| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix NULL pointer dereference when the 'R' flag is used
If the dm-integrity device has the SB_FLAG_DIRTY_BITMAP flag set and the
user activates the device in the 'R' mode, a crash in dm_integrity_resume
happens because the function attempts to read the journal containing the
bitmap.
This patch makes dm-integrity skip any writes to the device in
dm_integrity_resume if the device is activated in the 'R' mode. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ati_remote2 - fix type confusion in device attribute handlers
Previously, the channel_mask and mode_mask attributes were registered on
the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b
("Input: ati-remote2 - use driver core to instantiate device
attributes") converted the driver to let the driver core manage them via
dev_groups in struct usb_driver, the attributes moved to the bound
usb_interface devices, but the show and store callbacks were not updated
accordingly.
As a result, the callbacks still invoked to_usb_device() on a device
pointer belonging to a struct usb_interface, producing an invalid
usb_device pointer.
Use to_usb_interface() directly in the attribute handlers to obtain the
interface and its driver data. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: udp: Create exceptions before socket matching
Currently, when ICMPv6 Packet Too Big and Redirect Message packets are
locally delivered and quote a UDP packet, an exception is only created
in the IPv6 exception cache if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the exception cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and
commit a00df2caffed ("ipv6: make exception cache less predictible") tried
to mitigate such attacks by making it harder for attackers to discover
hash collisions in the exception cache and by randomizing the number of
exceptions a hash bucket can hold, respectively. Unfortunately, both of
the mitigations can be bypassed.
Instead, mitigate such attacks by always creating an exception, even
before trying to find a matching socket. Do that by calling
ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted
packet did not originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in an exception being created or updated in the cache that
the attacker can observe.
Pass the ifindex of the ingress device and the default uid, in a similar
fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any
nexthop in ip6_redirect_nh_match() and no exception would be created in
response to a Redirect Message.
Note that this does not allow attackers to create exceptions that they
could not create before, as both helpers can already be reached with
little to no validation. For example, by sending an ICMPv6 error that
quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that
matches a wildcard socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ip6_sk_update_pmtu() /
ip6_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the exception cache of the nexthop resolved by the no socket helpers
and another in the exception cache of the nexthop used by the socket. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: fbtft: make dirty_lock IRQ-safe
fbtft_mkdirty() can be reached from the fbcon rendering path while
processing printk() in hardirq context. Meanwhile, dirty_lock is also
taken by fbtft_deferred_io() in workqueue context with local interrupts
enabled.
Lockdep reports a possible IRQ lock inversion involving dirty_lock and
console_owner. A hardirq can interrupt a CPU holding dirty_lock and
enter the console rendering path, which can attempt to acquire
dirty_lock again.
The following lockdep report was observed on an RK3566 system with
CONFIG_PROVE_LOCKING enabled:
WARNING: possible irq lock inversion dependency detected
swapper/2/0 just changed the state of lock:
(console_owner){-...}-{0:0}
but this lock took another, HARDIRQ-unsafe lock in the past:
(&par->dirty_lock){+.+.}-{2:2}
CPU0 CPU1
---- ----
lock(&par->dirty_lock);
local_irq_disable();
lock(console_owner);
lock(&par->dirty_lock);
<Interrupt>
lock(console_owner);
*** DEADLOCK ***
Use spin_lock_irqsave() for fbtft_mkdirty() and spin_lock_irq() for
fbtft_deferred_io(). They only access the dirty line range, so the
IRQ-off regions remain short. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix napi_disable deadlock when attempting to disable XSK pools
When disabling XSK pools, GVE calls the unlocked versions of
napi_disable and napi_enable. However, the netdev lock has already been
acquired before ndo_bpf is called because GVE supports queue management
ops. Calling the unlocked versions of napi_disable/enable results in a
deadlock when attempting to disable XSK pools, as the thread attempts to
re-acquire a lock it already holds.
Update the NAPI calls to use the locked versions.
This issue was found in production. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: reject net_iov in zerocopy receive mapping hints
After copying a readable prefix, receive_fallback_to_copy() asks
tcp_zerocopy_set_hint_for_skb() where page mapping can resume. If the
next skb is unreadable, find_next_mappable_frag() passes its net_iov
fragment to can_map_frag().
skb_frag_page() returns NULL for a net_iov, but can_map_frag()
dereferences it in PageCompound(). A v7.2 KASAN run on a connected TCP
socket with 64 readable bytes followed by a 4096-byte NET_IOV_DMABUF
fragment reported:
BUG: KASAN: null-ptr-deref in can_map_frag
tcp_zerocopy_receive -> can_map_frag
Kernel panic - not syncing: KASAN: panic_on_warn set
The diagnostic inserted the net_iov directly because the test host has
no devmem-capable NIC. Hardware end-to-end reachability remains untested
and requires CONFIG_NET_DEVMEM plus a supported DMA-buf-bound RX queue.
Reject all net_iov fragments before skb_frag_page(). This covers both
DMABUF and IOURING net_iov types while leaving page-backed checks
unchanged. With the guard, the same queue copied the readable prefix,
returned a 4096-byte skip hint, and completed without a fault. |
| In the Linux kernel, the following vulnerability has been resolved:
af_packet: Don't cast tpacket_hdr.tp_len to int in tpacket_parse_header().
syzbot reported BUG() in sock_sendmsg_nosec(). [0]
The problem is that tpacket_parse_header() casts user-provided
tpacket_hdr.tp_len, which is u32, to int.
If the length is larger than INT_MAX, the following condition
in tpacket_parse_header() passes,
if (unlikely(tp_len > size_max))
and any negative value can be returned to the caller, up to
sock_sendmsg_nosec().
The repro set tpacket_hdr.tp_len to 0xfffffdef, which is cast
to -EIOCBQUEUED (-529), triggering BUG() in sock_sendmsg_nosec().
*(uint64_t*)0x200000000008 = 0xfffffdef;
...
syscall(__NR_write, /*fd=*/r[0], /*buf=*/0x200000000000ul, /*count=*/1ul);
Let's define the local tp_len as u32 in tpacket_parse_header().
[0]:
kernel BUG at net/socket.c:803!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 5628 Comm: syz-executor176 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
RIP: 0010:sock_sendmsg_nosec+0x145/0x180 net/socket.c:803
Code: 06 67 48 0f b9 3a eb 95 e8 e8 3a 22 f8 48 89 df 4c 89 f6 4c 89 e2 4d 89 fb 2e e8 32 a5 5c 16 e9 51 ff ff ff e8 cc 3a 22 f8 90 <0f> 0b e8 c4 3a 22 f8 48 83 c3 18 48 89 d8 48 c1 e8 03 42 80 3c 28
RSP: 0018:ffffc90003aefb48 EFLAGS: 00010293
RAX: ffffffff89a578d4 RBX: ffff8880764c67c0 RCX: ffff88807fb23e80
RDX: 0000000000000000 RSI: 00000000fffffdef RDI: 00000000fffffdef
RBP: 00000000fffffdef R08: ffffc90003aef747 R09: 1ffff9200075dee8
R10: dffffc0000000000 R11: fffff5200075dee9 R12: 0000000000000001
R13: dffffc0000000000 R14: ffffc90003aefbc0 R15: ffffffff8aac4310
FS: 000055559101b400(0000) GS:ffff888124ce0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000000210 CR3: 0000000073dca000 CR4: 00000000003526f0
Call Trace:
<TASK>
__sock_sendmsg net/socket.c:815 [inline]
sock_write_iter+0x2de/0x3e0 net/socket.c:1266
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f173130ecb9
Code: c0 79 93 eb d5 48 8d 7c 1d 00 eb 99 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 d8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd67e44248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f173130ecb9
RDX: 0000000000000001 RSI: 0000200000000000 RDI: 0000000000000003
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd67e44388
R13: 0000000000000002 R14: 00002000000000c0 R15: 0000000000000002
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Free outstanding DMA buffers on dmaengine stop
In the dmaengine path the driver pre-submits RX buffers and holds
in-flight TX buffers whose SKBs are DMA-mapped by the driver and freed
only in the completion callbacks. On ndo_stop() dmaengine_terminate_sync()
aborts these descriptors without running their callbacks, and the driver
then frees only the ring shells, leaking every SKB still owned by the
engine and its DMA mapping on each ifdown. With 128 RX buffers pre-posted
per channel, the mapping leak can eventually exhaust a limited IOMMU
aperture.
Clear the slot's skb in the TX and RX callbacks so a non-NULL skb marks a
slot that still owns a live, DMA-mapped buffer, and on stop unmap and free
every such buffer.
axienet_dma_rx_cb() runs from the DMA tasklet and re-arms the RX ring on
each completion, so it can race axienet_stop(): a completion may submit a
fresh buffer after dmaengine_terminate_sync() has returned, leaving the
channel armed with a buffer the teardown then frees while the engine may
still write into it (dma_release_channel() does not stop it either). Add a
lock that axienet_dma_rx_cb() holds across the @stopping check and the
resubmit, and axienet_stop() holds to set @stopping before terminating.
Once @stopping is set no callback can arm a new buffer, and any armed just
before is aborted by the terminate, so teardown only frees buffers the
engine no longer owns. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: free the matchall entry on destroy
sparx5_tc_matchall_replace() allocates a struct sparx5_mall_entry for
every offloaded matchall filter and adds it to sparx5->mall_entries.
sparx5_tc_matchall_destroy() removes the entry from the list, but never
frees it, so the entry of every deleted mirror and goto matchall filter
is leaked.
Free the entry after unlinking it.
The leak was discovered by an AI code review agent, and reproduced with
kmemleak on a lan969x EV board (EV23X71A) by repeatedly adding and
deleting matchall mirror and goto filters. With the fix, kmemleak no
longer reports the leak. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: glink: fix use-after-free of ucsi on remove
The pmic_glink client is released by the devres cleanup, which runs
after pmic_glink_ucsi_remove() has returned, so its notification
callbacks can queue work until then. Work that runs after
ucsi_unregister() has been called touches freed state: it dereferences
the connector array that ucsi_unregister() freed, or registers and
unregisters the instance a second time.
Disable both work items with disable_work_sync() before unregistering,
and unregister only if the instance is still registered.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Don't apply va_align to hugetlb mappings on AMD F15h
get_align_mask() returns huge_page_mask_align() for hugetlbfs, but get_align_bits()
adds va_align.bits regardless, so vm_unmapped_area() returns an address off the huge
page boundary and __unmap_hugepage_range() hits BUG_ON(start & ~huge_page_mask(h)) at
teardown.
This can be triggered on Carrizo and FX-8370E, both hstates.
Pass the file to get_align_bits() and skip the randomisation for hugetlbfs.
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/altera: Drop __init from ECC setup paths for re-probe safety
Sashiko reports:
"Does suppressing sysfs unbinding fully prevent the execution of freed __init
memory? If altr_sysmgr_regmap_lookup_by_phandle() returns -EPROBE_DEFER, the
probe is deferred until after __init memory is freed."
The a10 EDAC .setup callbacks (sdmmc, ethernet, nand, dma, usb, qspi) and
their helpers (altr_init_a10_ecc_device_type, altr_init_a10_ecc_block) were
marked __init. These run from the probe path, which may execute after init
memory is freed -- e.g. a probe deferred via -EPROBE_DEFER that only succeeds
once a late/module dependency appears, or a manual unbind/rebind. Calling
__init code then dereferences freed memory. Remove __init so these functions
remain valid at runtime. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/i2c: cancel the client work on remove
xe_i2c_notifier() stores the DesignWare adapter in i2c->adapter and
schedules i2c->work when the adapter is registered under the xe I2C
platform device, and xe_i2c_client_work() then instantiates the AMC
client device on that adapter.
xe_i2c_remove() tears down the AMC, unregisters the client devices,
the bus notifier and the adapter platform device, but it never drains
i2c->work. A work item that is still queued or running when the
adapter is unregistered dereferences i2c->adapter in
i2c_new_client_device() after platform_device_unregister() has
released the adapter. The work item is also embedded in the
devm-allocated struct xe_i2c, so a work item still queued after the
drm device devm unwind frees that allocation runs its callback on
freed memory.
The bus notifier is the only thing that schedules this work, and it is
unregistered after the client devices. An instance that is still queued
when the teardown runs can therefore write
i2c->client[XE_I2C_CLIENT_AMC] while the loop is unregistering and
clearing the same array, and an AMC client it instantiates late is only
cleaned up by the adapter's own child sweep in i2c_del_adapter().
Move bus_unregister_notifier() in front of the client teardown loop
and cancel the work right after it, so no new instance can be
scheduled and a queued instance is drained before the client array is
touched. A running instance still finds a live adapter, since the
adapter is unregistered later.
(cherry picked from commit a23f27d5ec11c3f418c5e5531eea34ccda2b5b20) |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: set BLK_FEAT_ZONED only after the zone info is known
The namespace head is marked zoned at allocation time based only on the
command set identifier. If the zone info query reports a zero zone size,
the path namespace is registered without zoned limits while the head
still advertises the zoned capability with a zone size of zero, and
reporting zones or writing to the head then shifts by ilog2(0).
Drop the zoned feature from the head allocation and let the head limits
refresh stack it in from the path namespace instead. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: fix off-by-four bounds check in tpm2_get_random()
When the response carries the TPM2_ST_SESSIONS tag, tpm2_get_random()
skips the 4-byte parameter size field before locating the random data,
but the bounds check still validates the response length against
TPM_HEADER_SIZE. A truncated response can pass the check and make
memcpy() read up to 4 bytes past the response end, so stale buffer
contents end up in the caller's random bytes.
Fix this by checking the response length against 'offset', which
already includes the skipped parameter size field. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tipd: fix uninitialized typec_partner_desc in cd321x_update_work()
cd321x_update_work() passes a stack-allocated typec_partner_desc to
typec_register_partner() after initializing only usb_pd, accessory and
identity.
typec_register_partner() copies attach and deattach from the descriptor
into the partner. With those fields left unset, garbage function pointers
may be stored and later invoked from typec_partner_link_device() when a USB
device is linked to the port. Uninitialized pd_revision and usb_capability
similarly leak stack data through partner sysfs.
Zero-initialize the descriptor so optional callbacks remain NULL and the
remaining fields are zero. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: restore active device pointers after failed sprout
btrfs_init_new_device() switches latest_dev and possibly s_bdev from the
seed device to the new sprout device before creating the first writable
chunks.
If chunk creation or the subsequent sprout setup fails, the error path
releases the new device without switching those pointers back.
btrfs_show_devname() can then dereference the freed latest_dev and crash.
Restore the active device pointers to the latest seed device before
removing and releasing the failed sprout device. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: detach failed sprout device from transaction update list
When creating the first metadata chunk for a sprout filesystem,
create_chunk() adds the new device to the transaction dev_update_list
through device->post_commit_list.
If the subsequent system chunk creation fails, btrfs_init_new_device()
aborts the transaction and releases the device while post_commit_list is
still linked. This triggers a warning in btrfs_free_device() and leaves
the transaction list referencing freed memory.
Detach the device while holding chunk_mutex before releasing it. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close()
acp6x_pdm_dma_close() does not free the runtime->private_data buffer
allocated in acp6x_pdm_dma_open(). Add the missing kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing alloc tagging of direct mempool allocations
Commit 1d78d56c43ef ("netfs: Fix folio_queue ENOMEM in writeback by
adding a mempool") added a mempool for the folio_queues and made the
request, subrequest and folio_queue allocations distinguish between
writeback and everything else. Writeback is part of memory reclaim
and must not fail due to ENOMEM, so it allocates under GFP_NOFS
through mempool_alloc(), which may dip into the pool's reserve and,
if that runs empty, wait for elements to be returned. The
GFP_KERNEL paths, which can return -ENOMEM to their callers, invoke
the pool's ->alloc() callback directly instead.
The direct call, however, skips the alloc_hooks() wrapper that the
mempool_alloc() macro provides. The pool callbacks, mempool_alloc_slab()
and mempool_kmalloc(), call kmem_cache_alloc_noprof() and kmalloc_noprof()
and rely on current->alloc_tag having been set by the caller. With
CONFIG_MEM_ALLOC_PROFILING_DEBUG=y this leads to
current->alloc_tag not set
WARNING: ./include/linux/alloc_tag.h:161 at __alloc_tagging_slab_alloc_hook
alloc_tag was not set
WARNING: ./include/linux/alloc_tag.h:166 at __alloc_tagging_slab_free_hook
at allocation and free time respectively, as reported when reading
files on a CIFS mount. The allocations are also missing from
/proc/allocinfo.
Wrap the direct ->alloc() invocations in alloc_hooks() with a new
mempool_alloc_noreserve() helper in include/linux/mempool.h, next to
the other alloc_hooks()-wrapped macros such as mempool_alloc(). The
GFP_KERNEL paths keep their failable allocation semantics, they just
get tagged now. |
