| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: serialize netif_running() check in enqueue_to_backlog()
Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup().
The root cause is a race condition where packets can escape the backlog
flushing during device unregistration (e.g., during netns exit).
Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration")
introduced a lockless netif_running() check in enqueue_to_backlog() to
prevent queuing packets to an unregistering device.
However, this creates a TOCTOU race window.
A lockless transmitter (like veth_xmit) can pass
the check before dev_close() clears IFF_UP. If the transmitter is then
delayed, flush_all_backlogs() can run and finish before the transmitter
grabs the backlog lock and queues the packet. The packet then escapes
the flush and triggers UAF later when processed.
Fix this by moving the netif_running() check inside the backlog lock.
This serializes the check with the flush work (which also grabs the lock).
We then either queue the packet before the flush runs (so it gets flushed),
or check netif_running() after the flush/close completes (so it gets dropped). |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mvebu: free generic chips on unbind
irq_alloc_domain_generic_chips() allocates generic chip data that must
be freed via irq_domain_remove_generic_chips(). The devres action
mvebu_gpio_remove_irq_domain() only called irq_domain_remove(), which
only frees the generic chips if IRQ_DOMAIN_FLAG_DESTROY_GC is set.
Call irq_domain_remove_generic_chips() explicitly before
irq_domain_remove() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan()
If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks.
Use the existing error handling path to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Release VFCT ACPI table reference
amdgpu_acpi_vfct_bios() fetches the VFCT table with acpi_get_table()
but never releases it. acpi_get_table() takes a reference on the
table (incrementing its validation_count and mapping it on the 0->1
transition); without a paired acpi_put_table() the mapping is leaked
on every call, whether or not a matching VBIOS image is found.
Route all exit paths after the table is acquired through a common
acpi_put_table(). The VBIOS image is copied out with kmemdup() before
the table is released, so it remains valid for the caller.
(cherry picked from commit ca5988682b4cba4cd125a0fa99b2de1239164ae4) |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32-dcmipp: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
dcmipp_bytecap_start_streaming() returned -EINVAL when the source
subdevice could not be resolved from the media graph, before
pm_runtime_resume_and_get() and media_pipeline_start() had been called.
The remaining error paths already converge on the err_buffer_done
label, which calls dcmipp_bytecap_all_buffers_done(...,
VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate
err_pm_put / err_media_pipeline_stop labels are skipped, which is
correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: vivid: fix cleanup bugs in vivid_init()
When platform_device_register() fails in vivid_init(), the embedded
struct device in vivid_pdev has already been initialized by
device_initialize(), but the failure path jumps to free_output_strings
without dropping the device reference for the current platform device:
vivid_init()
-> platform_device_register(&vivid_pdev)
-> device_initialize(&vivid_pdev.dev)
-> setup_pdev_dma_masks(&vivid_pdev)
-> platform_device_add(&vivid_pdev)
This leads to a reference leak when platform_device_register() fails.
Fix this by calling platform_device_put() before jumping to the common
cleanup path.
Also, the unreg_driver label incorrectly calls
platform_driver_register() instead of platform_driver_unregister(),
which breaks cleanup when workqueue creation fails after successful
driver registration. Fix that as well.
The reference leak was identified by a static analysis tool I developed
and confirmed by manual review. The incorrect cleanup call was found
during code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: teardown bugs and resource leaks
Address several teardown issues and resource leaks in the driver's remove
path and error handling:
1. Debounce clock reference leak: The debounce clock (bank->db_clk) is
obtained using of_clk_get() which increments the clock's reference
count, but clk_put() is never called. Register a devm action to
cleanly release it on unbind. Note that of_clk_get(..., 1) remains
necessary over devm_clk_get() because the DT binding does not define
clock-names, precluding name-based lookup.
2. Unregistered chained IRQ handler: The chained IRQ handler is not
disconnected in remove(). If a stray interrupt fires after the driver
is removed, the kernel attempts to execute a stale handler, leading
to a panic. Fix this by clearing the handler in remove().
3. IRQ domain leak: The linear IRQ domain and its generic chips are
allocated manually during probe but never removed. Remove the IRQ
domain during driver teardown to free the associated generic chips
and mappings.
[Bartosz: don't emit an error message on devres allocation failure] |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix metabuf leak in inode xattr initialization
commit bb88e8da0025 ("erofs: use meta buffers for xattr operations")
converted xattr operations to use on-stack erofs_buf instances.
erofs_init_inode_xattrs() uses such a metabuf while reading the inline
xattr header and shared xattr id array.
Some error paths after erofs_read_metabuf() leave through out_unlock
without dropping the metabuf, so the folio reference can leak.
Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a
no-op if no folio has been acquired, and this keeps all paths after
taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix leak of request in netfs_write_begin() error handling
Fix netfs_write_begin() to not leak our ref on the request in the event
that we get an error from netfs_wait_for_read(). |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: rss: fix indir_table and hkey leak on get_rxfh failure
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: always recover the gpu
Previously, in case there was no more work to do, recover worker
wouldn't trigger recovery and would instead rely on the gpu going to
sleep and then resuming when more work is submitted.
Recover_worker will first increment the fence of the hung ring so, if
there's only one job submitted to a ring and that causes an hang, it
will early out.
There's no guarantee that the gpu will suspend and resume before more
work is submitted and if the gpu is in a hung state it will stay in that
state and probably trigger a timeout again.
Just stop checking and always recover the gpu.
Patchwork: https://patchwork.freedesktop.org/patch/704066/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix memory leaks in beacon template setup
The functions ath11k_mac_setup_bcn_tmpl_ema() and
ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates
but fail to free it when parameter setup returns an error.
Since beacon templates must be released during normal execution, they
must also be released in the error handling paths to prevent memory
leaks.
Fix this by using unified exit paths with proper cleanup in the respective
error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix memory leak destroying device
All MT76 rx queues have an associated page_pool even if the queue is not
associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the
page_pool running mt76_dma_cleanup routine during module unload.
Moreover returns pages to the page pool if WED is not enabled for WED RRO
queues. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req()
mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to
be freed eventually by mt76_mcu_skb_send_msg(). However, currently if
an intermediate function fails before sending, the allocated skb is
leaked.
Specifically, mt76_connac_mcu_sta_wed_update() and
mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory
leak in the error path.
Fix this by explicitly freeing the skb in these error paths.
Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on
mt7996_mcu_sta_key_tlv error") made a similar change.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ch341: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the controller and driver data lifetime so that they are released
on driver unbind.
Note that this also makes sure that the SPI controller is placed
correctly under the USB interface in the device tree. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: kvm: fix vector context allocation leak
When the second kzalloc (host_context.vector.datap) fails in
kvm_riscv_vcpu_alloc_vector_context, the first allocation
(guest_context.vector.datap) is leaked. Free it before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:ssif: Clean up kthread on errors
If an error occurs after the ssif kthread is created, but before the
main IPMI code starts the ssif interface, the ssif kthread will not
be stopped.
So make sure the kthread is stopped on an error condition if it is
running. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fix memory leaks in gfs2_fill_super error path
Fix two memory leaks in the gfs2_fill_super() error handling path when
transitioning a filesystem to read-write mode fails.
First leak: kthread objects (thread_struct, task_struct, etc.)
When gfs2_freeze_lock_shared() fails after init_threads() succeeds, the
created kernel threads (logd and quotad) are never destroyed. This
occurs because the fail_per_node label doesn't call
gfs2_destroy_threads().
Second leak: quota bitmap buffer (8192 bytes)
When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds but
before other operations complete, the allocated quota bitmap is never
freed.
The fix moves thread cleanup to the fail_per_node label to handle all
error paths uniformly. gfs2_destroy_threads() is safe to call
unconditionally as it checks for NULL pointers. Quota cleanup is added
in gfs2_make_fs_rw() to properly handle the withdrawal case where
quota initialization succeeds but the filesystem is then withdrawn.
Thread leak backtrace (gfs2_freeze_lock_shared failure):
unreferenced object 0xffff88801d7bca80 (size 4480):
copy_process+0x3a1/0x4670 kernel/fork.c:2422
kernel_clone+0xf3/0x6e0 kernel/fork.c:2779
kthread_create_on_node+0x100/0x150 kernel/kthread.c:478
init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611
gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265
Quota leak backtrace (gfs2_make_fs_rw failure):
unreferenced object 0xffff88812de7c000 (size 8192):
gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409
gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149
gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275 |
| In the Linux kernel, the following vulnerability has been resolved:
most: core: fix leak on early registration failure
A recent commit fixed a resource leak on early registration failures but
for some reason left out the first error path which still leaks the
resources associated with the interface.
Fix up also the first error path so that the interface is always
released on errors. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix extent map leak in NOCOW direct I/O write
btrfs_dio_iomap_begin() calls btrfs_get_extent(), which returns an
extent map reference that must be dropped on all exit paths.
For direct writes into a NOCOW range, btrfs_get_blocks_direct_write()
keeps using that extent map and asks btrfs_create_dio_extent() to
allocate the ordered extent. If that fails, for example because
btrfs_alloc_ordered_extent() fails, the function returns the error
without dropping the input extent map. The PREALLOC path avoided this by
dropping the input extent map before replacing it with the newly created
one.
Check the error from btrfs_create_dio_extent() before replacing the
map and drop the input extent map on failure. |
