| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix truncate racing with PMD zapping
zap_huge_pmd_folio() removes the rmap before calling folio_mark_dirty().
If this was the last mapping, truncation can skip unmapping the folio
and proceed without waiting for the PMD lock, racing with dirtying.
ifs_set_range_dirty() can oops if MADV_DONTNEED races with
ftruncate() on XFS, when we get the folio set dirty after it was found
to not be mapped anymore.
Move folio_mark_dirty() and folio_mark_accessed() before rmap removal,
matching the PTE zap path. This keeps the folio mapped while updating
its state, so truncation must wait for the page table lock.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify comment and description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix zapping migration entries for device-private THPs
A PMD migration entry can refer to a device-private folio.
zap_huge_pmd_folio() checks the folio type instead of the entry type,
so it treats such a migration entry as a device-private entry.
Installing the migration entry already removed the reverse mapping and
dropped the mapping reference. Zapping it must not repeat those
operations. Concurrent MADV_DONTNEED during migration back to system
memory can trigger this.
Check the PMD entry type using pmd_is_device_private_entry().
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: recheck the PUD under PTL in follow_pud_mask()
follow_pud_mask() reads the PUD without a lock. If it is a leaf, it takes
the lock and calls follow_huge_pud(), which reads the entry again, but
only tests whether it is present.
A leaf can be zapped concurrently and a page fault can fill the empty
entry with a page table.
This currently only applies when device-dax makes use of PUD entries,
and the fault after e.g., MADV_DONTNEED would find THPs to be disabled.
That requires a sequence like
1) Fault in the PUD
2) Disable THP
3) Have GUP race against concurrent MADV_DONTNEED + refault
Which is rather unlikely to happen in practice, which is why we never
received a report about such a problem.
Before commit 1b1676180246 ("mm/gup: handle huge pud for
follow_pud_mask()"), we performed that check in follow_devmap_pud() by
testing for pud_devmap().
Let's fix it by just structuring follow_pud_mask() similar to
follow_pmd_mask(), minus protnone stuff that does not apply and minus
FOLL_SPLIT_PMD handling. That makes it much easier to spot any such
inconsistencies.
Perform the pud_bad() check early in follow_pmd_mask() and just forward
the PUD value. We can drop the pud_present() check in follow_huge_pud(),
just like we have in follow_huge_pmd().
Even though we are performing more changes than strictly necessary, the
fix should be easy to backport. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: fix clearing folios in memfd_pin_folios()
memfd_pin_folios() pins folios obtained directly from the page cache
without checking whether they are uptodate. However, shmem fallocate()
can leave newly allocated folios uncleared and not uptodate. Callers
such as udmabuf can then expose uninitialized memory to userspace.
Clear non-uptodate folios and mark them uptodate under the folio lock
before returning them to the caller.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify description and comment ] |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: Validate the queue state under the queue lock in the address attribute
Reading the "address" sysfs attribute calls kernel_getsockname() on the
admin queue socket, which can race with the queue teardown during
connection error recovery: a reader can observe NVME_TCP_Q_LIVE set,
then block on the queue lock while nvme_tcp_free_queue() releases the
socket and clears queue->sock without holding the lock. Once the
reader acquires the lock it dereferences the NULL socket pointer.
Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during
error recovery") had the queue liveness check inside the lock.
Commit 782373ba2766 ("nvme: tcp: avoid race between queue_lock lock
and destroy") moved it back out because the lock itself is destroyed
in nvme_tcp_free_queue(), so a reader arriving late trips
mutex_destroy().
Check the queue liveness inside the queue lock, and clear queue->sock
under the same lock. The teardown clears NVME_TCP_Q_LIVE under the
lock well before the socket is released, so a reader either sees the
bit cleared or a socket that cannot be released while it holds the
lock. To also close the lock lifetime race, the queue locks are now
owned by the controller: they are initialized with the queue array and
only destroyed when the controller is freed, which cannot happen while
a sysfs attribute read is still in progress. The queue count is
computed by the NVME_TCP_OPT_NR_QUEUES() macro from the original
connect options for both initialization and destruction, as reconnects
may shrink ctrl->queue_count. |
| A security vulnerability has been detected in XiangLi1999 Diffusion-LM up to 759889d58ef38e2eed41a8c34db8032e072826f4. This issue affects the function main of the file improved-diffusion/scripts/text_sample.py. Such manipulation of the argument out_dir leads to path traversal. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| A weakness has been identified in XiangLi1999 Diffusion-LM up to 759889d58ef38e2eed41a8c34db8032e072826f4. This vulnerability affects the function os.system of the file improved-diffusion/scripts/infill.py. This manipulation of the argument notes causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in ninenines cowlib allows unauthenticated remote denial of service via memory exhaustion.
cow_spdy:inflate/2 in cowlib passes peer-supplied compressed bytes directly to zlib:inflate/2 with no output size bound. The SPDY header compression dictionary (?ZDICT) is public, and zlib compresses long runs of repeated bytes at roughly 1024:1, so a few kilobytes of SPDY frame payload can decompress to gigabytes on the BEAM heap, OOM-killing the node. A single unauthenticated SPDY frame is sufficient to trigger the condition. The parsers for syn_stream, syn_reply, and headers frame types are all affected via cow_spdy:parse_headers/2.
This issue affects cowlib: from 0.1.0 before 2.16.1. |
| Allocation of Resources Without Limits or Throttling vulnerability in ninenines cowboy allows denial of service via unbounded buffer accumulation in multipart header parsing.
cowboy_req:read_part/3 in src/cowboy_req.erl accumulates incoming request bytes into a Buffer binary with no upper-bound check. When cow_multipart:parse_headers/2 returns more or {more, Buffer2}, the function reads up to Length bytes (default 64 KB) from the request body and recurses with the enlarged buffer. There is no equivalent of the byte_size(Acc) > Length guard present in the sibling function read_part_body/4. An unauthenticated attacker can send a multipart/form-data request whose body never yields a complete header section — for example, a body that never contains the advertised boundary delimiter, or one whose header lines never contain \r\n\r\n — and force the server process to accumulate memory linearly with the bytes the protocol layer is willing to deliver. A handful of concurrent such uploads is sufficient to exhaust BEAM memory.
The function has had two names. From 0.10.0 to 2.0.0-pre.3 it is cowboy_req:part/3, reached through cowboy_req:part/1 and cowboy_req:part/2. From 2.0.0-pre.4 it is cowboy_req:read_part/3, reached through cowboy_req:read_part/1 and cowboy_req:read_part/2. Both have the same buffer loop.
This issue affects cowboy: from 0.10.0 before 2.15.0. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: reject unhashed sockets during established lookups
TCP established ehash lookups are lockless. The socket caches involved
use SLAB_TYPESAFE_BY_RCU, so memory can be reused before an RCU reader
that retained its old address has finished.
After a tuple match, __inet_lookup_established() and
__inet6_lookup_established() acquire a reference and repeat the tuple
check. They do not check whether the new object is hashed. If the
address is reused for a socket with the same tuple, the lookup can
acquire a reference to the new object and return it while its nulls node
is unhashed.
A PoC that drives reuse with a SYN cookie request socket reproduced the
crash. The new request socket is unhashed and has a NULL rsk_listener.
A lookup that had loaded the address of the old request socket acquired
the reference published by tcp_get_cookie_sock() and returned the new
object. tcp_v4_rcv() then read sk_state through the NULL listener.
The resulting crash was:
BUG: kernel NULL pointer dereference, address: 0000000000000012
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 7.3.0-00591-g0e135910deec #1 PREEMPT(lazy)
...
RIP: 0010:tcp_v4_rcv+0x44e/0x1280
...
R10: 0000000000000001 R11: 00000000024ca8c0 R12: 0000000000000000
...
CR2: 0000000000000012 CR3: 0000000103d50004 CR4: 0000000000770ef0
...
Call Trace:
<IRQ>
? raw_local_deliver+0xae/0x240
ip_protocol_deliver_rcu+0x2d/0x180
ip_local_deliver_finish+0x84/0x100
ip_sublist_rcv_finish+0x5f/0x70
ip_sublist_rcv+0x12a/0x1d0
ip_list_rcv+0xfd/0x130
__netif_receive_skb_list_core+0x223/0x250
netif_receive_skb_list_internal+0x1d2/0x2c0
? try_fill_recv+0x39/0x7b0
napi_complete_done+0x74/0x170
virtnet_poll+0x445/0x600
__napi_poll+0x27/0x1e0
net_rx_action+0x2fe/0x3b0
handle_softirqs+0xc2/0x2c0
__irq_exit_rcu+0x74/0xd0
common_interrupt+0x7f/0x90
</IRQ>
...
Kernel panic - not syncing: Fatal exception in interrupt
After taking a reference, check whether the nulls node is unhashed in
both IPv4 and IPv6 established lookups. If it is unhashed or the tuple
no longer matches, drop the reference and restart the lookup.
Lookups racing with the TIME_WAIT hashdance, or with a request being
replaced by its child, now restart and find the new socket instead of
returning the old one.
Request sockets that were never inserted into ehash can have a nonzero
refcount, and a stale lookup can hold a transient reference. Therefore,
when SYN cookie, Fast Open, and request migration paths fail after
setting a nonzero refcount, release the references held by those paths
with reqsk_put() instead of freeing the request directly. |
| In JetBrains Rider before 2026.3 code execution was possible via MSBuild configuration files in parent directories |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 remote code execution was possible via Git submodule URLs |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 remote code execution was possible via FreeMarker notification templates |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 remote code execution was possible via a time zone callback in the Kotlin DSL sandbox |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 remote code execution was possible via a URL stream handler in the Kotlin DSL sandbox |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 remote code execution was possible via Git VCS root URLs |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 remote code execution was possible via Maven repository settings |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 remote code execution was possible via Maven dependencies of Kotlin DSL settings |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 remote code execution was possible via security context spoofing in the Kotlin DSL sandbox |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 remote code execution was possible via local repository URLs in Subversion VCS roots |