| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic-spisg: Fix memory leak in aml_spisg_probe()
In aml_spisg_probe(), ctlr is allocated by
spi_alloc_target()/spi_alloc_host(), but fails to call
spi_controller_put() in several error paths. This leads
to a memory leak whenever the driver fails to probe after
the initial allocation.
Convert to use devm_spi_alloc_host()/devm_spi_alloc_target()
to fix the memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Fix use-after-free in mshv_map_user_memory error path
In the error path of mshv_map_user_memory(), calling vfree() directly on
the region leaves the MMU notifier registered. When userspace later unmaps
the memory, the notifier fires and accesses the freed region, causing a
use-after-free and potential kernel panic.
Replace vfree() with mshv_partition_put() to properly unregister
the MMU notifier before freeing the region. |
| In the Linux kernel, the following vulnerability has been resolved:
arm_mpam: Fix null pointer dereference when restoring bandwidth counters
When an MSC supporting memory bandwidth monitoring is brought offline and
then online, mpam_restore_mbwu_state() calls __ris_msmon_read() via ipi to
restore the configuration of the bandwidth counters. It doesn't care about
the value read, mbwu_arg.val, and doesn't set it leading to a null pointer
dereference when __ris_msmon_read() adds to it. This results in a kernel
oops with a call trace such as:
Call trace:
__ris_msmon_read+0x19c/0x64c (P)
mpam_restore_mbwu_state+0xa0/0xe8
smp_call_on_cpu_callback+0x1c/0x38
process_one_work+0x154/0x4b4
worker_thread+0x188/0x310
kthread+0x11c/0x130
ret_from_fork+0x10/0x20
Provide a local variable for val to avoid __ris_msmon_read() dereferencing
a null pointer when adding to val. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Move event pointer setup earlier in x86_pmu_enable()
A production AMD EPYC system crashed with a NULL pointer dereference
in the PMU NMI handler:
BUG: kernel NULL pointer dereference, address: 0000000000000198
RIP: x86_perf_event_update+0xc/0xa0
Call Trace:
<NMI>
amd_pmu_v2_handle_irq+0x1a6/0x390
perf_event_nmi_handler+0x24/0x40
The faulting instruction is `cmpq $0x0, 0x198(%rdi)` with RDI=0,
corresponding to the `if (unlikely(!hwc->event_base))` check in
x86_perf_event_update() where hwc = &event->hw and event is NULL.
drgn inspection of the vmcore on CPU 106 showed a mismatch between
cpuc->active_mask and cpuc->events[]:
active_mask: 0x1e (bits 1, 2, 3, 4)
events[1]: 0xff1100136cbd4f38 (valid)
events[2]: 0x0 (NULL, but active_mask bit 2 set)
events[3]: 0xff1100076fd2cf38 (valid)
events[4]: 0xff1100079e990a90 (valid)
The event that should occupy events[2] was found in event_list[2]
with hw.idx=2 and hw.state=0x0, confirming x86_pmu_start() had run
(which clears hw.state and sets active_mask) but events[2] was
never populated.
Another event (event_list[0]) had hw.state=0x7 (STOPPED|UPTODATE|ARCH),
showing it was stopped when the PMU rescheduled events, confirming the
throttle-then-reschedule sequence occurred.
The root cause is commit 7e772a93eb61 ("perf/x86: Fix NULL event access
and potential PEBS record loss") which moved the cpuc->events[idx]
assignment out of x86_pmu_start() and into step 2 of x86_pmu_enable(),
after the PERF_HES_ARCH check. This broke any path that calls
pmu->start() without going through x86_pmu_enable() -- specifically
the unthrottle path:
perf_adjust_freq_unthr_events()
-> perf_event_unthrottle_group()
-> perf_event_unthrottle()
-> event->pmu->start(event, 0)
-> x86_pmu_start() // sets active_mask but not events[]
The race sequence is:
1. A group of perf events overflows, triggering group throttle via
perf_event_throttle_group(). All events are stopped: active_mask
bits cleared, events[] preserved (x86_pmu_stop no longer clears
events[] after commit 7e772a93eb61).
2. While still throttled (PERF_HES_STOPPED), x86_pmu_enable() runs
due to other scheduling activity. Stopped events that need to
move counters get PERF_HES_ARCH set and events[old_idx] cleared.
In step 2 of x86_pmu_enable(), PERF_HES_ARCH causes these events
to be skipped -- events[new_idx] is never set.
3. The timer tick unthrottles the group via pmu->start(). Since
commit 7e772a93eb61 removed the events[] assignment from
x86_pmu_start(), active_mask[new_idx] is set but events[new_idx]
remains NULL.
4. A PMC overflow NMI fires. The handler iterates active counters,
finds active_mask[2] set, reads events[2] which is NULL, and
crashes dereferencing it.
Move the cpuc->events[hwc->idx] assignment in x86_pmu_enable() to
before the PERF_HES_ARCH check, so that events[] is populated even
for events that are not immediately started. This ensures the
unthrottle path via pmu->start() always finds a valid event pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix NULL pointer dereference in netfs_unbuffered_write() on retry
When a write subrequest is marked NETFS_SREQ_NEED_RETRY, the retry path
in netfs_unbuffered_write() unconditionally calls stream->prepare_write()
without checking if it is NULL.
Filesystems such as 9P do not set the prepare_write operation, so
stream->prepare_write remains NULL. When get_user_pages() fails with
-EFAULT and the subrequest is flagged for retry, this results in a NULL
pointer dereference at fs/netfs/direct_write.c:189.
Fix this by mirroring the pattern already used in write_retry.c: if
stream->prepare_write is NULL, skip renegotiation and directly reissue
the subrequest via netfs_reissue_write(), which handles iterator reset,
IN_PROGRESS flag, stats update and reissue internally. |
| Encrypted values in Fortra's GoAnywhere MFT prior to version 7.10.0 and GoAnywhere Agents prior to version 2.2.0 utilize a static IV which allows admin users to brute-force decryption of data. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: free driver_data after destroying hid device
HID driver callbacks aren't called anymore once hid_destroy_device() has
been called. Hence, hid driver_data should be freed only after the
hid_destroy_device() function returned as driver_data is used in several
callbacks.
I observed a crash with kernel 6.10.0 on my T14s Gen 3, after enabling
KASAN to debug memory allocation, I got this output:
[ 13.050438] ==================================================================
[ 13.054060] BUG: KASAN: slab-use-after-free in amd_sfh_get_report+0x3ec/0x530 [amd_sfh]
[ 13.054809] psmouse serio1: trackpoint: Synaptics TrackPoint firmware: 0x02, buttons: 3/3
[ 13.056432] Read of size 8 at addr ffff88813152f408 by task (udev-worker)/479
[ 13.060970] CPU: 5 PID: 479 Comm: (udev-worker) Not tainted 6.10.0-arch1-2 #1 893bb55d7f0073f25c46adbb49eb3785fefd74b0
[ 13.063978] Hardware name: LENOVO 21CQCTO1WW/21CQCTO1WW, BIOS R22ET70W (1.40 ) 03/21/2024
[ 13.067860] Call Trace:
[ 13.069383] input: TPPS/2 Synaptics TrackPoint as /devices/platform/i8042/serio1/input/input8
[ 13.071486] <TASK>
[ 13.071492] dump_stack_lvl+0x5d/0x80
[ 13.074870] snd_hda_intel 0000:33:00.6: enabling device (0000 -> 0002)
[ 13.078296] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.082199] print_report+0x174/0x505
[ 13.085776] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 13.089367] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.093255] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.097464] kasan_report+0xc8/0x150
[ 13.101461] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.105802] amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.110303] amdtp_hid_request+0xb8/0x110 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.114879] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.119450] sensor_hub_get_feature+0x1d3/0x540 [hid_sensor_hub 3f13be3016ff415bea03008d45d99da837ee3082]
[ 13.124097] hid_sensor_parse_common_attributes+0x4d0/0xad0 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5]
[ 13.127404] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.131925] ? __pfx_hid_sensor_parse_common_attributes+0x10/0x10 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5]
[ 13.136455] ? _raw_spin_lock_irqsave+0x96/0xf0
[ 13.140197] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 13.143602] ? devm_iio_device_alloc+0x34/0x50 [industrialio 3d261d5e5765625d2b052be40e526d62b1d2123b]
[ 13.147234] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.150446] ? __devm_add_action+0x167/0x1d0
[ 13.155061] hid_gyro_3d_probe+0x120/0x7f0 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172]
[ 13.158581] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.161814] platform_probe+0xa2/0x150
[ 13.165029] really_probe+0x1e3/0x8a0
[ 13.168243] __driver_probe_device+0x18c/0x370
[ 13.171500] driver_probe_device+0x4a/0x120
[ 13.175000] __driver_attach+0x190/0x4a0
[ 13.178521] ? __pfx___driver_attach+0x10/0x10
[ 13.181771] bus_for_each_dev+0x106/0x180
[ 13.185033] ? __pfx__raw_spin_lock+0x10/0x10
[ 13.188229] ? __pfx_bus_for_each_dev+0x10/0x10
[ 13.191446] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.194382] bus_add_driver+0x29e/0x4d0
[ 13.197328] driver_register+0x1a5/0x360
[ 13.200283] ? __pfx_hid_gyro_3d_platform_driver_init+0x10/0x10 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172]
[ 13.203362] do_one_initcall+0xa7/0x380
[ 13.206432] ? __pfx_do_one_initcall+0x10/0x10
[ 13.210175] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.213211] ? kasan_unpoison+0x44/0x70
[ 13.216688] do_init_module+0x238/0x750
[ 13.2196
---truncated--- |
| fs/splice.c in the splice subsystem in the Linux kernel before 2.6.22.2 does not properly handle a failure of the add_to_page_cache_lru function, and subsequently attempts to unlock a page that was not locked, which allows local users to cause a denial of service (kernel BUG and system crash), as demonstrated by the fio I/O tool. |
| The key serial number collision avoidance code in the key_alloc_serial function in Linux kernel 2.6.9 up to 2.6.20 allows local users to cause a denial of service (crash) via vectors that trigger a null dereference, as originally reported as "spinlock CPU recursion." |
| The dev_queue_xmit function in Linux kernel 2.6 can fail before calling the local_bh_disable function, which could lead to data corruption and "node lockups." NOTE: it is not clear whether this issue is exploitable. |
| A typo in Linux kernel 2.6 before 2.6.21-rc6 and 2.4 before 2.4.35 causes RTA_MAX to be used as an array size instead of RTN_MAX, which leads to an "out of bound access" by the (1) dn_fib_props (dn_fib.c, DECNet) and (2) fib_props (fib_semantics.c, IPv4) functions. |
| The sctp_auth_ep_set_hmacs function in net/sctp/auth.c in the Stream Control Transmission Protocol (sctp) implementation in the Linux kernel before 2.6.26.4, when the SCTP-AUTH extension is enabled, does not verify that the identifier index is within the bounds established by SCTP_AUTH_HMAC_ID_MAX, which allows local users to obtain sensitive information via a crafted SCTP_HMAC_IDENT IOCTL request involving the sctp_getsockopt function, a different vulnerability than CVE-2008-4113. |
| The netlink subsystem in the Linux kernel 2.4.x before 2.4.37.6 and 2.6.x before 2.6.13-rc1 does not initialize certain padding fields in structures, which might allow local users to obtain sensitive information from kernel memory via unspecified vectors, related to the (1) tc_fill_qdisc, (2) tcf_fill_node, (3) neightbl_fill_info, (4) neightbl_fill_param_info, (5) neigh_fill_info, (6) rtnetlink_fill_ifinfo, (7) rtnetlink_fill_iwinfo, (8) vif_delete, (9) ipmr_destroy_unres, (10) ipmr_cache_alloc_unres, (11) ipmr_cache_resolve, (12) inet6_fill_ifinfo, (13) tca_get_fill, (14) tca_action_flush, (15) tcf_add_notify, (16) tc_dump_action, (17) cbq_dump_police, (18) __nlmsg_put, (19) __rta_fill, (20) __rta_reserve, (21) inet6_fill_prefix, (22) rsvp_dump, and (23) cbq_dump_ovl functions. |
| The perfmonctl system call (sys_perfmonctl) in Linux kernel 2.4.x and 2.6 before 2.6.18, when running on Itanium systems, does not properly track the reference count for file descriptors, which allows local users to cause a denial of service (file descriptor consumption). |
| ip6_tables in netfilter in the Linux kernel before 2.6.16.31 allows remote attackers to (1) bypass a rule that disallows a protocol, via a packet with the protocol header not located immediately after the fragment header, aka "ip6_tables protocol bypass bug;" and (2) bypass a rule that looks for a certain extension header, via a packet with an extension header outside the first fragment, aka "ip6_tables extension header bypass bug." |
| The __block_prepare_write function in fs/buffer.c for Linux kernel 2.6.x before 2.6.13 does not properly clear buffers during certain error conditions, which allows local users to read portions of files that have been unlinked. |
| The mincore function in the Linux kernel before 2.4.33.6 does not properly lock access to user space, which has unspecified impact and attack vectors, possibly related to a deadlock. |
| The nlmclnt_mark_reclaim in clntlock.c in NFS lockd in Linux kernel before 2.6.16 allows remote attackers to cause a denial of service (process crash) and deny access to NFS exports via unspecified vectors that trigger a kernel oops (null dereference) and a deadlock. |
| Linux kernel does not properly save or restore EFLAGS during a context switch, or reset the flags when creating new threads, which allows local users to cause a denial of service (process crash), as demonstrated using a process that sets the Alignment Check flag (EFLAGS 0x40000), which triggers a SIGBUS in other processes that have an unaligned access. |
| The copy_from_user function in the uaccess code in Linux kernel 2.6 before 2.6.19-rc1, when running on s390, does not properly clear a kernel buffer, which allows local user space programs to read portions of kernel memory by "appending to a file from a bad address," which triggers a fault that prevents the unused memory from being cleared in the kernel buffer. |