| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Lock User Account plugin for WordPress is vulnerable to user lock bypass in all versions up to, and including, 1.0.5. This is due to permitting application password logins when user accounts are locked. This makes it possible for authenticated attackers, with existing application passwords, to interact with the vulnerable site via an API such as XML-RPC or REST despite their account being locked. |
| SolarWinds Service Desk is affected by a broken access control vulnerability. The issue allows authenticated users to escalate privileges, leading to unauthorized data manipulation. |
| Protection mechanism failure for some Intel(R) NPU Drivers within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| The ngtcp2 project is an effort to implement IETF QUIC protocol in C. In affected versions acks are not validated before being written to the qlog leading to a buffer overflow. In `ngtcp2_conn::conn_recv_pkt` for an ACK, there was new logic that got added to skip `conn_recv_ack` if an ack has already been processed in the payload. However, this causes us to also skip `ngtcp2_pkt_validate_ack`. The ack which was skipped still got written to qlog. The bug occurs in `ngtcp2_qlog::write_ack_frame`. It is now possible to reach this code with an invalid ack, suppose `largest_ack=0` and `first_ack_range=15`. Subtracting `largest_ack - first_ack_range` will lead to an integer underflow which is 20 chars long. However, the ngtcp2 qlog code assumes the number written is a signed integer and only accounts for 19 characters of overhead (see `NGTCP2_QLOG_ACK_FRAME_RANGE_OVERHEAD`). Therefore, we overwrite the buffer causing a heap overflow. This is high priority and could potentially impact many users if they enable qlog. qlog is disabled by default. Due to its overhead, it is most likely used for debugging purpose, but the actual use is unknown. ngtcp2 v1.9.1 fixes the bug and users are advised to upgrade. Users unable to upgrade should not turn on qlog. |
| SimpleSAMLphp SAML2 library is a PHP library for SAML2 related functionality. When loading an (untrusted) XML document, for example the SAMLResponse, it's possible to induce an XXE. This vulnerability is fixed in 4.6.14 and 5.0.0-alpha.18. |
| veraPDF is an open source PDF/A validation library. Executing policy checks using custom schematron files via the CLI invokes an XSL transformation that may theoretically lead to a remote code execution (RCE) vulnerability. This doesn't affect the standard validation and policy checks functionality, veraPDF's common use cases. Most veraPDF users don't insert any custom XSLT code into policy profiles, which are based on Schematron syntax rather than direct XSL transforms. For users who do, only load custom policy files from sources you trust. This issue has not yet been patched. Users are advised to be cautious of XSLT code until a patch is available. |
| LDAP Account Manager (LAM) is a php webfrontend for managing entries (e.g. users, groups, DHCP settings) stored in an LDAP directory. In affected versions LAM does not properly sanitize configuration values, that are set via `mainmanage.php` and `confmain.php`. This allows setting arbitrary config values and thus effectively bypassing `mitigation` of CVE-2024-23333/GHSA-fm9w-7m7v-wxqv. Configuration values for the main config or server profiles are set via `mainmanage.php` and `confmain.php`.
The values are written to `config.cfg` or `serverprofile.conf` in the format of `settingsName: settingsValue` line-by-line.
An attacker can smuggle arbitrary config values in a config file, by inserting a newline into certain config fields, followed by the value. This vulnerability has been addressed in version 9.0. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| SimpleSAMLphp xml-common is a common classes for handling XML-structures. When loading an (untrusted) XML document, for example the SAMLResponse, it's possible to induce an XXE. This vulnerability is fixed in 1.19.0. |
| A security issue was found in Netplex Json-smart 2.5.0 through 2.5.1. When loading a specially crafted JSON input, containing a large number of ’{’, a stack exhaustion can be trigger, which could allow an attacker to cause a Denial of Service (DoS). This issue exists because of an incomplete fix for CVE-2023-1370. |
| Nix is a package manager for Linux and other Unix systems. On macOS, built-in builders (such as `builtin:fetchurl`, exposed to users with `import <nix/fetchurl.nix>`) were not executed in the macOS sandbox. Thus, these builders (which are running under the `nixbld*` users) had read access to world-readable paths and write access to world-writable paths outside of the sandbox. This issue is fixed in 2.18.9, 2.19.7, 2.20.9, 2.21.5, 2.22.4, 2.23.4, and 2.24.10. Note that sandboxing is not enabled by default on macOS. The Nix sandbox is not primarily intended as a security mechanism, but as an aid to improve reproducibility and purity of Nix builds. However, sandboxing *can* mitigate the impact of other security issues by limiting what parts of the host system a build has access to. |
| SAP Fiori applications using the posting library fail to properly configure security settings during the setup process, leaving them at default or inadequately defined. This vulnerability allows an attacker with low privileges to bypass access controls within the application, enabling them to potentially modify data. Confidentiality and Availability are not impacted. |
| Incorrect resource transfer between spheres issue exists in RevoWorks SCVX and RevoWorks Browser. If exploited, malicious files may be downloaded to the system where using the product. |
| An XML External Entity (XXE) vulnerability in HAPI FHIR before v6.4.0 allows attackers to access sensitive information or execute arbitrary code via supplying a crafted request containing malicious XML entities. |
| StrongKey FIDO Server before 4.15.1 treats a non-discoverable (namedcredential) flow as a discoverable transaction. |
| The Kubernetes kubelet component allows arbitrary command execution via specially crafted gitRepo volumes.This issue affects kubelet: through 1.28.11, from 1.29.0 through 1.29.6, from 1.30.0 through 1.30.2. |
| A user with vpuser credentials that opens an SSH connection to the device, gets a restricted shell rbash that allows only a small list of allowed commands. This vulnerability enables the user to get a full-featured Linux shell, bypassing the rbash restrictions. |
| XSS Attack in mar.jar, Monitoring Archive Utility (MAR Utility), monitoringconsolecommon.jar in TIBCO Software Inc TIBCO Hawk and TIBCO Operational Intelligence |
| LocalS3 is an Amazon S3 mock service for testing and local development. Prior to version 1.21, the LocalS3 service's bucket creation endpoint is vulnerable to XML External Entity (XXE) injection. When processing the CreateBucketConfiguration XML document during bucket creation, the service's XML parser is configured to resolve external entities. This allows an attacker to declare an external entity that references an internal URL, which the server will then attempt to fetch when parsing the XML. The vulnerability specifically occurs in the location constraint processing, where the XML parser resolves external entities without proper validation or restrictions. When the external entity is resolved, the server makes an HTTP request to the specified URL and includes the response content in the parsed XML document. This vulnerability can be exploited to perform server-side request forgery (SSRF) attacks, allowing an attacker to make requests to internal services or resources that should not be accessible from external networks. The server will include the responses from these internal requests in the resulting bucket configuration, effectively leaking sensitive information. The attacker only needs to be able to send HTTP requests to the LocalS3 service to exploit this vulnerability. |
| Incorrect behavior order in transition between executive monitor and SMI transfer monitor (STM) in some Intel(R) Processor may allow a privileged user to potentially enable escalation of privilege via local access. |
| The Manage Bank Statements in SAP S/4HANA allows authenticated attacker to bypass certain functionality restrictions of the application and upload files to a reversed bank statement. This vulnerability has a low impact on the application's integrity, with no effect on confidentiality and availability of the application. |
