| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel through 6.9, an untrusted hypervisor can inject virtual interrupts 0 and 14 at any point in time and can trigger the SIGFPE signal handler in userspace applications. This affects AMD SEV-SNP and AMD SEV-ES. |
| In the Linux kernel before 6.9, an untrusted hypervisor can inject virtual interrupt 29 (#VC) at any point in time and can trigger its handler. This affects AMD SEV-SNP and AMD SEV-ES. |
| A flaw was found in PCP. The default pmproxy configuration exposes the Redis server backend to the local network, allowing remote command execution with the privileges of the Redis user. This issue can only be exploited when pmproxy is running. By default, pmproxy is not running and needs to be started manually. The pmproxy service is usually started from the 'Metrics settings' page of the Cockpit web interface. This flaw affects PCP versions 4.3.4 and newer. |
| The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail. An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail. |
| Improper input validation in XmlCli feature for UEFI firmware for some Intel(R) processors may allow privileged user to potentially enable escalation of privilege via local access. |
| The Libreswan Project was notified of an issue causing libreswan to restart under some IKEv2 retransmit scenarios when a connection is configured to use PreSharedKeys (authby=secret) and the connection cannot find a matching configured secret. When such a connection is automatically added on startup using the auto= keyword, it can cause repeated crashes leading to a Denial of Service. |
| Very large headers can cause resource exhaustion when parsing message. The message-parser normally reads reasonably sized chunks of the message. However, when it feeds them to message-header-parser, it starts building up "full_value" buffer out of the smaller chunks. The full_value buffer has no size limit, so large headers can cause large memory usage. It doesn't matter whether it's a single long header line, or a single header split into multiple lines. This bug exists in all Dovecot versions. Incoming mails typically have some size limits set by MTA, so even largest possible header size may still fit into Dovecot's vsz_limit. So attackers probably can't DoS a victim user this way. A user could APPEND larger mails though, allowing them to DoS themselves (although maybe cause some memory issues for the backend in general). One can implement restrictions on headers on MTA component preceding Dovecot. No publicly available exploits are known. |
| Having a large number of address headers (From, To, Cc, Bcc, etc.) becomes excessively CPU intensive. With 100k header lines CPU usage is already 12 seconds, and in a production environment we observed 500k header lines taking 18 minutes to parse. Since this can be triggered by external actors sending emails to a victim, this is a security issue. An external attacker can send specially crafted messages that consume target system resources and cause outage. One can implement restrictions on address headers on MTA component preceding Dovecot. No publicly available exploits are known. |
| A vulnerability in Node.js has been identified, allowing for a Denial of Service (DoS) attack through resource exhaustion when using the fetch() function to retrieve content from an untrusted URL.
The vulnerability stems from the fact that the fetch() function in Node.js always decodes Brotli, making it possible for an attacker to cause resource exhaustion when fetching content from an untrusted URL.
An attacker controlling the URL passed into fetch() can exploit this vulnerability to exhaust memory, potentially leading to process termination, depending on the system configuration. |
| A heap buffer overflow flaw was found in the DisableDevice function in the X.Org server. This issue may lead to an application crash or, in some circumstances, remote code execution in SSH X11 forwarding environments. |
| A flaw was found in X.Org server. In the XISendDeviceHierarchyEvent function, it is possible to exceed the allocated array length when certain new device IDs are added to the xXIHierarchyInfo struct. This can trigger a heap buffer overflow condition, which may lead to an application crash or remote code execution in SSH X11 forwarding environments. |
| Hardware logic with insecure de-synchronization in Intel(R) DSA and Intel(R) IAA for some Intel(R) 4th or 5th generation Xeon(R) processors may allow an authorized user to potentially enable escalation of privilege local access |
| Exposure of sensitive information caused by shared microarchitectural predictor state that influences transient execution for some Intel(R) Core™ processors (10th Generation) may allow an authenticated user to potentially enable information disclosure via local access. |
| If a server hosts a zone containing a "KEY" Resource Record, or a resolver DNSSEC-validates a "KEY" Resource Record from a DNSSEC-signed domain in cache, a client can exhaust resolver CPU resources by sending a stream of SIG(0) signed requests.
This issue affects BIND 9 versions 9.0.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.49-S1, and 9.18.11-S1 through 9.18.27-S1. |
| Resolver caches and authoritative zone databases that hold significant numbers of RRs for the same hostname (of any RTYPE) can suffer from degraded performance as content is being added or updated, and also when handling client queries for this name.
This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.11.4-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.27-S1. |
| EDK2 contains a vulnerability when S3 sleep is activated where an Attacker may cause a Division-By-Zero due to a UNIT32 overflow via local access. A successful exploit of this vulnerability may lead to a loss of Availability. |
| Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines()
method would not "pause" writing and signal to the Protocol to drain
the buffer to the wire once the write buffer reached the "high-water
mark". Because of this, Protocols would not periodically drain the write
buffer potentially leading to memory exhaustion.
This
vulnerability likely impacts a small number of users, you must be using
Python 3.12.0 or later, on macOS or Linux, using the asyncio module
with protocols, and using .writelines() method which had new
zero-copy-on-write behavior in Python 3.12.0 and later. If not all of
these factors are true then your usage of Python is unaffected. |
| An out-of-bounds read vulnerability was found in DPDK's Vhost library checksum offload feature. This issue enables an untrusted or compromised guest to crash the hypervisor's vSwitch by forging Virtio descriptors to cause out-of-bounds reads. This flaw allows an attacker with a malicious VM using a virtio driver to cause the vhost-user side to crash by sending a packet with a Tx checksum offload request and an invalid csum_start offset. |
| It is possible to construct a zone such that some queries to it will generate responses containing numerous records in the Additional section. An attacker sending many such queries can cause either the authoritative server itself or an independent resolver to use disproportionate resources processing the queries. Zones will usually need to have been deliberately crafted to attack this exposure.
This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, 9.11.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.32-S1. |
| mod_auth_openidc is an OpenID Certified authentication and authorization module for the Apache 2.x HTTP server that implements the OpenID Connect Relying Party functionality. Prior to 2.4.16.11, a bug in a mod_auth_openidc results in disclosure of protected content to unauthenticated users. The conditions for disclosure are an OIDCProviderAuthRequestMethod POST, a valid account, and there mustn't be any application-level gateway (or load balancer etc) protecting the server. When you request a protected resource, the response includes the HTTP status, the HTTP headers, the intended response (the self-submitting form), and the protected resource (with no headers). This is an example of a request for a protected resource, including all the data returned. In the case where mod_auth_openidc returns a form, it has to return OK from check_userid so as not to go down the error path in httpd. This means httpd will try to issue the protected resource. oidc_content_handler is called early, which has the opportunity to prevent the normal output being issued by httpd. oidc_content_handler has a number of checks for when it intervenes, but it doesn't check for this case, so the handler returns DECLINED. Consequently, httpd appends the protected content to the response. The issue has been patched in mod_auth_openidc versions >= 2.4.16.11. |
