| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in mod_auth_digest in Apache Software Foundation Apache HTTP Server before 2.4.69 on all platforms allows an unauthenticated remote client to cause authentication state corruption via concurrent Digest authentication requests when AuthDigestNcCheck is enabled or AuthDigestNonceLifetime is set to 0.
Users are recommended to upgrade to version 2.4.69, which fixes this issue. |
| Use-after-free in the Graphics component. This vulnerability was fixed in Firefox 156, Firefox ESR 153.3, Thunderbird 156, and Thunderbird 153.3. |
| Sandbox escape due to use-after-free in the DOM: Core & HTML component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, and Firefox ESR 140.17. |
| Use-after-free in the CSS Parsing and Computation component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 153.4, and Firefox 157. |
| Sandbox escape due to use-after-free in the Widget: Gtk component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, and Firefox ESR 140.17. |
| Sandbox escape due to use-after-free in the DOM: Core & HTML component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, Firefox ESR 115.42, and Firefox ESR 140.17. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state
sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which
clears the logger pointer without an RCU grace period. Immediately after,
ops_free_list() frees the per-net state while concurrent packets might
still be executing nf_log_packet() under rcu_read_lock()."
Clear the pointer via .pre_exit to make sure rcu readers have completed
before pernet storage is free'd. The change in nf_log_syslog.c is only
done for consistency: it doesn't use pernet data. |
| Use-after-free in the Layout: Text and Fonts component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, Firefox ESR 115.42, and Firefox ESR 140.17. |
| Sandbox escape due to use-after-free in the Graphics component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, Firefox ESR 115.42, and Firefox ESR 140.17. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: properly convert mglist to rcu
Sashiko reported a bug [1] that br_multicast_del_port_group unlists the
port group not using proper rcu helper that preserves the next pointer and
after that immediately frees the port group without waiting for rcu grace
period. The only rcu walker of mglist is br_multicast_list_adjacent() and
it turns out that function has always been buggy because mglist was never
properly converted to RCU. Fix it by converting it to rcu and moving its
initialization after eth_addr's. Initializing p->next can use
RCU_INIT_POINTER because we have a barrier from the hlist_add_head_rcu call
later, besides we're initializing an unpublished structure anyway.
[1] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260826014200.362304-1-littleddfu%40gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: defer qdisc freeing after failed creation
An RTM_NEWQDISC request can make clsact bind a populated shared ingress
block during ->init(), publishing an embedded mini_Qdisc to lockless
readers. If the same request has an invalid TCA_RATE, estimator setup
fails after ->init(); the unwind removes the pointer but synchronously
frees its containing qdisc while tc_run() may still hold it.
Retire failed qdiscs through the same RCU helper as normal destruction.
Inline the synchronous free into the callback now that no direct callers
remain. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix use-after-free race in sample_restore_put()
Concurrent teardown of TC sample rules sharing the same restore
context may re-read restore->count after dropping restore_lock.
At that point another thread may already have completed cleanup and
freed the restore object.
Use the result of the refcount decrement while holding restore_lock to
determine whether cleanup is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put
In mlx5_eswitch_termtbl_put(), the zero-ref cleanup check reads
tt->ref_count after termtbl_mutex has been released. Two concurrent
callers on the same mlx5_termtbl_handle race: one decrements ref_count
to zero, removes the hash entry, and calls kfree(tt) while the other
has already dropped the mutex and is about to evaluate
if (!tt->ref_count), producing a use-after-free.
Fix this by capturing the result of the decrement into a stack-local
last variable before dropping the mutex. The cleanup decision is now
made entirely under termtbl_mutex, and tt is not touched after
kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-Switch, prevent mc_list repopulation during vport disable
In mlx5_esw_vport_disable(), move esw_apply_vport_rx_mode() ahead
of esw_vport_change_handle_locked() so vport->allmulti_rule is
NULL before the change handler observes it.
During FW-fatal recovery the disable runs while dev->state ==
INTERNAL_ERROR. The promisc query inside esw_update_vport_rx_mode()
fails and returns early, leaving vport->allmulti_rule intact, so
esw_update_vport_mc_promisc() runs and adds MLX5_ACTION_ADD entries
to vport->mc_list whose flow rules are then installed in the FDB
by esw_add_mc_addr(). esw_destroy_legacy_table() tears down the
FDB with those refs still held, corrupting the sub-tree and
leaving dangling flow_rule pointers in vport->mc_list.
Two-stage failure on `echo 1 > /sys/bus/pci/devices/<bdf>/reset`:
refcount_t: underflow; use-after-free.
tree_put_node+0xef/0x110 [mlx5_core]
clean_tree+0x44/0xd0 [mlx5_core] (x5)
mlx5_fs_core_cleanup+0x57/0x1c0 [mlx5_core]
mlx5_unload+0x65/0xd0 [mlx5_core]
... mlx5_health_try_recover
BUG: unable to handle page fault for address: 0000000003000055
down_write+0x1c/0x60
mlx5_del_flow_rules+0x33/0x1f0 [mlx5_core]
esw_del_mc_addr+0x7b/0x170 [mlx5_core]
esw_apply_vport_addr_list+0x56/0xf0 [mlx5_core]
esw_vport_change_handle_locked+0x28b/0x310 [mlx5_core]
mlx5_esw_vport_enable+0x270/0x4a0 [mlx5_core]
... mlx5_load ... mlx5_health_try_recover
esw_apply_vport_rx_mode(false, false) clears vport->allmulti_rule
via its local state machine even when the FW del fails. With the
rule NULL the !IS_ERR_OR_NULL(allmulti_rule) gate in the change
handler closes, no rules are installed during disable, and the
reload starts with a clean mc_list. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Decoupling ep1_in_urb in caiaq dev
The epq_in_urb object belonging to the caiaq device is coupled within
the struct snd_usb_caiaqdev. After usb_submit_urb(epq_in_urb, GFP_KERNEL)
executes successfully, epq_in_urb is successfully added to the urbp_list
queue of the dummy HCD driver (userspace specifies dummy_hcd as the HCD
layer driver for the caiaq USB device).
When init_card() calls snd_usb_caiaq_send_command() which subsequently
fails due to a timeout, and proceeds to call snd_card_free() to release
the card, the embedded ep1_in_urb object is also freed. When the dummy
HCD driver detects that the URB has been unlinked, it returns the URB
(by usb_hcd_giveback_urb()), which triggers [1].
Decouple the ep1_in_urb object from the struct snd_usb_caiaqdev and switch
to using a pointer instead. Separately allocate and manage the memory for
ep1_in_urb to prevent the release of the snd_card memory object from
interfering with it.
midi_out_urb has the same issue as ep1_in_urb and is handled in the same
way.
[1]
BUG: KASAN: slab-use-after-free in usb_free_urb+0x24/0x120 drivers/usb/core/urb.c:96
Write of size 4 at addr ffff88803cee1050 by task ktimers/1/29
Call Trace:
usb_free_urb+0x24/0x120 drivers/usb/core/urb.c:96
dummy_timer+0xaac/0x4d50 drivers/usb/gadget/udc/dummy_hcd.c:2019
__run_hrtimer kernel/time/hrtimer.c:2067 [inline]
__hrtimer_run_queues+0x3eb/0xaf0 kernel/time/hrtimer.c:2124
hrtimer_run_softirq+0x1e1/0x2e0 kernel/time/hrtimer.c:2141
Allocated by task 36:
snd_card_new+0x7b/0x110 sound/core/init.c:184
create_card sound/usb/caiaq/device.c:429 [inline]
snd_probe+0x236/0x1af0 sound/usb/caiaq/device.c:544
Freed by task 36:
snd_card_free_when_closed sound/core/init.c:630 [inline]
snd_card_free+0x138/0x1d0 sound/core/init.c:662
snd_probe+0x162b/0x1af0 sound/usb/caiaq/device.c:553 |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_input: reset device if input_register_device() fails
Probe marks the device DRIVER_OK with virtio_device_ready() before
calling input_register_device(). If registration fails, the error path
cleared vi->ready and called del_vqs() while the device was still live,
so the device could keep DMA to queues that were already torn down.
Match remove/freeze: call virtio_reset_device() on that path before
tearing down the virtqueues. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_input: stop callbacks before unregistering input device
virtinput_remove() unregisters the input device before resetting the
virtio device. virtinput_recv_events() drops vi->lock around input_event(),
so clearing vi->ready does not stop a callback that passed the entry check.
It can still use vi->idev, requeue buffers and kick the queue.
Reset first, as virtinput_freeze() already does. With the preceding core
change, reset waits for callbacks before input_unregister_device() can
free vi->idev. Recheck vi->ready after taking the lock again: keep draining
completed events so an input packet is not truncated, but stop requeueing
buffers and kicking the queue.
With evdev attached, input_unregister_handle() currently waits for an RCU
grace period, which also waits out IRQ callbacks. This masks the lifetime
bug on PCI and MMIO, but does not protect sleepable callbacks on other
transports. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: Fix UAF of btusb_data by rx_work
btusb_close() and btusb_flush() cancel data->rx_work with the
asynchronous cancel_delayed_work(), so if btusb_rx_work() is already
running on another CPU it keeps running after the cancel returns.
btusb_disconnect() calls hci_unregister_dev(), which invokes
btusb_close(), and then frees the btusb_data. A still running
btusb_rx_work() then dereferences the freed data:
while ((skb = skb_dequeue(&data->acl_q)))
data->recv_acl(data->hdev, skb);
Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also
has to happen after btusb_stop_traffic(), otherwise an URB completion
racing with the cancel can requeue the work right after it has been
waited for. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix fib6 walker UAF on seq stop
ipv6_route_iter_active() treats a walker in FWS_U at the table root as
already unlinked. fib6_del_route() can move a still-linked walker into
that same state when the current leaf is the last route at the root,
so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq
private object can then be freed while it remains on
net->ipv6.fib6_walkers. A later route deletion walks the dangling list
and uses the freed walker.
Use the list head as membership state and reinitialize it when
unlinking. Keep the existing w->node check so a never-started iterator
with a zeroed private object is not treated as linked.
The same stop helper is used by /proc/net/ipv6_route and by the BPF
ipv6_route iterator. The BPF show path only widens the race. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix use-after-free of the flow table mask array
tbl_mask_array_realloc() retires the old mask_array before it stops being
reachable:
old = ovsl_dereference(tbl->mask_array);
if (old) {
...
call_rcu(&old->rcu, mask_array_rcu_cb);
}
rcu_assign_pointer(tbl->mask_array, new);
call_rcu() only waits for read-side critical sections already in flight.
tbl->mask_array still points at old between the call_rcu() and the
rcu_assign_pointer(), so a reader entering ovs_flow_tbl_lookup_stats() in
that window picks up old in a fresh critical section that the pending
grace period does not cover.
tbl_mask_array_realloc() runs in process context under ovs_mutex, so the
window is preemptible and can outlast the grace period. Then
mask_array_rcu_cb() frees old before the swap runs:
BUG: KASAN: slab-use-after-free in flow_lookup.constprop.0+0x2bf/0x2f0
Read of size 8 at addr ffff888020b3e018 by task poc/741
flow_lookup.constprop.0+0x2bf/0x2f0
ovs_flow_tbl_lookup_stats+0x4a3/0x5c0
ovs_dp_process_packet+0x19c/0x710
ovs_vport_receive+0x243/0x390
internal_dev_xmit+0x81/0x170
Freed by task 728:
kfree+0x16a/0x4e0
rcu_core+0x853/0x1030
Publish the new array before retiring the old one. The kfree_rcu() that
call_rcu() replaced ran after the swap. |
