Export limit exceeded: 415623 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 29711 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (29711 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-113078 | 1 Google | 1 Chrome | 2026-10-26 | 9.6 Critical |
| Improper input validation in Compositing in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-110938 | 1 Eclipse | 1 Eclipse Openj9 | 2026-10-26 | N/A |
| In Eclipse OpenJ9 versions up to 0.63.0, the JITServer component is vulnerable to denial of service due to improper boundary checks during protocol message and reply handling. An unauthenticated remote attacker or malicious JITServer can transmit malformed network payloads that cause out-of-bounds heap reads, immediately crashing the JITServer daemon or client JVM process via a segmentation fault (SIGSEGV). | ||||
| CVE-2026-107091 | 2026-10-26 | N/A | ||
| An issue in HUION Inspiroy Frego S (L310) Windows Driver 20.0.1.118 allows a local attacker to execute arbitrary code via the HUION driver installer DLL-loading logic | ||||
| CVE-2026-99091 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix status of pending commands flushed on power off cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status. commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged. In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost. Pass the status the callers set. This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success. Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after. | ||||
| CVE-2026-116282 | 1 Kameleo | 1 Kameleo | 2026-10-26 | 4.3 Medium |
| A security flaw has been discovered in Kameleo up to 5.3.1. Affected by this issue is the function CookieController.ListCookies of the file client-engine-application/w.cs of the component Cookie Controller. The manipulation of the argument guid results in information disclosure. The attack can be executed remotely. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-109341 | 1 Surrealdb | 1 Surrealdb | 2026-10-26 | 7.1 High |
| SurrealDB before 3.3.0 contains an authorization bypass vulnerability that allows callers with table-level write permission to read SELECT-restricted fields by resolving JSON Patch pointers against the unreduced record. Attackers can use PATCH copy or move operations to copy hidden fields into readable destinations, or abuse test mismatch errors as a disclosure oracle. | ||||
| CVE-2026-15044 | 1 Redhat | 1 Openshift Ai | 2026-10-26 | 6.3 Medium |
| A flaw was found in the TrustyAI Service Operator. When deploying services like gorch or NemoGuardrails, if a specific security setting is not enabled, these services can expose their communication channels without requiring users to prove their identity. This allows any other program within the cluster to access the AI guardrails and orchestrator without proper authorization. An attacker could exploit this to gain unauthorized access to sensitive information and potentially make limited changes to the AI models. | ||||
| CVE-2013-10077 | 1 Octoprint | 1 Octoprint | 2026-10-26 | 5.3 Medium |
| A weakness has been identified in OctoPrint 1.0.0. This impacts the function getSettings of the file src/octoprint/server/ajax/settings.py of the component API Key Handler. This manipulation causes information disclosure. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 1.1.0-rc1 will fix this issue. Patch name: eccc9d6fbde0c46cdd6e255fd5ce9a30077ba954. You should upgrade the affected component. Affected is a 2013 release where access control was not yet implemented and the endpoint was part of first-run setup). The API key has been admin-gated since 1.2.0 and GET /api/settings is protected by Permissions.SETTINGS_READ plus reauthentication in all current releases. | ||||
| CVE-2026-110870 | 1 Nodemailer | 1 Nodemailer | 2026-10-26 | 5.3 Medium |
| Nodemailer from 3.0.0 before 10.0.13 contains an improper input validation vulnerability in its address parser that fails to strip RFC 5322 comments inside angle-bracket addresses. Attackers can supply recipients like a display name with a parenthesized comment in the domain, so illegal characters reach envelope.to and RCPT TO, causing rejected delivery or parser interpretation conflicts that bypass domain allow-lists. | ||||
| CVE-2026-105895 | 1 Adobe | 2 Adobe Experience Manager, Experience Manager | 2026-10-26 | 9.9 Critical |
| Adobe Experience Manager is affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user, potentially gaining elevated access or control over the victim's account or session. Exploitation of this issue does not require user interaction. Scope is changed. | ||||
| CVE-2026-82943 | 2026-10-26 | 6.5 Medium | ||
| SOEM version 2.0.0 and earlier contains vulnerabilities where a malicious device can send messages that cause the master to read data from memory locations beyond the intended buffer. The software uses length values from device responses without validating them against actual buffer sizes. An attacker can exploit this to extract up to 64KB of data from the master's memory. | ||||
| CVE-2026-99077 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: udp: Create exceptions before socket matching Currently, when ICMP Fragmentation Needed and Redirect Message packets are locally delivered and quote a UDP packet, a FIB nexthop exception (FNHE) is only created if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the FNHE cache in order to discover the ephemeral port used by a connected UDP socket. Commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in fnhe_hashfun()") and commit 67d6d681e15b ("ipv4: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the FNHE cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating a FNHE, even before trying to find a matching socket. Do that by calling ipv4_update_pmtu() and ipv4_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) from an off-path attacker will always result in a FNHE being created or updated in the cache that the attacker can observe. Pass an oif of 0, in a similar fashion to icmp_err(). This is also the oif used by the socket path for sockets that are not bound to a device. Note that this does not allow attackers to create FNHEs that they could not create before, as both helpers can already be reached with little to no validation. For example, by sending an ICMP error that quotes an ICMP Echo Reply or one that quotes a UDP source port that matches a wildcard socket. Also note that in the good case (matched socket) the above scheme comes at the cost of an extra route lookup, as the no socket helpers perform their own lookup before the one performed by ipv4_sk_update_pmtu() / ipv4_sk_redirect(). When the two resolve to different nexthops, it also results in two exceptions being created for the same destination IP. One in the FNHE cache of the nexthop resolved by the no socket helpers and another in the FNHE cache of the nexthop used by the socket. | ||||
| CVE-2026-106626 | 1 Adobe | 3 Adobe Experience Manager, Experience Manager, Experience Manager Cloud Service | 2026-10-26 | 9.1 Critical |
| Adobe Experience Manager is affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. An attacker with high privileges could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. | ||||
| CVE-2026-116284 | 1 Kameleo | 1 Kameleo | 2026-10-26 | 4.3 Medium |
| A security vulnerability has been detected in Kameleo up to 5.3.1. This vulnerability affects unknown code of the file /general/user-info of the component Local API. Such manipulation leads to information disclosure. The attack may be performed from remote. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-116283 | 1 Kameleo | 1 Kameleo | 2026-10-26 | 4.3 Medium |
| A weakness has been identified in Kameleo up to 5.0.1.26. This affects an unknown part of the file /profiles of the component Local API. This manipulation causes information disclosure. The attack is possible to be carried out remotely. Upgrading to version 5.2.0 is able to mitigate this issue. Upgrading the affected component is advised. | ||||
| CVE-2026-116281 | 1 Kameleo | 1 Kameleo | 2026-10-26 | 3.3 Low |
| A vulnerability was identified in Kameleo up to 5.0.1.26. Affected by this vulnerability is the function ListProfiles of the file client-engine-application/t.cs of the component Profile Controller. The manipulation leads to information disclosure. The attack can only be performed from a local environment. Upgrading to version 5.2.0 addresses this issue. Upgrading the affected component is recommended. | ||||
| CVE-2026-115594 | 2026-10-26 | 6.5 Medium | ||
| Insertion of Sensitive Information Into Sent Data vulnerability in David Lingren Media LIbrary Assistant media-library-assistant allows Retrieve Embedded Sensitive Data.This issue affects Media LIbrary Assistant: from n/a through 3.42. | ||||
| CVE-2026-111976 | 1 Wordpress-extensions | 1 Givewp | 2026-10-26 | 5.3 Medium |
| The GiveWP WordPress plugin before 4.19.0.1 does not perform any status or capability check when rendering a donation form on a public front-end route, allowing unauthenticated visitors to view the content and settings of unpublished (draft, pending, private and scheduled) donation forms that WordPress core otherwise keeps non-public. | ||||
| CVE-2026-101259 | 1 Apache | 2 Apache Camel, Camel | 2026-10-26 | 5.3 Medium |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CoAP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2. When the CoAP consumer could not build its response once the route had completed, CamelCoapResource caught the resulting exception and sent its message back to the CoAP client as the payload of a 5.00 Internal Server Error response. The typical case is a type conversion failure: the consumer converts the final message body to the byte[] payload, and the CamelCoapMaxAge and CamelCoapETag headers to their types, after the route has returned, and therefore outside the route's error handler. On the affected releases the message of such a failure names the class of the value being converted, carries the value's string form, and ends with the class name and message of the underlying cause, so a remote CoAP client could read internal detail about the deployment: class and package names, the string form of the value, such as the path of a file body, and whatever the cause carries, which in practice can include paths, host names and connection detail of a backend. The consumer had no option to suppress this, unlike the HTTP consumers, which offer a muteException option for that purpose. The exception raised by a failing route was not sent: the consumer did not check whether the exchange had failed, and answered a route failure with 2.05 Content and whatever body the message held at that point. Reaching the disclosure therefore requires a route whose completed response a remote client can make unconvertible, which depends on how the route is written. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. The upgrade is enough on its own: the new muteException consumer option defaults to true on all three fixed release lines, so the error response carries no payload without any configuration change. For deployments that cannot upgrade immediately, make sure the response can always be built once the route has completed: convert the body to byte[] or String as the last step of each route that consumes from a coap endpoint, for example with convertBodyTo, give the CamelCoapMaxAge and CamelCoapETag headers only values of their own types, and add an onException handler that marks the failure as handled and sets the response body explicitly, so that a conversion failure is raised and replaced inside the route rather than in the consumer. | ||||
| CVE-2026-111974 | 1 Wordpress-extensions | 1 Givewp | 2026-10-26 | 5.3 Medium |
| The GiveWP WordPress plugin before 4.19.0.1 does not restrict the currency of a donation to the one the site or form accepts, while comparing its amount limits as bare numbers, allowing unauthenticated users to make donations below a form's configured minimum or fixed amount. | ||||