| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ION-DTN versions before 4.2.0 contain an out-of-bounds read vulnerability in the decodeSdnv function that allows unauthenticated remote attackers to read memory by sending truncated SDNV values. Attackers can send a UDP datagram to the LTP link service input port with a truncated SDNV to trigger reads up to nine bytes past buffer boundaries and underflow byte counters. |
| A double stack-based buffer overflow was found in the BlueZ AVRCP controller implementation. A nearby BR/EDR peripheral can send a crafted AVRCP player-settings response that supplies an attacker-controlled attribute count, causing avrcp_list_player_attributes_rsp() and avrcp_get_current_player_value() in profiles/audio/avrcp.c to write attacker-controlled data past fixed-size stack buffers, potentially leading to a crash or code execution in the bluetoothd daemon. |
| node-forge through 1.4.0 fails to validate element count in nested DigestAlgorithm sequences during RSA PKCS#1 v1.5 signature verification. Attackers can embed garbage bytes inside the DigestAlgorithm sequence to forge valid signatures for arbitrary messages using low-exponent RSA keys. This is an incomplete fix for CVE-2026-33894. |
| A potential security vulnerability has been identified in the HP Support
Assistant for versions prior to 9.53.2.0. The vulnerability
could potentially allow a local attacker to escalate
privileges due to insufficient access controls. |
| A maliciously constructed mail header could lead to a one byte read past the end of a buffer. This vulnerability was fixed in Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. |
| Buffer overflow in GPU in Google Chrome on on Windows prior to 152.0.7977.75 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Buffer Overflow vulnerability in Shenzhen Jixiang Tengda Technology Co., Ltd. Tenda A18 v.15.13.07.09 allows a remote attacker to execute arbitrary code via the fromSetCmdlineRun function |
| A denial-of-service security issue exists within FactoryTalk® Historian Machine Edition. A network adjacent attacker who is authenticated could send crafted requests to the web interface, resulting in buffer overflow conditions that may cause the device to crash and become unresponsive. |
| There is an out of bounds write vulnerability due to improper bounds checking resulting in a large destination address when parsing a DSB file with Digilent DASYLab. This vulnerability may result in arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted DSB file. The vulnerability affects all versions of DASYLab. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) reject implausible blackbox record_count
adm1266_nvmem_read_blackbox() loops over a record_count that comes
straight from byte 3 of the BLACKBOX_INFO response. The destination
buffer is data->dev_mem, sized for the nvmem cell's declared 2048
bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64).
A device that reports a record_count greater than 32 -- whether due
to firmware bugs, bus corruption, or a non-responsive slave returning
0xff -- would walk read_buff past the end of the dev_mem allocation
on the trailing iterations.
Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here)
before entering the loop and return -EIO on any larger value, so a
malformed BLACKBOX_INFO response cannot drive the loop out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: bound bulk IN response length to the received transfer
usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of
the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len)
into the caller's buffer. bpkt_len is fully controlled by the device
and is only checked against ibuf_len; ibuf_len in turn is checked
against usbio->txbuf_len, not against rxbuf_len:
if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) ||
(ibuf_len > (usbio->txbuf_len - sizeof(*bpkt))))
return -EMSGSIZE;
txbuf_len and rxbuf_len are taken independently from the bulk OUT and
bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or
malfunctioning device that advertises a large bulk OUT endpoint and a
small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such
as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and
hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy() then
reads up to txbuf_len - rxbuf_len bytes past the end of the rxbuf slab
object. The over-read bytes are handed back to the i2c layer and on to
user space through i2c-dev, disclosing adjacent slab memory; with KASAN
this is reported as a slab-out-of-bounds read.
The number of bytes actually received is already known: act equals the
URB actual_length and is bounded by rxbuf_len. Reject any response
that claims more payload than was received, mirroring the existing
"act < sizeof(*bpkt)" check just above.
The control path (usbio_ctrl_msg()) is not affected: it uses a single
buffer (ctrlbuf) for both directions, so its analogous copy can never
leave the allocation.
Found by code review. The out-of-bounds read was confirmed under
AddressSanitizer with a faithful userspace model of usbio_bulk_msg()'s
receive path (an rxbuf_len-sized buffer, the same act/ibuf_len/bpkt_len
checks and the memcpy). A USB raw-gadget + dummy_hcd reproducer is
also available. |
| In the Linux kernel, the following vulnerability has been resolved:
partitions: aix: bound the pp_count scan to the ppe array
aix_partition() reads the physical volume descriptor into a fixed-size
struct pvd and then scans its physical-partition-extent array:
int numpps = be16_to_cpu(pvd->pp_count);
...
for (i = 0; i < numpps; i += 1) {
struct ppe *p = pvd->ppe + i;
...
lp_ix = be16_to_cpu(p->lp_ix);
pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a
fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the
on-disk pp_count. pp_count is an unvalidated __be16 read straight from
the descriptor, so a crafted AIX image with pp_count larger than 1016
drives the loop to read pvd->ppe[i] past the end of the allocation (up
to 65535 entries, ~2 MB out of bounds).
The partition scan runs without mounting anything, when a block device
with a crafted AIX/IBM partition table appears (an attacker-supplied
image attached with losetup -P, or a device auto-scanned by udev), via
msdos_partition() -> aix_partition().
Clamp the scan to the number of entries the ppe[] array can hold. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_read_to_pagecache() to pause on subreq failure
Fix netfs_read_to_pagecache() so that it pauses the generation of new
subrequests if an already-issued subrequest fails. |
| async-tar is a tar archive reading/writing library for async Rust. Prior to version 0.6.1, async-tar mis-applies a buffered PAX size extension to an intermediary extension header (a GNU longname L, a GNU longlink K, or a PAX x/g header) instead of to the next file entry. POSIX requires a PAX extended-header record set to describe the next file entry, never an intervening extension header. Because poll_next_raw (src/archive.rs) threads the buffered PAX records into the size computation of whatever raw header it reads next — and that header can be an intermediary L — the stream cursor is advanced by an attacker-chosen amount when the L body is consumed. The parser then desyncs relative to a POSIX-correct tar parser (e.g. GNU tar), reading subsequent bytes at the wrong block boundary. This issue has been patched in version 0.6.1. |
| Out-of-bounds Write and Improper Validation of Array Index vulnerability in Samsung Open Source TizenFX Samsung/TizenFX allows Overflow Buffers. |
| Error in handling the PlatformLangCodes UEFI variable could cause a buffer overflow, leading to resource exhaustion and failure. |
| An improper physical access control issue exists in ShizenBox2 (dev-conf). If exploited, an attacker with physical access to the product may execute bootloader commands without authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix cancellation of a DIO and single read subrequests
When the preparation of a new subrequest for a read fails, if the
subrequest has already been added to the stream->subrequests list, it can't
simply be put and abandoned as the collector may see it. Also, if it
hasn't been queued yet, it has two outstanding refs that both need to be
put. Both DIO read and single-read dispatch fail at this; further, both
differ in the order they do things to the way buffered read works.
Fix cancellation of both DIO-read and single-read subrequests that failed
preparation by the following steps:
(1) Harmonise all three reads (buffered, dio, single) to queue the subreq
before prepping it.
(2) Make all three call netfs_queue_read() to do the queuing.
(3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't
know the length of the subreq at this point.
(4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq
and then call netfs_read_subreq_terminated() to deal with it. This
will pass responsibility off to the collector for dealing with it. |
| A vulnerability was identified in Tenda HG10 300001138. Impacted is the function formWlanSetup of the file /boaform/formWlanSetup of the component Boa Web Server. The manipulation of the argument ssid leads to buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. |
| A vulnerability was determined in Tenda HG10 300001138. This issue affects the function formLogin of the file /boaform/formLogin of the component Boa Web Server. Executing a manipulation of the argument Username can lead to buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. |
