| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Multiple Improper Input Validation vulnerabilities in UniFi Connect EV Station Lite may allow a Command Injection by a malicious actor with network access to the UniFi Connect EV Station Lite.
Affected Products:
UniFi Connect EV Station Lite (Version 1.5.1 and earlier)
Mitigation:
Update UniFi Connect EV Station Lite to Version 1.5.2 or later |
| A vulnerability has been found in Oiwtech OIW-2431APGN-HP 2.5.3-B20131128 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formScript of the component Personal Script Submenu. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| quic-go is an implementation of the QUIC protocol in Go. Prior to version 0.42.0, an attacker can cause its peer to run out of memory sending a large number of `NEW_CONNECTION_ID` frames that retire old connection IDs. The receiver is supposed to respond to each retirement frame with a `RETIRE_CONNECTION_ID` frame. The attacker can prevent the receiver from sending out (the vast majority of) these `RETIRE_CONNECTION_ID` frames by collapsing the peers congestion window (by selectively acknowledging received packets) and by manipulating the peer's RTT estimate. Version 0.42.0 contains a patch for the issue. No known workarounds are available. |
| Password Pusher, an open source application to communicate sensitive information over the web, comes with a configurable rate limiter. In versions prior to v1.49.0, the rate limiter could be bypassed by forging proxy headers allowing bad actors to send unlimited traffic to the site potentially causing a denial of service. In v1.49.0, a fix was implemented to only authorize proxies on local IPs which resolves this issue. As a workaround, one may add rules to one's proxy and/or firewall to not accept external proxy headers such as `X-Forwarded-*` from clients. |
| Application does not limit the number or frequency of user interactions, such as the number of incoming requests. At the "/EPMUI/VfManager.asmx/ChangePassword" endpoint it is possible to perform a brute force attack on the current password in use.
This issue affects CyberArk Endpoint Privilege Manager in SaaS version 24.7.1. The status of other versions is unknown. After multiple attempts to contact the vendor we did not receive any answer. |
| An attacker with access to a minion key can exploit the 'on demand' pillar functionality with a specially crafted git url which could cause and arbitrary command to be run on the master with the same privileges as the master process. |
| A JNDI injection issue was discovered in Cloudera JDBC Connector for Hive before 2.6.26 and JDBC Connector for Impala before 2.6.35. Attackers can inject malicious parameters into the JDBC URL, triggering JNDI injection during the process when the JDBC Driver uses this URL to connect to the database. This could lead to remote code execution. JNDI injection is possible via the JDBC connection property krbJAASFile for the Java Authentication and Authorization Service (JAAS). Using untrusted parameters in the krbJAASFile and/or remote host can trigger JNDI injection in the JDBC URL through the krbJAASFile. |
| Expr is an expression language and expression evaluation for Go. Prior to version 1.17.0, if the Expr expression parser is given an unbounded input string, it will attempt to compile the entire string and generate an Abstract Syntax Tree (AST) node for each part of the expression. In scenarios where input size isn’t limited, a malicious or inadvertent extremely large expression can consume excessive memory as the parser builds a huge AST. This can ultimately lead to*excessive memory usage and an Out-Of-Memory (OOM) crash of the process. This issue is relatively uncommon and will only manifest when there are no restrictions on the input size, i.e. the expression length is allowed to grow arbitrarily large. In typical use cases where inputs are bounded or validated, this problem would not occur. The problem has been patched in the latest versions of the Expr library. The fix introduces compile-time limits on the number of AST nodes and memory usage during parsing, preventing any single expression from exhausting resources. Users should upgrade to Expr version 1.17.0 or later, as this release includes the new node budget and memory limit safeguards. Upgrading to v1.17.0 ensures that extremely deep or large expressions are detected and safely aborted during compilation, avoiding the OOM condition. For users who cannot immediately upgrade, the recommended workaround is to impose an input size restriction before parsing. In practice, this means validating or limiting the length of expression strings that your application will accept. For example, set a maximum allowable number of characters (or nodes) for any expression and reject or truncate inputs that exceed this limit. By ensuring no unbounded-length expression is ever fed into the parser, one can prevent the parser from constructing a pathologically large AST and avoid potential memory exhaustion. In short, pre-validate and cap input size as a safeguard in the absence of the patch. |
| Multiple bash files were present in the application's private directory.
Bash files can be used on their own, by an attacker that has already
full access to the mobile platform to compromise the translations for
the application. |
| In Matter (aka connectedhomeip or Project CHIP) through 1.4.0.0 before e3277eb, unlimited user label appends in a userlabel cluster can lead to a denial of service (resource exhaustion). |
| A vulnerability has been found in BDCOM Behavior Management and Auditing System up to 20250210 and classified as critical. Affected by this vulnerability is the function log_operate_clear of the file /webui/modules/log/operate.mds. The manipulation of the argument start_code leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| AuntyFey Smart Combination Lock firmware versions as of 2025-12-24 contain a vulnerability that allows an unauthenticated attacker within Bluetooth Low Energy (BLE) range to cause a denial of service by repeatedly initiating BLE connections. Sustained connection attempts interrupt keypad authentication input and repeatedly force the device into lockout states, preventing legitimate users from unlocking the device. |
| A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component. |
| A vulnerability was found in Raisecom Multi-Service Intelligent Gateway up to 20250208. It has been declared as critical. This vulnerability affects unknown code of the file /vpn/vpn_template_style.php of the component Request Parameter Handler. The manipulation of the argument stylenum leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| When parsing a multipart form (either explicitly with Request.ParseMultipartForm or implicitly with Request.FormValue, Request.PostFormValue, or Request.FormFile), limits on the total size of the parsed form were not applied to the memory consumed while reading a single form line. This permits a maliciously crafted input containing very long lines to cause allocation of arbitrarily large amounts of memory, potentially leading to memory exhaustion. With fix, the ParseMultipartForm function now correctly limits the maximum size of form lines. |
| An unintended entry point vulnerability has been identified in certain router models, which may allow for arbitrary command execution.
Refer to the ' 01/02/2025 ASUS Router AiCloud vulnerability' section on the ASUS Security Advisory for more information. |
| A vulnerability has been identified within Rancher Manager in which it
did not enforce request body size limits on certain public
(unauthenticated) and authenticated API endpoints. This allows a
malicious user to exploit this by sending excessively large payloads,
which are fully loaded into memory during processing, leading to Denial of Service (DoS). |
| A flaw was found in kubevirt. A user within a virtual machine (VM), if the guest agent is active, can exploit this by causing the agent to report an excessive number of network interfaces. This action can overwhelm the system's ability to store VM configuration updates, effectively blocking changes to the Virtual Machine Instance (VMI). This allows the VM user to restrict the VM administrator's ability to manage the VM, leading to a denial of service for administrative operations. |
| A weakness has been identified in EFM ipTIME A3004T 14.19.0. This vulnerability affects the function show_debug_screen of the file /sess-bin/timepro.cgi of the component Administrator Password Handler. This manipulation of the argument aaksjdkfj with the input !@dnjsrureljrm*& causes command injection. The attack is possible to be carried out remotely. The complexity of an attack is rather high. It is stated that the exploitability is difficult. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Synway SMG Gateway Management Software up to 20250204. It has been rated as critical. This issue affects some unknown processing of the file 9-12ping.php. The manipulation of the argument retry leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
