| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: Fix OOB write in wacom_hid_set_device_mode()
wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE
usage is always located in the first field (field[0]) of the feature report.
However, a device can specify HID_DG_INPUTMODE in a different field.
If HID_DG_INPUTMODE is in a field other than the first one and the first
field has a report_count smaller than the usage_index of HID_DG_INPUTMODE,
this leads to an out-of-bounds write to r->field[0]->value.
Fix this by storing the field index of HID_DG_INPUTMODE in 'struct
hid_data' during feature mapping. In wacom_hid_set_device_mode(), use
this stored field index to access the correct field and add bounds
checks to ensure both the field index and the value index are within
valid ranges before writing. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6: vti: Use ip6_tnl.net in vti6_changelink().
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab34948 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts. |
| DataCap through 2025.1.1 contains a missing authorization vulnerability that allows any authenticated user to escalate privileges by calling administrative role and menu management APIs. Attackers, including self-registered accounts, can send PUT requests to /api/v1/user/allocationRole to assign themselves the administrator role and gain full control of the instance. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer
The tagged FIFO path declares iio_buff on the stack with __aligned(8)
but no initializer, but there is a hole in the structure, which will
then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be
copied, but the space between that and the timestamp are not
initialized.
Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak
issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan,
but for the tagged path it only added the alignment qualifier and not
the initializer :(
Fix this by just zero-initializing the structure on the stack. |
| A flaw was found in dracut. The die() error-handling function writes its message into a shell script under the initramfs emergency-hook directory without properly shell-quoting it. When the message contains data derived from the DHCP ROOT_PATH option, an attacker on the adjacent network who controls a rogue DHCP server can inject a command-substitution sequence that executes as root the next time dracut sources its emergency hook scripts during standard boot-failure handling. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in fib6_select_path()
Found while auditing the same pattern Sashiko reported in
rt6_fill_node() [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)
without waiting for RCU readers; first->fib6_siblings.next then
still points into the old ring and this softirq-side walker never
reaches &first->fib6_siblings as its terminator. fib6_purge_rt()
always WRITE_ONCE()s first->fib6_nsiblings to 0 before
list_del_rcu(), so an inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, node-forge parsed deprecated extension OIDs 2.5.29.10 and 2.5.29.13 as basicConstraints, and pki.verifyCertificateChain() used the first extension with that name. Exploitation requires a CA trusted by the application to issue a certificate carrying an attacker-supplied deprecated-OID extension, commonly because the CA copies extensions from a certificate signing request. By placing a permissive deprecated extension before the genuine 2.5.29.19 basicConstraints extension, the certificate holder could have the certificate accepted as a CA and issue certificates for arbitrary names, enabling server or client impersonation. If the issuing CA adds a keyUsage extension without keyCertSign, node-forge rejects the chain. This issue is fixed in version 1.4.1. |
| Kubeflow Pipelines enables users to build and deploy portable, scalable machine learning workflows. Prior to 2.18.0, the API server decompressed uploaded pipeline archives without adequately bounding expanded data while locating or reading the pipeline file. A small ZIP or gzip-compressed tar archive can consume disproportionately large memory and exhaust API-server resources. Multipart pipeline and pipeline-version upload processing performs decompression before namespace authorization, so a reachable caller does not need a successful pipeline-create authorization decision. URL-import handlers authorize before fetching and decompressing a remote archive. The amount of expansion required to interrupt service depends on deployment resource limits and concurrent activity, and no specific archive is guaranteed to crash every deployment. This issue is fixed in version 2.18.0. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used pem.decode(), lib/pem.js, missing END line to process the relevant input or security decision. node-forge used polynomial-time regular expressions in pem.decode(), including when searching for a matching END line and parsing encapsulated headers. An unauthenticated attacker able to supply PEM input to any high-level parser could consume excessive CPU with a long malformed message and cause denial of service. This issue is fixed in version 1.4.1. |
| PHPUnit is a testing framework for PHP. From 13.4.0 until 13.4.4, the TestCase::coverageFilesDirectory() logic in src/Runner/Phpt/TestCase.php creates temporary files for PHPT code coverage in a predictable phpunit-phpt directory under sys_get_temp_dir() and reuses that directory without verifying its ownership or permissions. On multi-user systems with a shared temporary path, a local attacker who creates the directory before the developer runs PHPT tests with code coverage can replace the generated job file before the child process executes it with require, allowing arbitrary code execution with the developer's privileges while the test and coverage report appear successful. PHPUnit 12.5 and earlier, default macOS and Windows configurations with per-user temporary directories, and single-user environments where another user cannot create files in the temporary path are not affected. This issue is fixed in 13.4.4. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used forge.tls.createConnection(), fragmented handshake message, interleaved record to process the relevant input or security decision. node-forge continued processing after a TLS record of another content type interrupted a fragmented handshake message. A remote peer could trigger an uncaught TypeError in process(), causing the connection or hosting process to fail. This issue is fixed in version 1.4.1. |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.5, binary REAL decoding builds a large mantissa one octet at a time by shifting a growing integer and slicing the remaining byte string. Attacker-controlled ASN.1 includes a binary-encoded REAL with a large mantissa and reaches BER, CER, or DER decode(), with or without a schema containing REAL. RealPayloadDecoder.valueDecoder repeatedly performs a left shift, OR, and suffix copy for every mantissa octet, making decode time quadratic in mantissa length. A comparatively small REAL value can hold a decoding worker on one CPU core for seconds or longer and cause availability loss. This issue is fixed in version 0.6.5. |
| libcurl could accidentally return a URL for `curl_easy_getinfo()`'s
`CURLINFO_EFFECTIVE_URL` option containing credentials, even though neither
the URL provided to libcurl nor the redirected URL did. |
| A deeply nested multipart MIME structure constructed via the public API causes
a stack overflow in libcurl during normal cleanup operations. An excessive
recursion depth within `curl_mime_free` leads to unbounded stack frame
allocation during structure traversal, ultimately crashing the host process. |
| When invoked with `--remote-header-name` (`-J`), curl fails to preserve its
documented anti-clobbering protection if an intermediate 103 Early Hints
response precedes the final HTTP response, or if an `ETag` header is processed
before `Content-Disposition` under `--etag-save`. This flaw allows an HTTP(S)
server to overwrite an existing local file specified in the
`Content-Disposition` header despite the presence of the `-J` non-overwrite
constraint. |
| A flaw was found in openshift-ansible. The installer container's `run` script downloads and executes remote inventory and dynamic scripts without integrity verification. A remote attacker, by performing a Man-in-the-Middle (MITM) attack or compromising the HTTP server providing these scripts, could substitute an arbitrary executable. This malicious executable would then run with the installer's user ID (UID) and full cluster-provisioning privileges, leading to arbitrary code execution. |
| An out-of-bounds read vulnerability exists in the streaming RPC client of Apache bRPC (versions 1.11.0 through 1.17.0) on all platforms. A client that creates multiple streams in a single RPC expects the server response to carry exactly one extra_stream_id for every additional stream. The response handling path indexed the returned identifiers using the locally created stream count without first validating the size of the returned list, so a malicious or compromised server (or an on-path attacker) can trigger an out-of-bounds read in the client by returning a malformed StreamSettings response with fewer extra_stream_ids than expected. This may crash the client process (denial of service) or leak unintended memory contents into subsequent stream handling; surplus identifiers have no valid client-stream mapping and are processed inconsistently.
Root Cause:
Since bRPC 1.11.0, a client can create multiple streams in one RPC via batch StreamCreate. The expected behavior is that the server response must return exactly (N-1) extra_stream_ids, where N is the number of locally created streams. In Controller::HandleStreamConnection, the response path reads extra_stream_ids[i-1] for each additional local stream without first comparing the returned list size with (N-1). If the server returns fewer identifiers, the read runs past the end of the returned list (out-of-bounds read); if it returns more, the surplus identifiers have no corresponding client-side stream.
Affected Scenarios:
A bRPC client using multi-stream RPC (creating more than one stream in a single RPC) that connects to an untrusted, malicious, or compromised server or to a server reached through an untrusted network path. The server sends a malformed StreamSettings response to trigger the issue.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3485
Note:
The fix makes the client reject responses whose extra_stream_ids count does not exactly match the number of additional client streams. Such mismatched responses now fail the RPC with ERESPONSE and go through the existing stream cleanup path, instead of being partially processed. |
| Resource exhaustion in Apache bRPC (version < 1.18.0) on all platforms: multiple parsers that accept wire-controlled input bound no limit on the sizes declared by the client or on decompressed output, which attackers can use to drive disproportionate memory use and crash the process.
Root Cause:
1) The gzip/zlib/snappy decompressors enforce no output limit: -max_body_size is checked against the compressed bytes only, so a cap-compliant body (e.g. 64 MiB) can decompress to tens of GiB.
2) The AMF string readers allocate the declared length before the bytes are actually available.
3) RTMP chunk headers may re-declare a message length mid-stream; the declared length was never bounded and the partial reassembly buffer kept growing.
4) The sofa-pbrpc parser does not bound meta_size.
5) mcpack2pb trusts wire-declared item counts for Reserve() and a string value_size of 0 underflows the buffer size, aborting the process.
Affected Scenarios:
Any bRPC service accepting gzip/zlib/snappy-compressed bodies or rtmp, sofa-pbrpc, or mcpack2pb messages from untrusted clients.
How to Fix:(Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3476
Note:
After the fix, requests whose decompressed size, RTMP message length, or mcpack declared count exceed the new limits are rejected. Operators who legitimately need larger values can raise the corresponding flag (-max_decompressed_body_size, max_body_size). |
| Uncontrolled resource consumption in the HTTP/2 (h2) receive path of Apache bRPC (version < 1.18.0) on all platforms allows a remote unauthenticated attacker to crash the server or grow its memory without bound by sending crafted HTTP/2 frames.
Root Cause:
The h2 parser, enabled by default on every bRPC server port and used by h2/gRPC clients, trusts the peer to respect receive-side limits that bRPC advertises but never enforces:
1. SETTINGS_MAX_CONCURRENT_STREAMS defaulted to unlimited and was never checked on the server, letting a peer pin an unbounded number of pending streams per connection (~100x memory amplification).
2. SETTINGS_MAX_HEADER_LIST_SIZE defaulted to unlimited and was never enforced; 1-byte HPACK indexed references amplify a small HEADERS frame ~4000x into an unbounded decoded header list ("HPACK bomb"), and a never-completed HEADERS/CONTINUATION block accumulates memory without limit.
3. Control-frame acks (PING/SETTINGS acks, RST_STREAM, GOAWAY, WINDOW_UPDATE) unconditionally bypassed the -socket_max_unwritten_bytes write cap, so a PING flood combined with withheld TCP reads grew the connection buffer without the documented bound.
4. The HPACK dynamic table size update was validated against the protocol default (4096) instead of the advertised SETTINGS_HEADER_TABLE_SIZE, which together with the dynamic-table queue/accounting issue can desynchronize the decoder and dereference NULL (crash).
Affected scenarios:
Any bRPC server serving HTTP/h2/gRPC to an untrusted network, and any bRPC h2/gRPC client connecting to an untrusted backend. The h2 parser runs before any Authenticator check on the shared port.
How to fix:
Upgrade bRPC, or apply the patch in https://github.com/apache/brpc/pull/3474.
Note:
After applying the fix the following limits are enforced by default:
- max_concurrent_streams: 1024 per connection (4294967295 restores unlimited).
- max_header_list_size: 1 MiB decoded size per stream (4294967295 restores unlimited; -h2_client_max_header_list_size for clients).
- h2 control-frame acks respect -socket_max_unwritten_bytes (-h2_ack_ignore_eovercrowded restores the old behavior).
Requests exceeding these limits are rejected (RST_STREAM(REFUSED_STREAM) or a connection error). |
| A reachable-assertion flaw in the HPACK header-compression decoder of the HTTP/2 (h2/gRPC) stack in Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a crafted sequence of HPACK headers, resulting in a denial of service.
Root Cause:
In src/brpc/details/hpack.cpp, IndexTable::Init sizes the dynamic-table ring buffer as num_headers = max_size / (32 + 2), i.e. it assumes a minimum table entry of 34 bytes (name >= 1 byte + value >= 1 byte + 32 bytes of overhead). However, RFC 7541 section 4.1 specifies that the minimum entry size is 33 bytes, because the value may be empty (name >= 1 byte + value == 0 + 32 bytes). For the default 4096-byte table this allocates only 120 slots (4096/34). Eviction in AddHeader is driven by byte usage (_max_size), not by slot count, so a peer can add 121 minimal 33-byte entries (121*33 = 3993 <= 4096) without triggering eviction. The 121st AddHeader then hits CHECK(!_header_queue.full()), which aborts the process.
Affected Scenarios:
Use a bRPC server that serves HTTP/2 or gRPC requests (e.g. via the h2 protocol) from an untrusted network. The malicious header block is processed during HPACK decoding of incoming requests without authentication.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3462
Note:
The fix sizes the dynamic table for the 33-byte minimum entry (max_size / (32 + 1)) and ensures at least one ring-buffer slot is kept when max_size is smaller than the minimum entry, so that initialization cannot fail on malloc(0). |
