| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: account only unread bytes in read_skb()
After a partial stream receive, rx_bytes tracks the unread suffix while
buf_used and peer credit still cover the whole packet.
virtio_transport_read_skb() dequeues that packet but passes pkt_len for
both counters, underflowing rx_bytes.
On a connected CID_LOCAL stream with an SK_SKB verdict, a 40-byte read
from a 100-byte packet made SIOCINQ report -40, an empty recv return
ELOOP, and poll report the empty socket readable. After verdict detach,
receiving 40 bytes wrapped the counter to zero and hid those queued bytes
until one more byte arrived. The fixed run kept the counter balanced
and exposed all queued data immediately.
This was found during an LLM-assisted manual source audit of VSOCK
receive accounting while re-evaluating virtio_transport_read_skb() after
CVE-2024-50169.
Subtract only skb->len minus the VSOCK offset from rx_bytes. Retain the
full packet length for buf_used and peer credit. |
| In the Linux kernel, the following vulnerability has been resolved:
dm ioctl: don't let data_start run past the buffer
struct dm_ioctl has seven bytes of trailing padding, so the smallest
buffer userspace is allowed to ask for, offsetof(struct dm_ioctl, data),
is seven bytes shorter than sizeof(struct dm_ioctl).
get_result_buffer() sets data_start to sizeof(struct dm_ioctl) without
looking at how big the buffer actually is. Ask for the minimum and
data_start ends up seven bytes past the end. Callers add it to
data_size, and ctl_ioctl() copies that much back to userspace:
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0xad/0xd0
Read of size 312 at addr ffff8880169e4c00 by task repro-dm/140
ctl_ioctl+0x5e3/0xcb0
dm_ctl_ioctl+0x25/0x40
allocated 305-byte region [ffff8880169e4c00, ffff8880169e4d31)
A DM_LIST_DEVICES with data_size set to 305 is enough to hit it, and the
seven bytes that leak are whatever sat next to the allocation.
Clamp data_start to the buffer size.
Note that this is not a security bug because the out-of-bounds read can
only be triggered by root. |
| An issue has been discovered in GitLab CE/EE affecting all versions from 7.0 before 18.11.13, 19.0 before 19.0.10, 19.1 before 19.1.9, 19.2 before 19.2.9, 19.3 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that, under certain conditions, could have allowed an unauthenticated user to execute arbitrary code on the GitLab server due to integer overflow when compiling a specially crafted regular expression. |
| Sandbox escape due to incorrect boundary conditions in the Networking component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, Thunderbird 153.5, and Firefox ESR 115.44. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Check PSC request indices against the actual size of the buffer
When processing Page State Change (PSC) requests, validate the PSC buffer
against the effective size of the scratch area, which could be less than
the maximum size if the guest provided a pointer that isn't exactly at the
start of the GHCB shared buffer. |
| PHP has various global state that temporarily points into request memory. In some scenarios, global state may not be correctly reset, or may be repopulated after being reset. The global state may then refer to request memory even after it has been freed. Subsequent requests may read or branch on this stale state before it is fully initialized. Multiple strategies can trigger this condition and produce remote code execution (RCE). |
| PHP uses longjmp() for out-of-memory (OOM) errors to exit the current context and abort handling of the request. Some contexts may not properly account for this scenario and leave request memory in an uninitialized state before performing an allocation. The subsequent request cleanup procedure may read or branch on this memory. Multiple OOM strategies can consistently trigger this condition and lead to remote code execution (RCE). |
| php_openssl_matches_wildcard_name() in ext/openssl/xp_ssl.c underflows the length argument passed to memchr() when a TLS server certificate presents a wildcard name whose literal characters are together longer than the hostname being verified. A malicious server presenting such a certificate makes the PHP client read up to SIZE_MAX bytes past the end of a heap allocation. The path is reachable from any default client stream, because verify_peer_name is enabled by default. |
| Vorota-ai nmap-mcp through commit 3636afa contains an improper allowlist validation vulnerability in the scan_vulnerabilities tool that lets callers run blocked NSE script categories. MCP clients or prompt-injected agents can pass categories like exploit, dos, brute, or intrusive to nmap --script, running intrusive, brute-force, exploit, or denial-of-service scripts against scan targets. |
| SDL_image through 3.4.8 and through 2.8.12 contains a stack out-of-bounds read vulnerability in IMG_LoadLBM_IO() in src/IMG_lbm.c that skips bitplane count validation when HAM mode is set. Attackers can supply a crafted ILBM file with more than 8 HAM bitplanes to read past the colormap stack array, causing crashes or disclosing stack memory. |
| In the Linux kernel, the following vulnerability has been resolved:
macsec: fix replay protection at XPN lower-PN wrap
In macsec_post_decrypt(), when pn is U32_MAX, pn + 1 overflows u32 to 0
and the first branch never fires. If next_pn_halves.lower is also in the
upper half, pn_same_half(pn, lower) is true and the XPN else-if does not
fire either, leaving next_pn_halves unchanged. An attacker that captures
the legitimate frame carrying pn == 0xFFFFFFFF on an XPN association
can then replay it indefinitely, since lowest_pn never rises above
the captured pn and macsec_decrypt() reconstructs the same IV.
Extend the XPN else-if to also fire when pn + 1 wraps to 0, so receipt
of pn == U32_MAX advances next_pn_halves to (upper + 1, 0). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: validate extension header length before copying to cmsg
ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR}
cmsgs (and their IPV6_2292* legacy counterparts) by trusting the
on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length.
The length was validated only at parse time (ipv6_parse_hopopts(),
etc.). An nftables payload-write expression can rewrite hdrlen after
parsing and before the skb reaches recvmsg; the write itself is
in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040
bytes from an 8-byte header. nftables is reachable from an
unprivileged user namespace, so this is an unprivileged
slab-out-of-bounds read:
BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540
put_cmsg+0x3ac/0x540
udpv6_recvmsg+0xca0/0x1250
sock_recvmsg+0xdf/0x190
____sys_recvmsg+0x1b1/0x620
Add ipv6_get_exthdr_len() which validates that at least two bytes
are accessible before reading the hdrlen field, then checks the
computed length against skb_tail_pointer(skb), returning 0 on
failure. Extension headers are kept in the linear skb area by
pskb_may_pull() during input, so skb_tail_pointer() is the correct
bound.
Use ipv6_get_exthdr_len() at all non-AH call sites: the five
standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR)
and the three standard cases in the extension-header walk loop
(DSTOPTS, ROUTING, default). AH retains an inline bounds check
because its length formula differs ((ptr[1]+2)<<2).
The walk loop also gets a pre-read bounds check at the top to
validate ptr before any case accesses ptr[0] or ptr[1].
When the walk loop detects a corrupted header, return from the
function instead of continuing to process later socket options. |
| Dell PowerProtect Data Domain, Feature Release versions 7.7.1.0 through LTS 2026, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain a Stack-based Buffer Overflow vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Denial of service. |
| Dell PowerProtect Data Domain, Feature Release versions 7.7.1.0 through 8.7, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain a Stack-based Buffer Overflow vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Denial of service. |
| An out-of-bounds write vulnerability in the Qt QTextCodec iconv-based encoding of the Qt 5 Compatibility APIs module (Qt Core in Qt 5 and earlier) impacts Qt. Under certain conditions, encoding text with QTextCodec may write outside an internal buffer. This can cause the application to crash and may affect data integrity. |
| A stack-based buffer overflow vulnerability exists in the web management interface of affected Moxa wireless device servers. An authenticated remote attacker with low privileges could exploit insufficient bounds checking of user-supplied input, causing the web management service to become unresponsive. Restoring the service requires power cycling the affected device, while other device functions remain operational. |
| In JetBrains Junie CLI before 26.8.17 command execution was possible due to incomplete validation of allowlisted commands |
| In affected versions of Octopus Server, OIDC token issuer validation was performed inconsistently. This could result in a token issued from a suitably configured non legitimate issuer being accepted as a token belonging to a service account from a legitimate trusted issuer. Exploitation requires a service account with at least one OIDC identity configured. An attacker would also need to know or guess some details of that identity in order to be in a position to attempt exploitation. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2. Processing a maliciously crafted image may lead to unexpected app termination. |
| libexpat before commit 13c5f63 contains a heap buffer over-read vulnerability in xmlparse.c. XML_ParseBuffer advances the parse buffer end with parser->m_bufferEnd += len using a caller-supplied length that is not validated against the allocated buffer size, so repeated XML_ParseBuffer calls move m_bufferEnd past the end of the heap allocation and subsequent parsing reads out of bounds. Reaching this path requires a parse buffer to already be present; otherwise XML_ParseBuffer returns XML_ERROR_NO_BUFFER. A buffer is present after a prior call to XML_GetBuffer, either directly (the common case) or indirectly through a prior XML_Parse call that allocates the buffer internally. The over-read discloses adjacent heap memory to the calling application, recovering heap pointers, libc function pointers, and code pointers sufficient to defeat ASLR and build further exploitation primitives. |
