| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
regcache: Do not overwrite error code when finalizing cache after error
During regcache initialization, if an error occurs in the
cache_ops->populate callback, and if cache operations include an exit
callback, the error code from populate() is overwritten with the return
value from exit(). This hides the error condition from the caller of
regcache_init(), and can cause NULL pointer dereferences when the regcache
is later accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: fix writes_pending and barrier reference leaks on write failures
raid1_make_request() acquires a writes_pending reference with
md_write_start() before calling raid1_write_request(). Several failure
paths in raid1_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid1_write_request() return a status indicating whether the write
request was successfully queued. This allows raid1_make_request() to
call md_write_end() when raid1_write_request() fails.
Additionally, if wait_blocked_rdev() fails after wait_barrier()
succeeds, the associated barrier reference is not released.
Call allow_barrier() before returning from that path to keep the barrier
accounting balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending leak on write request failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before dispatching write requests. Several failure
paths in raid10_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid10_write_request() return a status indicating whether the write
request was successfully queued. This allows raid10_make_request() to
release the writes_pending reference with md_write_end() when a write
request fails. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending and barrier reference leaks on discard failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return without calling
allow_barrier(), leaking the associated barrier reference.
Release the barrier before returning from those paths. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Guard conntrack opts error writes
The conntrack lookup and allocation kfuncs take an opts pointer
together with an opts__sz argument. The verifier checks only the memory
range described by opts__sz, but the wrappers unconditionally write
opts->error whenever the internal lookup or allocation helper returns an
error.
For an invalid size smaller than the end of opts->error, that write can
land outside the verifier-checked range. Keep returning NULL for invalid
arguments, but only report the error through opts->error when the
supplied size includes the field.
This preserves error reporting for the supported 12-byte and 16-byte
layouts, and for other invalid sizes that still include opts->error. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid R5_Overlap races while breaking stripe batches
KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()
on sh->dev[i].flags (plain word write vs. atomic bit op)..
and .. one possible scenario is:
CPU1 CPU2
break_stripe_batch_list(sh1)
-> handle sh2
-> lock(sh2)
-> sh2->batch_head = NULL
-> unlock(sh2)
-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)
-> wake_up_bit(sh2->dev[i].flags)
raid5_make_request()
-> add_all_stripe_bios(sh2)
-> lock(sh2)
-> stripe_bio_overlaps(sh2) returns true
batch_head is NULL, so new bio overlap
exist bio on sh2 -> true
-> set_bit(R5_Overlap, sh2->dev[i].flags)
-> unlock(sh2)
-> wait_on_bit(sh2->dev[i].flags)
-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap
No wait_up_bit(), CPU2 could be wait_on_bit() forever...
Fix by :
- Expand the protect zone.
- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.
- Move sh/head_sh->batch_head = NULL to the end of protected zone , and ,
any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:
- see batch_head != null, and , is rejected by stripe_bio_overlaps()
under the lock (no R5_Overlap wait ) , or ,
- sees batch_head == NULL, only after dev[i].flags has already been
set and the prior R5_Overlap waiters worken.
KCSAN report:
================================================
BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request
write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0:
raid5_make_request+0xea0/0x2930
md_handle_request+0x4a2/0xa40
md_submit_bio+0x109/0x1a0
__submit_bio+0x2ec/0x390
submit_bio_noacct_nocheck+0x457/0x710
submit_bio_noacct+0x2a7/0xc20
submit_bio+0x56/0x250
blkdev_direct_IO+0x54c/0xda0
blkdev_write_iter+0x38f/0x570
aio_write+0x22b/0x490
io_submit_one+0xa51/0xf70
__x64_sys_io_submit+0xf7/0x220
x64_sys_call+0x1907/0x1c60
do_syscall_64+0x130/0x570
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5:
break_stripe_batch_list+0x249/0x480
handle_stripe_clean_event+0x720/0x9b0
handle_stripe+0x32fb/0x4500
handle_active_stripes.isra.0+0x6e0/0xa50
raid5d+0x7e0/0xba0
md_thread+0x15a/0x2d0
kthread+0x1e3/0x220
ret_from_fork+0x37a/0x410
ret_from_fork_asm+0x1a/0x30
value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_compat: ebtables emulation must reject non-bridge targets
xtables targets return netfilter verdicts: NF_ACCEPT, NF_DROP, and so
on. ebtables targets return incompatible verdicts: EBT_ACCEPT,
EBT_DROP, ... We cannot allow fallback to NFPROTO_UNSPEC.
ebtables doesn't permit this since
11ff7288beb2 ("netfilter: ebtables: reject non-bridge targets")
but that commit missed the nft_compat layer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync
Yue Sun reported a use-after-free and debugobjects warning in
udp_tunnel_nic_device_sync_work() during concurrent device operations.
The workqueue core clears the internal pending bit before invoking the
worker. At that point, a concurrent thread can queue the work again.
When the already running worker eventually clears the work_pending flag
to 0, it mistakenly clears the flag for the newly queued instance.
udp_tunnel_nic_unregister() then observes work_pending as 0 and frees
the structure while the second work item is still active in the queue,
leading to UAF.
Fix this by returning early in udp_tunnel_nic_device_sync() if
work_pending is already set, preventing redundant work queueing. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy()
TIPC UDP media bearer teardown calls dst_cache_destroy() on its
replicast caches before calling synchronize_net() to wait for
concurrent RCU readers (transmitters) to finish:
static void cleanup_bearer(struct work_struct *work)
{
...
list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) {
dst_cache_destroy(&rcast->dst_cache);
list_del_rcu(&rcast->list);
kfree_rcu(rcast, rcu);
}
...
dst_cache_destroy(&ub->rcast.dst_cache);
udp_tunnel_sock_release(ub->sk);
synchronize_net();
...
}
This is highly buggy because dst_cache_destroy() immediately frees the
per-CPU cache memory (free_percpu()) and releases the cached dst
entries without any synchronization.
If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another
CPU under RCU protection, it can call dst_cache_get() concurrently,
leading to:
1. Use-After-Free on the per-CPU cache pointer itself (crash).
2. "rcuref - imbalanced put()" warning if it attempts to release a
dst that was concurrently released by dst_cache_destroy().
Furthermore, calling kfree(ub) immediately after synchronize_net() without
closing the socket first (or waiting after closing it) leaves a window
where a concurrent receiver (tipc_udp_recv()) could start after
synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs.
To fix this, we must defer dst_cache_destroy() and kfree(ub) until after
we have ensured that no more readers can see the bearer/socket and all
existing readers have finished:
1. Defer rcast entry destruction (both dst_cache_destroy() and kfree())
to an RCU callback using call_rcu_hurry().
Using call_rcu_hurry() ensures the dst entries are released quickly.
2. Release the bearer socket using udp_tunnel_sock_release() (stops
new receive readers).
3. Call synchronize_net() to wait for all outstanding RCU readers
(both transmit and receive) to finish.
4. Now that it is safe, call dst_cache_destroy() on the main bearer
cache, and free ub.
Note: 3) and 4) can be changed later in net-next to also use
call_rcu_hurry() and get rid of the synchronize_net() latency. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: add INIT verification after cookie unpacking
In SCTP handshake, the INIT chunk is initially processed by the server
and embedded into the cookie carried in INIT-ACK. The client then
returns this cookie via COOKIE-ECHO, where the server unpacks it and
reconstructs the original INIT chunk.
When cookie authentication is enabled, the cookie contents are protected
against tampering, so reusing the unpacked INIT without re-verification
is safe.
However, when cookie authentication is disabled, the reconstructed INIT
can no longer be trusted. In this case, the INIT must be explicitly
validated after unpacking to avoid processing potentially tampered data.
Add sctp_verify_init() checks after cookie unpacking in COOKIE-ECHO
processing paths (sctp_sf_do_5_1D_ce() and sctp_sf_do_5_2_4_dupcook())
when cookie_auth_enable is disabled. On failure, the new association is
freed and the packet is discarded.
Also tighten cookie validation in sctp_unpack_cookie() by verifying the
embedded chunk type is SCTP_CID_INIT before treating it as an INIT
chunk.
Finally, update sctp_verify_init() to validate parameter bounds using
the actual embedded INIT length instead of chunk->chunk_end, since the
INIT stored in COOKIE-ECHO may not span the entire chunk buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix addr_wq_timer race in sctp_free_addr_wq()
sctp_free_addr_wq() previously removed addr_wq_timer using timer_delete()
while holding addr_wq_lock. However, timer_delete() does not guarantee that
a currently running timer handler has completed.
This allows a race with sctp_addr_wq_timeout_handler(), where the handler
may still run after addr_waitq has been freed, acquire addr_wq_lock, and
access freed memory, leading to a use-after-free.
Fix this by calling timer_shutdown_sync() before taking addr_wq_lock. This
guarantees that any in-flight timer handler has finished and prevents the
timer from being re-armed during teardown, making subsequent cleanup safe. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject undersized DACLs before parsing ACEs
parse_dacl() limits the attacker-controlled ACE count by comparing it
with the number of minimal ACEs that fit in the DACL size. The DACL size
field is 16 bits, but the expression subtracts sizeof(struct smb_acl).
Because sizeof() is unsigned, a DACL size smaller than the ACL header
underflows to a large size_t.
A malicious client can reach this with:
SMB2_SET_INFO (InfoType=SMB2_O_INFO_SECURITY)
-> smb2_set_info_sec()
-> set_info_sec()
-> parse_sec_desc()
-> parse_dacl()
-> init_acl_state(..., 0xffff)
-> init_acl_state(..., 0xffff)
-> kmalloc_objs(..., 0xffff)
Thus a malformed security descriptor can make num_aces pass the guard
and drive large temporary ACL state and pointer-array allocations.
Reject DACLs smaller than struct smb_acl before doing the subtraction,
so the ACE count check cannot be bypassed by the underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/pvcalls: bound backend response req_id before indexing rsp[]
pvcalls_front_event_handler() takes req_id directly from the
backend-supplied ring response and uses it to index the fixed-size
bedata->rsp[] array for a memcpy() and a store, with no range check. A
malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING
and drive an out-of-bounds write past the bedata allocation.
req_id was also declared int while the wire field rsp->req_id is u32, so
a range check on the signed value alone is insufficient: a backend
req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING
test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single
bound covers both ends.
A backend that sends an out-of-range req_id has violated the wire
protocol, so rather than silently dropping the response, log once and
stop trusting the backend: set bedata->disabled. The event handler then
ignores further responses, and the request paths that wait for a
response return -EIO instead of blocking forever. This mirrors the
fatal-error handling xen-netback uses (xenvif_fatal_tx_err()).
The pvcalls frontend currently trusts its backend, so this is not a
classic-Xen security issue, but it matters for hardening PV frontends
against malicious backends (confidential and disaggregated deployments). |
| In the Linux kernel, the following vulnerability has been resolved:
fs: refuse O_TMPFILE creation with an unmapped fsuid or fsgid
vfs_tmpfile() never checked that the caller's fsuid and fsgid map into
the filesystem. On an idmapped mount whose idmapping does not cover the
caller's fs{u,g}id, the ->tmpfile() instance initializes the new inode
through inode_init_owner(), where mapped_fsuid()/mapped_fsgid() return
INVALID_UID/INVALID_GID, and the tmpfile ends up owned by (uid_t)-1.
Every other creation path already refuses this: may_o_create() (O_CREAT)
and may_create_dentry() (mkdir, mknod, symlink, link) bail out with
-EOVERFLOW via fsuidgid_has_mapping() precisely so that an object cannot
be created with an owner the filesystem cannot represent. An O_TMPFILE
is no exception: it is created I_LINKABLE and linkat(2) can splice it
into the namespace afterwards, so the same guarantee must hold.
Add the missing fsuidgid_has_mapping() check to vfs_tmpfile(). On a
non-idmapped mount the caller's fs{u,g}id always map in the superblock's
user namespace, so this is a no-op there and only takes effect on an
idmapped mount that does not map the caller. It applies to every
filesystem that sets FS_ALLOW_IDMAP and implements ->tmpfile() (tmpfs,
ext4, btrfs, xfs, f2fs, ...), and to overlayfs, whose upper-layer
tmpfile creation funnels through vfs_tmpfile() via backing_tmpfile_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix reinitialisation of the inode, in particular ->lock_work
It seems that initalising afs_vnode::lock_work a single time in the slab's
init function isn't sufficient for work_structs. This results in the
DEBUG_OBJECTS debugging stuff producing a warning occasionally when running
the generic/131 xfstest:
ODEBUG: activate not available (active state 0) object: 0000000016d8760f object type: work_struct hint: afs_lock_work+0x0/0x220
WARNING: lib/debugobjects.c:629 at debug_print_object+0x4b/0x90, CPU#3: locktest/7695
...
CPU: 3 UID: 0 PID: 7695 Comm: locktest Tainted: G S 7.1.0-build3+ #2771 PREEMPT
...
RIP: 0010:debug_print_object+0x65/0x90
...
Call Trace:
<TASK>
? __pfx_afs_lock_work+0x10/0x10
debug_object_activate+0x122/0x170
insert_work+0x25/0x60
__queue_work+0x2e0/0x340
queue_delayed_work_on+0x48/0x70
afs_fl_release_private+0x57/0x70
locks_release_private+0x5c/0xa0
locks_free_lock+0xe/0x20
posix_lock_inode+0x55f/0x5b0
locks_lock_inode_wait+0x81/0x140
? file_write_and_wait_range+0x50/0x70
afs_lock+0xcd/0x110
fcntl_setlk+0x10d/0x260
do_fcntl+0x24e/0x5b0
__do_sys_fcntl+0x6a/0x90
do_syscall_64+0x11e/0x310
entry_SYSCALL_64_after_hwframe+0x71/0x79
Fix this by reinitialising ->lock_work after allocating an inode.
Also, flush ->lock_work when the inode is being evicted to make sure it's
not still running. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix publication race for priv->channel_stats[]
mlx5e_channel_stats_alloc() publishes a new entry to
priv->channel_stats[] and then increments priv->stats_nch as a
publication token, but neither store carries any memory barrier:
priv->channel_stats[ix] = kvzalloc_node(...);
if (!priv->channel_stats[ix])
return -ENOMEM;
priv->stats_nch++;
Concurrent readers compute the loop bound from priv->stats_nch and
then dereference priv->channel_stats[i] using plain accesses, e.g.
for (i = 0; i < priv->stats_nch; i++) {
struct mlx5e_channel_stats *cs = priv->channel_stats[i];
... cs->rq.packets ...
}
On weakly-ordered architectures (ARM, PowerPC, RISC-V) the writes to
channel_stats[ix] and stats_nch may become visible to other CPUs out
of program order. A reader can observe stats_nch == N while still
seeing channel_stats[N-1] == NULL, leading to a NULL pointer
dereference in the channel_stats loop.
This has been observed in production on BlueField-3 DPUs (arm64),
where ovs-vswitchd queries netdev statistics over netlink during NIC
bringup, racing mlx5e_open_channel() -> mlx5e_channel_stats_alloc()
on another CPU:
Unable to handle kernel NULL pointer dereference at virtual address 0x840
Hardware name: BlueField-3 DPU
pc : mlx5e_fold_sw_stats64+0x30/0x180 [mlx5_core]
Call trace:
mlx5e_fold_sw_stats64+0x30/0x180 [mlx5_core]
dev_get_stats+0x50/0xc0
ovs_vport_get_stats+0x38/0xac [openvswitch]
ovs_vport_cmd_fill_info+0x194/0x290 [openvswitch]
ovs_vport_cmd_get+0xbc/0x10c [openvswitch]
genl_family_rcv_msg_doit+0xd0/0x160
genl_rcv_msg+0xec/0x1f0
netlink_rcv_skb+0x64/0x130
genl_rcv+0x40/0x60
netlink_unicast+0x2fc/0x370
netlink_sendmsg+0x1dc/0x454
...
__arm64_sys_sendmsg+0x2c/0x40
Add mlx5e_stats_nch_write() and mlx5e_stats_nch_read() helpers in en.h
that wrap the smp_store_release()/smp_load_acquire() pair on stats_nch.
The release/acquire pair establishes the contract:
stats_nch == N => channel_stats[0..N-1] are visible and non-NULL.
Publish the stats_nch increment via mlx5e_stats_nch_write() in the
writer (mlx5e_channel_stats_alloc()), and read stats_nch via
mlx5e_stats_nch_read() in all readers: mlx5e RX/TX queue stats,
mlx5e_get_base_stats(), ethtool channels stats, IPoIB stats, the
sw_stats fold and the HV VHCA stats agent. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
zdi-disclosures@trendmicro.com reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: avoid untracked enable work
lowpan_enable_set() allocates a temporary work item and schedules
do_enable_set() on system_wq, then returns to debugfs. The debugfs active
operation has ended at that point, but the worker still executes module
text and manipulates enable_6lowpan and listen_chan.
bt_6lowpan_exit() removes the debugfs files and immediately closes and
puts listen_chan. It has no pointer to the queued work item, so it cannot
cancel or flush it before tearing down the state that the worker uses.
The buggy scenario involves two paths, with each column showing the order
within that path:
debugfs enable write module exit
1. lowpan_enable_set() allocates 1. bt_6lowpan_exit() removes
set_enable work the debugfs file
2. schedule_work() queues 2. bt_6lowpan_exit() closes
do_enable_set() and puts listen_chan
3. the write operation returns 3. module teardown can continue
4. do_enable_set() later runs
against stale state
Run the enable state transition synchronously in lowpan_enable_set()
instead. The simple debugfs setter can sleep, and this file already handles
the 6LoWPAN control write synchronously under the same set_lock. Once the
setter returns, debugfs removal covers the whole operation and exit can no
longer race with an untracked work item.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in do_enable_set+0x113/0x2e0
Workqueue: events do_enable_set [bluetooth_6lowpan]
The buggy address belongs to the object at ffff888109cb8000 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: hold L2CAP conn across debugfs control
get_l2cap_conn() looks up an LE hci_conn under hdev protection, but
then drops that protection before reading hcon->l2cap_data and before
lowpan_control_write() later dereferences conn->hcon. A disconnect or
device close can tear down the same L2CAP connection in that window.
The buggy scenario involves two paths, with each column showing the order
within that path:
6LoWPAN control write: HCI disconnect/device close:
1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches
and hcon->l2cap_data. the L2CAP disconnect callback.
2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears
protection and returns conn. hcon->l2cap_data and drops the
L2CAP connection reference.
3. lowpan_control_write() reads 3. hci_conn_del() removes and drops
conn->hcon. the HCI connection.
Take a reference to the L2CAP connection with
l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that
reference after the debugfs command's last use of conn. This mirrors the
existing L2CAP ACL receive-side handoff and keeps the connection
dereferenceable after leaving hdev protection. Export the existing helper
so the bluetooth_6lowpan module can use the same lifetime primitive.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520
The buggy address belongs to the object at ffff888111b9d000 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of freed 1024-byte region
[ffff888111b9d000, ffff888111b9d400)
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__debugfs_file_get+0xf7/0x400
full_proxy_write+0x9e/0xd0
vfs_write+0x1b0/0x810
ksys_write+0xd2/0x170
dnotify_flush+0x32/0x220
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
l2cap_conn_add+0x45/0x520
l2cap_chan_connect+0xac6/0xd90
l2cap_sock_connect+0x216/0x350
__sys_connect+0x101/0x130
__x64_sys_connect+0x40/0x50
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
hci_conn_hash_flush+0xc0/0x140
hci_dev_close_sync+0x41a/0xb00
hci_dev_close+0x12f/0x160
hci_sock_ioctl+0x157/0x570
sock_do_ioctl+0xf7/0x210
sock_ioctl+0x32f/0x490
__x64_sys_ioctl+0xc7/0x110
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
kasan_record_aux_stack+0xa7/0xc0
insert_work+0x32/0x100
__queue_work+0x262/0xa60
queue_work_on+0xad/0xb0
l2cap_connect_cfm+0x4ef/0x670
hci_le_remote_feat_complete_evt+0x247/0x430
hci_event_packet+0x360/0x6f0
hci_rx_work+0x2ae/0x7a0
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net/liquidio: drop cached VF pci_dev LUT
The PF SR-IOV enable path caches VF pci_dev pointers in
dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those
entries do not own a reference, because the iterator drops the previous
device reference on each step. The cached pointer is then dereferenced
later when handling OCTEON_VF_FLR_REQUEST.
Replace the cached VF mapping with runtime lookup on the mailbox DPI
ring: derive the VF index from q_no, resolve the VF via exported PCI
IOV helpers, validate it with the PF pointer and VF ID, then issue
pcie_flr() and drop the reference with pci_dev_put(). Remove the
unused VF lookup table initialization and cleanup. |
