| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| MOOS essential-moos pAntler through 10.0.1 contains a remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary programs by publishing a crafted MISSION_FILE message to the MOOSDB. Attackers can publish a mission file containing malicious Run entries that pAntler parses and executes via execvp() without authentication validation. |
| MOOS core-moos through 10.4.0 contains an authentication bypass vulnerability in the optional MOOSDB HTTP server that allows unauthenticated clients to write variables. Attackers can send HTTP requests with variable names and values to the MOOSDB HTTP server port to modify MOOS variables including actuator and override commands without authentication. |
| MOOS essential-moos pShare through 10.0.1 fails to properly authorize PSHARE_CMD messages, allowing any publisher to reconfigure network routes and listeners at runtime. Attackers can send crafted PSHARE_CMD messages with cmd=output or cmd=input parameters to open new listeners on arbitrary addresses and redirect or duplicate bus traffic to attacker-controlled destinations. |
| A vulnerability was found in TRENDnet TEW-432BRP 3.10B20. Affected by this vulnerability is the function formTcpipSetup of the file /goform/formTcpipSetup. Performing a manipulation of the argument Name results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor confirms: "As this router was EOL'd in 2011, we have no way of testing if such vulnerability exists. We will notify our customers of a potential vulnerability on this product." This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was detected in Wavlink WL-WN530BE1-A 251117. This vulnerability affects the function strcpy of the file /cgi-bin/ExportAllSettings.cgi of the component Settings Export CGI. Performing a manipulation of the argument HTTP_COOKIE/X-Cmd results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure. |
| A flaw has been found in D-Link DCS-930L B1.08B4. This impacts the function mpfd_decode of the file bootloader_region.bin of the component Emergency HTTP Recovery Server. Executing a manipulation of the argument firmware can lead to improper verification of cryptographic signature. The attack may be performed from remote. The exploit has been published and may be used. |
| A flaw has been found in OpenSpug Spug up to 3.4.0/4.0.1. This impacts an unknown function of the file /exec/transfer of the component File Transfer. Executing a manipulation can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Privasys rustls is a maintained fork of the rustls TLS library that adds RA-TLS challenge and channel-binding support. Prior to privasys-v0.8.1, the fork emitted RA-TLS challenge certificates whose quote ReportData was bound to the certificate public key and client nonce but not to the active TLS session. An attacker who obtained an enclave TLS private key could relay a genuine quote onto another connection, causing a relying party to accept an attacker-terminated connection as the attested enclave. This issue is fixed in privasys-v0.8.1. |
| x64dbg-MCP Server is a native Model Context Protocol (MCP) plugin for x64dbg that exposes the debugger's full functionality over HTTP. Prior to 1.1, x64dbg-MCP Server exposes all MCP debugger tools over HTTP and SSE without authentication while listening on 0.0.0.0 by default. Any unauthenticated network client that can reach the default port, 9094 for x64 or 9095 for x32, can execute arbitrary x64dbg commands, attach to processes by PID, read and write debuggee memory, and write files to arbitrary paths. This issue is fixed in version 1.1. |
| ppt2png through 0.0.6 contains an OS command injection vulnerability that allows attackers to execute operating system commands by supplying unsanitized input or output path arguments. Attackers can append shell metacharacters such as ';' to file names passed to child_process.exec() in ppt2png.js, running commands with Node.js process privileges. |
| TVU Networks Receiver/Transceiver devices running firmware before version 7.9 contain an authentication bypass vulnerability in the web management login endpoint POST /tvu/Login that allows remote unauthenticated attackers to obtain an administrative session by submitting an empty or absent UserName parameter. Attackers can send a crafted HTTP request directly, bypassing client-side JavaScript validation, to receive a valid session cookie regardless of the password value and gain full administrative control of the device's web management interface. |
| Qexo is an open source online editor for static blogs. From 4.0.0 until 4.2.0, Qexo exposes /api/init_step/ through init_step_api without authentication, authorization, or a setup-completion guard. An unauthenticated requester with a valid CSRF token obtained from a public page can submit the first initialization step and reset the INIT setting, causing the instance to re-enter the setup flow. The setup response and /init/ page can expose stored PROVIDER configuration, including service credentials, in frontend content. This issue is fixed in version 4.2.0. |
| Remote Attestation TLS Clients provides multi-language utilities for verifying attested TLS connections. Prior to 0.5.0, the Rust and Go RA-TLS challenge verifiers accepted quote ReportData that was bound to the certificate public key and client nonce but not to the active TLS session before permitting application traffic. An attacker who obtained an enclave TLS private key could relay a genuine quote onto another connection, causing the clients to accept an attacker-terminated connection as the attested enclave. This issue is fixed in 0.5.0. |
| A vulnerability was identified in Linksys E1700 up to 1.0.0.4.003. This issue affects the function setVlan of the file /goform/setVlan. Such manipulation of the argument vlan_set leads to stack-based buffer overflow. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| openapi-typescript-codegen through 0.31.0 contains a code injection vulnerability that allows attackers controlling an OpenAPI document to inject JavaScript by supplying unescaped values interpolated into single-quoted string literals. Attackers can embed a single quote in path keys, parameter names, servers[0].url, or info.version to execute arbitrary JavaScript when generated clients are imported or service methods called. |
| A double free and use-after-free vulnerability in the RdbLoadDeletedNodes function of the RDB graph decoders (src/serializers/decoders/*/decode_graph_entities.c) in FalkorDB before 4.18.1 allows a remote attacker who can issue Redis replication commands (for example, against an instance with no password configured) to cause a denial of service or execute arbitrary code in the redis-server process by supplying a crafted RDB stream whose deleted-nodes buffer length is not a multiple of sizeof(NodeID). The length check relies on ASSERT(), which is compiled out in release builds, so the function continues after freeing the buffer, reading it and freeing it a second time. |
| easy-pdf-merge 0.1.0 through 0.2.6 contains an OS command injection vulnerability that allows attackers to execute commands by injecting shell metacharacters into source paths, destination path, or maxHeap option. Attackers can supply file names or options containing double quotes, semicolons, $() or backticks, which child_process.exec() runs through a shell with the Node.js process privileges. |
| Metabase is an open source business intelligence and analytics platform. From 1.55.0 until 1.58.16, 1.59.13, 1.60.9, and 1.61.4, native queries and actions against an H2 data source are passed through without restricting host-facing built-in functions. A user authorized to run native queries or actions can invoke FILE_READ, FILE_WRITE, CSVREAD, CSVWRITE, or LINK_SCHEMA to read or write arbitrary files on the Metabase server or link other databases. The default sample database uses H2, so the vulnerable surface is exposed by default. This issue is fixed in versions 1.58.16, 1.59.13, 1.60.9, and 1.61.4. |
| The OpenText™ (EnCase SAFE Agents) component utilized by OpenText™ Endpoint Investigator, OpenText™ Endpoint Forensics & Response, OpenText™ Information Assurance, and OpenText™ Endpoint Security contains a security vulnerability on the Agents that could allow unauthorized or unauthenticated activity that establishes an unauthorized connection to a vulnerable Agent by bypassing intended security controls during session establishment |
| wolfSSH does not validate that the ECDSA curve identifier in a KEXDH_REPLY host key blob matches the algorithm negotiated during key exchange. In ParseECCPubKey() (src/internal.c), the blob's algorithm string is used to derive the curve via NameToId/wcPrimeForId without checking against the negotiated ssh->handshake->pubKeyId, and the RFC 5656 curve identifier string is discarded via GetSkip() rather than compared. An active network man-in-the-middle attacker can substitute a host key blob containing a different ECDSA curve, causing the client to import the key on the wrong curve. Because the attacker controls the private key for the substituted curve, signature verification passes. Exploitation requires an active MitM position and a lax public key check callback (e.g., TOFU, algorithm-name-only check, or fingerprint match against the parsed key). |
