Export limit exceeded: 417673 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (3461 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-27419 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netrom: Fix data-races around sysctl_net_busy_read We need to protect the reader reading the sysctl value because the value can be changed concurrently. | ||||
| CVE-2026-41355 | 1 Openclaw | 1 Openclaw | 2026-05-12 | 7.3 High |
| OpenClaw before 2026.3.28 contains an arbitrary code execution vulnerability in mirror mode that converts untrusted sandbox files into workspace hooks. Attackers with mirror mode access can execute arbitrary code on the host during gateway startup by exploiting enabled workspace hooks. | ||||
| CVE-2026-43203 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: atm: fore200e: fix use-after-free in tasklets during device removal When the PCA-200E or SBA-200E adapter is being detached, the fore200e is deallocated. However, the tx_tasklet or rx_tasklet may still be running or pending, leading to use-after-free bug when the already freed fore200e is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet(). One of the race conditions can occur as follows: CPU 0 (cleanup) | CPU 1 (tasklet) fore200e_pca_remove_one() | fore200e_interrupt() fore200e_shutdown() | tasklet_schedule() kfree(fore200e) | fore200e_tx_tasklet() | fore200e-> // UAF Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to synchronize with any pending or running tasklets. Moreover, since fore200e_reset() could prevent further interrupts or data transfers, the tasklet_kill() should be placed after fore200e_reset() to prevent the tasklet from being rescheduled in fore200e_interrupt(). Finally, it only needs to do tasklet_kill() when the fore200e state is greater than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized in earlier states. In a word, the tasklet_kill() should be placed in the FORE200E_STATE_IRQ branch within the switch...case structure. This bug was identified through static analysis. | ||||
| CVE-2026-43217 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: gen2: Add sanity check for session stop In iris_kill_session, inst->state is set to IRIS_INST_ERROR and session_close is executed, which will kfree(inst_hfi_gen2->packet). If stop_streaming is called afterward, it will cause a crash. Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet to firmware to fix that. | ||||
| CVE-2026-44336 | 1 Praison | 1 Praisonai | 2026-05-11 | 9.6 Critical |
| PraisonAI is a multi-agent teams system. Prior to version 4.6.34, PraisonAI's MCP (Model Context Protocol) server (praisonai mcp serve) registers four file-handling tools by default — praisonai.rules.create, praisonai.rules.show, praisonai.rules.delete, and praisonai.workflow.show. Each accepts a path or filename string from MCP tools/call arguments and joins it onto ~/.praison/rules/ (or, for workflow.show, accepts an absolute path) with no containment check. The JSON-RPC dispatcher passes params["arguments"] blind to each handler via **kwargs without validating against the advertised input schema. By setting rule_name="../../<some-path>" an attacker walks out of the rules directory and writes any file the running user can write. Dropping a Python .pth file into the user site-packages directory escalates this primitive to arbitrary code execution in any subsequent Python process the user spawns — the next praisonai CLI invocation, an IDE script run, the user's python REPL, or any background Python service. This issue has been patched in version 4.6.34. | ||||
| CVE-2026-44995 | 1 Openclaw | 1 Openclaw | 2026-05-11 | 7.3 High |
| OpenClaw before 2026.4.20 contains an improper environment variable validation vulnerability in MCP stdio server configuration that allows attackers to execute arbitrary code. Malicious workspace configurations can pass dangerous startup variables like NODE_OPTIONS, LD_PRELOAD, or BASH_ENV to spawned MCP server processes, enabling code injection when operators start sessions using those servers. | ||||
| CVE-2026-43940 | 2 Electerm, Electerm Project | 2 Electerm, Electerm | 2026-05-11 | 8.4 High |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to version 3.7.16, the runWidget function in src/app/widgets/load-widget.js constructs a file path by directly concatenating user‑supplied widget identifiers without any sanitisation. Because runWidget is exposed to the renderer process via an asynchronous IPC handler with no input validation, an attacker who achieves JavaScript execution inside the renderer (for example, through a malicious plugin or a cross‑site scripting flaw in the built‑in webview) can abuse a path traversal (../) to load and execute an arbitrary JavaScript file anywhere on the victim’s filesystem. This gives the attacker local code execution with the full privileges of the electerm process, leading to complete system compromise. This issue has been patched in version 3.7.16. | ||||
| CVE-2026-32226 | 1 Microsoft | 8 .net, .net Framework, Windows 10 1607 and 5 more | 2026-05-11 | 5.9 Medium |
| Concurrent execution using shared resource with improper synchronization ('race condition') in .NET Framework allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-45184 | 1 Kde | 1 Kdenlive | 2026-05-11 | 6.5 Medium |
| Kdenlive before 26.04.1 allows dangerous proxy parameters when an attacker-controlled project file is used. | ||||
| CVE-2026-41907 | 1 Uuidjs | 1 Uuid | 2026-05-11 | 7.5 High |
| uuid is for the creation of RFC9562 (formerly RFC4122) UUIDs. Prior to 14.0.0, v3, v5, and v6 accept external output buffers but do not reject out-of-range writes (small buf or large offset). This allows silent partial writes into caller-provided buffers. This vulnerability is fixed in 14.0.0. | ||||
| CVE-2026-43227 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/sh_tmu: Always leave device running after probe The TMU device can be used as both a clocksource and a clockevent provider. The driver tries to be smart and power itself on and off, as well as enabling and disabling its clock when it's not in operation. This behavior is slightly altered if the TMU is used as an early platform device in which case the device is left powered on after probe, but the clock is still enabled and disabled at runtime. This has worked for a long time, but recent improvements in PREEMPT_RT and PROVE_LOCKING have highlighted an issue. As the TMU registers itself as a clockevent provider, clockevents_register_device(), it needs to use raw spinlocks internally as this is the context of which the clockevent framework interacts with the TMU driver. However in the context of holding a raw spinlock the TMU driver can't really manage its power state or clock with calls to pm_runtime_*() and clk_*() as these calls end up in other platform drivers using regular spinlocks to control power and clocks. This mix of spinlock contexts trips a lockdep warning. ============================= [ BUG: Invalid wait context ] 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88 other info that might help us debug this: context-{5:5} 1 lock held by swapper/0/0: ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 #0: ffff8000817ec298 ccree e6601000.crypto: ARM ccree device initialized (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8 stack backtrace: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x6c/0x90 dump_stack+0x14/0x1c __lock_acquire+0x904/0x1584 lock_acquire+0x220/0x34c _raw_spin_lock_irqsave+0x58/0x80 __pm_runtime_resume+0x38/0x88 sh_tmu_clock_event_set_oneshot+0x84/0xd4 clockevents_switch_state+0xfc/0x13c tick_broadcast_set_event+0x30/0xa4 __tick_broadcast_oneshot_control+0x1e0/0x3a8 tick_broadcast_oneshot_control+0x30/0x40 cpuidle_enter_state+0x40c/0x680 cpuidle_enter+0x30/0x40 do_idle+0x1f4/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x130 do_one_initcall+0x0/0x230 __primary_switched+0x88/0x90 For non-PREEMPT_RT builds this is not really an issue, but for PREEMPT_RT builds where normal spinlocks can sleep this might be an issue. Be cautious and always leave the power and clock running after probe. | ||||
| CVE-2026-8090 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-08 | 7.3 High |
| Use-after-free in the DOM: Networking component. This vulnerability was fixed in Firefox 150.0.2, Firefox ESR 140.10.2, Firefox ESR 115.35.2, Thunderbird 150.0.2, and Thunderbird 140.10.2. | ||||
| CVE-2026-43015 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: fix clk handling on PCI glue driver removal platform_device_unregister() may still want to use the registered clks during runtime resume callback. Note that there is a commit d82d5303c4c5 ("net: macb: fix use after free on rmmod") that addressed the similar problem of clk vs platform device unregistration but just moved the bug to another place. Save the pointers to clks into local variables for reuse after platform device is unregistered. BUG: KASAN: use-after-free in clk_prepare+0x5a/0x60 Read of size 8 at addr ffff888104f85e00 by task modprobe/597 CPU: 2 PID: 597 Comm: modprobe Not tainted 6.1.164+ #114 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x8d/0xba print_report+0x17f/0x496 kasan_report+0xd9/0x180 clk_prepare+0x5a/0x60 macb_runtime_resume+0x13d/0x410 [macb] pm_generic_runtime_resume+0x97/0xd0 __rpm_callback+0xc8/0x4d0 rpm_callback+0xf6/0x230 rpm_resume+0xeeb/0x1a70 __pm_runtime_resume+0xb4/0x170 bus_remove_device+0x2e3/0x4b0 device_del+0x5b3/0xdc0 platform_device_del+0x4e/0x280 platform_device_unregister+0x11/0x50 pci_device_remove+0xae/0x210 device_remove+0xcb/0x180 device_release_driver_internal+0x529/0x770 driver_detach+0xd4/0x1a0 bus_remove_driver+0x135/0x260 driver_unregister+0x72/0xb0 pci_unregister_driver+0x26/0x220 __do_sys_delete_module+0x32e/0x550 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 </TASK> Allocated by task 519: kasan_save_stack+0x2c/0x50 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x8e/0x90 __clk_register+0x458/0x2890 clk_hw_register+0x1a/0x60 __clk_hw_register_fixed_rate+0x255/0x410 clk_register_fixed_rate+0x3c/0xa0 macb_probe+0x1d8/0x42e [macb_pci] local_pci_probe+0xd7/0x190 pci_device_probe+0x252/0x600 really_probe+0x255/0x7f0 __driver_probe_device+0x1ee/0x330 driver_probe_device+0x4c/0x1f0 __driver_attach+0x1df/0x4e0 bus_for_each_dev+0x15d/0x1f0 bus_add_driver+0x486/0x5e0 driver_register+0x23a/0x3d0 do_one_initcall+0xfd/0x4d0 do_init_module+0x18b/0x5a0 load_module+0x5663/0x7950 __do_sys_finit_module+0x101/0x180 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 597: kasan_save_stack+0x2c/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x50 __kasan_slab_free+0x106/0x180 __kmem_cache_free+0xbc/0x320 clk_unregister+0x6de/0x8d0 macb_remove+0x73/0xc0 [macb_pci] pci_device_remove+0xae/0x210 device_remove+0xcb/0x180 device_release_driver_internal+0x529/0x770 driver_detach+0xd4/0x1a0 bus_remove_driver+0x135/0x260 driver_unregister+0x72/0xb0 pci_unregister_driver+0x26/0x220 __do_sys_delete_module+0x32e/0x550 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 | ||||
| CVE-2026-31463 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: iomap: fix invalid folio access when i_blkbits differs from I/O granularity Commit aa35dd5cbc06 ("iomap: fix invalid folio access after folio_end_read()") partially addressed invalid folio access for folios without an ifs attached, but it did not handle the case where 1 << inode->i_blkbits matches the folio size but is different from the granularity used for the IO, which means IO can be submitted for less than the full folio for the !ifs case. In this case, the condition: if (*bytes_submitted == folio_len) ctx->cur_folio = NULL; in iomap_read_folio_iter() will not invalidate ctx->cur_folio, and iomap_read_end() will still be called on the folio even though the IO helper owns it and will finish the read on it. Fix this by unconditionally invalidating ctx->cur_folio for the !ifs case. | ||||
| CVE-2026-43013 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: lag: Check for LAG device before creating debugfs __mlx5_lag_dev_add_mdev() may return 0 (success) even when an error occurs that is handled gracefully. Consequently, the initialization flow proceeds to call mlx5_ldev_add_debugfs() even when there is no valid LAG context. mlx5_ldev_add_debugfs() blindly created the debugfs directory and attributes. This exposed interfaces (like the members file) that rely on a valid ldev pointer, leading to potential NULL pointer dereferences if accessed when ldev is NULL. Add a check to verify that mlx5_lag_dev(dev) returns a valid pointer before attempting to create the debugfs entries. | ||||
| CVE-2026-31740 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: counter: rz-mtu3-cnt: do not use struct rz_mtu3_channel's dev member The counter driver can use HW channels 1 and 2, while the PWM driver can use HW channels 0, 1, 2, 3, 4, 6, 7. The dev member is assigned both by the counter driver and the PWM driver for channels 1 and 2, to their own struct device instance, overwriting the previous value. The sub-drivers race to assign their own struct device pointer to the same struct rz_mtu3_channel's dev member. The dev member of struct rz_mtu3_channel is used by the counter sub-driver for runtime PM. Depending on the probe order of the counter and PWM sub-drivers, the dev member may point to the wrong struct device instance, causing the counter sub-driver to do runtime PM actions on the wrong device. To fix this, use the parent pointer of the counter, which is assigned during probe to the correct struct device, not the struct device pointer inside the shared struct rz_mtu3_channel. | ||||
| CVE-2026-31443 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix crash when the event log is disabled If reporting errors to the event log is not supported by the hardware, and an error that causes Function Level Reset (FLR) is received, the driver will try to restore the event log even if it was not allocated. Also, only try to free the event log if it was properly allocated. | ||||
| CVE-2026-31749 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: ni_atmio16d: Fix invalid clean-up after failed attach If the driver's COMEDI "attach" handler function (`atmio16d_attach()`) returns an error, the COMEDI core will call the driver's "detach" handler function (`atmio16d_detach()`) to clean up. This calls `reset_atmio16d()` unconditionally, but depending on where the error occurred in the attach handler, the device may not have been sufficiently initialized to call `reset_atmio16d()`. It uses `dev->iobase` as the I/O port base address and `dev->private` as the pointer to the COMEDI device's private data structure. `dev->iobase` may still be set to its initial value of 0, which would result in undesired writes to low I/O port addresses. `dev->private` may still be `NULL`, which would result in null pointer dereferences. Fix `atmio16d_detach()` by checking that `dev->private` is valid (non-null) before calling `reset_atmio16d()`. This implies that `dev->iobase` was set correctly since that is set up before `dev->private`. | ||||
| CVE-2026-43050 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix use-after-free in sock_def_readable() A race condition exists between lec_atm_close() setting priv->lecd to NULL and concurrent access to priv->lecd in send_to_lecd(), lec_handle_bridge(), and lec_atm_send(). When the socket is freed via RCU while another thread is still using it, a use-after-free occurs in sock_def_readable() when accessing the socket's wait queue. The root cause is that lec_atm_close() clears priv->lecd without any synchronization, while callers dereference priv->lecd without any protection against concurrent teardown. Fix this by converting priv->lecd to an RCU-protected pointer: - Mark priv->lecd as __rcu in lec.h - Use rcu_assign_pointer() in lec_atm_close() and lecd_attach() for safe pointer assignment - Use rcu_access_pointer() for NULL checks that do not dereference the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and lecd_attach() - Use rcu_read_lock/rcu_dereference/rcu_read_unlock in send_to_lecd(), lec_handle_bridge() and lec_atm_send() to safely access lecd - Use rcu_assign_pointer() followed by synchronize_rcu() in lec_atm_close() to ensure all readers have completed before proceeding. This is safe since lec_atm_close() is called from vcc_release() which holds lock_sock(), a sleeping lock. - Remove the manual sk_receive_queue drain from lec_atm_close() since vcc_destroy_socket() already drains it after lec_atm_close() returns. v2: Switch from spinlock + sock_hold/put approach to RCU to properly fix the race. The v1 spinlock approach had two issues pointed out by Eric Dumazet: 1. priv->lecd was still accessed directly after releasing the lock instead of using a local copy. 2. The spinlock did not prevent packets being queued after lec_atm_close() drains sk_receive_queue since timer and workqueue paths bypass netif_stop_queue(). Note: Syzbot patch testing was attempted but the test VM terminated unexpectedly with "Connection to localhost closed by remote host", likely due to a QEMU AHCI emulation issue unrelated to this fix. Compile testing with "make W=1 net/atm/lec.o" passes cleanly. | ||||
| CVE-2026-23868 | 2 Giflib, Giflib Project | 2 Giflib, Giflib | 2026-05-07 | 5.1 Medium |
| Giflib contains a double-free vulnerability that is the result of a shallow copy in GifMakeSavedImage and incorrect error handling. The conditions needed to trigger this vulnerability are difficult but may be possible. | ||||