetwork, hostPID, hostIPC, hostPath volumes, host ports, privileged containers, privilege escalation or added capabilities.
This issue affects Apache Camel Karavan: from 4.0.0 before 4.22.1.
Users are recommended to upgrade to version 4.22.1, which fixes the issue. |
| Improper limitation of a pathname to a restricted directory ('path traversal') vulnerability in Apache Camel Karavan.
A project file name supplied through the project file API was used verbatim as a path segment when the project was written to the working copy for a Git commit, so a name containing `../` sequences caused the file content to be written outside the project directory, to any location writable by the Karavan process. An authenticated user of any role could use this to overwrite application configuration or files on the application classpath and so execute code in the Karavan container.
This issue affects Apache Camel Karavan: from 3.18.0 before 4.22.1.
Users are recommended to upgrade to version 4.22.1, which fixes the issue. |
| The defaults settings for the CORS filter provided in Apache Tomcat 9.0.0.M1 to 9.0.8, 8.5.0 to 8.5.31, 8.0.0.RC1 to 8.0.52, 7.0.41 to 7.0.88 are insecure and enable 'supportsCredentials' for all origins. It is expected that users of the CORS filter will have configured it appropriately for their environment rather than using it in the default configuration. Therefore, it is expected that most users will not be impacted by this issue. |
| Security constraints defined by annotations of Servlets in Apache Tomcat 9.0.0.M1 to 9.0.4, 8.5.0 to 8.5.27, 8.0.0.RC1 to 8.0.49 and 7.0.0 to 7.0.84 were only applied once a Servlet had been loaded. Because security constraints defined in this way apply to the URL pattern and any URLs below that point, it was possible - depending on the order Servlets were loaded - for some security constraints not to be applied. This could have exposed resources to users who were not authorised to access them. |
