| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL
An LWT_SEG6LOCAL program can invalidate its cached SRH with
bpf_lwt_seg6_adjust_srh() and then call bpf_skb_pull_data(). The latter
may reallocate skb->head, leaving the per-CPU SRH pointer dangling.
Post-program SRH validation then writes through that pointer.
Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL programs so the verifier
rejects this unsafe helper combination. Other LWT program types continue
to expose the helper through lwt_out_func_proto(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject dev-bound-only programs on other devices
__bpf_offload_dev_match() falls back to comparing offdev pointers after an
exact netdev mismatch. Bound-only programs normally have NULL offdevs, so
unrelated netdevs compare equal. A bound-only program on an
offload-registered netdev can instead inherit a real offdev and match a
sibling port. With CAP_BPF and CAP_NET_ADMIN, a caller can use
bpf(BPF_LINK_CREATE) with a different target ifindex to run metadata kfuncs
specialized for the bound driver on the target driver's xdp_buff. Running a
veth-bound program on tun reads beyond tun's bare stack xdp_buff as a
veth_xdp_buff.
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:veth_xdp_rx_timestamp (drivers/net/veth.c:1673)
Call Trace:
...
tun_build_skb (drivers/net/tun.c:1739)
tun_get_user (drivers/net/tun.c:1856)
tun_chr_write_iter (drivers/net/tun.c:2091)
vfs_write (fs/read_write.c:595 fs/read_write.c:687)
ksys_write (fs/read_write.c:739)
do_syscall_64 (arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception in interrupt
Restrict non-offloaded programs to exact netdev matches and retain the
shared-offdev fallback only for genuinely offloaded multi-port programs. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: manage XDP program pointers during channel resize
veth_set_channels() tears down XDP resources for removed RX queues
without clearing rq->xdp_prog. If the program is then detached or
replaced, those queues keep the old pointer after bpf_prog_put().
A later channel increase can re-enable NAPI and run the freed program.
BUG: unable to handle page fault for address: ffffc90000256048
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: veth_xdp_rcv_skb (include/linux/filter.h:779
include/net/xdp.h:696 drivers/net/veth.c:820)
Call Trace:
veth_xdp_rcv (drivers/net/veth.c:941)
veth_poll (drivers/net/veth.c:986)
__napi_poll (net/core/dev.c:7787)
net_rx_action (net/core/dev.c:7850 net/core/dev.c:8007)
handle_softirqs (kernel/softirq.c:645)
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use array_map_meta_equal for percpu array inner map replacement
percpu_array_map_ops.map_meta_equal points to the generic
bpf_map_meta_equal(), which does not compare max_entries. When a
percpu array serves as an inner map, replacing it with one that has
fewer max_entries bypasses the check. Since percpu_array_map_gen_lookup()
inlines the original template's index_mask as a JIT immediate, a lookup
on the replacement map can access pptrs[] out of bounds.
Point percpu_array_map_ops.map_meta_equal to array_map_meta_equal(),
which already enforces the max_entries equality check.
Add a selftest to verify that replacing a percpu array inner map with
a differently-sized one is rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix use-after-free of retransmit_skb_hint in tcp_send_synack()
When tcp_send_synack() replaces the cloned SYN skb at the head of the
retransmit queue with a copy, it frees the original with
tcp_rtx_queue_unlink_and_free() and only repairs tp->highest_sack.
tp->retransmit_skb_hint keeps pointing at the freed
skbuff_fclone_cache object.
The dangling hint is read in tcp_verify_retransmit_hint() and used as
the root of the rbtree walk in tcp_xmit_retransmit_queue(). An
unprivileged TFO client (sendmsg(MSG_FASTOPEN)) can arm the hint with
an attacker-supplied ICMP fragmentation-needed message, after which a
simultaneous open frees the armed SYN skb:
BUG: KASAN: slab-use-after-free in tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
Read of size 4 at addr ffff88800604d928 by task swapper/1/0
Call Trace:
tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
tcp_simple_retransmit (net/ipv4/tcp_input.c:3158)
tcp_v4_err (net/ipv4/tcp_ipv4.c:587)
Sync the hint to the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't run ops.dequeue() with a DSQ lock held
ops.dequeue() is invoked with the source user DSQ's lock still held on
the consume and move paths (scx_consume_dispatch_q(),
move_task_between_dsqs()). A BPF scheduler which locks the source user
DSQ from ops.dequeue() - e.g. by iterating it with bpf_iter_scx_dsq -
self-deadlocks.
ops.dequeue() can only call the "any" kfuncs and none of them can lock a
builtin DSQ, so the global and bypass paths can't deadlock; however,
all DSQ locks share one lockdep class, so iterating any user DSQ from
ops.dequeue() on those paths trips the recursion check.
Move the invocation after the DSQ unlock on all three paths.
SCX_TASK_IN_CUSTODY is cleared under the lock serializing the transfer
so that the callback is invoked exactly once. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/cache: Introduce task_struct->sched_cache_grp to fix UAF
Add a sched_cache_grp pointer to task_struct so that scheduler code
can access the cache group directly via the task, without going
through mm->sched_cache_grp. This decouples the scheduler's hot-path
accesses from the mm_struct.
Each task holds its own refcount on the sched_cache_group, separate
from the reference held by its mm_struct. The reference is acquired
in copy_mm() (fork) and exec_mmap() (exec), and released in exit_mm().
This fixes the use-after-free when account_mm_sched() reaches the group
through a task whose mm is being switched, as reported by Hyunwoo:
https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/
Convert all scheduler code in fair.c and exit.c to use
p->sched_cache_grp instead of p->mm->sched_cache_grp.
Keep the fork/exec/exit reference management out of the generic mm
paths: add sched_cache_fork(), sched_cache_fork_cleanup(),
sched_cache_exec_mmap() and sched_cache_exit_mm() in
kernel/sched/cache_sched.c (with empty stubs for !CONFIG_SCHED_CACHE),
so fs/exec.c, kernel/fork.c and kernel/exit.c each call one helper
instead of open-coding the refcounting under #ifdef. Also add
sched_cache_group_get() and task_cache_group_get(). |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: core: avoid double-free of OTP NVMEM device
If factory OTP setup fails after the user OTP NVMEM device has been
registered, mtd_otp_nvmem_add() unregisters the user device but leaves
mtd->otp_user_nvmem set. On an error, the caller unregisters it again.
For -EOPNOTSUPP, registration continues and normal teardown unregisters
it again.
Clear mtd->otp_user_nvmem after unregistering it. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Disable TPM on null key name mismatch
The null key name check exists to protect against TPM reset attacks, so
a mismatch should stop the device from serving further requests.
Currently it does not disable the chip when it finds a mismatch.
The mismatch is logged:
tpm tpm0: null key integrity check failed
but the chip keeps serving commands:
/ # tpm2_getcap -c properties-fixed
TPM_PT_FAMILY_INDICATOR:
as UINT32: 0x08322e3000
as string: "2.0"
...
tpm2_load_null() where the null key name check is run sets the chip as
disabled only if the rc is non zero. When the mismatch is seen, rc is
zero at that point and it returns success. The other issue is that the
caller expects the null key handle to be populated when the function
returns 0 which it does here without writing the handle and proceeds
assuming the null key handle is valid.
During the test, I noticed that tpm2_start_auth_session() uses the
uninitialized stack value as the key handle since tpm2_load_null()
returns 0 despite the integrity failure and proceeds with
TPM2_CC_START_AUTH_SESS with this value as salt key handle.
Set rc to -ENODEV on the mismatch. The error path then disables the chip
and returns the correct code to the caller.
Tested in QEMU with swtpm and CONFIG_TCG_TPM2_HMAC=y by making
TPM2_CC_CONTEXT_LOAD fail with TPM2_RC_INTEGRITY and changing the name
of the re-created null key. The chip is now disabled on the mismatch. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: generalize pending status bit
Rename NF_FLOW_HW_PENDING to NF_FLOW_PENDING and use it to inhibit the
flowtable GC worker until pending hw offload work has been completed.
Apparently, nf_flow_offload_stats() can schedule work to retrieve stats
while the flow is being removed by GC.
And this bit can also be used in a follow up patch to disable GC until
the flow has been fully added in both directions.
Revert the reordering done in commit d644b23afe1e ("netfilter:
flowtable: publish HW_DEAD after worker is done") to prevent a race
between GC and hw offload handler. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: do not wake up kswapd in __kfree_rcu_sheaf()
Since kfree_rcu() can be called under pi_lock (a raw spinlock in the
scheduler), kfree_rcu() itself should never allocate memory with
__GFP_KSWAPD_RECLAIM as waking up kswapd ends up acquiring pi_lock,
which leads to a deadlock.
Reproducing the issue even intentionally was not straightforward.
The set_cpus_allowed_force() path that is called under pi_lock is
exercised very rarely, and competing tasks that allocate memory will
most likely wake kswapd up.
Therefore the existence of the deadlock was verified with a modified
kernel that has a lockdep map for waking up kswapd:
======================================================
WARNING: possible circular locking dependency detected
7.2.0-rc1-slab-for-next+ #10 Not tainted
------------------------------------------------------
git/6660 is trying to acquire lock:
ffff8e524533c550 (&p->pi_lock){-.-.}-{2:2}, at: _raw_spin_lock_irqsave+0x12/0x20
but task is already holding lock:
ffff8e57bffff1a0 (&pgdat->kswapd_wait){....}-{3:3}, at: _raw_spin_lock_irqsave+0x12/0x20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&pgdat->kswapd_wait){....}-{3:3}:
__lock_acquire+0x5a4/0xc50
lock_acquire.part.0+0xb7/0x240
lock_acquire+0x70/0x170
__raw_spin_lock_irqsave+0x44/0x80
_raw_spin_lock_irqsave+0x12/0x20
__wake_up_common_lock+0x31/0xa0
__wake_up+0x20/0x40
kswapd_wakeup_wake+0x7e/0x110
wakeup_kswapd+0x295/0x320
wake_all_kswapds+0xac/0x1a0
__alloc_pages_slowpath.constprop.0+0x282/0xf80
__alloc_frozen_pages_noprof+0x32a/0x360
alloc_slab_page+0x2e/0x160
allocate_slab+0x82/0x420
new_slab+0x52/0xb0
refill_objects+0x13d/0x190
refill_sheaf+0x5d/0xd0
__pcs_replace_empty_main+0x230/0xb10
[...]
-> #1 (kswapd_wakeup){-.-.}-{0:0}:
__lock_acquire+0x5a4/0xc50
lock_sync.part.0+0x75/0x100
lock_sync+0x36/0x70
might_wakeup_kswapd+0x61/0xa0
__kfree_rcu_sheaf+0x33/0xd90
kvfree_call_rcu+0x1d4/0x3b0
set_cpus_allowed_force+0x163/0x220
cpuset_cpus_allowed_fallback+0x18b/0x240
select_fallback_rq+0x1e6/0x250
[...]
-> #0 (&p->pi_lock){-.-.}-{2:2}:
check_prev_add+0xe6/0xe00
validate_chain+0x51e/0x6e0
__lock_acquire+0x5a4/0xc50
lock_acquire.part.0+0xb7/0x240
lock_acquire+0x70/0x170
__raw_spin_lock_irqsave+0x44/0x80
_raw_spin_lock_irqsave+0x12/0x20
try_to_wake_up+0x77/0xa90
default_wake_function+0x27/0x60
autoremove_wake_function+0x23/0xb0
__wake_up_common+0xb8/0x170
__wake_up_common_lock+0x51/0xa0
__wake_up+0x20/0x40
kswapd_wakeup_wake+0x7e/0x110
wakeup_kswapd+0x295/0x320
wake_all_kswapds+0xac/0x1a0
__alloc_pages_slowpath.constprop.0+0x282/0xf80
__alloc_frozen_pages_noprof+0x32a/0x360
alloc_slab_page+0x2e/0x160
allocate_slab+0x82/0x420
new_slab+0x52/0xb0
refill_objects+0x13d/0x190
refill_sheaf+0x5d/0xd0
__pcs_replace_empty_main+0x230/0xb10
[...]
other info that might help us debug this:
Chain exists of:
&p->pi_lock --> kswapd_wakeup --> &pgdat->kswapd_wait
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&pgdat->kswapd_wait);
lock(kswapd_wakeup);
lock(&pgdat->kswapd_wait);
lock(&p->pi_lock);
*** DEADLOCK ***
3 locks held by git/6660:
#0: ffff8e519f0e9e20 (&type->i_mutex_dir_key#6){++++}-{4:4}, at: lookup_slow+0x2d/0x60
#1: ffffffff8a31c460 (kswapd_wakeup){-.-.}-
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection()
In paste_selection(), the loop copies min_t(unsigned int,
vc_sel.buf_len - pasted,tty->receive_room) bytes per iteration into
tty_ldisc_receive_buf() and increments pasted += count.
Because the selection mutex (vc_sel.lock) is dropped inside the loop
Whenever the line discipline buffer fills up and paste_selection()
sleeps on tty->write_wait, a concurrent TIOCLINUX (TIOCL_SETSEL) ioctl
can replace vc_sel.buffer with a shorter selection and reduce
vc_sel.buf_len below pasted.
When paste_selection() resumes, vc_sel.buf_len - pasted underflows as an
unsigned integer to a large positive value, causing
tty_ldisc_receive_buf(ld, vc_sel.buffer + pasted, NULL, count) to read
up to 4094 bytes out-of-bounds past the newly allocated vc_sel.buffer.
Fix this by terminating the loop when pasted >= vc_sel.buf_len.
Kernel stack trace (Linux 7.3.0-rc3):
==================================================================
BUG: KASAN: slab-out-of-bounds in n_tty_receive_buf_common+0xa01/0x1650
Read of size 4094 at addr ffff888101c58010 by task kworker/u17:1/65
Workqueue: events_unbound flush_to_ldisc
Call Trace:
<TASK>
dump_stack_lvl+0x70/0xa0
print_report+0x153/0x4c6
kasan_report+0xf1/0x120
kasan_check_range+0x11c/0x200
__asan_memcpy+0x29/0x70
n_tty_receive_buf_common+0xa01/0x1650
tty_ldisc_receive_buf+0x66/0x110
tty_port_default_receive_buf+0x6b/0xb0
flush_to_ldisc+0x1b4/0x410
process_one_work+0x6ff/0x1110
worker_thread+0x4a8/0xb70
kthread+0x307/0x3e0
ret_from_fork+0x3ed/0x680
</TASK>
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
module: fix lost error code from codetag_load_module()
If codetag_load_module() fails, err is not set to reflect the failure
and load_module() returns 0 after the module has been torn down.
Also, if the module is a livepatch, mod->klp_info allocated by
copy_module_elf() leaks on this error path. Free it via a new
livepatch_cleanup label. |
| In the Linux kernel, the following vulnerability has been resolved:
net: extend IPv6 exthdr detection of tunneled packets
Commit c4336a07eb6b ("net: correctly handle tunneled traffic on IPV6_CSUM
GSO fallback") split skb_gso_has_extension_hdr() into mutually exclusive
branches on skb->encapsulation. This did not yet address all paths:
1. With skb->encapsulation set, the outer header is not checked. IPv6
tunnels such as ip6_gre and ip6_tunnel add an outer Destination
Options header by default (encap_limit). Their GSO packets skip
software GSO, then skb_csum_hwoffload_help() sees the outer extension
header and calls skb_checksum_help() on the GSO skb, which warns and
drops it.
2. Tunnels over IPv6 without an outer transport header, such as
ip6_tunnel, leave skb->transport_header at the inner transport
header. skb_network_header_len() then spans the outer IPv6, tunnel
and inner IP headers, a false positive.
3. UDP tunnels without an inner network header, such as SCTP-in-UDP or
PSP, have no inner IPv6 header to check. Decide on the outer header
alone.
4. Directly dereferencing inner_ip_hdr(skb)->version without
skb_header_pointer() is unsafe.
Instead, check ipv6_ext_hdr(nexthdr) on the outer IPv6 header and, if
set, on the inner IPv6 header. Read the headers with skb_header_pointer().
Keep the skb_network_header_len() check when !skb->encapsulation to also
catch encapsulated packets without skb->encapsulation (e.g., virtio).
Use the same helper in skb_csum_hwoffload_help(). Its open coded test
has the false positive of (2) and ignores the inner header.
Background: checksum offload of tunneled packets invariants:
Non-GSO skb:
- If the inner packet is CHECKSUM_PARTIAL, Local Checksum Offload computes
the outer checksum in software and the device offloads only the inner L4
checksum.
- If the inner packet is CHECKSUM_NONE (e.g., SCTP-in-UDP, ESP-in-UDP,
Remote Checksum Offload), the device offloads the outer UDP or GRE
checksum instead.
GSO skb:
- A device with NETIF_F_GSO_UDP_TUNNEL_CSUM or NETIF_F_GSO_GRE_CSUM
computes both inner and outer checksums per segment.
The outer checksum is seeded with only the pseudo-header checksum.
A NETIF_F_IPV6_CSUM device must parse through the outer headers to
reach the inner ones. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix missing migration protection in __rhtab_map_lookup_and_delete_batch()
bpf_mem_cache_free_rcu() uses this_cpu_ptr() which requires migration
to be disabled. All callers of rhtab_delete_elem() disable migration
except __rhtab_map_lookup_and_delete_batch(), which calls it under
rcu_read_lock() only.
On CONFIG_PREEMPT_RCU, rcu_read_lock() does not disable preemption or
migration, so the task can migrate between CPUs during the delete loop,
causing this_cpu_ptr() to trigger:
BUG: using smp_processor_id() in preemptible [00000000] code
Fix by wrapping the delete loop in migrate_disable()/migrate_enable()
in __rhtab_map_lookup_and_delete_batch(), matching the migration
protection that the other callers already provide. |
| In the Linux kernel, the following vulnerability has been resolved:
net: page_pool: fix use-after-free in page_pool_recycle_ring_bulk()
With CONFIG_PAGE_POOL_STATS=y, page_pool_recycle_ring_bulk() updates
the recycle stats after dropping the producer lock. If it just recycled
the last inflight netmems of a pool being destroyed, page_pool_release()
can pass its producer-lock barrier and free the pool before
recycle_stat_add() runs.
Commit fcc680a647ba7 ("page_pool: allow mixing PPs within one bulk")
moved this stat update after the unlock. Commit 271683bb2cf32
("page_pool: Fix use-after-free in page_pool_recycle_in_ring") later
added the barrier, but only fixed page_pool_recycle_in_ring(). Move
the update back under the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix slab-out-of-bounds when handling team device events
The mlx5_handle_changeupper_event() and mlx5_handle_changeinfodata_event()
functions check for LAG masters (which includes both bonding and team
devices) but only call bonding-specific APIs. When processing team device
events, calling bond_slave_get_rcu() and bond_is_slave_inactive() on
team_port structures causes KASAN to detect an out-of-bounds memory access
since team_port is smaller than bond slave.
Fix this by wrapping the bond-specific API calls with a check for bonding
devices. This allows the function to still process LAG events for both
bonding and teams but only calls bond-specific functions when dealing with
actual bonding devices.
For mlx5_handle_changeinfodata_event(), keep the explicit bond check as
mlx5 doesn't handle state information for team ports anyway.
Tested with Mellanox ConnectX-5 on Linux 7.2.0-rc6:
- Bonding: PASS (no regressions)
- Team device: PASS (no KASAN errors) |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix cdev lifetime
Sashiko bot reported a potential problem for the cdev lifetime in [0]
- the code there is heavily based on the NVMe code.
Currently the NS head .open and .release file_operations methods take and
put a reference to the nvme_ns_head to ensure that this structure does not
disappear while we open fds for that cdev.
In multipath mode, when we teardown the NS head, we call nvme_cdev_del() ->
cdev_device_del() -> cdev_del(). However after cdev_del() returns, cdevs
already open will remain and their fops will still be callable. As such,
we can still reference the cdev after the nvme_ns_head reference count
drops to 0 (and is freed).
This can be shown with an application which delays between opening the cdev
and issuing the ioctl while the NS head is being torn down:
# ./ioctl_file /dev/ng1n1 &
# waiting 10 seconds ....
# ./ini_nvme_teardown.sh
[ 21.221718] nvme nvme1: Removing ctrl: NQN "nvme-test-target"
[ 21.274609] nvme nvme2: Removing ctrl: NQN "nvme-test-target"
# now going to issue ioctl ....
[ 26.549285] ==================================================================
[ 26.550841] BUG: KASAN: slab-use-after-free in cdev_put.part.0+0x3d/0x40
[ 26.552352] Read of size 8 at addr ffff88811e7fa170 by task ioctl_file/237
[ 26.553805]
[ 26.554227] CPU: 3 UID: 0 PID: 237 Comm: ioctl_file Not tainted 7.2.0-rc1-00004-g6852a10e32d4 #921 PREEMPT(lazy)
[ 26.554236] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 26.554241] Call Trace:
[ 26.554245] <TASK>
[ 26.554248] dump_stack_lvl+0x68/0xa0
[ 26.554266] print_report+0x10d/0x5d0
[ 26.554276] ? __virt_addr_valid+0x21d/0x3f0
[ 26.554287] ? cdev_put.part.0+0x3d/0x40
[ 26.554292] kasan_report+0x96/0xd0
[ 26.554300] ? cdev_put.part.0+0x3d/0x40
[ 26.554307] cdev_put.part.0+0x3d/0x40
[ 26.554313] __fput+0x7bc/0xa70
[ 26.554322] fput_close_sync+0xd8/0x190
[ 26.554328] ? __pfx_fput_close_sync+0x10/0x10
[ 26.554337] __x64_sys_close+0x79/0xd0
[ 26.554344] do_syscall_64+0x117/0x6b0
[ 26.554351] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 26.554358] RIP: 0033:0x7f938c067727
[ 26.554364] Code: 48 89 fa 4c 89 df e8 28 ad 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5bf
[ 26.554369] RSP: 002b:00007fff49f05980 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
[ 26.554376] RAX: ffffffffffffffda RBX: 00007f938bfd7780 RCX: 00007f938c067727
[ 26.554380] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
[ 26.554383] RBP: 00007fff49f05a10 R08: 0000000000000000 R09: 0000000000000000
[ 26.554386] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 26.554389] R13: 00007fff49f05b40 R14: 00007f938c207000 R15: 000055c148471d78
[ 26.554397] </TASK>
[ 26.554399]
[ 26.575612] Allocated by task 100:
[ 26.575871] kasan_save_stack+0x24/0x50
[ 26.576157] kasan_save_track+0x14/0x30
[ 26.576418] __kasan_kmalloc+0x7f/0x90
[ 26.576668] __kmalloc_noprof+0x281/0x6c0
[ 26.576938] nvme_alloc_ns+0x7f7/0x3170
[ 26.577206] nvme_scan_ns+0x508/0x880
[ 26.577449] async_run_entry_fn+0x8c/0x350
[ 26.577723] process_scheduled_works+0xb6f/0x1a00
[ 26.578034] worker_thread+0x4ad/0xb40
[ 26.578283] kthread+0x34f/0x450
[ 26.578501] ret_from_fork+0x563/0x800
[ 26.578752] ret_from_fork_asm+0x1a/0x30
[ 26.579012]
[ 26.579124] Freed by task 237:
[ 26.579335] kasan_save_stack+0x24/0x50
[ 26.579596] kasan_save_track+0x14/0x30
[ 26.579855] kasan_save_free_info+0x3a/0x60
[ 26.580131] __kasan_slab_free+0x43/0x70
[ 26.580388] kfree+0x321/0x500
[ 26.580591] nvme_ns_head_chr_release+0x39/0x50
[ 26.580883] __fput+0x352/0xa70
[ 26.581095] fput_close_sync+0xd8/0x190
[ 26.581350] __x64_sys_close+0x79/0xd0
[ 26.581595] do_syscall_64+0x117/0x6b0
[ 26.581842] entry_SYSCAL
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: bound TX aggregation to MAX_TX_BUF_SIZE
__hif_usb_tx() dequeues up to MAX_TX_AGGR_NUM (20) frames into a
single tx_buf of MAX_TX_BUF_SIZE (32768) bytes, limiting the batch
by record count but never by cumulative byte length.
With large frames (MTU 2304), 20 aggregated frames of 2292 bytes
each exceed the allocation (20 * 2296 = 45920 bytes), so the
memcpy() in the loop writes up to 13152 bytes past tx_buf->buf
before usb_submit_urb().
Peek the queue head and stop before copying any record that would
cross MAX_TX_BUF_SIZE, then dispatch the current batch. Leftover
skbs remain queued and are drained on the next URB completion.
The byte bound changes the loop's exit semantics: it can now exit
before i == tx_skb_cnt - 1. Stock only finalized tx_buf->len on
that last index (len += offset), so an early break would submit a
URB holding only the last record's length while every dequeued skb
is freed on completion, silently dropping frames. Make tx_buf->len
a running total and advance tx_buf->offset per record instead; the
stride round_up(nskb->len + 4, 4) is identical to the stock stride
when the loop runs to completion.
Tested on hardware with an MTU 2304 flood: the loop stops at
record 15 (len = 32144, offset = 32144, within 32768), no
oversized URB is submitted, and MTU 1500 pings pass 20/20. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cap skb->queue_mapping when the tx queue is picked
skbedit can set skb->queue_mapping and raise the per-CPU skip_txqueue
flag so __dev_queue_xmit() honours the mapping. __dev_queue_xmit()
cleared the flag before sch_handle_egress() and only read it afterwards,
so the flag was not confined to the xmit that set it: a nested xmit
(mirred redirect or mirror, or a drop after skbedit) could set the flag
and the outer xmit would consume it for an skb that never went through
skbedit.
A forwarded packet still carries the ingress NIC's rx_queue + 1 in
skb->queue_mapping, so the outer device then indexes its tx queue state
with that stale value. Taprio's child array q->qdiscs[] is sized to the
device's queue count, so taprio_enqueue() indexes past its allocation
and dereferences the result as a struct Qdisc *.
We (ab)use the skb->nf_skip_egress which means "skip netfilter egress
for this packet" to tag to "am I in tc egress?". Despite the overload
I dont see it as a conflict since the marker is set only around the
single sch_handle_egress() call and ingress path is guarded by
tc_at_ingress.
I will send a followup(net-next) patch once this hits net-next to
rename the skb->nf_skip_egress bit/flag to skb->skip_egress
Arm the flag only from the egress classifier that can use it: raise
skip_txqueue from tcf_skbedit_act() only when it runs inside
sch_handle_egress(), thanks to skb->nf_skip_egress. An egress qdisc
classifier runs in q->enqueue(), after the tx queue has been picked,
so a mapping it sets cannot affect the current packet; arming the flag
there only pollutes it for a later xmit. Then own the flag for the xmit
frame the egress hook runs in: save the incoming value and clear it just
before sch_handle_egress(), and restore it after the hook - on the
consumed (drop) path, or, in the same call that reads it, on the
surviving path. The save and the restores stay inside the
egress_needed_key static branch, so a packet pays for them only when
egress hooks are active (2f1e85b1aee4).
Store the value netdev_cap_txqueue() selected back into skb->queue_mapping
in netdev_tx_queue_mapping(), as netdev_core_pick_tx() already does, so
the skip_txqueue path never hands a later reader on the xmit path a
mapping the device cannot serve. A store made still later in the same
frame, by a tc BPF program attached to a transmit qdisc, is outside this
path and is not re-capped; a separate followup will resolve that path.
netdev_xmit_skip_txqueue() returns the previous flag value so the
save-and-clear is one call, and a no-op stub is provided when
CONFIG_NET_EGRESS is disabled. skb->nf_skip_egress is compiled under
CONFIG_NET_EGRESS rather than CONFIG_NETFILTER_SKIP_EGRESS, so
skb_at_tc_egress() is valid whenever the egress path is built.
A local user in a network namespace can redirect a packet from a device
with more TX queues to one with fewer after setting a mapping valid only
on the larger device. That reaches these reads and, under KASAN, faults
with "slab-out-of-bounds in taprio_enqueue".
Conditions to recreate the bug: the report's own trigger is a local user
with CAP_NET_ADMIN in a network namespace, so no eBPF program is needed.
With CONFIG_NET_SCH_TAPRIO=y, CONFIG_NET_ACT_SKBEDIT=y,
CONFIG_NET_ACT_MIRRED=y, CONFIG_NET_CLS_MATCHALL=y,
CONFIG_NET_SCH_PRIO=y and KASAN enabled, create qa (3 queues), qb
(2 queues) and qc (1 queue) as dummy devices; put a taprio root on qb
(num_tc 1, queues 2@0) and clsact on all three; then add an egress
matchall filter on every device. On qa: "action skbedit queue_mapping 2
pipe action mirred egress redirect dev qb". On qb: "action mirred egress
mirror dev qc". On qc: "action skbedit queue_mapping 0 pipe". Send one
packet out qa. qc's skbedit sets the flag while qb's outer xmit is in
flight; without the fix qb consumes it and reads its two-entry taprio
child array with the forwarded packet's stale mapping. A qc whose
skb
---truncated--- |
