| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not show buffer_meta for CPUs without a buffer
The per_cpu/cpuN/buffer_meta files are created for every possible CPU,
but buffer->buffers[cpu] is only allocated once that CPU comes online.
Reading the file of a CPU that never came online dereferences a NULL
cpu_buffer in rbm_start().
Fail the open with -ENODEV when the CPU has no buffer, as the other
per CPU ring buffer interfaces do. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx()
On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one
sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[]
shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma()
dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader()
writes two such indices into meta->buffers[], which rb_cpu_meta_valid()
would reject on the next boot, discarding the previous boot's trace.
A CPU's sub-buffer array starts after its meta header and the nr_subbufs
integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx()
inverts that calculation but skips only the integers, not the header, so
its base is one sub-buffer low whenever the omitted header size crosses
the alignment boundary.
Invert the calculation with rb_subbufs_from_meta() rather than repeating
it. rb_range_buffer() maps an index back to an address through the same
helper, so the two directions can no longer disagree. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix false warning in ring_buffer_map_get_reader()
The mmap reader can warn when it catches up with a writer that is still
committing events. rb_get_reader_page() returns NULL in this case, but
ring_buffer_map_get_reader() treats that result as an error.
The initial rb_per_cpu_empty() check filters out an empty buffer, but it
does not guarantee that the next reader page has committed data. Writers
do not take reader_lock and can advance commit_page before publishing the
committed length on the new page. rb_get_reader_page() can swap to that
page, catch up with the writer and return NULL.
Handle NULL through the existing no-data exit without warning. Remove the
caller's reader_page == commit_page check as well, since the reader-page
helper already handles that case. The existing metadata update and return
path remain in place. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: bsg: Pass reply_len to bsg_setup_queue() to fit UFS ARPMB replies
bsg-lib allocates a 96-byte (SCSI_SENSE_BUFFERSIZE) reply buffer per
job, but struct ufs_rpmb_reply is 104 bytes: a 40-byte struct
ufs_bsg_reply followed by a 64-byte EHS. When an Advanced RPMB command
returns an EHS, ufshcd_advanced_rpmb_req_handler() copies it right after
the 40-byte header and writes 8 bytes past the end of the buffer.
Let each BSG transport pass its reply buffer size to bsg_setup_queue()
and have ufs_bsg request sizeof(struct ufs_rpmb_reply), so the full
reply reaches user space. Other transports keep SCSI_SENSE_BUFFERSIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: st: Fix use-after-free race between st_remove() and st_open()
st_remove() drops the probe reference on the scsi_tape with kref_put()
and only afterwards removes its index from st_index_idr. If that was the
last reference, scsi_tape_release() frees the structure while it is
still published in the idr.
scsi_tape_get(), called from st_open(), looks up the tape in
st_index_idr and takes a reference under st_ref_mutex and
st_index_lock. remove_cdevs() does not wait for opens that are already
past chrdev_open(), so an open that is blocked on st_ref_mutex while
st_remove() holds it can take the mutex as soon as st_remove() drops it,
find the freed tpnt in the idr and call kref_get() on it:
BUG: KASAN: slab-use-after-free in st_open
Write of size 4 ...
st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291)
chrdev_open
...
Freed by task ...:
kfree
st_remove (drivers/scsi/st.c:4512)
Remove the index from the idr before dropping the reference, all under
st_ref_mutex. A concurrent scsi_tape_get() now either runs first and
holds a valid reference that keeps the tape alive, or runs afterwards
and finds nothing, so st_open() fails with -ENXIO.
This restores the ordering st_remove() had before the conversion to
st_index_idr, where the tape was unpublished from scsi_tapes[] before
the final kref_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen/scsifront: Check for a NULL shadow entry on a backend response
scsifront_do_response() validates the rqid in a backend response against
VSCSIIF_MAX_REQS before using it to index info->shadow[], but then
dereferences the entry to test ->inflight without checking that the slot
is populated. Shadow slots are NULL before a command is submitted (the
host private area is zeroed at allocation) and are reset to NULL in
_scsifront_put_rqid() once a request completes, so an in-range rqid that
does not correspond to an outstanding request makes the frontend
dereference a NULL pointer.
A malicious or buggy backend can thus crash the guest by returning a
response whose rqid is in range but not in flight -- for example a
spurious response before any command has been issued, or a duplicate of
one already completed. The ring has only VSCSIIF_MAX_REQS (16) slots,
so before the first command every in-range rqid selects a NULL slot.
Reject a response whose shadow slot is not populated. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Reject a negative task index from parse_pdu_itt
A transport that implements parse_pdu_itt hands libiscsi an index taken
from the PDU, and both lookups bound it from above only:
if (i >= session->cmds_max)
i and cmds_max are both int, so a negative index passes and
session->cmds[i] is read from before the array.
be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag,
*index = (int)itt;
and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the
hardware async ring without replacing its ITT, so the value is the
target's. It also reports the session's own age rather than the one in
the tag, which leaves the age comparison in iscsi_verify_itt() with
nothing to reject.
Bound the index from below in both lookups. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Validate the ITT reflected in a Reject PDU
A Reject PDU carries a copy of the header it rejects, and
iscsi_handle_reject() takes the ITT out of that copy to find the task to
clean up:
memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr));
...
task = iscsi_itt_to_task(conn, rejected_pdu.itt);
That value is whatever the target put there. iscsi_itt_to_task() bounds
the index against cmds_max and checks nothing else, so any task in the
pool can be named, and iscsi_nop_out_rsp() then completes it.
An index that has never been used gives a NULL task->conn: the pool is
zeroed at session setup and conn is assigned only when a task is
allocated. If the task was used and returned, iscsi_complete_task() hits
its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount
underflows. An in-flight SCSI command is completed as successful - a 1
MiB read returned 1048576 with none of its buffer written and no
warning.
Validate the reflected ITT the way iscsi_itt_to_ctask() validates a
command ITT, and require the task to be in flight and not a SCSI
command.
[ 6.248477] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI
[ 6.249357] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
[ 6.249951] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy)
[ 6.250718] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 6.251616] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160
[ 6.252043] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00
[ 6.252813] RSP: 0018:ffff88806c907b80 EFLAGS: 00010206
[ 6.253042] RAX: dffffc0000000000 RBX: ffff88800607e000 RCX: ffffffff8d571a25
[ 6.253345] RDX: 000000000000000c RSI: ffff88806c907c38 RDI: 0000000000000060
[ 6.253642] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff235a504
[ 6.253947] R10: 0000000000000003 R11: 7463656e6e6f6320 R12: 0000000000000000
[ 6.254251] R13: 0000000000000000 R14: ffff88806c907c38 R15: 0000000000000000
[ 6.254549] FS: 0000000000000000(0000) GS:ffff8880d95bc000(0000) knlGS:0000000000000000
[ 6.254887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.255140] CR2: 00007fc393e8ffc0 CR3: 0000000005252006 CR4: 0000000000770ef0
[ 6.255439] PKRU: 55555554
[ 6.255564] Call Trace:
[ 6.255674] <IRQ>
[ 6.255768] __iscsi_complete_pdu+0x18bf/0x22a0
[ 6.256733] iscsi_complete_pdu+0x54/0xa0
[ 6.256905] iscsi_tcp_data_recv_done+0xf4/0x250
[ 6.257103] iscsi_tcp_recv_skb+0x31e/0xec0
[ 6.257680] iscsi_sw_tcp_recv+0x12f/0x390
[ 6.258061] __tcp_read_sock+0x1ab/0x810
[ 6.258853] iscsi_sw_tcp_data_ready+0x18b/0x510
[ 6.259808] tcp_data_queue+0x1f13/0x4cd0
[ 6.260567] tcp_rcv_established+0x8a5/0x3a00
[ 6.261931] tcp_v4_do_rcv+0x449/0x960
[ 6.262269] tcp_v4_rcv+0x2245/0x3bc0 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Validate the task named by a management response
__iscsi_complete_pdu() fetches the task for five response types from one
place and checks only that the index resolved:
case ISCSI_OP_LOGOUT_RSP:
case ISCSI_OP_LOGIN_RSP:
case ISCSI_OP_TEXT_RSP:
case ISCSI_OP_SCSI_TMFUNC_RSP:
case ISCSI_OP_NOOP_IN:
task = iscsi_itt_to_task(conn, hdr->itt);
if (!task)
return ISCSI_ERR_BAD_ITT;
iscsi_itt_to_task() bounds the index against cmds_max and looks at
nothing else, so a target can name any slot in the pool, including one
that has never been used. task->conn is then NULL, and both
iscsi_nop_out_rsp() and iscsi_complete_task() dereference it. One
unsolicited NOP-In is enough; a Text Response carrying the same ITT
crashes in iscsi_complete_task() instead.
Require the task to be in flight and not a SCSI command, the way
iscsi_itt_to_ctask() does for the command opcodes.
[ 6.298634] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI
[ 6.298642] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
[ 6.298652] CPU: 1 UID: 0 PID: 111 Comm: iscsistart Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy)
[ 6.298654] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 6.298656] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160
[ 6.298691] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00
[ 6.298698] RSP: 0018:ffff88806c907be8 EFLAGS: 00010206
[ 6.298701] RAX: dffffc0000000000 RBX: ffff888006116800 RCX: 0000000000000020
[ 6.298702] RDX: 000000000000000c RSI: ffff88800525d578 RDI: 0000000000000060
[ 6.298703] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 6.298706] R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000
[ 6.298706] R13: 000000000000002e R14: ffff8880056eb440 R15: ffff888006116800
[ 6.298707] FS: 00007fc02d1c2740(0000) GS:ffff8880b29bc000(0000) knlGS:0000000000000000
[ 6.298710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.298711] CR2: 000055fe3b56ddf8 CR3: 00000000053b9004 CR4: 0000000000770ef0
[ 6.298712] PKRU: 55555554
[ 6.298713] Call Trace:
[ 6.298714] <IRQ>
[ 6.298714] __iscsi_complete_pdu+0x13a8/0x22a0
[ 6.298758] iscsi_complete_pdu+0x54/0xa0
[ 6.298759] iscsi_tcp_hdr_recv_done+0x870/0x2c80
[ 6.298778] iscsi_tcp_recv_skb+0x31e/0xec0
[ 6.298800] iscsi_sw_tcp_recv+0x12f/0x390
[ 6.298804] __tcp_read_sock+0x1ab/0x810
[ 6.298812] iscsi_sw_tcp_data_ready+0x18b/0x510
[ 6.298814] tcp_rcv_established+0x1f56/0x3a00
[ 6.298842] tcp_v4_do_rcv+0x449/0x960
[ 6.298847] tcp_v4_rcv+0x2245/0x3bc0 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL sink dereference in USB4 bandwidth functions
allocate_usb4_bandwidth_for_stream() and allocate_usb4_bandwidth() both
use ASSERT(stream->sink) before dereferencing stream->sink->link. ASSERT
is compiled out in production builds, so a NULL stream->sink causes a
NULL pointer dereference.
link_set_dpms_off() already guards two earlier accesses to stream->sink
with explicit NULL checks, confirming that stream->sink can legitimately
be NULL. The subsequent call to deallocate_usb4_bandwidth() had no
equivalent guard.
Replace the ASSERT() calls with proper NULL checks that return false
early, and add a matching stream->sink guard at the call site in
link_set_dpms_off() consistent with the surrounding pattern.
v2: Keep the existing ASSERT() calls for diagnostics (to report
unexpected NULL sink), and add explicit NULL checks that return false
before dereferencing stream->sink. Also add a matching stream->sink
guard at the deallocation call site in link_set_dpms_off(). (Alex)
(cherry picked from commit 98029a0ce61feb52c563f65349dd9b25f672e355) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: don't drop the runtime PM reference twice in amdgpu_gpr
amdgpu_debugfs_gpr_read() drops its runtime PM reference right after
reading the wave registers. When copying them to userspace fails, it
jumps to the err label, which drops the reference a second time. A read
into a bad buffer on Navi31 either steals a reference somebody else
holds (power/runtime_usage goes from 1 to 0) or underflows the count:
amdgpu 0000:03:00.0: Runtime PM usage count underflow!
The registers are already in the kernel buffer at that point, so finish
the hardware access first and copy the buffer with a single
copy_to_user() instead of the put_user() loop with its own error path.
(cherry picked from commit 31035bbd74f7c3e10c163db875b8e67f8b50ee6a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix GEM object leak on ENOMEM in userptr ioctl
When amdgpu_hmm_range_alloc() fails amdgpu_gem_userptr_ioctl() returns
-ENOMEM right away and skips the cleanup every other error path goes
through. The GEM object, the bo->parent reference on the VM root and the
MMU notifier registration are all left behind.
Use release_object here, not user_pages_done, range is still NULL at
this point.
(cherry picked from commit bbe739e407a542073ec1a7872b14843566b4919e) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: keep the eviction fence until the last handle is closed
amdgpu_gem_object_close() detaches the user queue eviction fence from
the BO before it checks bo_va->ref_count, so closing any handle of a BO
removes the fence, even when the file still has another handle to the
BO and the bo_va with its GPU mappings stays. The BO can then be evicted
without suspending the user queues of the file, which keep accessing it
through mappings that are only marked for update.
Seen on navi31 with a SDMA user queue: a BO opened twice in the same
file (GEM_FLINK + GEM_OPEN) loses its eviction fence when the second
handle is closed (traced attach/detach of the fence):
attach bo=ffff8c78a6c84c00
GEM_CLOSE handle=7
detach bo=ffff8c78a6c84c00
while handle 6 and the mapping are still in use.
Only detach the fence when the last reference to the bo_va goes away,
matching amdgpu_gem_object_open(), which attaches it only when the
bo_va is created. With this the fence stays until the file is closed.
(cherry picked from commit 8387982f03d4026b7dc11b0b5e3118298eee4d6a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exec: don't immediately add prelocked obj to array of locked objs
When a contention is detected the drm_exec object grabs a reference to
the contended object, unlocks all other objects and pre-locks the
contended one before anything else.
The problem is that it is possible that this pre-locked object was about
to be destroyed and drm_exec is now holding the last reference to it.
So we never actually see this pre-locked object again to be explicitly
locked and so also never reserve a slot for a dma_fence object on it.
Should the driver now use drm_exec_for_each_locked_object() to add a new
fence to all locked objects we eventually see a warning or even a
BUG_ON() to prevent random memory corruption.
Fix this by keeping the prelocked object out of the array of locked objs
until it was explicitly mentioned by the driver again.
If the prelocked object is never mentioned again by the driver
just unlock and drop the reference at the end of the locking loop. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dmc: Add sanity check for DMC load address
For DMC firmware header version 3, the firmware load address is stored
in dmc_info->start_mmioaddr and later used by dmc_load_program().
Unlike the MMIO address table, the firmware load address is not
validated. Add a sanity check to ensure it is within the valid range.
BSpec: 69671, 68378
(cherry picked from commit 5e47ee5c76ca9becde8df4ad5202845b7ffcbc4c) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Don't transfer shrinker pages for pinned bos on purgeable state change
Pinned bos have their pages removed from the shrinker's shrinkable /
purgeable counts on pin, and added back on unpin according to the
bo's purgeable state at that time.
However, xe_bo_set_purgeable_shrinker() unconditionally transfers
pages between the shrinkable and purgeable counts. If the purgeable
state of a pinned bo changes, for example by userspace madvising
DONTNEED on a VMA of a bo that is also pinned as a scanout buffer,
this underflows one count and, after unpin, leaves the other one
permanently inflated.
Only update the purgeable flag for pinned bos, and leave the page
accounting to unpin.
(cherry picked from commit afe6bc012034123fd838328668e609bf57e46bd3) |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix use-after-free of a destroyed user DSQ by a deferred reenqueue
A deferred reenqueue can read a freed user DSQ. The request stays on its
CPU's deferred list until run_deferred() takes it, and the RCU callback that
frees the DSQ assumes that the grace period has flushed it, so exit_dsq()
checks the per-CPU node without the deferred list lock. A grace period waits
for readers in flight, not for a pending run_deferred(). A run_deferred()
which starts after the grace period began can detach the request right
before the callback looks and then read the freed DSQ's id.
Cancel the pending requests before the grace period instead. The irq work
that frees the DSQ unlinks every CPU's request under the per-CPU deferred
list lock, and schedule_dsq_reenq() ignores a new request under the same
lock once the id is invalid. Only a run_deferred() that started before the
grace period can hold a request, and it runs with IRQs disabled, so the
grace period waits for it and nothing touches the DSQ after the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Keep the predicate limit separate from program capacity
predicate_parse() adds two to nr_preds to reserve the terminal TRUE
and FALSE entries. It also uses that increased value as the limit for
parsed predicates. If the initial count is smaller than the number
actually parsed, the program can fill the allocation and subsequent
accesses can go past its end.
Keep nr_preds as the predicate limit and use a separate value for the
allocation size. This leaves space for both terminal entries and a
zeroed entry when parsing stops at the limit. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Check operator stack capacity before pushing
predicate_parse() uses the first operator stack entry before processing
any opening parentheses. A push then increments top before writing.
The existing check still permits that write when top already points to
the last allocated entry, which can access beyond the operator stack.
Reject the push when top reaches the last allocated entry. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash in print_graph_function_event()
tracing_set_tracer() assigns the flags of the newly selected tracer
with:
tr->current_trace_flags = t->flags ? : t->tracer->flags;
If the new tracer defines neither static flags nor default flags, like
hwlat, irqsoff or wakeup, add_tracer() has no per instance flags copy
for it, and both operands are NULL, so tr->current_trace_flags ends up
being NULL as well.
The ring buffer is not cleared when switching tracers: it is reset
inside tracer_init(), after current_trace_flags was already assigned.
If the buffer still holds function_graph entries of the previous
tracer, printing one of them dereferences the NULL pointer. This was
hit by cat trace during an ftrace stress test:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
RIP: 0010:print_graph_function_event+0xe/0x20
Call Trace:
s_show+0x4d/0x110
seq_read_iter+0x2d4/0x490
seq_read+0x130/0x170
vfs_read+0xb5/0x370
ksys_read+0x6d/0xe0
do_syscall_64+0xbc/0x450
The snapshot buffer is not reset at all, so this can be reproduced
without a race:
echo function_graph > /sys/kernel/tracing/current_tracer
echo 1 > /sys/kernel/tracing/snapshot
echo hwlat > /sys/kernel/tracing/current_tracer
cat /sys/kernel/tracing/snapshot
Rather than teaching every user of tr->current_trace_flags about this
corner case, make sure it is never NULL: when the newly selected
tracer has no flags at all, tracing_set_tracer() falls back to a
static empty no_tracer_flags. run_tracer_selftest() can hit the same
case, so the same fallback is added there too. The existing users
already handle opts == NULL, so these tracers keep behaving as before. |
