Export limit exceeded: 416907 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 416907 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1624 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89474 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq256xx: drain usb_work before freeing the charger The USB-PHY notifier queues usb_work, whose handler calls power_supply_changed(bq->charger). The reset devm action only unregisters the notifier and was registered before the power supplies, so devm frees bq->charger on unwind before the action runs; a usb_work still queued can then dereference it. Register the reset action after the power supplies, so it unregisters the notifiers and drains usb_work before the supplies are released. Initialize usb_work and obtain the PHY references before registering the notifiers, so the worker cannot run before the supplies exist. Found by static analysis. | ||||
| CVE-2026-89469 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: lp8727: fix use-after-free in lp8727_release_irq() lp8727_isr_func(), the threaded IRQ handler, is the only caller that arms pchg->work via schedule_delayed_work(). lp8727_release_irq() currently cancels the work before freeing the IRQ, so an IRQ delivered in between can re-arm the work through the threaded handler. After .remove returns the devm layer frees pchg while lp8727_delayed_func() may still run and dereference it. Free the IRQ first so the threaded handler is quiesced and can no longer queue work, then cancel the delayed work to drain the final generation. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89465 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: rt9455: quiesce delayed work before teardown The threaded IRQ handler can queue pwr_rdy_work, max_charging_time_work and batt_presence_work. pwr_rdy_work and batt_presence_work can also queue max_charging_time_work, while batt_presence_work can requeue itself. rt9455_remove() cancels max_charging_time_work before batt_presence_work. The latter can therefore queue max_charging_time_work after it has already been cancelled: rt9455_remove() workqueue cancel pwr_rdy_work cancel max_charging_time_work batt_presence_work queues max_charging_time_work cancel batt_presence_work return devres frees rt9455_info max_charging_time_work dereferences rt9455_info The IRQ also remains registered until devres cleanup and can queue more work after any of the cancellation calls. If rt9455_hw_init() fails after the IRQ has been requested, probe returns without cancelling work that may already have been queued. A pending callback can then access rt9455_info after it has been freed. Register rt9455_cancel_all_delayed_works() through devm_add_action_or_reset() right after devm_power_supply_register(). devres invokes the action in reverse registration order, after the managed IRQ has been freed and before rt9455_info is released, so the delayed works are drained in both rt9455_remove() and the probe error path. Cancel pwr_rdy_work and batt_presence_work before max_charging_time_work because both can queue the latter. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89464 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: twl4030_charger: cancel workers via devm bci is devm-allocated. Two workers (bci->work and bci->current_worker) dereference it. twl4030_bci_remove() disables charging and masks interrupts. It cancels neither worker. A worker pending at remove() can run after devm frees bci. The USB transceiver comes from devm_usb_get_phy_by_node(). devm unregisters its notifier only after remove() returns. A cancel_work_sync() in remove() can then race a notifier reschedule. devm_work_autocancel() and devm_delayed_work_autocancel() avoid that. They cancel the workers during devm release, before bci is freed. The current_worker is registered first, since devm will cancel in reverse order and bci->work can reschedule current_worker. [Move comment about order into the commit message] | ||||
| CVE-2026-89440 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: stop card-detect handling on probe failure request_irq() registers the SD card-detect interrupt and the probe enables it before mmc_add_host() runs. If mmc_add_host() fails, the error path only unmaps the registers and returns: the interrupt stays registered, so the handler keeps running against the host once it is freed. via_sdc_isr() dereferences sdhost and its MMIO base and schedules carddet_work, which via_sdc_card_detect() also runs against freed memory through its container_of() dereference. Add a probe-error path that disables and frees the interrupt and cancels carddet_work before unmapping. carddet_work can re-enable the device interrupt via via_reset_pcictrl(), which restores PCIINTCTRL, so mask it again after cancelling the work. This issue was found by an in-house static analysis tool and confirmed by manual code review. | ||||
| CVE-2026-81008 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: Fix use after free in icc_get() and of_icc_get_by_index() In of_icc_get_by_index() and icc_get(), if the dynamic allocation for path->name fails via kasprintf(), the error handling path directly calls kfree(path) to free the path object and returns an error. However, prior to this point, path_find() calls path_init(), which already links the path's requests into the req_list of the respective interconnect nodes via hlist_add_head(). Directly invoking kfree(path) leaves dangling pointers in the hlist. A subsequent call to icc_get() or icc_set_bw() will traverse or modify these corrupted lists, triggering a slab use afterfree. KASAN report showing the vulnerability when reproducing via debugfs: BUG: KASAN: slab-use-after-free in path_find+0x6f8/0xcfc Write of size 8 at addr fff000000d43f748 by task sh/1 ... Call trace: kasan_report+0xac/0xfc path_find+0x6f8/0xcfc icc_get+0x148/0x380 icc_get_set+0xf8/0x2d0 ... Freed by task 1: kfree+0x1a0/0x4a4 icc_get+0x2cc/0x380 icc_get_set+0xf8/0x2d0 Fix this by replacing kfree(path) with the proper teardown function, icc_put(path), which safely removes the requests from the req_list using hlist_del() and drops the provider usage references before freeing the memory. Additionally, in icc_get(), ensure that the icc_lock mutex is released prior to calling icc_put(path) to avoid a deadlock, as icc_put() internally acquires the same lock. | ||||
| CVE-2026-80979 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: unregister the connection before draining the rx tasklet smc_conn_free() calls smc_ism_unset_conn() only while the link group is still on its device list, and never sets conn->killed. smc_lgr_terminate_sched() unlinks the group immediately and defers killing its connections to a work item, so a connection freed in that window keeps its smcd->conn[] slot with both gates in smcd_handle_irq() open, and the device can re-arm the receive tasklet after tasklet_kill() has returned. On the DMB-nocopy path the ghost send buffer is freed right after that drain, so the re-armed tasklet dereferences it. Unregister unconditionally and drain before the detach at both teardown sites, mirroring rmb_desc, which smc_buf_unuse() releases after the drain. Clear conn->sndbuf_desc before freeing it as well, so a reader that samples the pointer cannot get one that is already freed. | ||||
| CVE-2026-80928 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smack: fix cred UAF in smack_file_send_sigiotask() When inspecting the credentials of another task, objective credentials (->real_cred, accessed with __task_cred()) must always be used. Accessing ->cred on a non-current task is forbidden unless that task is being created or destroyed; a task is allowed to change its own ->cred pointer with no synchronization, and changing ->cred should only affect the current syscall. smack_file_send_sigiotask() was accessing both sets of credentials: First tsk->cred, then __task_cred(tsk). Fix it, always access the objective credentials here. I have tested that this bug can lead to a KASAN-reported UAF of struct cred in smack_file_send_sigiotask(), and that this fix prevents the race. | ||||
| CVE-2026-89769 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/nxp-pit: Fix IRQ leak on cpuhp_setup_state error path When cpuhp_setup_state fails after pit_clockevent_per_cpu_init has successfully called request_irq, the error handling jumps directly to out_pit_clocksource_unregister without freeing the registered IRQ. This leaks the IRQ line and, since kfree(pit) follows, leaves a dangling pointer registered as the interrupt handler's dev_id, potentially leading to a use-after-free if the IRQ fires afterwards. Fix it by calling pit_clockevent_per_cpu_exit to properly release the IRQ before falling through to the existing cleanup chain. | ||||
| CVE-2026-89760 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm, swap: don't free a hibernation slot that is in the swap cache A slot with a folio in the swap cache is freed when the folio leaves the cache, not when its count drops. swap_put_entries_cluster() follows that rule. swap_free_hibernation_slot() does not, it calls __swap_cluster_free_entries() whether or not a folio sits on the slot. Cluster readahead can put one there. It walks a raw page_cluster sized window of offsets around the faulting entry, and a hibernation slot passes __swap_cache_add_check() because it is not a folio and its count is not zero. Freeing the slot then clears the entry under that folio. The folio is now unreachable from the swap table, and the offset goes back to the allocator. The folio is still on the LRU though, so reclaim can pick it up later. It then takes the old offset out of folio->swap and overwrites the table entry there, which by then may belong to someone else. This bug can trigger silent memory corruption, process crashes, or data instability across completely unrelated userspace applications - typically occurring when uswsusp is preparing the hibernation image. I found this while working on giving hibernation slots their own marker in the swap table, which I had discussed with Kairui. (https://lore.kernel.org/linux-mm/abp7aDgYLrxF3Me8@KASONG-MC4/) As far as I know there are no reports, so there is no Reported-by/Closes to add. Check for a cached folio before freeing. The slot is then left in the ordinary state where only the swap cache holds it, and it is freed when the folio leaves the cache, either through the reclaim below or through normal reclaim later. | ||||
| CVE-2026-89747 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free in trace_pipe read on sub-buffer order change Writing to buffer_subbuf_size_kb calls ring_buffer_subbuf_order_set(), which frees every sub-buffer of the ring buffer, including the reader page, and replaces them with newly allocated ones. Readers of trace_pipe hold pointers into those pages. ring_buffer_peek() looks up an event under cpu_buffer->reader_lock but returns the event pointer after dropping the lock, and peek_next_entry() then calls ring_buffer_event_length() and ring_buffer_event_data() on it. If the sub-buffer order is changed in that window, the reader dereferences freed memory: BUG: KASAN: use-after-free in ring_buffer_peek+0x3e0/0x430 Read of size 1 at addr ffff88802a4cf010 by task syz-executor989/6002 Freed by: free_buffer_page kernel/trace/ring_buffer.c:398 [inline] ring_buffer_subbuf_order_set+0x1325/0x18e0 kernel/trace/ring_buffer.c:7444 buffer_subbuf_size_write+0x182/0x280 kernel/trace/trace.c:8221 Take trace_access_lock(RING_BUFFER_ALL_CPUS) around the order change. This is the lock trace_pipe readers already hold across their entire peek-and-print loop, so the swap can no longer race with a reader that is dereferencing a peeked event. | ||||
| CVE-2026-89703 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: set SC_STATUS_FREED in nfsd4_drop_revoked_stid for delegations nfsd4_drop_revoked_stid() handles FREE_STATEID for admin-revoked delegations but does not set SC_STATUS_FREED before releasing cl_lock. revoke_delegation() uses this flag to detect whether FREE_STATEID has already processed the delegation -- without it, the freed delegation is added to cl_revoked via list_add(), producing a use-after-free when cl_revoked is later traversed in __destroy_client(). The SC_STATUS_REVOKED path in nfsd4_free_stateid() (line 7983) already sets SC_STATUS_FREED correctly. Apply the same pattern to the SC_STATUS_ADMIN_REVOKED path in nfsd4_drop_revoked_stid(). | ||||
| CVE-2026-89690 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: defer vfree of compound ops to fix rpc_status UAF The rpc_status netlink dumpit walks every in-flight svc_rqst under rcu_read_lock and, for NFSv4 requests, reads opnums out of args->ops[]. But args->ops is a separate vmalloc buffer freed synchronously by vfree() in nfsd4_release_compoundargs() at the end of every compound. The dumpit's rcu_read_lock pins the svc_rqst struct itself (freed via kfree_rcu), but nothing defers the vfree of the ops buffer across the RCU grace period. A concurrent compound completion can therefore free the buffer while the dumpit is reading it — a use-after-free on vmalloc memory. The trailing seqcount recheck (smp_load_acquire of rq_status_counter) cannot undo a load that already retired against freed memory. Fix by replacing vfree(args->ops) with kvfree_rcu_mightsleep(), which defers the free until after an RCU grace period. This makes the existing rcu_read_lock in the dumpit sufficient to protect the read. The tradeoff is that completed compound ops buffers (up to 200 * sizeof(struct nfsd4_op)) persist in memory slightly longer, across one grace period, before being reclaimed. | ||||
| CVE-2026-89689 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: don't free session slots that are still in use nfsd4_sequence() can free the very slot it is currently processing. When the session shrinker has reduced se_target_maxslots below se_fchannel.maxreqs, the shrink path checks three conditions before calling free_session_slots(): 1. se_target_maxslots < maxreqs (shrink was advertised) 2. slot->sl_generation == se_slot_gen (slot is up-to-date) 3. seq->maxslots <= se_target_maxslots (client acknowledges) However, seq->slotid is never checked against se_target_maxslots. A client using a slot in the range [se_target_maxslots, maxreqs) can satisfy all three conditions: its slot has the current generation (set by a prior SEQUENCE), and it sends sa_highest_slotid <= se_target_maxslots to acknowledge the reduction. free_session_slots() then kfrees every slot at index >= se_target_maxslots, including the caller's own slot. The function continues to write sl_seqid, sl_flags, sl_generation, and stores the dangling pointer in cstate->slot. Later, nfsd4_store_cache_entry() copies up to maxresp_cached bytes of the compound reply into the freed sl_data[] array, corrupting whatever slab object now occupies that address. Additionally, a concurrent thread processing SEQUENCE on a different high-numbered slot can have its slot freed out from under it. NFSD4_SLOT_INUSE is set under nn->client_lock before the lock is released, so any concurrent thread past SEQUENCE will have its slot marked. However, free_session_slots() does not check NFSD4_SLOT_INUSE before freeing. Fix both problems by: 1. Checking that the current request's slotid is below the shrink boundary. 2. Scanning slots in the to-be-freed range for NFSD4_SLOT_INUSE and deferring the shrink if any are active. | ||||
| CVE-2026-89688 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: drop the stateid, not the stateowner, on seqid_op replay retry In nfs4_preprocess_seqid_op() the stateid is obtained from nfsd4_lookup_stateid(), which holds a reference on the nfs4_stid (sc_count) but takes no reference on the stateowner. openlockstateid() merely casts that stid and likewise takes no reference. When nfsd4_cstate_assign_replay() returns -EAGAIN (the replay owner is being torn down, RP_UNHASHED) it has not taken a stateowner reference on that path. The error handling nevertheless called nfs4_put_stateowner(stp->st_stateowner), dropping an so_count reference the function never acquired -- risking a stateowner refcount underflow and use-after-free -- while leaking the sc_count reference held on the stid. The leaked stid reference can also stall a concurrent nfsd4_close_open_stateid() waiting for sc_count to drop. Drop the reference actually held -- the stid -- before retrying. The stateowner stays alive through the reference held by the stid. This mirrors the open path in nfsd4_process_open1(), where the put balances a reference that path explicitly holds on the stateowner. | ||||
| CVE-2026-89677 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix possible fh_compose of wrong dentry in nfsd4_create_file() dentry_create() can hypothetically provide a different dentry than the one passed in. This could happen, for example, if the exported filesystem is NFS, and the server returned to OPEN a filehandle which matched a directory that was already in the dcache. Clearly this would not be expected! If this were to happen the dentry (child) that was already stored in resfhp could be freed and later dereferenced. We shouldn't call fh_compose() until we are certain that we have the final dentry, so this patch moved the fh_compose() call to two places: one for the case where the target already exists, and one after dentry_create() where it was created. | ||||
| CVE-2026-89670 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: hold rcu across localio cmpxchg retry nfsd_file objects are freed via call_rcu (filecache.c:296), and nfsd_file_slab is created without SLAB_TYPESAFE_BY_RCU (KMEM_CACHE(nfsd_file, 0) at filecache.c:789), so the slab page backing a freed nfsd_file becomes freely reclaimable once the RCU grace period elapses. The again: retry block in nfsd_open_local_fh() loads a pointer with cmpxchg and then calls nfsd_file_get(new) (which is refcount_inc_not_zero) without holding rcu_read_lock. The sole caller nfs_open_local_fh() drops rcu_read_lock before invoking this helper, so no outer reader-side critical section covers the load. CPU 0 (nfsd_open_local_fh) CPU 1 (nfsd_file_put_local) ----- ----- new = cmpxchg(pnf, NULL, ...) nf = xchg(pnf, NULL) nfsd_file_put(nf) last ref -> call_rcu() /* grace period elapses; slab page recycled */ nfsd_file_get(new) refcount_inc_not_zero(&new->nf_ref) /* operates on recycled memory */ A non-zero word at the nf_ref offset of the recycled object makes the refcount bump appear to succeed, and the caller then dereferences new->nf_net and new->nf_file out of freed memory. Fix by taking rcu_read_lock() immediately before the cmpxchg and releasing it on all three exits of the if (new) block: the goto-again retry, the lost-race cleanup path, and the install-succeeded path. nfsd_file_put() and nfsd_net_put() stay outside the RCU section so they remain free to block. | ||||
| CVE-2026-89668 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: move nfsd_debugfs_init() after nfsd4_init_slabs() in init_nfsd() nfsd_debugfs_init() runs before nfsd4_init_slabs() in init_nfsd(). If the slab allocation fails, the bare "return retval" bypasses nfsd_debugfs_exit(), leaving orphan debugfs files with stale fops pointers into the freed module text. Move nfsd_debugfs_init() to after the slab init succeeds, so the early return has no debugfs state to clean up. Since debugfs is now the more recently initialized of the two, also update the unwind paths to match reverse-initialization (LIFO) order: run nfsd_debugfs_exit() before nfsd4_free_slabs() in both the init_nfsd() error path and exit_nfsd(). The nfsd debugfs files only reference module-global state and have no dependency on the slab caches, so that reordering is a cleanup with no functional change. | ||||
| CVE-2026-89658 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during NFSv4.0 revoked-state cleanup nfs40_clean_admin_revoked() takes a stateid reference under clp->cl_lock, drops nn->client_lock, and calls nfsd4_drop_revoked_stid(), which dereferences the stateid's client through s->sc_client->cl_lock. The stateid reference does not pin the client, so a teardown racing the dropped lock can free the client while nfsd4_drop_revoked_stid() is still using it. This cleanup runs from the laundromat, so a periodic sweep can race force_expire_client() driven by a write to the clients/<id>/ctl file. Skip a client that is already expiring and otherwise pin it with cl_rpc_users under client_lock before dropping the lock, matching nfsd4_revoke_states(). | ||||
| CVE-2026-89641 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: clear tcon after cifsFileInfo_put() in cifs_file_set_size() When the else branch of cifs_file_set_size() finds a writable file handle via find_writable_file(), it borrows tcon and server from the handle's tlink, attempts the handle-based set_file_size() RPC, and then releases the handle with cifsFileInfo_put(). If set_file_size() fails, execution falls through to the path-based fallback, which reuses the borrowed tcon and server under the "if (tcon == NULL)" guard. Since tcon is not NULL at that point, the guard is skipped. If cifsFileInfo_put() dropped the last reference on a tlink that was already removed from the tlink tree (TCON_LINK_IN_TREE cleared, as happens during reconnection or session teardown), cifs_put_tlink() will have freed tcon; the subsequent set_path_size() call is then a use-after-free. Setting tcon = NULL after cifsFileInfo_put() causes the existing guard to take the cifs_sb_tlink() path, which acquires a fresh reference for the path-based operation or fails cleanly if the session is gone. | ||||