| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Unauthenticated credential disclosure in the wizard interface in ZTE ZXHN H188A V6.0.10P2_TE and V6.0.10P3N3_TE allows unauthenticated attackers on the local network to retrieve sensitive credentials from the router's web management interface, including the default administrator password, WLAN PSK, and PPPoE credentials. In some observed cases, configuration changes may also be performed without authentication. |
| Parse Server before 8.6.103 and 9.0.0 before 9.10.5-alpha.4 contains an information disclosure vulnerability in LiveQuery. Its subscription hash omits constraints next to a $or operator, including the _Session owner filter and beforeSubscribe constraints, so distinct subscriptions are grouped together. Authenticated clients subscribing with $or queries can receive other users' events, including session tokens usable for impersonation. |
| Sensitive data exposure leading to admin/WLAN credential leak in ZTE ZXHN H298A 1.1 and H108N 2.6. A crafted request to the router web interface can expose sensitive device and account information. In affected builds, the response may include the administrator password and WLAN PSK, enabling authentication bypass and network compromise. Some firmware versions may expose only partial identifiers (e.g., serial number, ESSID, MAC addresses). |
| Rclone from 1.64.0 before 1.75.2 contains an authentication bypass vulnerability in serve webdav that lets unauthenticated attackers skip authentication by sending OPTIONS requests. Attackers can probe arbitrary paths and compare Allow header values to determine whether files or collections exist, enabling namespace enumeration. |
| rclone from v1.56.0 before v1.75.2 contains an information disclosure vulnerability in the WebDAV backend that forwards operator-configured custom credential headers to different hosts on HTTP 3xx redirects. Attackers who control or influence a cross-host redirect can capture headers such as X-Auth-Token set via --webdav-headers and replay them against the original WebDAV service. |
| The GiveWP WordPress plugin before 4.19.0.1 does not perform any status or capability check when rendering a donation form on a public front-end route, allowing unauthenticated visitors to view the content and settings of unpublished (draft, pending, private and scheduled) donation forms that WordPress core otherwise keeps non-public. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: udp: Create exceptions before socket matching
Currently, when ICMP Fragmentation Needed and Redirect Message packets
are locally delivered and quote a UDP packet, a FIB nexthop exception
(FNHE) is only created if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the FNHE cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()") and commit 67d6d681e15b ("ipv4: make exception cache
less predictible") tried to mitigate such attacks by making it harder
for attackers to discover hash collisions in the FNHE cache and by
randomizing the number of exceptions a hash bucket can hold,
respectively. Unfortunately, both of the mitigations can be bypassed.
Instead, mitigate such attacks by always creating a FNHE, even before
trying to find a matching socket. Do that by calling ipv4_update_pmtu()
and ipv4_redirect(), the helpers used when the quoted packet did not
originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in a FNHE being created or updated in the cache that the
attacker can observe.
Pass an oif of 0, in a similar fashion to icmp_err(). This is also the
oif used by the socket path for sockets that are not bound to a device.
Note that this does not allow attackers to create FNHEs that they could
not create before, as both helpers can already be reached with little to
no validation. For example, by sending an ICMP error that quotes an ICMP
Echo Reply or one that quotes a UDP source port that matches a wildcard
socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ipv4_sk_update_pmtu() /
ipv4_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the FNHE cache of the nexthop resolved by the no socket helpers and
another in the FNHE cache of the nexthop used by the socket. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Disable device buffer exporting
Device buffers are never intended to be exported. Disable exporting
support explicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE
open_tree(OPEN_TREE_NAMESPACE) creates a new mount namespace from a
copy of the tree at the given path. The caller needs to be privileged
over its current user namespace because the new mount namespace will be
owned by it. It doesn't need to be privileged over the mount namespace
the tree is copied from. An unprivileged user just needs to create a
user namespace first.
The copy follows the rules of a detached bind mount. Without
AT_RECURSIVE only the mount itself is cloned and its children are left
out. With AT_RECURSIVE unbindable mounts are skipped. Both is fine when
the caller has privileges over the source mount namespace because it
could unmount those mounts anyway. Not so for an unprivileged user in
that mount namespace. For them a mount namespace copy is what unshare()
does. copy_mnt_ns() copies everything including unbindable mounts and
lock_mnt_tree() makes sure nothing can be unmounted in the copy. Nothing
that was covered gets revealed.
create_new_namespace() only does the locking and so the covered content
is right there in the new mount namespace:
# mount -t tmpfs none /tmp/otn; mkdir /tmp/otn/covered
# echo hidden > /tmp/otn/covered/under.txt
# mount -t tmpfs none /tmp/otn/covered
uid 1000, after unshare(CLONE_NEWUSER):
fd = open_tree(AT_FDCWD, "/tmp/otn", OPEN_TREE_NAMESPACE);
setns(fd, CLONE_NEWNS);
open("/covered/under.txt", O_RDONLY) -> "hidden"
Covering paths with mounts is how container runtimes mask parts of
/proc and /sys and how admins hide things.
When the caller's user namespace doesn't own the source mount namespace
copy the way unshare() does and refuse a non-recursive copy of a mount
that has anything mounted below the requested directory and copy
unbindable mounts in a recursive copy. A caller that is privileged over
the source mount namespace sees no change. |
| The Otter Blocks WordPress plugin before 3.2.8 does not enforce its block visibility conditions when a published post is rendered through the WordPress REST API, allowing unauthenticated users to read block content that the site owner restricted to specific roles, logged-in users, the post author, categories or tags, or (on the Pro tier) Stripe purchasers. |
| The GeoDirectory WordPress plugin before 2.8.194 does not perform status, ownership or password checks when loading listings for one of its unauthenticated AJAX handlers, allowing unauthenticated users to disclose the content of non-public (draft, pending and private) listings by supplying their IDs. |
| The GeoDirectory WordPress plugin before 2.8.194 does not perform any status or ownership check when rendering a listing's map-popup through one of its single-item REST routes, allowing unauthenticated users to read the title, permalink and card fields of non-public (draft, pending, private and trashed) listings by supplying the listing ID. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits()
When skb_copy_and_csum_bits() reaches unreadable frags it returns 0
after copying only the linear part, and the rest of the caller's buffer
is left as it was. The callers copy into a buffer that is about to go
out on the wire: an ICMP error quoting the offending packet, or a
driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer
is zeroed beforehand, so whatever was in memory there gets sent.
Zero the part of the buffer we didn't fill. The checksum usually
won't match the data any more, so the receiver will usually drop the
packet, but either way it no longer carries anything it shouldn't.
Only zero for a positive @len, a negative one from a broken caller must
not turn into a huge memset(). |
| Vulnerability in the PeopleSoft Enterprise FIN Common Objects Argentina product of Oracle PeopleSoft (component: Integration). The supported version that is affected is 9.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via Oracle Net to compromise PeopleSoft Enterprise FIN Common Objects Argentina. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise FIN Common Objects Argentina accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the PeopleSoft Enterprise FIN Common Objects Brazil product of Oracle PeopleSoft (component: eProcurement). The supported version that is affected is 9.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise FIN Common Objects Brazil. Successful attacks of this vulnerability can result in unauthorized read access to a subset of PeopleSoft Enterprise FIN Common Objects Brazil accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Oracle Mobile Field Service product of Oracle E-Business Suite (component: Admin UI). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Mobile Field Service. Successful attacks of this vulnerability can result in takeover of Oracle Mobile Field Service. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Siebel CRM Deployment product of Oracle Siebel CRM (component: Server Infrastructure). Supported versions that are affected are 17.0-26.9. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Siebel CRM Deployment. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Siebel CRM Deployment accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| Discourse is an open-source discussion platform. Prior to 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9, sites with secure uploads enabled did not reconcile existing upload security metadata when a previously public category became read-restricted or when category permissions changed during a bulk import. Media and attachments uploaded while the category was public retained a public accessibility flag and remained reachable by anonymous users through their short upload URLs, including uploads associated with deleted topics. This issue is fixed in versions 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: udp: Create exceptions before socket matching
Currently, when ICMPv6 Packet Too Big and Redirect Message packets are
locally delivered and quote a UDP packet, an exception is only created
in the IPv6 exception cache if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the exception cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and
commit a00df2caffed ("ipv6: make exception cache less predictible") tried
to mitigate such attacks by making it harder for attackers to discover
hash collisions in the exception cache and by randomizing the number of
exceptions a hash bucket can hold, respectively. Unfortunately, both of
the mitigations can be bypassed.
Instead, mitigate such attacks by always creating an exception, even
before trying to find a matching socket. Do that by calling
ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted
packet did not originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in an exception being created or updated in the cache that
the attacker can observe.
Pass the ifindex of the ingress device and the default uid, in a similar
fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any
nexthop in ip6_redirect_nh_match() and no exception would be created in
response to a Redirect Message.
Note that this does not allow attackers to create exceptions that they
could not create before, as both helpers can already be reached with
little to no validation. For example, by sending an ICMPv6 error that
quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that
matches a wildcard socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ip6_sk_update_pmtu() /
ip6_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the exception cache of the nexthop resolved by the no socket helpers
and another in the exception cache of the nexthop used by the socket. |
| A sensitive information disclosure vulnerability in the command line interface of AOS-10 could allow an unauthenticated remote attacker to access sensitive information. Successful exploitation could allow an attacker to retrieve information which could be used to potentially gain further access to network services supported by AOS-10. |
