| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: use work queue to process beacon tx event
Commit 3a415daa3e8b ("wifi: ath11k: add P2P IE in beacon template")
from Feb 28, 2024 (linux-next), leads to the following Smatch static
checker warning:
drivers/net/wireless/ath/ath11k/wmi.c:1742 ath11k_wmi_p2p_go_bcn_ie()
warn: sleeping in atomic context
The reason is that ath11k_bcn_tx_status_event() will directly call might
sleep function ath11k_wmi_cmd_send() during RCU read-side critical
sections. The call trace is like:
ath11k_bcn_tx_status_event()
-> rcu_read_lock()
-> ath11k_mac_bcn_tx_event()
-> ath11k_mac_setup_bcn_tmpl()
……
-> ath11k_wmi_bcn_tmpl()
-> ath11k_wmi_cmd_send()
-> rcu_read_unlock()
Commit 886433a98425 ("ath11k: add support for BSS color change") added the
ath11k_mac_bcn_tx_event(), commit 01e782c89108 ("ath11k: fix warning
of RCU usage for ath11k_mac_get_arvif_by_vdev_id()") added the RCU lock
to avoid warning but also introduced this BUG.
Use work queue to avoid directly calling ath11k_mac_bcn_tx_event()
during RCU critical sections. No need to worry about the deletion of vif
because cancel_work_sync() will drop the work if it doesn't start or
block vif deletion until the running work is done.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, lsm: Add check for BPF LSM return value
A bpf prog returning a positive number attached to file_alloc_security
hook makes kernel panic.
This happens because file system can not filter out the positive number
returned by the LSM prog using IS_ERR, and misinterprets this positive
number as a file pointer.
Given that hook file_alloc_security never returned positive number
before the introduction of BPF LSM, and other BPF LSM hooks may
encounter similar issues, this patch adds LSM return value check
in verifier, to ensure no unexpected value is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: get rid of online repaire on corrupted directory
syzbot reports a f2fs bug as below:
kernel BUG at fs/f2fs/inode.c:896!
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Call Trace:
evict+0x532/0x950 fs/inode.c:704
dispose_list fs/inode.c:747 [inline]
evict_inodes+0x5f9/0x690 fs/inode.c:797
generic_shutdown_super+0x9d/0x2d0 fs/super.c:627
kill_block_super+0x44/0x90 fs/super.c:1696
kill_f2fs_super+0x344/0x690 fs/f2fs/super.c:4898
deactivate_locked_super+0xc4/0x130 fs/super.c:473
cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373
task_work_run+0x24f/0x310 kernel/task_work.c:228
ptrace_notify+0x2d2/0x380 kernel/signal.c:2402
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc6/0x190 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x279/0x370 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Online repaire on corrupted directory in f2fs_lookup() can generate
dirty data/meta while racing w/ readonly remount, it may leave dirty
inode after filesystem becomes readonly, however, checkpoint() will
skips flushing dirty inode in a state of readonly mode, result in
above panic.
Let's get rid of online repaire in f2fs_lookup(), and leave the work
to fsck.f2fs. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix state management in error path of log writing function
After commit a694291a6211 ("nilfs2: separate wait function from
nilfs_segctor_write") was applied, the log writing function
nilfs_segctor_do_construct() was able to issue I/O requests continuously
even if user data blocks were split into multiple logs across segments,
but two potential flaws were introduced in its error handling.
First, if nilfs_segctor_begin_construction() fails while creating the
second or subsequent logs, the log writing function returns without
calling nilfs_segctor_abort_construction(), so the writeback flag set on
pages/folios will remain uncleared. This causes page cache operations to
hang waiting for the writeback flag. For example,
truncate_inode_pages_final(), which is called via nilfs_evict_inode() when
an inode is evicted from memory, will hang.
Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared.
As a result, if the next log write involves checkpoint creation, that's
fine, but if a partial log write is performed that does not, inodes with
NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files"
list, and their data and b-tree blocks may not be written to the device,
corrupting the block mapping.
Fix these issues by uniformly calling nilfs_segctor_abort_construction()
on failure of each step in the loop in nilfs_segctor_do_construct(),
having it clean up logs and segment usages according to progress, and
correcting the conditions for calling nilfs_redirty_inodes() to ensure
that the NILFS_I_COLLECTED flag is cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)
Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0
(SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an
inbound PCIe TLP spans more than two internal AXI 128-byte bursts,
the bus may corrupt the packet payload and the corrupt data may
cause associated applications or the processor to hang.
The workaround for Errata #i2037 is to limit the maximum read
request size and maximum payload size to 128 bytes. Add workaround
for Errata #i2037 here.
The errata and workaround is applicable only to AM65x SR 1.0 and
later versions of the silicon will have this fixed.
[1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf |
| In the Linux kernel, the following vulnerability has been resolved:
smack: tcp: ipv4, fix incorrect labeling
Currently, Smack mirrors the label of incoming tcp/ipv4 connections:
when a label 'foo' connects to a label 'bar' with tcp/ipv4,
'foo' always gets 'foo' in returned ipv4 packets. So,
1) returned packets are incorrectly labeled ('foo' instead of 'bar')
2) 'bar' can write to 'foo' without being authorized to write.
Here is a scenario how to see this:
* Take two machines, let's call them C and S,
with active Smack in the default state
(no settings, no rules, no labeled hosts, only builtin labels)
* At S, add Smack rule 'foo bar w'
(labels 'foo' and 'bar' are instantiated at S at this moment)
* At S, at label 'bar', launch a program
that listens for incoming tcp/ipv4 connections
* From C, at label 'foo', connect to the listener at S.
(label 'foo' is instantiated at C at this moment)
Connection succeedes and works.
* Send some data in both directions.
* Collect network traffic of this connection.
All packets in both directions are labeled with the CIPSO
of the label 'foo'. Hence, label 'bar' writes to 'foo' without
being authorized, and even without ever being known at C.
If anybody cares: exactly the same happens with DCCP.
This behavior 1st manifested in release 2.6.29.4 (see Fixes below)
and it looks unintentional. At least, no explanation was provided.
I changed returned packes label into the 'bar',
to bring it into line with the Smack documentation claims. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: Allocate memory for driver private data
Fix driver not allocating memory for struct btintel_data which is used
to store internal data. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: soc-acpi-intel-lnl-match: add missing empty item
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: soc-acpi-intel-mtl-match: add missing empty item
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required. |
| In the Linux kernel, the following vulnerability has been resolved:
sched: sch_cake: fix bulk flow accounting logic for host fairness
In sch_cake, we keep track of the count of active bulk flows per host,
when running in dst/src host fairness mode, which is used as the
round-robin weight when iterating through flows. The count of active
bulk flows is updated whenever a flow changes state.
This has a peculiar interaction with the hash collision handling: when a
hash collision occurs (after the set-associative hashing), the state of
the hash bucket is simply updated to match the new packet that collided,
and if host fairness is enabled, that also means assigning new per-host
state to the flow. For this reason, the bulk flow counters of the
host(s) assigned to the flow are decremented, before new state is
assigned (and the counters, which may not belong to the same host
anymore, are incremented again).
Back when this code was introduced, the host fairness mode was always
enabled, so the decrement was unconditional. When the configuration
flags were introduced the *increment* was made conditional, but
the *decrement* was not. Which of course can lead to a spurious
decrement (and associated wrap-around to U16_MAX).
AFAICT, when host fairness is disabled, the decrement and wrap-around
happens as soon as a hash collision occurs (which is not that common in
itself, due to the set-associative hashing). However, in most cases this
is harmless, as the value is only used when host fairness mode is
enabled. So in order to trigger an array overflow, sch_cake has to first
be configured with host fairness disabled, and while running in this
mode, a hash collision has to occur to cause the overflow. Then, the
qdisc has to be reconfigured to enable host fairness, which leads to the
array out-of-bounds because the wrapped-around value is retained and
used as an array index. It seems that syzbot managed to trigger this,
which is quite impressive in its own right.
This patch fixes the issue by introducing the same conditional check on
decrement as is used on increment.
The original bug predates the upstreaming of cake, but the commit listed
in the Fixes tag touched that code, meaning that this patch won't apply
before that. |
| In the Linux kernel, the following vulnerability has been resolved:
kunit/overflow: Fix UB in overflow_allocation_test
The 'device_name' array doesn't exist out of the
'overflow_allocation_test' function scope. However, it is being used as
a driver name when calling 'kunit_driver_create' from
'kunit_device_register'. It produces the kernel panic with KASAN
enabled.
Since this variable is used in one place only, remove it and pass the
device name into kunit_device_register directly as an ascii string. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Stop amdgpu_dm initialize when stream nums greater than 6
[Why]
Coverity reports OVERRUN warning. Should abort amdgpu_dm
initialize.
[How]
Return failure to amdgpu_dm_init. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Stop amdgpu_dm initialize when link nums greater than max_links
[Why]
Coverity report OVERRUN warning. There are
only max_links elements within dc->links. link
count could up to AMDGPU_DM_MAX_DISPLAY_INDEX 31.
[How]
Make sure link count less than max_links. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check num_valid_sets before accessing reader_wm_sets[]
[WHY & HOW]
num_valid_sets needs to be checked to avoid a negative index when
accessing reader_wm_sets[num_valid_sets - 1].
This fixes an OVERRUN issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
libfs: fix get_stashed_dentry()
get_stashed_dentry() tries to optimistically retrieve a stashed dentry
from a provided location. It needs to ensure to hold rcu lock before it
dereference the stashed location to prevent UAF issues. Use
rcu_dereference() instead of READ_ONCE() it's effectively equivalent
with some lockdep bells and whistles and it communicates clearly that
this expects rcu protection. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: misaligned: Restrict user access to kernel memory
raw_copy_{to,from}_user() do not call access_ok(), so this code allowed
userspace to access any virtual memory address. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: protect references to superblock parameters exposed in sysfs
The superblock buffers of nilfs2 can not only be overwritten at runtime
for modifications/repairs, but they are also regularly swapped, replaced
during resizing, and even abandoned when degrading to one side due to
backing device issues. So, accessing them requires mutual exclusion using
the reader/writer semaphore "nilfs->ns_sem".
Some sysfs attribute show methods read this superblock buffer without the
necessary mutual exclusion, which can cause problems with pointer
dereferencing and memory access, so fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Avoid excessive partition lengths
Avoid mounting filesystems where the partition would overflow the
32-bits used for block number. Also refuse to mount filesystems where
the partition length is so large we cannot safely index bits in a
block bitmap. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: Remove proc entry when dev is unregistered.
syzkaller reported a warning in bcm_connect() below. [0]
The repro calls connect() to vxcan1, removes vxcan1, and calls
connect() with ifindex == 0.
Calling connect() for a BCM socket allocates a proc entry.
Then, bcm_sk(sk)->bound is set to 1 to prevent further connect().
However, removing the bound device resets bcm_sk(sk)->bound to 0
in bcm_notify().
The 2nd connect() tries to allocate a proc entry with the same
name and sets NULL to bcm_sk(sk)->bcm_proc_read, leaking the
original proc entry.
Since the proc entry is available only for connect()ed sockets,
let's clean up the entry when the bound netdev is unregistered.
[0]:
proc_dir_entry 'can-bcm/2456' already registered
WARNING: CPU: 1 PID: 394 at fs/proc/generic.c:376 proc_register+0x645/0x8f0 fs/proc/generic.c:375
Modules linked in:
CPU: 1 PID: 394 Comm: syz-executor403 Not tainted 6.10.0-rc7-g852e42cc2dd4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:proc_register+0x645/0x8f0 fs/proc/generic.c:375
Code: 00 00 00 00 00 48 85 ed 0f 85 97 02 00 00 4d 85 f6 0f 85 9f 02 00 00 48 c7 c7 9b cb cf 87 48 89 de 4c 89 fa e8 1c 6f eb fe 90 <0f> 0b 90 90 48 c7 c7 98 37 99 89 e8 cb 7e 22 05 bb 00 00 00 10 48
RSP: 0018:ffa0000000cd7c30 EFLAGS: 00010246
RAX: 9e129be1950f0200 RBX: ff1100011b51582c RCX: ff1100011857cd80
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002
RBP: 0000000000000000 R08: ffd400000000000f R09: ff1100013e78cac0
R10: ffac800000cd7980 R11: ff1100013e12b1f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ff1100011a99a2ec
FS: 00007fbd7086f740(0000) GS:ff1100013fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200071c0 CR3: 0000000118556004 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
proc_create_net_single+0x144/0x210 fs/proc/proc_net.c:220
bcm_connect+0x472/0x840 net/can/bcm.c:1673
__sys_connect_file net/socket.c:2049 [inline]
__sys_connect+0x5d2/0x690 net/socket.c:2066
__do_sys_connect net/socket.c:2076 [inline]
__se_sys_connect net/socket.c:2073 [inline]
__x64_sys_connect+0x8f/0x100 net/socket.c:2073
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fbd708b0e5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007fff8cd33f08 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fbd708b0e5d
RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000040 R09: 0000000000000040
R10: 0000000000000040 R11: 0000000000000246 R12: 00007fff8cd34098
R13: 0000000000401280 R14: 0000000000406de8 R15: 00007fbd70ab9000
</TASK>
remove_proc_entry: removing non-empty directory 'net/can-bcm', leaking at least '2456' |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: SHAMPO, Fix incorrect page release
Under the following conditions:
1) No skb created yet
2) header_size == 0 (no SHAMPO header)
3) header_index + 1 % MLX5E_SHAMPO_WQ_HEADER_PER_PAGE == 0 (this is the
last page fragment of a SHAMPO header page)
a new skb is formed with a page that is NOT a SHAMPO header page (it
is a regular data page). Further down in the same function
(mlx5e_handle_rx_cqe_mpwrq_shampo()), a SHAMPO header page from
header_index is released. This is wrong and it leads to SHAMPO header
pages being released more than once. |
