| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Wp Social Login and Register Social Counter plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 3.2.2. This is due to the social login REST callback registered at `/wp-json/wslu-social-login/type/{provider}/` with `permission_callback => __return_true` locating an existing WordPress account solely by the email string returned from the OAuth provider and calling `wp_set_auth_cookie()` without a password check, while the only verification guard — `!empty($getProfile->emailVerified)` in `inc/admin-create-user.php` — is a no-op for the bundled Hybridauth Facebook and Twitter adapters, both of which assign the raw email string rather than a boolean verified flag to `emailVerified`. This makes it possible for unauthenticated attackers to obtain a fully authenticated session as any existing WordPress user, including Administrators, whose registered email address can be presented through a configured Facebook or Twitter login on the target site. Exploitation requires only that the attacker control an OAuth account whose provider-returned email matches the target account's registered WordPress email address; no local credentials, nonce, or prior foothold is needed. |
| The Ultra Addons for Contact Form 7 plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the _getObjAttr function in all versions up to, and including, 3.5.54. This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). This requires the PDF Generator add-on to be active and a Contact Form 7 form to be configured for PDF generation, as the WPCF7_Submission POP gadget chain relies on CF7 being present to complete the file deletion via __destruct(). Note: This vulnerability can only be exploited when the PDF generator feature is enabled. |
| fastapi-code-generator creates FastAPI applications from OpenAPI files. Prior to 0.8.1, the generator inserts an additional response status-code key into the generated responses={...} route-decorator dictionary as a single-quoted Python string without escaping embedded quotes. A multi-response OpenAPI operation with an attacker-controlled or attacker-influenced second non-primary response key can close the dictionary-key literal and inject a valid Python expression. Syntax-breaking input only causes generation to fail, but syntactically valid generated code executes with the application's or CI process's privileges when the generated module is imported and its decorator arguments are evaluated. This additional-response-key sink is distinct from the project's separate route-path and operation-summary sinks. This issue is fixed in version 0.8.1. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the four non-secure-callable secure stack functions of the TrustZone-M ports dereference a thread pointer supplied by the non-secure world without checking that it points to non-secure memory. Non-secure code can make the secure firmware reveal which secure bytes are zero, write chosen secure words, and fault the secure world, breaking TrustZone-M isolation and enabling recovery of secure-world secrets such as cryptographic keys. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 8.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: SQR). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in PeopleSoft Enterprise PeopleTools, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 6.9 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:R/S:C/C:N/I:H/A:H). |
| An issue in the GraphQL endpoint of traggo server v0.8.3 allows attackers to cause a Denial of Service (DoS) via a crafted POST request to the GraphQL endpoint |
| In onCreate of SettingsApplication.java, there is a possible cross-profile consent dialog label injection due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: don't hide a link from cancellations
A task that exits cancels its tracked requests and waits until they are
gone. io_uring_cancel_generic() looks everywhere a request can be, and
goes to sleep if it found nothing to cancel. It is woken up each time
one of the requests of the task is completed by task work or freed.
When io-wq is done with a request that has a link, there is a time in which
the next request of the link can't be found:
io_worker_handle_work()
io_assign_current_work(worker, NULL)
io_wq_free_work(work)
io_req_find_next() // takes the link off the request
io_free_req() // task work for the task
io_assign_current_work(worker, linked)
io_run_task_work()
cond_resched()
worker->cur_work = linked
It is not pending, it is not the current work of a worker, and it is not
yet on the list that it is about to be parked on. If the pass that the
exiting task makes because of io_free_req() falls into that time, it finds
nothing and the task goes to sleep. The worker then runs the link, which
IO_WQ_BIT_EXIT doesn't prevent for bounded work. If that parks the request
nothing is completed or freed, and nobody wakes up the task. If it is the
process that exits it can't be killed any more either.
NOP, IOSQE_ASYNC | IOSQE_IO_LINK
FUTEX_WAIT, FUTEX2_PRIVATE
exit of the thread, or of the process, up to 63us later
With four of these per round 5 to 8 of 10,000 rounds hang (4 CPUs, KVM):
io_uring_cancel_generic
do_exit
Commit f8b632e89a10 ("io_uring: tighten task exit cancellations") is about
the same gap, and makes the task look again for whatever happens before
io_free_req().
Free the request once the link is the current work of the worker, or
pending. Whoever is woken up by that can find the link, until it is parked
where cancellations look as well. To do so split io_wq_free_work() in two. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: don't flood a cancelling task with task_work
io_ring_exit_work() asks each task which has used the ring to remove its
tctx node, by task_work, and repeats that until the list is empty.
io_tctx_exit_cb() doesn't touch the node while the task is in
io_uring_cancel_generic(), which removes all the nodes at its end. So the
work item queues the callback again as soon as it has completed, for
nothing.
That is more than a waste of time. task_work_run() only returns when it
finds the list empty. If the rings are released from inside the
cancellation, because requests of other rings held the last references to
their files, up to 64 work items keep sending callbacks to the one task
which is running them. It never finds the list empty, never gets back to
the cancellation, the nodes stay, and so it goes on: a task with 60 pairs
of rings which poll each other ran 280000 callbacks in 5 seconds, 20
seconds after exit_group(). It ends when all the senders happen to be late
at the same time. Until then the task keeps a CPU and the work items busy.
An exiting task can't be killed meanwhile. execve() cancels the requests in
the same way, so a live task can get stuck there as well, for minutes. If
it takes more than five, the work items run into the
WARN_ON_ONCE(time_after(jiffies, timeout)) of io_ring_exit_work(). No
privilege is needed for any of this.
If the callback has met a task in cancellation, wait a little before it is
sent again. Nobody has to wake the work item up for that: either the node
is gone by then, or it is the turn of the next round. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/cancel: rearm local work wake up before sleep
io_uring_try_cancel_requests() sets ->cq_wait_nr to 1 so that the next
io_req_local_work_add() wakes the cancelling task. The add that takes the
count to zero is the only one that wakes, later ones see a count <= 0 and
return. io_uring_cancel_generic() however only becomes
TASK_INTERRUPTIBLE much later, so the one wake up can be spent on a
running task. That is fine as long as the entry of that add is still
queued, as the io_local_work_pending() check then skips the sleep. It is
not if the add was delayed after queueing its entry:
CPU0 (submitter in exec or exit) CPU1 (io_req_local_work_add)
mpscq_push(req A)
io_uring_try_cancel_requests()
io_run_local_work() // runs req A
io_uring_try_cancel_requests()
atomic_set(&ctx->cq_wait_nr, 1)
atomic_read(&ctx->cq_wait_nr) == 1
count taken, wake_up_state()
// task is running, no-op
prepare_to_wait(TASK_INTERRUPTIBLE)
io_local_work_pending() == false
schedule()
mpscq_push(req B)
cq_wait_nr <= 0, return
Only the sleeping task can run req B, so it is stuck in execve() until a
signal happens to wake it. An exiting task doesn't even get that.
Arm the count again once the task state is set and before the work list
is checked, for the rings whose local work this task is the one to run. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: refuse __l2cap_chan_add if chan already has conn
l2cap_chan may be linked to l2cap_conn at most once. This is assumed in
several places, eg l2cap_chan_del cleanup.
There is a TOCTOU race where the invariant is violated:
[Task 1] [Task 2]
l2cap_chan_connect l2cap_sock_bind
l2cap_chan_lock lock_sock
l2cap_state_change if (sk->sk_state != BT_OPEN)
chan->state = BT_CONNECT
l2cap_sock_state_change_cb chan->state = BT_BOUND
sk->sk_state = BT_BOUND
lock_sock <------------------ release_sock
sk->sk_state = BT_CONNECT
l2cap_sock_connect() does not check sk->sk_state, so since chan->state
is now BT_BOUND, subsequent connect() ends up with second
__l2cap_chan_add.
Explicitly document and check the invariant in __l2cap_chan_add with
WARN_ON_ONCE. The only callsite where it could be hit is
l2cap_chan_connect, so add pre-check there to avoid relying on
chan->state. chan->state read/write is not properly guarded currently so
there can be other TOCTOUC problems.
Add l2cap_lock_chan in l2cap_sock_bind() to guard chan->state write. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Hold trace_types_lock when resetting last boot data from readers
update_last_data_if_empty() is called from tracing_open() with O_TRUNC,
tracing_read_pipe() and tracing_buffers_read() without trace_types_lock.
Two readers can both pass the LAST_BOOT test and free module_delta
twice, and a module notifier can update module_delta while it is being
freed.
Take trace_types_lock in those paths and keep the callers that already
hold it on an unlocked variant. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Save the event file instead of the compatible histogram
create_field_var_hist() creates a histogram on the matched event to
supply a field variable, and records it on the target so it can be torn
down later:
hist_data = find_compatible_hist(target_hist_data, file);
...
/* Save the compatible histogram information */
var_hist->hist_data = hist_data;
hist_data is not the histogram it creates. It is one that was already
there, whose keys the new one copies. The saved pointer has a single
user, unregister_field_var_hists(), which runs when the target is
removed:
file = hist_data->field_var_hists[i]->hist_data->event_file;
find_compatible_hist() matches on keys alone, so it can pick one with no
variables of its own. check_var_refs() then returns false and the user
can remove it while the target still points at it:
BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320
Read of size 8 at addr ffff8880093b90e0 by task init/1
Freed by task 1:
kfree+0x154/0x420
event_hist_trigger_free+0x1d5/0x320
event_hist_trigger_parse+0x35f3/0x69e0
trigger_process_regex+0x1a6/0x250
Save the event file instead. It is all the dereference ever wanted, and
it does not go away when the user removes a trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Verify event_call identity when updating synth_event refcount
In event_hist_trigger_parse() and hist_unreg_all(), the histogram
registration and unregistration paths look up find_synth_event() using
trace_event_name(file->event_call) and adjust se->ref if a match is
found.
Because find_synth_event() only compares the event basename, registering
or removing a histogram on a non-synthetic trace event whose basename
matches a synthetic event erroneously modifies the synthetic event's
reference count. If a histogram is registered on the non-synthetic
event before the synthetic event is created and removed afterwards,
se->ref is decremented without a matching increment, allowing the
synthetic event to be freed while an active histogram action still holds
a pointer to it.
Introduce find_synth_event_call() to verify that &se->call matches
file->event_call before adjusting se->ref. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: own the request before clearing ->head
io_waitid_remove_wq() only takes the wait queue lock if ->head is set.
io_waitid_wait() clears ->head first thing, before it tries to become the
owner of the request by bumping ->refs. If somebody else owns the request
at that point, nothing keeps it from completing the request while the
wake up handler is still going to touch it:
CPU0 (io_waitid_wait) CPU1 (io_waitid, holds a ref)
list_del_init(&wait->entry)
smp_store_release(&iw->head, NULL)
__do_wait() finds another child
io_waitid_remove_wq()
// ->head == NULL, no locking
io_waitid_finish(), IOU_COMPLETE
// request freed and reused
atomic_fetch_inc(&iw->refs)
The same goes for __io_waitid_cancel() if it claims the request in that
window. ->refs is part of the per opcode data of the request, so this
increments whatever the next user of the request keeps there. If that
happens to be zero, the handler concludes that it owns the request, and
queues io_waitid_cb() for it. With the window held open by a delay, and
the request reused for a receive that is waiting for data:
BUG: KASAN: slab-use-after-free in __wake_up_common+0x1ca/0x1f0
__wake_up_sync_key+0x36/0x50
sock_def_readable+0xf1/0x420
unix_stream_sendmsg+0x60b/0x1110
Allocated by task 87:
io_arm_apoll+0x1ed/0x940
Freed by task 87:
__io_submit_flush_completions+0x118d/0x1a10
tctx_task_work_run+0x327/0x950
Only clear ->head once the handler owns the request. If it doesn't, the
owner finds ->head set and has to wait for the lock, which is held by the
caller of the handler. Deleting the already deleted entry again is
harmless. |
| A vulnerability classified as critical has been found in Cardo Systems Scala Rider Q3. Affected is the file /cardo/api of the Cardo-Updater. Unauthenticated remote code execution with root permissions is possible. Firewalling or disabling the service is recommended. |
| A vulnerability was determined in mathurvishal CloudClassroom-PHP-Project. The affected element is the function session_regenerate_id of the file loginlinkadmin.php. Executing a manipulation of the argument PHPSESSID can lead to session fixiation. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The vendor was contacted early about this disclosure but did not respond in any way. |
| An integer truncation vulnerability in the NAS decoder of OpenAirInterface (OAI) CN5G AMF v2.2.1 allows an unauthenticated remote attacker to cause a denial of service (DoS) via crafted NAS Registration Requests containing a malformed IMEISV in the 5GS Mobile Identity IE. The Type6NasIe::Validate() function truncates a 32-bit length value to 16 bits, bypassing length validation and causing an out-of-bounds heap read in DecodeImeisv(), which can crash the AMF process. |
