| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: kexec: Fix memory leak of elf header buffer
This is reported by kmemleak detector:
unreferenced object 0xff2000000403d000 (size 4096):
comm "kexec", pid 146, jiffies 4294900633 (age 64.792s)
hex dump (first 32 bytes):
7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 .ELF............
04 00 f3 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000566ca97c>] kmemleak_vmalloc+0x3c/0xbe
[<00000000979283d8>] __vmalloc_node_range+0x3ac/0x560
[<00000000b4b3712a>] __vmalloc_node+0x56/0x62
[<00000000854f75e2>] vzalloc+0x2c/0x34
[<00000000e9a00db9>] crash_prepare_elf64_headers+0x80/0x30c
[<0000000067e8bf48>] elf_kexec_load+0x3e8/0x4ec
[<0000000036548e09>] kexec_image_load_default+0x40/0x4c
[<0000000079fbe1b4>] sys_kexec_file_load+0x1c4/0x322
[<0000000040c62c03>] ret_from_syscall+0x0/0x2
In elf_kexec_load(), a buffer is allocated via vzalloc() to store elf
headers. While it's not freed back to system when kdump kernel is
reloaded or unloaded, or when image->elf_header is successfully set and
then fails to load kdump kernel for some reason. Fix it by freeing the
buffer in arch_kimage_file_post_load_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6/sit: use DEV_STATS_INC() to avoid data-races
syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error
concurrently.
This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit()
is not protected by a spinlock.
While original KCSAN report was about tx path, rx path has the same issue. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: smartpqi: Correct device removal for multi-actuator devices
Correct device count for multi-actuator drives which can cause kernel
panics. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix memory leak in ocfs2_mount_volume()
There is a memory leak reported by kmemleak:
unreferenced object 0xffff88810cc65e60 (size 32):
comm "mount.ocfs2", pid 23753, jiffies 4302528942 (age 34735.105s)
hex dump (first 32 bytes):
10 00 00 00 00 00 00 00 00 01 01 01 01 01 01 01 ................
01 01 01 01 01 01 01 01 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8170f73d>] __kmalloc+0x4d/0x150
[<ffffffffa0ac3f51>] ocfs2_compute_replay_slots+0x121/0x330 [ocfs2]
[<ffffffffa0b65165>] ocfs2_check_volume+0x485/0x900 [ocfs2]
[<ffffffffa0b68129>] ocfs2_mount_volume.isra.0+0x1e9/0x650 [ocfs2]
[<ffffffffa0b7160b>] ocfs2_fill_super+0xe0b/0x1740 [ocfs2]
[<ffffffff818e1fe2>] mount_bdev+0x312/0x400
[<ffffffff819a086d>] legacy_get_tree+0xed/0x1d0
[<ffffffff818de82d>] vfs_get_tree+0x7d/0x230
[<ffffffff81957f92>] path_mount+0xd62/0x1760
[<ffffffff81958a5a>] do_mount+0xca/0xe0
[<ffffffff81958d3c>] __x64_sys_mount+0x12c/0x1a0
[<ffffffff82f26f15>] do_syscall_64+0x35/0x80
[<ffffffff8300006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
This call stack is related to two problems. Firstly, the ocfs2 super uses
"replay_map" to trace online/offline slots, in order to recover offline
slots during recovery and mount. But when ocfs2_truncate_log_init()
returns an error in ocfs2_mount_volume(), the memory of "replay_map" will
not be freed in error handling path. Secondly, the memory of "replay_map"
will not be freed if d_make_root() returns an error in ocfs2_fill_super().
But the memory of "replay_map" will be freed normally when completing
recovery and mount in ocfs2_complete_mount_recovery().
Fix the first problem by adding error handling path to free "replay_map"
when ocfs2_truncate_log_init() fails. And fix the second problem by
calling ocfs2_free_replay_slots(osb) in the error handling path
"out_dismount". In addition, since ocfs2_free_replay_slots() is static,
it is necessary to remove its static attribute and declare it in header
file. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - fix DMA transfer direction
When CONFIG_DMA_API_DEBUG is selected, while running the crypto self
test on the QAT crypto algorithms, the function add_dma_entry() reports
a warning similar to the one below, saying that overlapping mappings
are not supported. This occurs in tests where the input and the output
scatter list point to the same buffers (i.e. two different scatter lists
which point to the same chunks of memory).
The logic that implements the mapping uses the flag DMA_BIDIRECTIONAL
for both the input and the output scatter lists which leads to
overlapped write mappings. These are not supported by the DMA layer.
Fix by specifying the correct DMA transfer directions when mapping
buffers. For in-place operations where the input scatter list
matches the output scatter list, buffers are mapped once with
DMA_BIDIRECTIONAL, otherwise input buffers are mapped using the flag
DMA_TO_DEVICE and output buffers are mapped with DMA_FROM_DEVICE.
Overlapping a read mapping with a write mapping is a valid case in
dma-coherent devices like QAT.
The function that frees and unmaps the buffers, qat_alg_free_bufl()
has been changed accordingly to the changes to the mapping function.
DMA-API: 4xxx 0000:06:00.0: cacheline tracking EEXIST, overlapping mappings aren't supported
WARNING: CPU: 53 PID: 4362 at kernel/dma/debug.c:570 add_dma_entry+0x1e9/0x270
...
Call Trace:
dma_map_page_attrs+0x82/0x2d0
? preempt_count_add+0x6a/0xa0
qat_alg_sgl_to_bufl+0x45b/0x990 [intel_qat]
qat_alg_aead_dec+0x71/0x250 [intel_qat]
crypto_aead_decrypt+0x3d/0x70
test_aead_vec_cfg+0x649/0x810
? number+0x310/0x3a0
? vsnprintf+0x2a3/0x550
? scnprintf+0x42/0x70
? valid_sg_divisions.constprop.0+0x86/0xa0
? test_aead_vec+0xdf/0x120
test_aead_vec+0xdf/0x120
alg_test_aead+0x185/0x400
alg_test+0x3d8/0x500
? crypto_acomp_scomp_free_ctx+0x30/0x30
? __schedule+0x32a/0x12a0
? ttwu_queue_wakelist+0xbf/0x110
? _raw_spin_unlock_irqrestore+0x23/0x40
? try_to_wake_up+0x83/0x570
? _raw_spin_unlock_irqrestore+0x23/0x40
? __set_cpus_allowed_ptr_locked+0xea/0x1b0
? crypto_acomp_scomp_free_ctx+0x30/0x30
cryptomgr_test+0x27/0x50
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
fortify: Fix __compiletime_strlen() under UBSAN_BOUNDS_LOCAL
With CONFIG_FORTIFY=y and CONFIG_UBSAN_LOCAL_BOUNDS=y enabled, we observe
a runtime panic while running Android's Compatibility Test Suite's (CTS)
android.hardware.input.cts.tests. This is stemming from a strlen()
call in hidinput_allocate().
__compiletime_strlen() is implemented in terms of __builtin_object_size(),
then does an array access to check for NUL-termination. A quirk of
__builtin_object_size() is that for strings whose values are runtime
dependent, __builtin_object_size(str, 1 or 0) returns the maximum size
of possible values when those sizes are determinable at compile time.
Example:
static const char *v = "FOO BAR";
static const char *y = "FOO BA";
unsigned long x (int z) {
// Returns 8, which is:
// max(__builtin_object_size(v, 1), __builtin_object_size(y, 1))
return __builtin_object_size(z ? v : y, 1);
}
So when FORTIFY_SOURCE is enabled, the current implementation of
__compiletime_strlen() will try to access beyond the end of y at runtime
using the size of v. Mixed with UBSAN_LOCAL_BOUNDS we get a fault.
hidinput_allocate() has a local C string whose value is control flow
dependent on a switch statement, so __builtin_object_size(str, 1)
evaluates to the maximum string length, making all other cases fault on
the last character check. hidinput_allocate() could be cleaned up to
avoid runtime calls to strlen() since the local variable can only have
literal values, so there's no benefit to trying to fortify the strlen
call site there.
Perform a __builtin_constant_p() check against index 0 earlier in the
macro to filter out the control-flow-dependant case. Add a KUnit test
for checking the expected behavioral characteristics of FORTIFY_SOURCE
internals. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
Running rcutorture with non-zero fqs_duration module parameter in a
kernel built with CONFIG_PREEMPTION=y results in the following splat:
BUG: using __this_cpu_read() in preemptible [00000000]
code: rcu_torture_fqs/398
caller is __this_cpu_preempt_check+0x13/0x20
CPU: 3 PID: 398 Comm: rcu_torture_fqs Not tainted 6.0.0-rc1-yoctodev-standard+
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x86
dump_stack+0x10/0x16
check_preemption_disabled+0xe5/0xf0
__this_cpu_preempt_check+0x13/0x20
rcu_force_quiescent_state.part.0+0x1c/0x170
rcu_force_quiescent_state+0x1e/0x30
rcu_torture_fqs+0xca/0x160
? rcu_torture_boost+0x430/0x430
kthread+0x192/0x1d0
? kthread_complete_and_exit+0x30/0x30
ret_from_fork+0x22/0x30
</TASK>
The problem is that rcu_force_quiescent_state() uses __this_cpu_read()
in preemptible code instead of the proper raw_cpu_read(). This commit
therefore changes __this_cpu_read() to raw_cpu_read(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bug_on in __es_tree_search caused by bad quota inode
We got a issue as fllows:
==================================================================
kernel BUG at fs/ext4/extents_status.c:202!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 810 Comm: mount Not tainted 6.1.0-rc1-next-g9631525255e3 #352
RIP: 0010:__es_tree_search.isra.0+0xb8/0xe0
RSP: 0018:ffffc90001227900 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000077512a0f RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000002a10 RDI: ffff8881004cd0c8
RBP: ffff888177512ac8 R08: 47ffffffffffffff R09: 0000000000000001
R10: 0000000000000001 R11: 00000000000679af R12: 0000000000002a10
R13: ffff888177512d88 R14: 0000000077512a10 R15: 0000000000000000
FS: 00007f4bd76dbc40(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005653bf993cf8 CR3: 000000017bfdf000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ext4_es_cache_extent+0xe2/0x210
ext4_cache_extents+0xd2/0x110
ext4_find_extent+0x5d5/0x8c0
ext4_ext_map_blocks+0x9c/0x1d30
ext4_map_blocks+0x431/0xa50
ext4_getblk+0x82/0x340
ext4_bread+0x14/0x110
ext4_quota_read+0xf0/0x180
v2_read_header+0x24/0x90
v2_check_quota_file+0x2f/0xa0
dquot_load_quota_sb+0x26c/0x760
dquot_load_quota_inode+0xa5/0x190
ext4_enable_quotas+0x14c/0x300
__ext4_fill_super+0x31cc/0x32c0
ext4_fill_super+0x115/0x2d0
get_tree_bdev+0x1d2/0x360
ext4_get_tree+0x19/0x30
vfs_get_tree+0x26/0xe0
path_mount+0x81d/0xfc0
do_mount+0x8d/0xc0
__x64_sys_mount+0xc0/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_orphan_cleanup
ext4_enable_quotas
ext4_quota_enable
ext4_iget --> get error inode <5>
ext4_ext_check_inode --> Wrong imode makes it escape inspection
make_bad_inode(inode) --> EXT4_BOOT_LOADER_INO set imode
dquot_load_quota_inode
vfs_setup_quota_inode --> check pass
dquot_load_quota_sb
v2_check_quota_file
v2_read_header
ext4_quota_read
ext4_bread
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_find_extent
ext4_cache_extents
ext4_es_cache_extent
__es_tree_search.isra.0
ext4_es_end --> Wrong extents trigger BUG_ON
In the above issue, s_usr_quota_inum is set to 5, but inode<5> contains
incorrect imode and disordered extents. Because 5 is EXT4_BOOT_LOADER_INO,
the ext4_ext_check_inode check in the ext4_iget function can be bypassed,
finally, the extents that are not checked trigger the BUG_ON in the
__es_tree_search function. To solve this issue, check whether the inode is
bad_inode in vfs_setup_quota_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
objtool: Fix SEGFAULT
find_insn() will return NULL in case of failure. Check insn in order
to avoid a kernel Oops for NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend
sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini,
driver unconditionally disables ecc_irq which is only enabled on
those asics enabling sdma ecc. This will introduce a warning in
suspend cycle on those chips with sdma ip v4.0, while without
sdma ecc. So this patch correct this.
[ 7283.166354] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu]
[ 7283.167001] RSP: 0018:ffff9a5fc3967d08 EFLAGS: 00010246
[ 7283.167019] RAX: ffff98d88afd3770 RBX: 0000000000000001 RCX: 0000000000000000
[ 7283.167023] RDX: 0000000000000000 RSI: ffff98d89da30390 RDI: ffff98d89da20000
[ 7283.167025] RBP: ffff98d89da20000 R08: 0000000000036838 R09: 0000000000000006
[ 7283.167028] R10: ffffd5764243c008 R11: 0000000000000000 R12: ffff98d89da30390
[ 7283.167030] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105
[ 7283.167032] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000
[ 7283.167036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7283.167039] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0
[ 7283.167041] Call Trace:
[ 7283.167046] <TASK>
[ 7283.167048] sdma_v4_0_hw_fini+0x38/0xa0 [amdgpu]
[ 7283.167704] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu]
[ 7283.168296] amdgpu_device_suspend+0x103/0x180 [amdgpu]
[ 7283.168875] amdgpu_pmops_freeze+0x21/0x60 [amdgpu]
[ 7283.169464] pci_pm_freeze+0x54/0xc0 |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work"
This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f.
This patch introduces a possible null-ptr-def problem. Revert it. And the
fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth:
btsdio: fix use after free bug in btsdio_remove due to race condition"). |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix blktrace debugfs entries leakage
Commit 99d055b4fd4b ("block: remove per-disk debugfs files in
blk_unregister_queue") moves blk_trace_shutdown() from
blk_release_queue() to blk_unregister_queue(), this is safe if blktrace
is created through sysfs, however, there is a regression in corner
case.
blktrace can still be enabled after del_gendisk() through ioctl if
the disk is opened before del_gendisk(), and if blktrace is not shutdown
through ioctl before closing the disk, debugfs entries will be leaked.
Fix this problem by shutdown blktrace in disk_release(), this is safe
because blk_trace_remove() is reentrant. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: sisusbvga: Add endpoint checks
The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver:
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95
RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003
R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600
FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline]
sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379
sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline]
sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline]
sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177
sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869
...
The problem was caused by the fact that the driver does not check
whether the endpoints it uses are actually present and have the
appropriate types. This can be fixed by adding a simple check of
the endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/msm: Add missing check and destroy for alloc_ordered_workqueue"
This reverts commit 643b7d0869cc7f1f7a5ac7ca6bd25d88f54e31d0.
A recent patch that tried to fix up the msm_drm_init() paths with
respect to the workqueue but only ended up making things worse:
First, the newly added calls to msm_drm_uninit() on early errors would
trigger NULL-pointer dereferences, for example, as the kms pointer would
not have been initialised. (Note that these paths were also modified by
a second broken error handling patch which in effect cancelled out this
part when merged.)
Second, the newly added allocation sanity check would still leak the
previously allocated drm device.
Instead of trying to salvage what was badly broken (and clearly not
tested), let's revert the bad commit so that clean and backportable
fixes can be added in its place.
Patchwork: https://patchwork.freedesktop.org/patch/525107/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: Fix load-tearing on sk->sk_stamp in sock_recv_cmsgs().
KCSAN found a data race in sock_recv_cmsgs() where the read access
to sk->sk_stamp needs READ_ONCE().
BUG: KCSAN: data-race in packet_recvmsg / packet_recvmsg
write (marked) to 0xffff88803c81f258 of 8 bytes by task 19171 on cpu 0:
sock_write_timestamp include/net/sock.h:2670 [inline]
sock_recv_cmsgs include/net/sock.h:2722 [inline]
packet_recvmsg+0xb97/0xd00 net/packet/af_packet.c:3489
sock_recvmsg_nosec net/socket.c:1019 [inline]
sock_recvmsg+0x11a/0x130 net/socket.c:1040
sock_read_iter+0x176/0x220 net/socket.c:1118
call_read_iter include/linux/fs.h:1845 [inline]
new_sync_read fs/read_write.c:389 [inline]
vfs_read+0x5e0/0x630 fs/read_write.c:470
ksys_read+0x163/0x1a0 fs/read_write.c:613
__do_sys_read fs/read_write.c:623 [inline]
__se_sys_read fs/read_write.c:621 [inline]
__x64_sys_read+0x41/0x50 fs/read_write.c:621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
read to 0xffff88803c81f258 of 8 bytes by task 19183 on cpu 1:
sock_recv_cmsgs include/net/sock.h:2721 [inline]
packet_recvmsg+0xb64/0xd00 net/packet/af_packet.c:3489
sock_recvmsg_nosec net/socket.c:1019 [inline]
sock_recvmsg+0x11a/0x130 net/socket.c:1040
sock_read_iter+0x176/0x220 net/socket.c:1118
call_read_iter include/linux/fs.h:1845 [inline]
new_sync_read fs/read_write.c:389 [inline]
vfs_read+0x5e0/0x630 fs/read_write.c:470
ksys_read+0x163/0x1a0 fs/read_write.c:613
__do_sys_read fs/read_write.c:623 [inline]
__se_sys_read fs/read_write.c:621 [inline]
__x64_sys_read+0x41/0x50 fs/read_write.c:621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
value changed: 0xffffffffc4653600 -> 0x0000000000000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19183 Comm: syz-executor.5 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id()
The "map_sz" is the number of elements in the "m" array so the >
comparison needs to be changed to >= to prevent an out of bounds
read. |
| In the Linux kernel, the following vulnerability has been resolved:
net/net_failover: fix txq exceeding warning
The failover txq is inited as 16 queues.
when a packet is transmitted from the failover device firstly,
the failover device will select the queue which is returned from
the primary device if the primary device is UP and running.
If the primary device txq is bigger than the default 16,
it can lead to the following warning:
eth0 selects TX queue 18, but real number of TX queues is 16
The warning backtrace is:
[ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1
[ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014
[ 32.147730] Call Trace:
[ 32.147971] <TASK>
[ 32.148183] dump_stack_lvl+0x48/0x70
[ 32.148514] dump_stack+0x10/0x20
[ 32.148820] netdev_core_pick_tx+0xb1/0xe0
[ 32.149180] __dev_queue_xmit+0x529/0xcf0
[ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0
[ 32.149967] ip_finish_output2+0x278/0x560
[ 32.150327] __ip_finish_output+0x1fe/0x2f0
[ 32.150690] ip_finish_output+0x2a/0xd0
[ 32.151032] ip_output+0x7a/0x110
[ 32.151337] ? __pfx_ip_finish_output+0x10/0x10
[ 32.151733] ip_local_out+0x5e/0x70
[ 32.152054] ip_send_skb+0x19/0x50
[ 32.152366] udp_send_skb.isra.0+0x163/0x3a0
[ 32.152736] udp_sendmsg+0xba8/0xec0
[ 32.153060] ? __folio_memcg_unlock+0x25/0x60
[ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10
[ 32.153854] ? sock_has_perm+0x85/0xa0
[ 32.154190] inet_sendmsg+0x6d/0x80
[ 32.154508] ? inet_sendmsg+0x6d/0x80
[ 32.154838] sock_sendmsg+0x62/0x70
[ 32.155152] ____sys_sendmsg+0x134/0x290
[ 32.155499] ___sys_sendmsg+0x81/0xc0
[ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0
[ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0
[ 32.156649] ? get_random_u16+0x69/0xf0
[ 32.156989] ? __fget_light+0xcf/0x110
[ 32.157326] __sys_sendmmsg+0xc4/0x210
[ 32.157657] ? __sys_connect+0xb7/0xe0
[ 32.157995] ? __audit_syscall_entry+0xce/0x140
[ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0
[ 32.158820] __x64_sys_sendmmsg+0x24/0x30
[ 32.159171] do_syscall_64+0x38/0x90
[ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fix that by reducing txq number as the non-existent primary-dev does. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: fsl-mc: Check return value of platform_get_resource()
platform_get_resource() returns NULL in case of failure, so check its
return value and propagate the error in order to prevent NULL pointer
dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
tee: fix register_shm_helper()
In register_shm_helper(), fix incorrect error handling for a call to
iov_iter_extract_pages(). A case is missing for when
iov_iter_extract_pages() only got some pages and return a number larger
than 0, but not the requested amount.
This fixes a possible NULL pointer dereference following a bad input from
ioctl(TEE_IOC_SHM_REGISTER) where parts of the buffer isn't mapped. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: check the return value of pinmux_ops::get_function_name()
While the API contract in docs doesn't specify it explicitly, the
generic implementation of the get_function_name() callback from struct
pinmux_ops - pinmux_generic_get_function_name() - can fail and return
NULL. This is already checked in pinmux_check_ops() so add a similar
check in pinmux_func_name_to_selector() instead of passing the returned
pointer right down to strcmp() where the NULL can get dereferenced. This
is normal operation when adding new pinfunctions. |
