| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/fb-helper: defer setup when fbdev_probe() fails, not just on -EAGAIN
__drm_fb_helper_initial_config_and_unlock() calls
drm_client_modeset_probe() first, which already fills in each
mode_set->mode/num_connectors for every connected output, and only
afterwards calls drm_fb_helper_single_fb_probe() to create
fb_helper->fb and wire it into those mode_sets via
drm_setup_crtcs_fb().
If drm_fb_helper_single_fb_probe() fails with anything other than
-EAGAIN (e.g. dev->driver->fbdev_probe() itself fails), the function
bails out before drm_setup_crtcs_fb() runs and before setting
fb_helper->deferred_setup. The client is left with mode_sets that
have a mode and connectors but mode_set->fb == NULL, and nothing
marks this fb_helper as needing a retry.
__drm_fb_helper_restore_fbdev_mode_unlocked() only skips committing
when fb_helper->deferred_setup is set, so a later .restore() call
(drm_lastclose() on process exit, in this report) commits the stale
mode_set through drm_client_modeset_commit() ->
drm_client_modeset_commit_atomic() -> __drm_atomic_helper_set_config(),
which hits WARN_ON(!set->fb).
Mark fb_helper->deferred_setup on any drm_fb_helper_single_fb_probe()
failure, not just -EAGAIN, so restore keeps skipping the commit until
a later hotplug event successfully re-probes and re-populates
mode_set->fb. The real error code is still returned to the caller
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Prevent overstepping exec array boundary
It is possible for eb_relocate_parse_slow() to call kvfree() on
entries outside the original exec array during following
scenario inside eb_relocate_parse_slow():
1) eb_copy_relocations() allocates as many as eb->buffer_count
copies for exec entries;
2) eb_parse() appends up to two VMAs, right after incrementing
eb->buffer_count;
3) cleanup under "out" label uses this incremented buffer_count
to release relocation pointers from exec array via kvfree(),
not from VMA array.
To amend this problem, ensure that relocation cleanup uses the
original exec object count, excluding the VMAs appended by the
command parser.
(cherry picked from commit 2a0158925fb943c7ba8f3216e2734952128defc9) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Unmask interrupts only when ACTIVE is true
There is a small race window between intel_rps_boost() reading
a stale ACTIVE state and queuing rps->work, where ACTIVE may be
changed via asynchronous calls triggered by wakeref drop.
This means that rps_work() could be triggered after the GT has
been parked, so unmasking RPS PM interrupts would happen without
holding PM wakelock. This sequence of events may be observed
during live_rc6_ctx_wa() selftest:
1) live_rc6_ctx_wa()
-> intel_engine_pm_put()
-> wakeref_put()
ASYNC1) wakeref_put() callback
-> __engine_park()
-> intel_gt_pm_put_async()
-> intel_gt_pm_put_async_untracked()
-> intel_wakeref_put_async()
ASYNC2) wakeref_put_async() callback
-> __gt_park()
-> intel_rps_park()
-> intel_rps_clear_active() [clear ACTIVE]
WITH INTERRUPTS:
-> rps_disable_interrupts()
-> cancel_work_sync(rps->work)
-> rps_reset_interrupts() [rps->pm_iir = 0]
WITHOUT INTERRUPTS (TIMER mode):
-> rps_stop_timer()
-> cancel_work_sync(rps->work)
2) live_rc6_ctx_wa()
-> intel_gt_wait_for_idle()
-> intel_gt_retire_requests_timeout()
-> dma_fence_wait_timeout()
-> ops->wait() [i915_fence_wait()]
-> i915_request_wait_timeout()
-> intel_rps_boost()
-> intel_rps_is_active() [check ACTIVE]
[OPEN RACE WINDOW]
-> queue_work(rps->work)
-> retire_requests()
-> i915_request_retire()
-> intel_rps_dec_waiters() [from 1 to 0]
If ASYNC1 and ASYNC2 would execute during [OPEN RACE WINDOW],
then:
3) rps_work() executes from the workqueue and may satisfy
"(!pm_iir && !client_boost)" test (in TIMER mode rps->pm_iir
is zeroed by an earlier rps_work() call or never gets a new
value after previous intel_rps_unpark() event), so it jumps
to "out" label, bypassing intel_rps_is_active() guard and
executes gen6_gt_pm_unmask_irq();
4) GT is parked and runtime PM wakelock is dropped, so only
a raw reference in __gt_park() ->
intel_display_power_put_async() remains for 100ms, then the
MMIO write in gen6_gt_pm_unmask_irq() detects missing
wakelock via assert_rpm_wakelock_held() and emits
"RPM wakelock ref not held during HW access" tainting kernel.
Commit 3e7abf814193 ("drm/i915: Extract GT render power state management")
dropped the "if (rps->interrupts_enabled)" guard that
gen6_pm_rps_work() had around this unmask in i915_irq.c.
INTEL_RPS_ACTIVE brackets the same window, since it is set in
intel_rps_unpark() before rps_enable_interrupts() and
rps_start_timer() and cleared in intel_rps_park() before
rps_stop_timer() and rps_disable_interrupts().
Skip unmasking when RPS is no longer active (reaching unmask
operation is independent of INTERRUPT mode). This does not
prevent RPS operation from resuming on the next unpark.
In interrupt mode, intel_rps_unpark() calls
rps_enable_interrupts(), which enables and unmasks the PM
interrupts. In timer mode, it calls rps_start_timer(),
restarting periodic engine-busyness evaluation. The timer
generates software RPS events and queues rps_work() directly,
independently of PM interrupt delivery. Neither mode requires
the late worker to unmask interrupts while the GT is parked
(cherry picked from commit ca4a6deadad15b91ee083afe445fa6bdbfb68206) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate pitch coming from userspace
Validate the pitch, alongside the box dimensions before trying
to copy data from the underlying surface. Fixes possible
out of bounds reads with cursor snooping. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't inherit MNT_UMOUNT in clone_mnt()
MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has
taken out of its namespace. It's never cleared. __detach_mounts()
unhooks a mount that carries it instead of unmounting it.
disconnect_mount() lets an unmounted child stay attached only if its
parent carries it. propagate_umount() takes it as the sign that a mount
is going to be unmounted when it decides what else can be unmounted,
where a chain of locked mounts ends and where a for reparenting an
overmount.
clone_mnt() copies the flags of the source and only masks
MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was
lazily unmounted but is kept alive by a file descriptor can still be
copied when its root is an nsfs or pidfs file because may_copy_tree()
accepts those before checking whether the source is mounted at all:
mount --bind /proc/self/ns/net /tmp/x
exec 3< /tmp/x
umount -l /tmp/x
mount --bind /proc/self/fd/3 /tmp/y
The mount on /tmp/y is attached to the caller's namespace with
MNT_UMOUNT already set and every copy of it inherits the flag again.
That causes a number of bugs:
- Unlink its mountpoint from a mount namespace where it isn't one.
__detach_mounts() takes it for a mount that was unmounted earlier,
unhooks it from its parent and drops the reference the namespace
holds on it. It stays in the namespace with one reference too few
and as its own parent, so it can't be unmounted through the file
descriptor anymore and the namespace never finds it again. When the
namespace goes away it's leaked and points to a freed struct
mnt_namespace that may_change_propagation() and anon_ns_root() read
on the next propagation change or mount_setattr() through the file
descriptor.
- Make it shared and unmount a peer. trace_transfers() follows the
flag from the peer into it and strips it from its peer group.
- Let a propagated umount reach it. gather_candidates() marks it with
T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the
mark is never cleared and every later propagated umount skips it. If
it's the parent of a locked mount handle_locked() takes it as the
cutoff and commits the locked child that should have stayed and
disconnect_mount() leaves that child attached to it, unmounted under
a mounted parent, which is what disconnect_mount() exists to
prevent. When the namespace goes away umount_tree() visits the child
a second time. And once __detach_mounts() has made it its own parent
reparent() never finds the end of the chain of unmounted parents.
A clone is a new mount that has never been unmounted. Add MNT_UMOUNT
to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when
umount_tree() reaches a mount that already has it set. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't copy an unmounted mount tree
may_copy_tree() accepts a mount whose root is an nsfs or pidfs file
before it checks whether that mount is mounted. This exception exists
for nsfs and pidfs mounts. They are part of no mount namespace so
neither check_mnt() nor is_mounted() would let them through and
bind-mounting a nsfsfd or a pidfd wouldn't work.
Problem is that exception also admits a bind mount of such a file when
it was lazily unmounted and is only kept alive by a file descriptor:
mount --bind /proc/self/ns/net /tmp/x
exec 3< /tmp/x
umount -l /tmp/x
mount --rbind /proc/self/fd/3 /tmp/y
With MS_REC or AT_RECURSIVE copy_tree() doesn't stop at the unmounted
mount. It copies every mount that stayed attached to it as well. So if
you have a bunch of overmounts over the nsfsfd or the pidfd the whole
unmounted stack is copied. That's a bug.
So refuse to walk an unmounted tree. Copying its root alone stays
possible. So a bind mount of a namespace that is gone can still be
recreated from a file descriptor on the old one. The file descriptor
pins that mount and its root and __has_locked_children() only reads the
direct children which don't leave the parent's list without
namespace_sem. The internal mounts carry MNT_NS_INTERNAL instead of NULL
and are still walked. Copying an unmounted tree recursively fails with
EINVAL. |
| An improper access control vulnerability in ESET Endpoint Encryption and ESET Full Disk Encryption allow attacker with standard user permissions access a device interface belonging to a privileged kernel driver and send specially crafted requests. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check a submount for references right before unmounting it
shrink_submounts() and mark_mounts_for_expiry() first collect all the
mounts they are allowed to unmount and then unmount them.
Whether a mount is busy is decided by propagate_mount_busy() on the
tree. But unmounting the first mount changes the tree that the second
one propagates into. propagate_umount()
moves a surviving overmount off a copy it unmounts and mounts it where
the copy was mounted. If that's where the propagated copy of the second
victim is looked up the overmount becomes a candidate of the second
umount_tree(). It's childless and so trim_one() commits it without
looking at its reference count.
So a synchronous umount pulls out a busy mount that is in use somewhere
else and marks it MNT_SYNC_UMOUNT while it has users:
umount2(/tmp/plshrink/p1, 0) = 0 errno 0
cwd is (unreachable)
The same two umounts requested one after the other fail with EBUSY.
This needs a mount with MNT_SHRINKABLE, i.e., automounted submounts of
NFS, AFS and CIFS or the tracefs mount below debugfs. Bind mounts
inherit the flag.
Check each mount right before it is unmounted under the same hold of
namespace_sem and mount_lock as the umount itself. Make sure that the
algorithm stays linear. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check the mounts before reading their parents in pivot_root()
path_pivot_root() reads the parents of new_root and of the caller's root
and checks whether they are shared before it checks that either mount is
in the caller's mount namespace. Only namespace_sem is held. That's fine
for a mount that is in the caller's mount namespace.
But new_root can be a file descriptor to a mount that has been unmounted
and that only the file descriptor keeps alive. If that mount stayed
attached to its parent when it was unmounted nothing pins the parent for
it. The final mntput() of the parent unhooks the children under
mount_lock alone and frees the parent afterwards:
pivot_root() close(fd), last ref on the parent
------------ ---------------------------------
ex_parent = new_mnt->mnt_parent
mntput_no_expire_slowpath()
__umount_mnt(new_mnt)
cleanup_mnt()
call_rcu()
IS_MNT_SHARED(ex_parent)
BUG: KASAN: slab-use-after-free in path_pivot_root+0xf1a/0x1840
Read of size 4 at addr ffff8881047382f8 by task pivot_widen/157
path_pivot_root+0xf1a/0x1840
__x64_sys_pivot_root+0x165/0x190
The same goes for the caller's root via chroot(). Both outcomes of the
check end in EINVAL so nothing but the read itself goes wrong. It's the
same thing commit bb4609405752 ("statmount: read the parent of an
unmounted mount under mount_lock") fixed for statmount().
Check that both mounts are in the caller's namespace before their
parents are read. Every path returns EINVAL either way. |
| In the Linux kernel, the following vulnerability has been resolved:
dcache: don't put a mountpoint on a dentry that's being removed
rmdir(), unlink() and rename() call dont_mount() on the victim and then
detach_mounts() with the victim's inode locked. do_lock_mount() takes
the inode lock of the mountpoint and checks cant_mount() so a mount
can't show up after detach_mounts().
But attach_recursive_mnt() makes a second mountpoint for the root of the
source mount so that the mounts already located at the destination can
be put on top of it. No inode is locked for that one and d_set_mounted()
only refuses a dentry that is unlinked. Between detach_mounts() and
d_delete() the victim is still hashed:
rmrace: b passed dont_mount() and detach_mounts(), sleeping
T2: move_mount(S, /tmp/plcant/x, BENEATH) = 0 errno 0 ()
T1: rmdir(/tmp/plcant/d/b) = 0 errno 0
109 107 0:61 /d/b//deleted /tmp/plcant/x rw,relatime - tmpfs tmpfs rw
108 109 0:63 / /tmp/plcant/x rw,relatime - tmpfs T rw
A bind mount of the directory that's being removed is moved beneath an
existing mount while the rmdir() is located between the two calls. The
mount ends up on the removed directory and nothing will ever detach it.
Check cant_mount() in d_set_mounted() as well. dont_mount() raises the
flag under d_lock before detach_mounts() runs so either the mountpoint
is set first and detach_mounts() finds the mount or the flag is seen and
the mount is refused. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: unhash a dentry before detaching the mounts on it
unlink(), rmdir() and rename() remove the entry from the filesystem,
call detach_mounts() on the entry with the inode locked and then call
d_delete() once the inode is unlocked.
The thing is that between detach_mounts() and d_delete() the dentry is
still hashed and positive. But after detach_mounts() nothing covers the
dentry anymore. A lookup that finds this dentry in the dcache can
uncover what the mounts hid.
That's a problem when unlinking files or directories that are
mountpoints in other mount namespaces. Everybody who had the underlying
entry covered can race the detach_mount() call until d_delete() has run.
The race window isn't all that small. It encompasses namespace_unlock()
with a full synchronize_rcu_expedited() grace period and the
inode_unlock() of the entry.
In my experiments three walkers that kept trying read an overmounted
file in 11938 of the 16140 unlinks that removed its mountpoint from a
bind mount of the filesystem within a minute.
Fun fact, d_invalidate() has the same ordering problem but gets it
right. It unhashes the dentry first and detaches the mounts afterwards.
Let's do the same in __detach_mounts():
- A lookup that hasn't found the dentry yet misses it in the dcache and
waits for the directory lock that the caller holds until the name is
gone for good.
- A lockless lookup that found it already fails the mount_lock check
while the dentry still counts as a mountpoint and the d_seq check once
it doesn't, and retries.
This fixes the lockless path. We still need to fix the reference count
lookup in a follow-up patch.
So d_drop() the dentry. The dentry stays positive and held but can't be
found anymore. Then proceed with the detach and unlink.
Reproducer:
The reads were counted with the program below, three walkers for 60 s
in a VM with 4 CPUs. The race window is stretched with the debug patch
pasted here. fs.detach_race_walk_us sleeps in lookup_fast() once it
found a mountpoint dentry and before its mounts are crossed.
fs.detach_race_unlink_us sleeps in vfs_unlink() between detach_mounts()
and d_delete().
// SPDX-License-Identifier: GPL-2.0
/*
* unlink_covered: unlink a file that is a mountpoint in a detached copy of
* its mount, against lookups that open it through that copy.
*
* A is a tmpfs with the file f1 (content SECRET_F) and the plain file
* MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound
* on A'/f1, held through an O_PATH fd on its root once the tree fd is
* closed. Walkers open f1 through that fd while the driver unlinks A/f1,
* where nothing is mounted on it. A walker may read MARK_A or get ENOENT.
* A read of SECRET_F is a hit: the name was found after its mount was
* gone. The lockless walks use openat2(RESOLVE_CACHED).
*
* usage: unlink_covered [-t seconds] [-w walkers]
*/
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <stdatomic.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <linux/openat2.h>
#ifndef __NR_open_tree
#define __NR_open_tree 428
#endif
#ifndef __NR_move_mount
#define __NR_move_mount 429
#endif
#ifndef __NR_openat2
#define __NR_openat2 437
#endif
#ifndef OPEN_TREE_CLONE
#define OPEN_TREE_CLONE 1
#endif
#ifndef OPEN_TREE_CLOEXEC
#define OPEN_TREE_CLOEXEC O_CLOEXEC
#endif
#ifndef MOVE_MOUNT_F_EMPTY_PATH
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004
#endif
#define WORK "/tmp/uc"
#define ADIR WORK "/A"
static int duration = 60, nwalkers = 3;
static atomic_int stop, writer_waiting;
static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER;
static int cur_fd = -1; /* the root of A', -1 wh
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: refuse an automount below a mount that is in no namespace
It's possible to add autmounts even when the parent mount isn't in the
mount namespace of the caller. The only requirement we have is that the
parent mount namespace must not be NULL, i.e., unmounted.
Problem is that clone_private_mount() has MNT_NS_INTERNAL which makes
that trivially true. So that passes the test and attach_recursive_mnt()
accepts that as a mount point and funny enough, count_mounts()
dereferences MNT_NS_INTERNAL. The problem is it is an error pointer...
So we can reach this in userspace via fanotify. A filesystem mark on the
lower filesystem of an overlay reports paths on the layer clone and
reading the event hands out a descriptor on it. For example with debugfs
as the lower layer it goes kaboom:
openat(evfd, "tracing", O_DIRECTORY)
Oops: general protection fault
KASAN: null-ptr-deref in range [0x1d0-0x1d7]
RIP: 0010:count_mounts+0x35/0x200
attach_recursive_mnt
finish_automount
And since that sleeping beauty happens under namespace_sem held for
writing every mount operation on the system blocks from then on.
Congrats.
Use is_mounted() instead which rejects unmounted and internal mounts
alike. The open fails with EINVAL just as it did before
clone_private_mount() used MNT_NS_INTERNAL. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: handle mount locking for automounts correctly
If mounts are propagated across user namespaces, attach_recursive_mnt()
locks every copy of the source mount to protect overmounts from
vanishing and revealing the underlying files or directories.
The user namespace is taken from the caller's mount namespaces since
this is where the mounts end up. Except, that's not always true.
Automounts may legitimately get popped in by tasks located in a
different mount and user namespace during path lookup.
Then check doesn't make sense at that point. The copy in the namespace
of the parent - which may be the host's - is now locked and the host
cannot change the flags of its own mounts anymore.
Here's the reproducer:
- host has debugfs mounted nosuid,nodev,noexec and shared
- tracefs automount below it is not yet active
- hand a child process a directory descriptor on that mount
- child process enters auser and mount namespace
- child process' namespace now holds a locked copy of the host's debugfs
mount that receives propagation from it
- child process stats "tracing/." through the descriptor
- lookup runs on the host's mount so the automount lands below the host's mount
- propagation puts a copy below the child's copy
- both try to clear the flags on the mount they got, with a bind remount:
host, on its own automount: MS_REMOUNT|MS_BIND = EPERM
child, on the copy in its namespace: MS_REMOUNT|MS_BIND = 0
So the lock landed on the host's mount instead of the child's copy.
Congrats. So we need to compare with the owner of the namespace the
mount actually gets mounted on. For all regular cases that is the
caller's mount namespace and so nothing changes.
Detached trees in anonymous mount namespaces by be handed over via
SCM_RIGHTS or inherited in other ways on purpose so the attaching task's
mount namespace is authoritative, not the creator of the detached tree. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: exar: initialize the ID before registering its cleanup
devm_add_action_or_reset() invokes the cleanup action immediately when
registering the action fails. gpio_exar_probe() currently stores the
allocated ID in exar_gpio only after registering the action, so that
failure makes exar_devm_ida_free() release ID 0. If the allocated ID is
nonzero, this leaks that ID and can free ID 0 belonging to another device.
Store the ID before registering the cleanup action so both the immediate
failure path and normal device teardown release the correct allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Free the BO cache size list on teardown
vc4_bo_cache_destroy() purges the cached BOs but never frees the size
list, leaking it on every unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: em_text: reject unterminated algo before autoload
This is a follow-up to commit 9c572a83037a ("net/sched: fix potential
stack infoleak in em_text_dump()"), which zero-initialised the dump-side
struct. Sashiko pointed at a pre-existing bug that exposed the change-side
input-validation gap open.
em_text_change() casts the raw netlink attribute payload to struct
tcf_em_text and passes conf->algo, a 16-byte array with no enforced NUL
terminator, to textsearch_prepare(). On the TS_AUTOLOAD retry
textsearch_prepare() calls request_module("ts_%s", algo); vsnprintf()
walks %s until it finds a NUL, so an algo[] with no NUL reads past the
array into the adjacent struct fields and payload and feeds those bytes
to the usermode helper command line. This is an out-of-bounds read and
a kernel memory disclosure.
Reject the attribute when no NUL exists within TC_EM_TEXT_ALGOSIZ bytes,
matching the check xt_string has had since 3ab720881b6e.
Conditions to recreate the bug:
- CAP_NET_ADMIN on the target netns (namespace-local via unshare -Urn
is enough)
- install clsact on an interface, then add a basic filter with one text
ematch whose algo[] is 16 bytes with no NUL (e.g. "A"*16) and
pattern_len at least 1
- the add fails with -ENOENT and the kernel invokes modprobe with a
module name made of "ts_" plus the 16 bytes and the adjacent payload |
| In the Linux kernel, the following vulnerability has been resolved:
amt: send the relay's General Query directly from the receive path
An skb queued in a qdisc can outlive the tunnel it references
through a raw pointer in skb->cb. For example, with igmp_qrv set
to 1 on the relay a tunnel lives for 135s, so a netem delay of
180s on the amt device outlives it; when the tunnel expires and is
freed, the subsequent dequeue triggers a use-after-free in
amt_dev_xmit().
BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20
Call Trace:
amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262]
dev_hard_start_xmit+0x22f/0x620
sch_direct_xmit+0x12e/0xac0
netem_dequeue+0x333/0xc50
net_tx_action+0x35c/0xa60
amt_send_igmp_gq() and amt_send_mld_gq() are only called from
amt_request_handler(), inside the rcu_read_lock_bh() section of
amt_rcv(). amt_request_handler() already has the tunnel the query is
for: it found or created it inside that section. Queuing the query with
dev_queue_xmit() only leads back into amt_dev_xmit(), which strips the
Ethernet header and calls amt_send_membership_query() for that tunnel.
Make that call directly from the two senders instead, the same way
amt_send_advertisement() transmits from the receive path. The query
never waits in a qdisc, the tunnel is only dereferenced inside the
RCU section that found or created it, and nothing is stored in
skb->cb, so no lookup or refcount is needed. Remove the query branch
of amt_dev_xmit(), amt_skb_cb() and struct amt_skb_cb, which have no
users left.
Behaviour changes:
- The relay's own General Queries no longer pass through the amt
device's egress path: its qdisc, tc egress (clsact/tcx), the
netfilter egress hook and packet taps. They are still visible as
UDP on the underlay.
- A query that is sent successfully is no longer counted as
tx_dropped. The old query branch left through the unlock label,
which counted every sent query as dropped.
- A query that reaches amt_dev_xmit() on a relay from elsewhere,
such as a userspace querier, is now dropped at the IGMP/MLD type
switch. Before, it trusted whatever skb->cb held, and a NULL
tunnel hit the WARN_ON(1). |
| In the Linux kernel, the following vulnerability has been resolved:
cxgb4/ch_ktls: disable softirqs around tid_list erases
chcr_ktls_cpl_act_open_rpl() inserts into tid_list from the receive path
using xa_insert_bh(). The array is shared by the adapter's connections
and initialized with XA_FLAGS_LOCK_BH. However, chcr_ktls_dev_del() and
the chcr_ktls_dev_add() error path use xa_erase(), which takes the XArray
lock without disabling softirqs.
When cleanup runs with softirqs enabled, a receive softirq for another
connection on the same CPU can interrupt the erase and spin on the lock
held by the interrupted task. Use xa_erase_bh() at both sites to match
the insertion path. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: use the local P2P device on metadata allocation failure
nvmet_req_alloc_p2pmem_sgls() assigns req->p2p_dev only after the data
and metadata SGL allocations succeed. If the data allocation succeeds
but the metadata allocation fails, out_free_sg passes req->p2p_dev to
pci_p2pmem_free_sgl() before that assignment has taken place.
Pass the local p2p_dev argument instead, so cleanup uses the same PCI
device as the successful data allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: adau1372: allow sleepy powerdown GPIOs
gpiod_set_value() emits a WARN when the GPIO provider indicates that it
can sleep, as is typical for I2C controlled GPIO expanders. Since the
powerdown GPIO is only manipulated in process context, use the _cansleep
variant instead. This lets the driver use sleepy GPIOs to power off the
chip. |
