| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in Windows DHCP Server allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Windows UI Immersive Server allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Direct Composition allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Win32K - GRFX allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Universal Plug and Play (UPnP) Device Host allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Fix page dirtying in sev_gmem_post_populate()
set_page_dirty() requires that the caller holds some kind of lock to
ensure that the page's mapping does not concurrently go away.
That is not the case for a random page we got from get_user_pages_fast(),
so use set_page_dirty_lock().
[sean: tag for stable] |
| In the Linux kernel, the following vulnerability has been resolved:
autofs: ignore notification errors from a replaced pipe
autofs_notify_daemon() takes a reference to the current notification
pipe under wq_mutex, then drops the mutex before writing the request. The
write can block while the daemon enters catatonic mode and installs a
replacement pipe.
If the old pipe's reader is then closed, the delayed write returns -EPIPE
and the generic error path enters catatonic mode again. That transition
acts on the current superblock state, closes the replacement pipe, and
releases the new daemon generation's wait queues.
Only enter catatonic mode when the pipe which failed is still the current
pipe. Factor the already-locked transition so the identity check and state
change are atomic with respect to another replacement.
This was reproduced on v7.3-rc5-337-gff47652a4b66c in a local QEMU guest.
An unprivileged UID 65534 lookup filled the old packet pipe before a
normal CATATONIC/SETPIPEFD restart. On the unmodified kernel, the new pipe
received HUP and both a pending victim lookup and a later lookup failed
with ENOENT in two out of two fresh-mount runs.
With this change, the new pipe remained active, received an intact
304-byte request, and both victim lookups completed in two out of two
runs. Normal lookup and restart-without-a-blocked-writer controls passed.
No KASAN, oops, refcount, or lock diagnostic was observed. A source
reproducer and complete local logs are available privately on request.
The demonstrated impact is limited to denial of a shared autofs service
during a legitimate daemon restart. No memory corruption, information leak,
privilege escalation, or code execution primitive was observed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: dwmac1000: clear the RGMII status interrupt
Since commit 2e2c878a3141 ("net: stmmac: remove SGMII/RGMII/SMII
interrupt handling") nothing on the RGMII path reads GMAC_RGSMIIIS, so
RGSMIIIS stays pending behind GMAC_INT_MASK from the first link change
on. stmmac_resume() resets the MAC in stmmac_hw_setup(); the reset sets
GMAC_INT_MASK to 0 until dwmac1000_core_init() writes the mask again,
and the pending status storms the line:
dwmac_dma_interrupt: unexpected status 04000000
A register dump at the first message on ODROID-HC4 showed it:
core int_status 00000001 int_mask 00000000 pmt 00000000 rgsmiiis 0000000d
When the resume thread runs on the CPU that takes the MAC interrupt,
the storm starves it: a soft lockup, then a watchdog reset or a hang.
Read GMAC_RGSMIIIS in dwmac1000_irq_status() when the status is not
masked, as the driver did before 2e2c878a3141; the read clears it.
Wake-on-LAN resume from s2idle with the resume thread and the MAC
interrupt on one CPU: Helios64 (dwmac-rk), 7.3-rc6, soft-locked in 3 of
3 resumes without a fix and in 0 of 10 with this patch; it ran with an
out-of-tree dwmac-rk change that keeps the GMAC powered across suspend.
ODROID-HC4 (dwmac-meson8b): 0 of 10 with this patch, 2 of 2 without a
fix on a 7.3-rc5 build. irq_rgmii_n went up by one per resume. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssm-prueth: Move setting of netops to fix crash
icssm_prueth_netdev_init() calls of_phy_get_and_connect() before
ndev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: avoid hashing the network namespace pointer
The netlink rhashtable key includes a raw struct net pointer and a
user-controlled port ID. Both /proc/net/netlink and socket diagnostics
expose the table's bucket order. By binding and rebinding chosen
NETLINK_USERSOCK port IDs, an unprivileged reader can distinguish equal
buckets and recover the low bits of the Jenkins hash. Its 32-bit seed
and the limited set of kernel-image slides can then be searched offline
to recover the address of init_net.
Use the namespace's unique, non-address net_cookie in the comparison
key instead. It is assigned before the per-net initializers run and
remains unchanged for the namespace's lifetime. The lookup key and
object hash are still built by netlink_compare_arg_init(), keeping
lookup, insertion, removal and rehashing consistent while preserving
namespace separation. Neither public table walker needs to change.
Reading the socket's namespace cookie in netlink_compare() is safe
under RCU, including during namespace teardown. netlink_release()
removes the socket from the hash table and defers its final put with
call_rcu(). cleanup_net() runs the per-net exit methods and waits for
outstanding RCU callbacks with rcu_barrier() before freeing namespace
storage.
Unlike ns.ns_id, net_cookie is also available and initialized during
setup_net() in older stable kernels, making the change straightforward
to backport to v5.15 and later. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Disable interrupts while holding delayed_cmd_lock
target_do_delayed_work() takes dev->delayed_cmd_lock with a plain
spin_lock(). It runs from system_percpu_wq, so interrupts stay enabled
while the lock is held. Every other acquisition of that lock uses
spin_lock_irqsave(): target_handle_task_attr() and
transport_complete_ordered_sync() in target_core_transport.c, and
target_non_ordered_release() in target_core_device.c.
That was safe while every caller of transport_complete_task_attr() ran
in process context: target_complete_ok_work() from target_completion_wq,
transport_complete_qf() from dev->qf_work_queue, and
transport_generic_request_failure() from the submit and execute paths.
Since commit 06933066d88a ("scsi: target: Add support for completing
commands from backend context") that is no longer true. With
complete_type=1 on a fabric that sets direct_compl_supp,
target_complete() runs target_complete_ok_work() inline in the backend's
completion context, which target_complete_cmd_with_sense() documents as
"May be called from interrupt context". For iblock that is the bio
end_io.
target_complete_ok_work() starts with transport_complete_task_attr(),
which takes delayed_cmd_lock in two ways:
- Every ORDERED command is put on dev->delayed_cmd_list by
target_handle_task_attr() and dispatched from there by
target_do_delayed_work(), which marks it SCF_TASK_ORDERED_SYNC. Its
completion therefore goes through transport_complete_ordered_sync().
- A SIMPLE command that completes while an ORDERED command is pending
drops the last reference to the killed dev->non_ordered, and
percpu_ref_put() then runs target_non_ordered_release() in the
completing context.
Both take the lock and, if commands are waiting, call
schedule_work(&dev->delayed_cmd_work), which queues on system_percpu_wq,
i.e. on the CPU that took the completion. Further completions for the
same queue are typically delivered there too, so one arriving while the
work holds the lock spins on it forever.
Reaching this needs complete_type=1, which is not the default
(vhost-scsi, the only fabric with direct_compl_supp, defaults to
TARGET_QUEUE_COMPL), a backend whose I/O completes from interrupt
context, and ORDERED commands from the initiator. Linux virtio_scsi
guests send only VIRTIO_SCSI_S_SIMPLE and never take the ordered path;
any guest that uses the ORDERED task attribute, which vhost-scsi
accepts, does.
target_do_delayed_work() is a work item and always runs in process
context, so spin_lock_irq() is sufficient.
Found by inspection; no runtime report. A single ORDERED command goes
through both acquisitions, so with CONFIG_PROVE_LOCKING the first one
completed through direct completion should produce an inconsistent lock
state report on delayed_cmd_lock (hardirq or softirq, depending on where
the backend completes). |
| Heap-based buffer overflow in Windows TCP/IP allows an authorized attacker to elevate privileges locally. |
| Insufficient granularity of access control in Windows Mobile Device Management allows an authorized attacker to perform tampering locally. |
| Relative path traversal in Windows Shell allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Windows Hyper-V allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Volume Manager Extension Driver allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows Console Driver allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Image Acquisition allows an authorized attacker to elevate privileges locally. |
| Access of resource using incompatible type ('type confusion') in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally. |
| Weak authentication in Active Directory Federation Services (AD FS) allows an unauthorized attacker to bypass a security feature over a network. |
