Export limit exceeded: 415487 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (4807 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-34118 | 1 Tp-link | 3 Tapo C520ws, Tapo C520ws Firmware, Tapo C520ws V2 | 2026-10-19 | 6.5 Medium |
| A heap-based buffer overflow vulnerability was identified in TP-Link Tapo C100/C101 v5, C210 v3.6 and C520WS v2.6 in the HTTP POST body parsing logic due to missing validation of remaining buffer capacity after dynamic allocation, due to insufficient boundary validation when handling externally supplied HTTP input. An attacker on the same network segment could trigger heap memory corruption conditions by sending crafted payloads that cause write operations beyond allocated buffer boundaries. Successful exploitation causes a Denial-of-Service (DoS) condition, causing the device’s process to crash or become unresponsive. | ||||
| CVE-2026-64558 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Check length in pkey_pckmo handler implementation Explicitly check the length of the target buffer in the pkey_pckmo implementation of the key_to_protkey() handler function. The handler function fails, if the generated output data exceeds the length of the provided target buffer. | ||||
| CVE-2026-64552 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio-net: fix len check in receive_big() receive_big() bounds the device-announced length by (big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose: add_recvbuf_big() sets sg[1] to start at offset sizeof(struct padded_vnet_hdr) into the first page, so the chain actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) + big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the check allows for the common hdr_len == 12 case. A malicious virtio backend can announce a len in that gap. page_to_skb() then walks one frag past the page chain, storing a NULL page->private into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds write past the static frag array and a NULL frag handed up the rx path. Bound len by the size add_recvbuf_big() actually advertised. | ||||
| CVE-2026-63939 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Compute the correct max length of the in-GHCB scratch area When setting the length of the GHCB scratch area, and the area is in the GHCB shared buffer, set the effective length of the scratch area to the max possible size given the start of the guest-provided pointer, and the end of the shared buffer. The code was "fine" when first introduced, as KVM doesn't consult the length of the buffer when emulating MMIO, because the passed in @len always specifies the *max* size required. But for PSC requests, the incoming @len is just the minimum length (to process the header), and KVM needs to know the full size of the scratch area to avoid buffer overflows (spoiler alert). Opportunistically rename @len => @min_len to better reflect its role. | ||||
| CVE-2026-53209 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend Existing advertising instances can already hold the maximum extended advertising payload. When hci_adv_bcast_annoucement() prepends the Broadcast Announcement service data to that payload, the combined data may no longer fit in the temporary buffer used to rebuild the advertising data. Reject that case before copying the existing payload and report the failure through the device log. This keeps the existing advertising data intact and avoids overrunning the temporary buffer. | ||||
| CVE-2026-52908 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA: During rereg_mr ensure that REREG_ACCESS is compatible If IB_MR_REREG_ACCESS changes from RO to RW then the umem has to be re-evaluated to ensure it is properly pinned as RW. Since the umem is hidden inside each driver's mr struct add a ib_umem_check_rereg() function that each driver has to call before processing IB_MR_REREG_ACCESS. mlx4 has to retain its duplicate ib_access_writable check because it implements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both items in place sequentially while the MR is live, so it will continue to not support this combination. | ||||
| CVE-2026-46253 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pstore/ram: fix buffer overflow in persistent_ram_save_old() persistent_ram_save_old() can be called multiple times for the same persistent_ram_zone (e.g., via ramoops_pstore_read -> ramoops_get_next_prz for PSTORE_TYPE_DMESG records). Currently, the function only allocates prz->old_log when it is NULL, but it unconditionally updates prz->old_log_size to the current buffer size and then performs memcpy_fromio() using this new size. If the buffer size has grown since the first allocation (which can happen across different kernel boot cycles), this leads to: 1. A heap buffer overflow (OOB write) in the memcpy_fromio() calls 2. A subsequent OOB read when ramoops_pstore_read() accesses the buffer using the incorrect (larger) old_log_size The KASAN splat would look similar to: BUG: KASAN: slab-out-of-bounds in ramoops_pstore_read+0x... Read of size N at addr ... by task ... The conditions are likely extremely hard to hit: 0. Crash with a ramoops write of less-than-record-max-size bytes. 1. Reboot: ramoops registers, pstore_get_records(0) reads old crash, allocates old_log with size X 2. Crash handler registered, timer started (if pstore_update_ms >= 0) 3. Oops happens (non-fatal, system continues) 4. pstore_dump() writes oops via ramoops_pstore_write() size Y (>X) 5. pstore_new_entry = 1, pstore_timer_kick() called 6. System continues running (not a panic oops) 7. Timer fires after pstore_update_ms milliseconds 8. pstore_timefunc() → schedule_work() → pstore_dowork() → pstore_get_records(1) 9. ramoops_get_next_prz() → persistent_ram_save_old() 10. buffer_size() returns Y, but old_log is X bytes 11. Y > X: memcpy_fromio() overflows heap Requirements: - a prior crash record exists that did not fill the record size (almost impossible since the crash handler writes as much as it can possibly fit into the record, capped by max record size and the kmsg buffer almost always exceeds the max record size) - pstore_update_ms >= 0 (disabled by default) - Non-fatal oops (system survives) Free and reallocate the buffer when the new size differs from the previously allocated size. This ensures old_log always has sufficient space for the data being copied. | ||||
| CVE-2026-43329 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups. | ||||
| CVE-2026-43186 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data() On the receive path, __ioam6_fill_trace_data() uses trace->nodelen to decide how much data to write for each node. It trusts this field as-is from the incoming packet, with no consistency check against trace->type (the 24-bit field that tells which data items are present). A crafted packet can set nodelen=0 while setting type bits 0-21, causing the function to write ~100 bytes past the allocated region (into skb_shared_info), which corrupts adjacent heap memory and leads to a kernel panic. Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to derive the expected nodelen from the type field, and use it: - in ioam6_iptunnel.c (send path, existing validation) to replace the open-coded computation; - in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose nodelen is inconsistent with the type field, before any data is written. Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to 0xff1ffc00). | ||||
| CVE-2026-43150 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/arm-cmn: Reject unsupported hardware configurations So far we've been fairly lax about accepting both unknown CMN models (at least with a warning), and unknown revisions of those which we do know, as although things do frequently change between releases, typically enough remains the same to be somewhat useful for at least some basic bringup checks. However, we also make assumptions of the maximum supported sizes and numbers of things in various places, and there's no guarantee that something new might not be bigger and lead to nasty array overflows. Make sure we only try to run on things that actually match our assumptions and so will not risk memory corruption. We have at least always failed on completely unknown node types, so update that error message for clarity and consistency too. | ||||
| CVE-2026-31402 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request. | ||||
| CVE-2026-23466 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Open-code GGTT MMIO access protection GGTT MMIO access is currently protected by hotplug (drm_dev_enter), which works correctly when the driver loads successfully and is later unbound or unloaded. However, if driver load fails, this protection is insufficient because drm_dev_unplug() is never called. Additionally, devm release functions cannot guarantee that all BOs with GGTT mappings are destroyed before the GGTT MMIO region is removed, as some BOs may be freed asynchronously by worker threads. To address this, introduce an open-coded flag, protected by the GGTT lock, that guards GGTT MMIO access. The flag is cleared during the dev_fini_ggtt devm release function to ensure MMIO access is disabled once teardown begins. (cherry picked from commit 4f3a998a173b4325c2efd90bdadc6ccd3ad9a431) | ||||
| CVE-2026-23178 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report() `i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data into `ihid->rawbuf`. The former can come from the userspace in the hidraw driver and is only bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set `max_buffer_size` field of `struct hid_ll_driver` which we do not). The latter has size determined at runtime by the maximum size of different report types you could receive on any particular device and can be a much smaller value. Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`. The impact is low since access to hidraw devices requires root. | ||||
| CVE-2025-68795 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: Avoid overflowing userspace buffer on stats query The ethtool -S command operates across three ioctl calls: ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and ETHTOOL_GSTATS for the values. If the number of stats changes between these calls (e.g., due to device reconfiguration), userspace's buffer allocation will be incorrect, potentially leading to buffer overflow. Drivers are generally expected to maintain stable stat counts, but some drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making this scenario possible. Some drivers try to handle this internally: - bnad_get_ethtool_stats() returns early in case stats.n_stats is not equal to the driver's stats count. - micrel/ksz884x also makes sure not to write anything beyond stats.n_stats and overflow the buffer. However, both use stats.n_stats which is already assigned with the value returned from get_sset_count(), hence won't solve the issue described here. Change ethtool_get_strings(), ethtool_get_stats(), ethtool_get_phy_stats() to not return anything in case of a mismatch between userspace's size and get_sset_size(), to prevent buffer overflow. The returned n_stats value will be equal to zero, to reflect that nothing has been returned. This could result in one of two cases when using upstream ethtool, depending on when the size change is detected: 1. When detected in ethtool_get_strings(): # ethtool -S eth2 no stats available 2. When detected in get stats, all stats will be reported as zero. Both cases are presumably transient, and a subsequent ethtool call should succeed. Other than the overflow avoidance, these two cases are very evident (no output/cleared stats), which is arguably better than presenting incorrect/shifted stats. I also considered returning an error instead of a "silent" response, but that seems more destructive towards userspace apps. Notes: - This patch does not claim to fix the inherent race, it only makes sure that we do not overflow the userspace buffer, and makes for a more predictable behavior. - RTNL lock is held during each ioctl, the race window exists between the separate ioctl calls when the lock is released. - Userspace ethtool always fills stats.n_stats, but it is likely that these stats ioctls are implemented in other userspace applications which might not fill it. The added code checks that it's not zero, to prevent any regressions. | ||||
| CVE-2026-85316 | 1 Apache | 2 Apache Camel, Camel | 2026-10-19 | 4.8 Medium |
| Insufficient Granularity of Access Control vulnerability in Apache Camel Platform HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The component decided whether an endpoint ran in proxy mode by testing whether its configured path started with the string proxy, rather than by matching the path exactly. Any endpoint whose path merely begins with those characters - proxyStatus, proxy-config, proxying and so on - therefore became a proxy endpoint without the route author asking for it. A proxy endpoint forwards requests onward, so an endpoint that was intended to serve its own content instead relays traffic on behalf of whoever calls it, which is both a request forgery primitive and an exposure of whatever the forwarding path can reach. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Proxy mode is now selected by an exact path match rather than by prefix. For deployments that cannot upgrade immediately, rename any endpoint path that begins with proxy but is not intended to be a proxy. | ||||
| CVE-2026-112021 | 1 Grunfink | 1 Snac2 | 2026-10-19 | 7.5 High |
| snac2 before 2.93 contains a heap-based buffer overflow vulnerability in _xs_json_load_lexer() that allows unauthenticated remote attackers to corrupt heap memory by sending JSON strings containing a \u0000 escape. Attackers can send a single crafted application/activity+json POST to activitypub_post_handler(), which parses it before signature checks, overflowing heap allocations and crashing the server. | ||||
| CVE-2026-90052 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-55246 | 1 Tatsh | 1 Bincookie | 2026-10-19 | 7.8 High |
| bincookie is a header-only binarycookies parser. Prior to 0.1.9, bincookie_init_file() in bincookie.h allocates a buffer using the actual .binarycookies file length but trusts the file-controlled num_pages field as the loop bound for byte-swapping page_sizes entries. A crafted file can make the loop read and write beyond the heap allocation, and related unvalidated page sizes and cookie_offsets can drive additional out-of-bounds accesses in page and cookie iteration. Applications that parse an attacker-supplied binarycookies file may crash or suffer heap corruption that can potentially enable code execution. This issue is fixed in version 0.1.9. | ||||
| CVE-2026-56208 | 2 Aomedia, Redhat | 14 Libaom, Ai Inference Server, Enterprise Linux and 11 more | 2026-10-19 | 7.6 High |
| A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution. | ||||
| CVE-2026-98570 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: keep room for the mac header in dst_dev_overhead() The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as the length they are about to push plus dst_dev_overhead(), then push the new headers and rebuild the mac header below them with skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom, but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device, 16 bytes for plain Ethernet. Where the mac header is longer than that, as it is on ingress through a VLAN device with reorder_hdr off, the rebuild runs out of room: skb_set_mac_header(skb, -skb->mac_len) computes a negative offset, stores it unchecked in the u16 skb->mac_header, and the memmove that follows writes skb->mac_len bytes about 64 KB past skb->head. Forwarding plain ping6 traffic through such a device reproduces it on all five seg6 encapsulation modes and on the rpl and ioam6 inline paths; skb->mac_header comes back as 65534 on a 704-byte head. Return the larger of the two. The helper already returns skb->mac_len when it has no dst, so this only makes the other branch agree, and it covers every caller rather than each call site in turn. | ||||