| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper input validation in ANGLE in Google Chrome on on Mac prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Stack-based buffer overflow in Windows Internet Information Services allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: reject short monitor TX frames
In monitor mode, lbs_hard_start_xmit() casts skb->data to a
radiotap TX header, skips that header, and then copies the 802.11
destination address from offset 4 in the remaining frame. The
generic length check only rejects zero-length and oversized skbs, so
a short monitor frame can be read past the end of the skb data.
Require enough bytes for the radiotap TX header and the destination
address field before using the monitor-mode header layout. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: dev: zero-initialize struct rtc_wkalrm to prevent information leak
The struct rtc_wkalrm has padding holes after the 'pending' member.
When returned to userspace via the RTC_WKALRM_RD ioctl, uninitialized
kernel stack data residing in these holes may be leaked.
Zero-initialize the struct at declaration to eliminate this information
leak risk.
Fixes smatch warnings:
- drivers/rtc/dev.c:392 rtc_dev_ioctl() warn: check that 'alarm' doesn't
leak information (struct has a hole after 'pending') |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Build the cid tables privately and publish them with RCU
The cid tables are visible to the cid kfuncs while being modified: the
first enable publishes the global pointers before filling them,
ops.init_cids() overrides rewrite them in place, and re-enables rebuild
them in place. A racing TRACING or SYSCALL program can read unfilled
entries, including uninitialized memory in the kmalloc'd tables, or torn
topo updates.
Tie the tables' lifetimes to the root sched instead: each root enable
builds a fresh set privately and publishes the per-table __rcu globals once
the layout is final, and root disable unpublishes and RCU-frees the set. A
non-NULL global is now always a fully built table which stays valid for the
reader's RCU read section, and lookups stay two loads. Kfuncs treat NULL as
no-mapping, also after the scheduler exits instead of reporting the stale
last mapping.
The cid kfuncs are available whether the root scheduler is cid-form or
cpu-form, the latter to allow gradual migration to cids. Every root
therefore builds and publishes a default mapping.
Every reader must either be gated on scheduler liveness or NULL-check
inside an RCU read section. Fix the two kfuncs that were neither:
scx_bpf_this_cid() read the table with no RCU or preemption protection and
scx_bpf_task_cid() relied on KF_RCU, which doesn't put a sleepable program
in an RCU read section. The hotplug callbacks are instead serialized by
retiring the tables inside the cpus_read_lock() section that clears
scx_root.
v2: Document why every root builds the tables (desc + cid.c comment). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2
pkvm_init_features_from_host() takes KVM_ARCH_FLAG_GUEST_HAS_SVE and
KVM_ARM_VCPU_SVE from the host separately, but pkvm_vcpu_init_sve()
tests the bit while vcpu_has_sve() reads the flag. A host that sets the
flag without the bit gets a vCPU with a NULL sve_state that the world
switch loads the guest's SVE state from.
Derive the flag from the bit, and drop the protected path's copy of the
host's flag, which is dead code since protected VMs are not allowed SVE. |
| Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB contains a spreadsheet formula injection vulnerability in the part import/export workflow. An authenticated user with permission to import parts can import a CSV file containing formula-prefixed values, such as =1+1, into user-controlled part fields. When the affected part is later exported as an XLSX spreadsheet, Part-DB writes the attacker-controlled value using PhpSpreadsheet's setCellValue() method without neutralising spreadsheet formula characters. As a result, the exported XLSX file contains an executable spreadsheet formula cell rather than a plain text value. If another user exports and opens the spreadsheet, the formula may be evaluated by their spreadsheet software. This issue has been patched in version 2.13.2. |
| In Splunk SOAR versions below 8.7.0, a user that holds a role with the Users and Roles view permission could use the Representational State Transfer (REST) API to infer authentication token values for other users. If the inferred token grants administrative access, that user could gain administrative access to the Splunk SOAR instance.
The vulnerability is possible because the REST API accepts caller-controlled query filters on sensitive user record fields.
For more information see Using the REST API reference for Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/7.1.0/using-the-splunk-soar-rest-api/using-the-rest-api-reference-for-splunk-soar-on-premises), Query for Data (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/7.1.0/using-the-splunk-soar-rest-api/query-for-data), and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/6.4.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation. |
| A flaw was found in libslirp. When handling ICMP echo requests, the reply length is not updated to match the actual data received from the host. Under specific conditions where the normal ICMP socket is unavailable, this length mismatch causes the host's real IP address to be leaked to the guest in the echo reply, breaking the NAT isolation that user-mode networking is expected to provide. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/gntalloc: validate grant count before allocation
gntalloc_ioctl_alloc() allocates the grant-id array before checking
whether the requested count fits within the global grant limit. Counts
above that limit cannot succeed, so reject them before the
user-controlled allocation reaches kcalloc().
Use a subtraction-based check while holding gref_mutex so adding the
requested count cannot wrap. Also cast the count before advancing the
per-file index so the page-size multiplication is performed in 64-bit
arithmetic. |
| Backstage is an open framework for building developer portals. Prior to 4.1.0, the @backstage/plugin-scaffolder-backend package is affected by incorrect authorization in scaffolder task listing. An authenticated internal user may be able to view metadata for scaffolder tasks outside the visibility intended by a deployment's permission policy. Stored task secrets are not included in the affected response, and no integrity or availability impact was identified. This issue is fixed in version 4.1.0. |
| A flaw was found in evolution-data-server. Calendar events containing a file:// URI in their ATTACH property automatically read the targeted local file, base64-encode its contents and upload it back to the server when the event is saved. There are no file path restrictions or checks to verify whether the attachment originally came from the server or was added locally. This allows an attacker with access to a shared CalDAV calendar to exfiltrate arbitrary files the user has access to when interacting with malicious calendar events. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: handle set_blocksize failures
ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| When the http:// stream wrapper follows a redirect it forwards the user-supplied Authorization, Cookie and Proxy-Authorization headers unchanged, even when the redirect target is a different host, a different port, or a downgrade from HTTPS to HTTP. A server that can steer a redirect therefore receives credentials that were only meant for the original origin. This is the same class of issue that libcurl fixed in 7.58.0 ( CVE-2018-1000007 https://github.com/advisories/GHSA-g7x2-hrfp-pv5f ). |
| PraisonAI is a multi-agent teams system. From version 3.8.1 to before version 4.6.59, PraisonAI's Dynamic Context Discovery feature exposes artifact helper tools through ctx.get_tools(). The implemented artifact tools do not enforce that the supplied artifact_path is an artifact created by the configured store or that it lives under the configured artifact base directory. Instead, artifact_head, artifact_tail, artifact_grep, and artifact_chunk wrap the caller-supplied path directly into an ArtifactRef and then read it from the host filesystem. As a result, any prompt/user/tool-caller that can influence those tool arguments can read files readable by the PraisonAI process, such as project .env files, cloud credentials, SSH keys, source files, or other local data. This issue has been patched in version 4.6.59. |
| PraisonAI is a multi-agent teams system. From version 4.2.1 to before version 4.6.59, PraisonAI's AgentOS FastAPI deployment surface remains unauthenticated in current main and in releases after the published patched version for GHSA-pm96-6xpr-978x / CVE-2026-40151. The chat route directly calls agent.chat(request.message). No-auth and wrong-bearer requests both execute the deployed agent. This is broader than passive metadata disclosure. In any deployment where AgentOS wraps agents with tools, private context, memory, API integrations, or cost-bearing model calls, an unauthenticated reachable client can drive those agents. This issue has been patched in version 4.6.59. |
| PraisonAI is a multi-agent teams system. From version 4.5.115 to before version 4.6.61, the published A2U advisory GHSA-f292-66h9-fpmf says unauthenticated A2U event streaming was fixed in praisonai 4.5.115. Current head still exposes the same A2U subscription and event routes without authentication when the operator starts the documented CLI entrypoint. The current CLI wrapper does not expose --api-key, does not install the common API-key middleware, and does not generate a token for A2U. It calls create_a2u_routes(app) directly. That helper only enforces auth if A2U_AUTH_TOKEN is already present; if the variable is missing, _authenticate_request() returns None and treats auth as disabled. This issue has been patched in version 4.6.61. |
| Heimdall is a cloud native Identity Aware Proxy and Access Control Decision service. Prior to version 0.17.17, when Heimdall operates in proxy mode, it constructs the Forwarded HTTP header after executing the matched rule pipeline by inserting the incoming request's Host header value directly into the header string without sanitizing commas or semicolons. This allows an attacker to inject additional parameters into the Forwarded header, potentially spoofing IP addresses for upstream services. This issue has been patched in version 0.17.17. |
| Heimdall is a cloud native Identity Aware Proxy and Access Control Decision service. Prior to version 0.17.17, when the trusted_proxies option is configured, heimdall extracts client IP addresses from the Forwarded (for= parameter) and X-Forwarded-For headers and exposes them as Request.ClientIPAddresses to the rule pipeline. However, extracted values are not validated to be syntactically valid IP addresses. Arbitrary strings, malformed IP literals, and RFC 7239 unknown values and obfuscated identifiers are accepted without further checks. In addition, the Forwarded header parser splits on , and ; without accounting for RFC 7239 quoted strings, which can cause a single quoted value to be parsed as multiple entries, with fragments — including trailing quote characters — treated as independent addresses. This issue has been patched in version 0.17.17. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
