| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7 (patched in 13.6.12 (LTS) and 13.9.0 (STS)), allow a physically proximate attacker (with elevated privileges) to read and modify the Appliance SSD contents (because they are unencrypted). |
| In Splunk On-Call (VictorOps) app versions below 1.0.43 on Splunkbase, a user who does not hold the "admin" or "power" Splunk roles could read a partially masked Application Programming Interface (API) key from the App Key Value Store (KV Store). The exposure is possible because the Splunk On-Call (VictorOps) app does not fully mask the API key before storing it in a KV Store collection that the user can read. For more information see About the app key value store (https://help.splunk.com/en/data-management/splunk-enterprise-admin-manual/9.2/administer-the-app-key-value-store/about-the-app-key-value-store) in the Splunk documentation. |
| CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 fails to encrypt the initramfs contents, allowing for the offline recovery of secrets and cryptographic details. |
| Cleartext Storage of Sensitive Information in Memory vulnerability in Johnson Controls Simplex Incident Manager / Autocall Fire Administrator may allow an attcker to Retrieve Embedded Sensitive Data.
This issue affects Simplex Incident Manager / Autocall Fire Administrator: before 2.01.05. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 NIM could allow a remote attacker to bypass security restrictions due to the exposure of intermediate certificate authority private keys in a publicly available update file. |
| Cleartext storage of sensitive information vulnerability in Kriptok Crypto and Information Technologies Industry Trade Inc. Cryptosim allows Retrieve Embedded Sensitive Data.
This issue affects Cryptosim: before 3.1.0.229. |
| A security flaw has been discovered in lin-snow Ech0 up to 5.4.1. Affected by this issue is the function MD5Encrypt of the file internal/util/crypto/crypto.go. Performing a manipulation results in risky cryptographic algorithm. Remote exploitation of the attack is possible. The complexity of an attack is rather high. The exploitation is known to be difficult. Upgrading to version 5.4.2 can resolve this issue. The patch is named 9ce19a3b0d0765086a655f45d3a706ec1810404f. It is recommended to upgrade the affected component. |
| In versions below 2.1.4 of the Venafi app for Splunk SOAR, a user who holds a role with permission to run actions could expose keystore and private-key passwords by invoking the get certificate action, because the action's keystore_password and password parameters are not masked and are shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameters as passwords. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 2.2.1 of the Splunk Attack Analyzer Connector for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive archive password by invoking either the detonate file or detonate url action, because the action's archive_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 1.0.5 of the RSA SecurID Authentication Manager app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive token serial by invoking either the enable token or revoke token action, because the action's token_serial parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 3.8.5 of the Phantom app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive archive password by invoking the deflate item action, because the action's password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 1.5.2 of the MS Graph for Active Directory app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive password by invoking the reset password action, because the action's temp_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 5.1.3 of the CrowdStrike OAuth API app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive document password by invoking either the detonate file or detonate url action, because the action's document_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 2.2.1 of the Cisco Webex app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive meeting password by invoking the schedule meeting action, because the action's password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| stigmem-node contains an insecure default configuration vulnerability that allows federation traffic to traverse networks without mTLS protection when non-loopback endpoints are enabled. Operators who explicitly disabled mTLS while binding federation to non-loopback addresses expose federation traffic to cleartext interception and man-in-the-middle attacks. |
| In versions below 3.2.2 of the Zoom app for Splunk SOAR, a user who holds a role with permission to run actions could expose meeting and personal meeting ID passwords by invoking one of the create meeting, update meeting, or update user settings actions, because the affected password and pmi_password parameters are not masked and are shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameters as passwords. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 2.1.9 of the AWS IAM app for Splunk SOAR, a user who holds a role with permission to run actions could expose sensitive AWS credentials by invoking an action that accepts the credentials parameter, because the parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 2.5.3 of the Azure AD Graph app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive password by invoking the reset password action, because the action's temp_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 2.4.5 of the Cisco Secure Malware Analytics app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive sample password by invoking the detonate file action, because the action's sample_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| Missing encryption of sensitive data in Smart Switch prior to version 3.7.72.6 allows adjacent attackers to intercept transmitted data. |
