| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An infinite loop in PgBouncer 1.20.0 through 1.26.0 allows an unauthenticated remote attacker to cause a denial of service. A StartupMessage whose options parameter contains an empty parameter name, such as "-c=", makes the ignore_startup_parameters list lookup loop forever. Because PgBouncer serves all clients from a single process, this saturates a CPU core and makes PgBouncer unresponsive to all clients until the process is restarted. |
| The NetX Secure DTLS server sends a HelloVerifyRequest carrying a freshly generated cookie, but never checks the cookie a client returns. The ClientHello parser copies the client's cookie bytes over the value the server issued, and the server then decides whether the client has been verified from the cookie's length alone. A peer that puts any single cookie byte in its first ClientHello skips the verification exchange entirely, so the server has no return-routability check and completes handshakes for forged source addresses. |
| AdonisJS HTTP Server is a package for handling HTTP requests in the AdonisJS framework. Prior to 8.2.2 and 9.1.1, the regular expression returned by router.matchers.slug() contains adjacent greedy repetitions with overlapping character classes. When an application applies this matcher to an attacker-controlled route parameter, a long slug ending in a character rejected by the final assertion causes quadratic backtracking and excessive CPU use. Route matching occurs before route and group middleware, so authentication or rate-limiting middleware attached to the route may not prevent an unauthenticated request from blocking the Node.js event loop and stopping the worker from serving unrelated requests or health checks. This issue is fixed in versions 8.2.2 and 9.1.1. |
| An Improper Handling of Highly Compressed Data vulnerability in the gRPC library used by na-grpcd of Juniper Networks Junos OS allows an authenticated network-based attacker to cause a denial of service via a compressed gRPC request. |
| A Missing Release of Memory after Effective Lifetime vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a complete Denial-of-Service (DoS).
On SRX4000 Series, and SRX5000 Series with SPC3, and MX Series with SPC3, when one or more specific application services like ALGs, IDP/DPI, APPID, SECINTEL, AAMW or AppQoE are configured, a high connections per second churn will cause PFE memory to leak. If the memory is exhausted traffic processing will be impacted.
Use the CLI command show security monitoring to monitor the memory utilization of the PFEs on the FPCs.
This issue affects Junos OS on SRX Series and MX Series:
* 23.4 versions from 23.4R2-S3 before 23.4R2-S7;
* 24.2 versions from 24.2R2 before 24.2R2-S3;
* 24.4 versions before 24.4R2-S3;
* 25.2 versions before 25.2R1-S2, 25.2R2. |
| An Improper Release of Memory Before Removing Last Reference vulnerability in the l2cpd process of Juniper Networks Junos OS and Junos OS Evolved platforms allows an adjacent unauthenticated attacker to cause l2cpd memory exhaustion and Layer 2 control-plane disruption via LLDP traffic when fast receive processing is enabled. |
| An Improper Release of Memory Before Removing Last Reference vulnerability in the l2ald process of Juniper Networks Junos OS and Junos OS Evolved on QFX5K-family platforms allows a configured EVPN peer to cause a denial of service through memory exhaustion via EVPN-VXLAN active-active multihoming route processing. |
| A Missing Release of Memory after Effective Lifetime vulnerability in the l2ald process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a denial of service via crafted packets when the static MAC-IP feature is in use. |
| Inefficient algorithmic complexity in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| Description
NGINX JavaScript (njs) has a vulnerability where the built-in njs engine leaks a libxml2 parser context when xml.parse() fails. The failure path did not register cleanup and the context was not released for the lifetime of the process. An unauthenticated attacker may send requests with malformed XML and can cause unbounded memory growth in long-lived NGINX worker processes.
Impact
This vulnerability may allow remote attackers to send requests that trigger repeated parsing of malformed XML and may lead to NGINX worker termination or denial of service. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A weakness has been identified in beautifier js-beautify up to 1.15.1/2.0.3. The affected element is an unknown function. Executing a manipulation can lead to uncontrolled memory allocation. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 20.3.31, 21.2.23, and 22.1.6, the @angular/platform-server DOM emulation parser can enter an infinite synchronous loop when Angular server-side rendering processes attacker-controlled HTML containing an incomplete DOCTYPE that ends with whitespace at end of input. In Domino lib/HTMLParser.js, after_doctype_name_state emits doctype and EOF tokens without advancing nextchar or leaving the fixed-lookahead state, so the scanner repeatedly handles the same EOF marker. A remote unauthenticated attacker can use this condition through server-side HTML parsing paths such as innerHTML binding to consume a Node.js SSR worker at full CPU, starve the event loop, and stop concurrent and subsequent requests. This issue is fixed in versions 20.3.31, 21.2.23, and 22.1.6. |
| Uncontrolled Resource Consumption vulnerability in mtrudel bandit allows an unauthenticated remote attacker to pin HTTP/2 stream processes indefinitely via a trickle of small WINDOW_UPDATE frames. A stream whose response outruns the connection or stream send window blocks until the peer grants more window, and each block carries a 15 second deadline. Both deadlines restart whenever the peer makes partial progress. Bandit.HTTP2.Connection.finish_data/5 re-queues a partially advanced send in pending_sends with a fresh expires_at, so every WINDOW_UPDATE on stream 0, and every SETTINGS frame, resets the clock. Bandit.HTTP2.Stream.send_data/3 recurses on each stream WINDOW_UPDATE and re-arms a fresh after read_timeout. A peer that grants a few bytes every few seconds keeps the blocked stream process, its Plug state and any resource it holds mid-response alive for as long as it keeps dripping, and repeats this across streams and connections to exhaust server processes and memory.
The two paths are independent. The stream-level block is reached on its own by widening the connection window with a large WINDOW_UPDATE on stream 0 and shrinking the per-stream window with a small SETTINGS_INITIAL_WINDOW_SIZE, so closing only the connection-level path leaves it exploitable.
This issue affects bandit: from 1.4.0 before 1.13.0. |
| vLLM is an inference and serving engine for large language models. Prior to 0.30.0, the Rust frontend's track_http_metrics middleware records the raw HTTP method token as a Prometheus label for requests reaching registered routes. An unauthenticated attacker can send unique arbitrary method tokens to unguarded routes such as /tokenize, causing Prometheus's Family::get_or_create function to permanently create counter and histogram label sets. Those label sets increase process memory usage and enlarge the /metrics response until the service or monitoring path is exhausted. This issue is fixed in version 0.30.0. |
| vLLM is an inference and serving engine for large language models. Prior to 0.30.0, a caller can use the request-level media_io_kwargs field to select the GLMGA video backend and supply large values for the fps and max_frames options without a strict work ceiling. GLMGA constructs and deduplicates an attacker-sized pre-decode frame-index list, allowing a compact request and tiny valid video to consume disproportionate CPU time and memory in the shared media-loading executor. This issue is fixed in version 0.30.0. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier
mlx5_ib_alloc_transport_domain() allocates a transport domain and then
may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked.
Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an
error. Also return 0 explicitly in the no-loopback-capability success
branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init(). |
| Inefficient algorithmic complexity in .NET allows an unauthorized attacker to deny service over a network. |
| Asymmetric resource consumption (amplification) in .NET allows an unauthorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible token leak in mt7996_tx_prepare_skb()
If link_conf or link_sta lookup fails in mt7996_tx_prepare_skb routine,
mt7996 driver leaks an already allocated tx token. Fix the issue
releasing the token in case of error. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in hexpm hex allows an untrusted package mirror to exhaust the memory or disk space of the machine running mix deps.get, mix deps.update, mix hex.package fetch or mix hex.docs fetch.
Hex treats a mirror configured with HEX_MIRROR_URL, HEX_MIRROR or mirror_url as untrusted: it doesn't send credentials to it, and it checks registry signatures and package checksums that the mirror can't forge. Several response paths consume memory or disk in proportion to what the mirror sends before any of those checks run.
Hex.HTTP.request/5 reads the whole response body into memory and decompresses it with :zlib.gunzip/1 whenever the response's Content-Encoding contains gzip, with no limit on the compressed or decompressed size. Hex doesn't ask for compressed responses, so the server decides whether this step runs. It applies to registry, package, docs and API responses.
Package tarballs have no download size limit. Hex 2.5.1 holds the whole tarball in memory and writes it to the cache, and the development branch streams it to a temporary file; the 16 MiB tarball limit is checked only when the file is unpacked. The tarball is then unpacked, into deps/<app> in 2.5.1 and into a staging directory on the development branch, before its checksums are compared with the registry.
mix hex.docs fetch, and mix hex.docs offline when docs are missing, write the docs tarball to disk and extract it with :mix_hex_erl_tar.extract/2 without the 16 MiB compressed and 128 MiB decompressed limits that mix_hex_tarball:unpack_docs/3 applies. The signed registry doesn't cover docs tarballs, so nothing checks them.
Registry responses are also decompressed before their signature is checked, in hex_core code that Hex vendors; that part is tracked in https://github.com/hexpm/hex_core/security/advisories/GHSA-7c4r-cgf9-9jmq.
This issue affects hex: from 0.11.2 before 2.5.2. |
