| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Unsigned integer underflow in wstrncat() in src/port.c in wolfSSL wolfSSH from v1.4.11 through v1.5.0 on non-Windows platforms allows an authenticated remote attacker to write one out-of-bounds null byte past the end of a stack buffer by sending a crafted SFTP path. wolfSSH_RealPath() in src/ssh.c appends each path component with a remaining-size bound (outSz - curSz) rather than the full destination size, so once the accumulated path reaches half the output buffer the size_t computation n - strlen(s1) - 1 wraps to near SIZE_MAX. The strncat() call is then effectively unbounded and copies the whole component; when that component exactly fills the remainder of the buffer, its terminating null is written one byte past the end. The caller's own length check keeps the copied data inside the buffer, so the overflow is limited to that single null byte, which may corrupt an adjacent stack value and crash the process. Applications that call the public wolfSSH_RealPath() with an output buffer smaller than the input path are additionally exposed to an unbounded copy, because the word32 expression outSz - segSz in that length check also wraps. |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.0.0 to 2.11.0 in github.com/xuri/excelize/v2 and from 1.1.0 to 1.4.1 in github.com/xuri/excelize, ColumnNameToNumber accumulates a bijective base-26 value in int64 without detecting overflow, allowing an invalid long column name to wrap to zero with no error. ColumnNameToNumber accepts the overflowing name VGWQHXLSDVIKWV, after which checkSheetR0 and xlsxWorksheet.checkRow use the wrapped column value as an index. When a crafted worksheet uses an overflowing column name in a row normalized by checkSheetR0 or checkRow, the wrapped zero column becomes a negative slice index during worksheet normalization, allowing an attacker to panic and terminate the calling process. No fixed version is available as of this review. |
| SAP NetWeaver and SAP Web Dispatcher do not properly validate certain fields in specially crafted requests handled by an internal protocol component. An unauthenticated attacker could send a malicious request that triggers a memory-handling error, causing the affected process to crash. Successful exploitation can therefore result in a high impact on the availability of the affected application. There is no impact on the confidentiality or integrity of the application. |
| SAP Cloud Connector contains an improper authorization check, which could be exploited by a low-privileged attacker through specially crafted requests. Exploitation requires the attacker to be on an adjacent network. Successful exploitation could allow the attacker to obtain limited information about internal systems, resulting in low impact on confidentiality. There is no impact on integrity and availability. |
| odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. In commit cfddd56 and earlier, an unauthenticated host on the same link can first obtain two bindings through normal DHCPv6 SOLICIT and REQUEST exchanges and then send a crafted RENEW containing multiple IA_NA options. An earlier matched IA consumes most of the response buffer, an unmatched IA causes the build_ia() status branch to write and return a NOBINDING response larger than the remaining space, and a subsequent matched IA is processed after dhcpv6_ia_handle_IAs() subtracts that over-return from an unsigned size_t. The resulting underflow disables subsequent length checks and permits attacker-controlled IA_ADDR serialization beyond the 512-byte stack buffer pdbuf in handle_client_request(). The stack canary terminates odhcpd, and sustained packets can repeatedly disrupt DHCPv6 service while procd respawns the process. The observed configuration does not establish code execution. |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.1.0 to 2.11.0, a Zip64 uncompressed size with the high bit set is converted from uint64 to a negative int64 before signed size-limit checks and allocation. ReadZipReader obtains UncompressedSize64 through FileInfo.Size and passes the wrapped negative value to readFile. When a crafted Zip64 entry declares an uncompressed size from 2^63 through 2^64-1 and the workbook is opened, the negative size bypasses unzip limits and reaches make as a negative capacity, allowing an attacker to panic during workbook opening. No fixed version is available as of this review. |
| OpENer v2.3/commit 76b95cf, contains an integer underflow in the server-side EtherNet/IP ForwardOpen connection-path parser. This allows a remote attacker to cause a denial of service |
| A flaw was found in libxml2's xmlBuildQName function, where integer overflows in buffer size calculations can lead to a stack-based buffer overflow. This issue can result in memory corruption or a denial of service when processing crafted input. |
| A flaw was found in GIMP's PNM file format parser. When parsing a specially crafted PNM file, the pnmscanner_gettoken() function writes a null terminator one byte past the end of a stack-allocated buffer due to an off-by-one error in the loop boundary check. This could lead to memory corruption, potentially resulting in denial of service or arbitrary code execution. |
| A flaw was found in the file-fits plugin in GIMP. When processing a FITS image file, the plugin calculates memory allocation sizes using signed 32-bit integers for width and height. If a crafted file sets both values to large values, their product exceeds 2^31 and overflows, resulting in an undersized heap-based buffer allocation. This integer overflow issue results in a heap-based buffer overflow when cfitsio subsequently writes a full row of pixels in the buffer, causing memory corruption, potentially leading to arbitrary code execution or a denial of service. |
| A flaw was found in GIMP's PSD file format plugin. This vulnerability, an unsigned integer underflow in the `block_rem` variable, occurs when a user opens a specially crafted `.psd` image file. The underflow leads to parser confusion, enabling an attacker to inject arbitrary data as layer resource blocks. This can ultimately result in arbitrary code execution, allowing the attacker to run malicious code on the victim's system. |
| A flaw was found in GIMP's PSD parser. An integer overflow in read_RLE_channel() can cause an undersized heap allocation for the RLE row-length table, after which subsequent per-row writes corrupt heap memory. This could lead to memory corruption, potentially resulting in denial of service or arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix off-by-one bounds check in RX submit
btintel_pcie_submit_rx() used frbd_index > rxq->count to guard the
FRBD array access, allowing frbd_index == rxq->count to pass through
and index one element past the end of the array. Change the check to
>= rxq->count so every out-of-range index is rejected.
This issue was reported by Claude Mythos. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count
SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter,
and is meant to sit above any value that counter can reach. However, it
is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system
with 4 KiB pages the flag collides with the usage count once that count
reaches 4 TiB.
swap_usage_in_pages() masks bit 30 out, so whenever the real count has
that bit set, every caller of it reads 4 TiB low:
* /proc/swaps understates Used by 4 TiB.
* A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its
"if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff
tears the device down while pages are still swapped out. Nothing in
the rest of swapoff aborts the teardown, so those pages are lost.
Independently of swapoff, the collision also corrupts the counter and the
plist. On a device in normal use, a free that leaves bit 30 set in the
count makes swap_usage_sub() see the flag where there is only count, and
call add_to_avail_list(). It clears the bit with
fetch_and(~SWAP_USAGE_OFFLIST_BIT), leaving the stored count 4 TiB below
the real one, and calls plist_add() on a device that is already listed,
tripping the WARN_ON(!plist_node_empty(node)) in plist_add() and linking
the node a second time.
Change the definition of SWAP_USAGE_OFFLIST_BIT to be based on
atomic_long_t instead. Note that the usage counter field itself is of
this same type, so it is still a valid bit. |
| RIOT is an open-source microcontroller operating system designed for Internet of Things devices and other embedded systems. In 2026.07 and earlier, the nanoCoAP client function nanocoap_sock_get_slice() in sys/net/application_layer/nanocoap/sock.c accepts a Block2 response when _block_cb() sees the expected block number without also verifying that the server-controlled szx and derived offset match the requested block geometry. A malicious CoAP server can return the expected block number with a larger block size, causing the derived offset to exceed the client slice offset and making ctx->offset - offset underflow in _2buf_slice(). The resulting buffer-relative calculation can read before the payload buffer and crash the client, causing denial of service and potentially exposing adjacent memory. No fixed release is available as of this review. |
| named in ISC BIND 9.x before 9.9.7-P2 and 9.10.x before 9.10.2-P3 allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via TKEY queries. |
| dynamic_object_create() in kernel/userspace/userspace.c computed the backing allocation for a dynamically allocated kernel object as obj_size_get(otype) + size, and for thread stack elements as STACK_ELEMENT_DATA_SIZE(size) (a round-up plus fixed overhead), without checking either expression for unsigned wrap-around. A size close to SIZE_MAX makes the computed total wrap to a very small value, so the heap chunk handed out is a few bytes while the object descriptor is still tagged with the full requested type and registered in the kernel object table.
The size argument reaches that arithmetic directly from user mode. k_object_alloc_size() is declared __syscall in include/zephyr/sys/kobject.h, its verifier z_vrfy_k_object_alloc_size() in kernel/userspace/userspace_handler.c is a bare pass-through, and z_object_alloc() only range-checks otype — nothing bounds size. The stack-element branch is additionally reachable through the k_thread_stack_alloc() syscall via kernel/dynamic.c. Because subsequent kernel-object validation checks only the object's type and initialization state, the undersized handle passes K_SYSCALL_OBJ_INIT()/K_SYSCALL_OBJ_NEVER_INIT(), and the matching init syscall (for example k_mutex_init(), k_sem_init(), or k_thread_create()) then writes a complete object over the truncated allocation.
An unprivileged user-mode thread can therefore trigger a supervisor-mode out-of-bounds write into the kernel resource-pool heap, of a size and content it substantially controls, corrupting sys_heap chunk metadata and adjacent kernel objects. Under CONFIG_GEN_PRIV_STACKS the thread-stack branch additionally stores an attacker-influenced wild pointer as a user thread's privileged stack base. The practical result is escape from the CONFIG_USERSPACE sandbox — kernel-level code execution or at minimum kernel memory corruption and system compromise.
Exploitation requires CONFIG_USERSPACE together with CONFIG_DYNAMIC_OBJECTS (also selected by CONFIG_DYNAMIC_THREAD under userspace), and a calling thread with an assigned resource pool. The fix rejects both overflowing computations and frees the partially built descriptor. |
| SumatraPDF is a multi-format reader for Windows. In 3.7.0.22298, LitParseHeader() in src/LitDoc.cpp computes the attacker-controlled hdrLen + nPieces * 16 section offset using signed 32-bit arithmetic without validating the complete result. When the component values make that aggregate calculation overflow to a negative value, pointer construction reaches an invalid read in LitU32(), causing deterministic application termination. The supplied evidence does not demonstrate code execution, information disclosure, arbitrary read, or integrity impact. No fixed version is available as of this review. |
| In display, there is a possible escalation of privilege due to an integer overflow. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11296678; Issue ID: MSV-9167. |
| libmikmod before 3.3.14 contains an integer overflow vulnerability in DSM_Load() in load_dsm.c that allows attackers to trigger heap buffer overflow via crafted track counts. Attackers can supply a DSM module whose numchn and numpat product wraps a 16-bit value, overwriting heap memory to cause crashes or potential code execution. |
