| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Bluetooth Link Layer Control Procedure (LLCP) implementation for Connected Isochronous Stream (CIS) creation retains an RX node (ctx->node_ref.rx, marked NODE_RX_TYPE_RETAIN) so it can later be reused as the host notification — on the peripheral while awaiting the Host's reply to an LL_CIS_REQ, and on the central for the whole duration of a locally initiated CIS Create. In subsys/bluetooth/controller/ll_sw/ull_llcp_cc.c, the "invalid PDU received" paths of llcp_rp_cc_rx() and llcp_lp_cc_rx() terminated the connection and completed the procedure without releasing that retained node, breaking the invariant checked in llcp_lr_check_done() and llcp_rr_check_done() and orphaning the node's memory.
A peer device within radio range can reach this with a single extra LL Control PDU on an unauthenticated, unencrypted ACL link. Against a peripheral, the attacker sends a valid LL_CIS_REQ and then, before the Host replies, any unrelated LL Control PDU (for example LL_VERSION_IND), which ull_cp_rx() routes into the active remote procedure. Against a central performing a CIS Create, a malicious peripheral answers with LL_UNKNOWN_RSP for CIS_REQ, which is dispatched into the active local procedure. No pairing, encryption or user interaction is required; the code is compiled in when CONFIG_BT_CTLR_PERIPHERAL_ISO or CONFIG_BT_CTLR_CENTRAL_ISO is enabled.
In default builds (CONFIG_BT_CTLR_ASSERT_DEBUG is default y) the retained-node assertion fires immediately, producing a controller fatal error and, typically, a system reset from one injected PDU. With the development assertions disabled, each attempt permanently loses one node from the controller's small LL notification pool (LL_PDU_RX_CNT, 2 * CONFIG_BT_CTLR_LLCP_CONN) together with its memq_link_t; repeating the connect-attack-reconnect cycle exhausts the pool, after which notification allocation always fails, RX flow control stalls, and the non-disableable LL_ASSERT_ERR() in llcp_lp_cc_flush() faults. The impact is limited to availability — the leaked node is orphaned, never reused or double-freed — and recovery requires a reboot. |
| containerd is an open-source container runtime. Prior to 1.7.35, 2.0.12, 2.2.8, and 2.3.5, containerd's layer unpack handler repeatedly traverses directories for certain opaque whiteout configurations. A malicious image layer can trigger repeated directory traversals while opaque whiteouts are processed. Pulling or importing the image can consume CPU, delay container startup, and reduce image-pull concurrency for unrelated deployments. This issue is fixed in versions 1.7.35, 2.0.12, 2.2.8, and 2.3.5. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, the Shovel parameter parser converted attacker-controlled runtime parameter values into non-garbage-collected Erlang atoms before bounding them or checking a fixed allowlist. Exploitation requires network access to the Management HTTP API, valid credentials with both the management and policymaker tags, permission to set Shovel runtime parameters on a vhost, and the rabbitmq_shovel and rabbitmq_shovel_management plugins to be enabled. The attacker can exhaust the node-wide atom table and deny service, and malicious parameters are stored durably and reparsed when workers start, so atom pressure can recur after restart without a live attacker connection. This issue is fixed in versions 4.2.9 and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. Prior to 4.3.5, an authenticated user who can bind a queue to a topic exchange and publish to it can use consecutive # segments in a binding key to make both topic matchers revisit the same trie-node and routing-key-suffix states without memoization. The matcher materializes duplicate destinations before deduplication, causing combinatorial CPU work and memory pressure that can disrupt routing for all tenants. This vulnerability is fixed in 4.3.5. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: Purge async_hold in tls_decrypt_async_wait()
The async_hold queue pins encrypted input skbs while
the AEAD engine references their scatterlist data. Once
tls_decrypt_async_wait() returns, every AEAD operation
has completed and the engine no longer references those
skbs, so they can be freed unconditionally.
A subsequent patch adds batch async decryption to
tls_sw_read_sock(), introducing a new call site that
must drain pending AEAD operations and release held
skbs. Move __skb_queue_purge(&ctx->async_hold) into
tls_decrypt_async_wait() so the purge is centralized
and every caller -- recvmsg's drain path, the -EBUSY
fallback in tls_do_decryption(), and the new read_sock
batch path -- releases held skbs on synchronization
without each site managing the purge independently.
This fixes a leak when tls_strp_msg_hold() fails part-way through,
after having added some cloned skbs to the async_hold
queue. tls_decrypt_sg() will then call tls_decrypt_async_wait() to
process all pending decrypts, and drop back to synchronous mode, but
tls_sw_recvmsg() only flushes the async_hold queue when one record has
been processed in "fully-async" mode, which may not be the case here.
[pabeni@redhat.com: added leak comment] |
| A vulnerability has been found in Calix GigaSpire 26.1.0. The affected element is an unknown function of the file traceroute.cmd. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The presence of this vulnerability remains uncertain at this time. The vendor explains: "After reviewing the researcher's videos, we repeated the test using his described setup: the traceroute cancel request was sent while a second client was connected to the EWI. The second client remained connected and was not interrupted, and we did not observe a forced logout, session invalidation, or loss of EWI availability." |
| A flaw has been found in Calix GigaSpire 26.1.0. Impacted is an unknown function of the file utilities_configurationsave.cgi of the component Web Management Interface. Executing a manipulation of the argument sessionKey can lead to denial of service. The attack can be launched remotely. The exploit has been published and may be used. The existence of this vulnerability is still disputed at present. The vendor explains: "We reproduced the reported request pattern. The observed delay results from expected input-timeout handling while the handler waits for input data. We did not observe a backend crash, resource exhaustion, service instability, or loss of EWI availability, and the interface remained accessible during and after testing." |
| A flaw was found in the SmallRye Fault Tolerance library, which is used by Quarkus to provide strategies like retries and circuit breakers for microservices. The issue occurs when using the ApplyGuard or ApplyFaultTolerance annotations, where the library fails to release internal tracking objects after each request. This causes a steady increase in memory usage that eventually leads to the application slowing down and crashing due to lack of memory. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix memory leak of bio integrity
If nvmet receives commands with metadata there is a continuous memory
leak of kmalloc-128 slab or more precisely bio->bi_integrity.
Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio")
each user of bio_init has to use bio_uninit as well. Otherwise the bio
integrity is not getting free. Nvmet uses bio_init for inline bios.
Uninit the inline bio to complete deallocation of integrity in bio. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix memory leak in tipc_link_xmit
In case the backlog transmit queue for system-importance messages is overloaded,
tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to
memory leak and failure when a skb is allocated.
This commit fixes this issue by purging the skb list before tipc_link_xmit()
returns. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: put dl_stid if fail to queue dl_recall
Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we
increment the reference count of dl_stid.
We expect that after the corresponding work_struct is processed, the
reference count of dl_stid will be decremented through the callback
function nfsd4_cb_recall_release.
However, if the call to nfsd4_run_cb fails, the incremented reference
count of dl_stid will not be decremented correspondingly, leading to the
following nfs4_stid leak:
unreferenced object 0xffff88812067b578 (size 344):
comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s)
hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........
00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N..
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfsd4_process_open1+0x34/0x300
nfsd4_open+0x2d1/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
unreferenced object 0xffff8881499f4d28 (size 368):
comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I....
30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... .......
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfs4_alloc_stid+0x29/0x210
alloc_init_deleg+0x92/0x2e0
nfs4_set_delegation+0x284/0xc00
nfs4_open_delegation+0x216/0x3f0
nfsd4_process_open2+0x2b3/0xee0
nfsd4_open+0x770/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if
fail to queue dl_recall. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix out_fput in iommufd_fault_alloc()
As fput() calls the file->f_op->release op, where fault obj and ictx are
getting released, there is no need to release these two after fput() one
more time, which would result in imbalanced refcounts:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 48 PID: 2369 at lib/refcount.c:31 refcount_warn_saturate+0x60/0x230
Call trace:
refcount_warn_saturate+0x60/0x230 (P)
refcount_warn_saturate+0x60/0x230 (L)
iommufd_fault_fops_release+0x9c/0xe0 [iommufd]
...
VFS: Close: file count is 0 (f_op=iommufd_fops [iommufd])
WARNING: CPU: 48 PID: 2369 at fs/open.c:1507 filp_flush+0x3c/0xf0
Call trace:
filp_flush+0x3c/0xf0 (P)
filp_flush+0x3c/0xf0 (L)
__arm64_sys_close+0x34/0x98
...
imbalanced put on file reference count
WARNING: CPU: 48 PID: 2369 at fs/file.c:74 __file_ref_put+0x100/0x138
Call trace:
__file_ref_put+0x100/0x138 (P)
__file_ref_put+0x100/0x138 (L)
__fput_sync+0x4c/0xd0
Drop those two lines to fix the warnings above. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Implement ref count for SRB
The timeout handler and the done function are racing. When
qla2x00_async_iocb_timeout() starts to run it can be preempted by the
normal response path (via the firmware?). qla24xx_async_gpsc_sp_done()
releases the SRB unconditionally. When scheduling back to
qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed
sp->qpair pointer:
qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21.
qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21
qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400.
qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5
BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx]
Obvious solution to this is to introduce a reference counter. One reference
is taken for the normal code path (the 'good' case) and one for the timeout
path. As we always race between the normal good case and the timeout/abort
handler we need to serialize it. Also we cannot assume any order between
the handlers. Since this is slow path we can use proper synchronization via
locks.
When we are able to cancel a timer (del_timer returns 1) we know there
can't be any error handling in progress because the timeout handler hasn't
expired yet, thus we can safely decrement the refcounter by one.
If we are not able to cancel the timer, we know an abort handler is
running. We have to make sure we call sp->done() in the abort handlers
before calling kref_put(). |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1, Atom exhaustion: OAuth2 JWT tag: scope values. extractscopes/1 parses scopes of the form .tag: and calls rabbitdatacoercion:toatom() to convert to a tag atom. The token signature is verified first, so the attacker cannot forge scopes , but in IdP configurations where scope content is user-influenced, each login with a novel tag value leaks one In deployments where users can influence the scopes included in their IdP-issued JWT rabbitmqauthbackendoauth2 enabled IdP permits attacker-influenced scope values in signed tokens. This issue is fixed in versions 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, mechanisms/1 applied list_to_atom/1 to every colon-delimited token in an attacker-controlled auth_mechanism value, permanently consuming Erlang VM atoms and allowing the node to be crashed with a large request. Exploitation requires the Shovel or Federation plugin to be in use, and setting auth_mechanism requires the policymaker tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| FreeRDP before 3.32.0 fails to close prior serial handles in serial_process_irp_create, allowing a malicious RDP server to exhaust file descriptors. Attackers can send repeated serial IRP_MJ_CREATE requests to accumulate descriptors and terminate the client at the CommReadFile FD_SETSIZE assertion. |
| In sshd and ssh in OpenSSH before 10.6, there is no check for whether the maximum packet length is exceeded during decompression of highly compressed data. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in hexpm hex_core allows an untrusted repository mirror, or a server answering hex_core's API requests, to exhaust the memory of the Erlang VM running hex_core. The same code is vendored in Hex (mix_hex_repo, mix_hex_api) and rebar3 (r3_hex_repo, r3_hex_api).
hex_repo:get_names/1, hex_repo:get_versions/1, hex_repo:get_package/2 and hex_repo:get_policy/2 decompress the registry response with zlib:gunzip/1 and decode the signed envelope before verifying its signature. A mirror doesn't have the repository's private key, but it chooses the compressed bytes, so a small response decompresses into an envelope of any size before the signature check rejects it.
hex_api decodes responses with the application/vnd.hex+erlang content type through hex_safe_binary_to_term:safe_binary_to_term/1, which calls binary_to_term(Binary, [safe]). The safe option prevents atom creation, but it accepts compressed terms and doesn't limit the size of the decoded term, and the check that rejects functions and ports runs after the term has been built. The fix for CVE-2026-21619 added the safe option and that check without bounding the decoded size.
This issue affects rebar3: from 3.9.1 before 3.27.3; hex: from 2.1.0 before 2.5.2; hex_core: from 0.1.0 before 0.20.0. |
| CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |
