Export limit exceeded: 419441 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 419441 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 419441 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 419441 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 419441 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 419441 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (419441 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99244 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: pid_namespace: prevent TIF_NOTIFY_SIGNAL from interrupting the reaper Since commit 7fea700e04bd ("zap_pid_ns_processes: clear TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING") zap_pid_ns_processes() clears TIF_NOTIFY_SIGNAL before every kernel_wait4() call. Otherwise kernel_wait4() doesn't sleep and returns -ERESTARTSYS if signal_pending() is true and the reaper busy-waits. But clearing TIF_NOTIFY_SIGNAL doesn't fix it. It can get raised again. For example, klp_send_signals() sets it raw against any task that hasn't transitioned yet. And it keeps sending it until the livepatch finishes. The sleep loop waiting for pid_allocated to drop has the same problem and it doesn't even clear anything. So a schedule() in TASK_INTERRUPTIBLE returns immediately. Use a no_notify_signal guard. signal_pending() will ignore TIF_NOTIFY_SIGNAL and the pid namespace reaper sleeps until a child exits or free_pid() wakes it. | ||||
| CVE-2026-99238 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Hold trace_types_lock when updating modules in persistent instances trace_module_record() walks ftrace_trace_arrays from the module notifier without trace_types_lock. A concurrent rmdir of an instance removes it from the list and frees it under that lock, so a module load or unload can walk into a freed trace_array. | ||||
| CVE-2026-99236 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Reject incomplete event filter expressions A non-empty expression normally finishes in predicate_parse()'s inner loop, which resolves the pending logical operators before jumping to finalization. If the input ends after an operator, possibly followed by unary '!' tokens, the outer loop instead falls through with unresolved operator state. For example, "common_pid == 1 || common_pid == 2 &&" leaves prog[0].target equal to -1. The second pass then reads prog[-1] before the forward-jump check can reject it. Depending on adjacent slab contents, it can also copy an out-of-bounds word into a branch target that passes the forward-only check. A self-targeted perf tracepoint counting event can reach this path through PERF_EVENT_IOC_SET_FILTER. Reject the outer-loop fallthrough when a predicate has already been parsed. This ensures that non-empty expressions only reach finalization after the inner loop has resolved their operators. Keep the existing no-filter error for input that has no predicates. Add a regression test for trailing logical operators and unary negations. | ||||
| CVE-2026-99234 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Unregister field variable histograms when the command fails An action that names a field on another event needs that field as a variable, so create_field_var_hist() registers a second hist trigger on that event to provide it, and records it in target_hist_data->field_var_hists[]. If a later part of the same command fails, create_actions() returns an error and event_hist_trigger_parse() jumps to out_free. The write fails with -EINVAL and sched_switch gets no trigger, but: # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> \ events/sched/sched_waking/trigger # echo 'my_synth u64 lat; int a; int b' >> synthetic_events # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\ onmatch(sched.sched_waking).my_synth($wakeup_lat,prio,nosuchfld)'\ >> events/sched/sched_switch/trigger # cat events/sched/sched_waking/trigger hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active] hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active] The second histogram is the one created for 'prio'. It is still active and still counting. out_free reaches destroy_field_var_hists(), which frees the field_var_hists[] entries, but never unregister_field_var_hists(), which is what removes the triggers and runs only from event_hist_trigger_free(). The entry is freed and the trigger is left with nothing tracking it. Unregister the field variable histograms in out_free as well, and record each one as soon as its trigger is registered rather than after the lookup that follows it, so no exit can leave a registered trigger untracked. The entry then belongs to field_var_hists[] and is released by destroy_field_var_hists(), so freeing it on that exit would be a double free. | ||||
| CVE-2026-99232 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing/syscalls: Use copy_from_user for the faultable syscall buffer syscall_copy_user_array() copies the buffer argument of faultable syscalls (write, pwrite64, ...) with __copy_from_user(), which skips access_ok(). Use copy_from_user() instead so a non-user address is rejected and the entry is recorded as faulted. It could be a security concern for machines that trust perf a bit too much. | ||||
| CVE-2026-99230 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/cmd: don't leave list poison in ->hash_node io_uring_cmd_del_cancelable() uses hlist_del() to take a command off ->cancelable_uring_cmd, which leaves LIST_POISON1/2 behind in ->hash_node. Requests are recycled through the request cache without being reinitialised, and not every user of ->hash_node sets it up before it is used: If a vectored futex wait is woken while futex_wait_multiple_setup() is still queueing the futexes, io_futexv_wait() doesn't add the request to ->futex_list, and leaves the completion to the task_work queued by the wake up. io_futexv_complete() ends in __io_futex_complete(), whose hlist_del_init() is fine for a request that is unhashed, which is how all other users of the node leave it. If the request was a cancelable uring_cmd in its previous life, e.g. a ublk FETCH_REQ, it writes through LIST_POISON2: Oops: general protection fault, probably for non-canonical address KASAN: maybe wild-memory-access in range [0xdead000000000120-...] RIP: 0010:io_futexv_complete+0x219/0x420 Call Trace: tctx_task_work_run+0x804/0x950 tctx_task_work+0x71/0xa0 task_work_run+0x118/0x200 Leave the node unhashed. | ||||
| CVE-2026-99229 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/wait: don't spin on a stuck overflow list As long as IO_CHECK_CQ_OVERFLOW_BIT is set, io_cqring_wait_schedule() returns right away, before it gets to look at signals or arms the timeout, for io_cqring_wait() to flush the overflow list. If that doesn't empty the list, and the CQ ring doesn't hold the number of events the caller wants, the loop starts over, with the same result. The task spins in the kernel, and can't be killed. The assumption is that this can't happen: if CQEs can't be flushed, the ring is full, and min_events is capped to the size of the ring. But: - With IORING_SETUP_CQE_MIXED a 32b CQE needs two contiguous entries. It is stuck on the list if a single one is free, and then the ring holds less than cq_entries events. A single threaded application that asks for as many events as the ring has entries never gets out of io_uring_enter(). - Whether the ring is full is up to the CQ head, which the application can write to. While one thread waits for events on an empty ring, another one can move the head back so that the ring looks full and have a CQE overflow. The waiter can't be stopped any more, not even by SIGKILL. Only the application can make room in the CQ ring. Return to it if the list could not be flushed. | ||||
| CVE-2026-99228 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: don't lose the signal that ends work When a thread exits, only its tracked requests are cancelled. Then its io-wq is torn down. io_wq_exit_workers() signals every worker, to get it out of an interruptible sleep, and waits for all of them to exit. Before they do, they go through the work that is left. Unbounded work is cancelled. Bounded work is run, as it is expected to end by itself. Not all of it does. An open has no file yet, so it counts as bounded, and the open of a FIFO waits for the other end. That is what the signal is for. But the workers are signalled once, and a worker that hasn't started the work by then loses the signal: io_wq_exit_workers() io_worker_handle_work() io_wq_worker_wake() set TIF_NOTIFY_SIGNAL io_assign_current_work() io_run_task_work() clear TIF_NOTIFY_SIGNAL io_wq_submit_work() fifo_open() wait_for_partner() wait_for_completion_timeout() The thread never gets out of do_exit(): IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC exit of the thread that has submitted it hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is killed. Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT set. The bit is set before the workers are signalled, and it is tested after the flag has been cleared, with clear_notify_signal() providing the barrier. So either the flag stays, or the bit is seen. Work that is started while the io-wq exits is treated like work that is being run at that time: it isn't interrupted unless it waits interruptibly. | ||||
| CVE-2026-99222 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: keys: Protect the read method check against type removal keyctl_read_key() checks key->type->read without holding key->sem. A reference keeps the key alive, but does not pin the module containing its type. A surviving RxRPC key can therefore be read while AF_RXRPC is being unloaded: KEYCTL_READ task Module unload and key GC ---------------- ------------------------ lookup_user_key() permission / possession checks load key->type af_rxrpc_exit() unregister_key_type() GC: down_write(key->sem) GC: retype to key_type_dead GC: up_write(key->sem) unregister_key_type() returns free_module() read saved type's read member The final access can read freed module storage. The read invocation in __keyctl_read_key() is already protected by key->sem, but the earlier method check is outside that critical section. Move the method check into __keyctl_read_key(), after key_validate() and under its existing read hold on key->sem. The check and invocation then use the same protected type for length queries and every read retry. The GC cannot retype the key until the semaphore is released, and type unregistration waits for that GC pass before the module can be freed. Return -EOPNOTSUPP when validation succeeds and the type has no read method. A temporary buffer may now be allocated before this result; allocation and copying to userspace remain outside the semaphore. | ||||
| CVE-2026-99220 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: asymmetric_keys: reject trust keys without IDs The PKCS#8 parser deliberately leaves the asym_key_ids payload slot empty. key_or_keyring_common() unconditionally dereferences that slot when a PKCS#8 key is supplied to a key_or_keyring restriction. Both the plain and :chain forms reach this branch, allowing an unprivileged caller to trigger a NULL pointer dereference through KEYCTL_RESTRICT_KEYRING followed by add_key(). Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:key_or_keyring_common (crypto/asymmetric_keys/restrict.c:205 crypto/asymmetric_keys/restrict.c:279) Call Trace: <TASK> __key_create_or_update (security/keys/key.c:884) key_create_or_update (security/keys/key.c:1021) __do_sys_add_key (security/keys/keyctl.c:134) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Kernel panic - not syncing: Fatal exception Reject an asymmetric restriction key without key IDs. A PKCS#8 private key cannot identify the signer of a candidate certificate and is not a valid trust anchor. | ||||
| CVE-2026-90724 | 1 Dell | 1 Powerprotect Data Domain Management Center | 2026-11-03 | 2.7 Low |
| Dell PowerProtect Data Domain Management Center, Feature Release versions 7.7.1.0 through 8.8, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. | ||||
| CVE-2026-86401 | 1 Dell | 1 Powerprotect Data Domain Management Center | 2026-11-03 | 2.7 Low |
| Dell PowerProtect Data Domain Management Center, Feature Release versions 7.7.1.0 through 8.8, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Information exposure. | ||||
| CVE-2026-77800 | 1 Zohocorp | 1 Manageengine Key Manager Plus | 2026-11-03 | 7.7 High |
| ManageEngine Key Manager Plus versions before 7151 are vulnerable to a SAML authentication bypass that allows attackers to log in using SAML assertions meant for another service provider. | ||||
| CVE-2026-63499 | 2026-11-03 | N/A | ||
| zt-zip is a Java library that provides convenience methods for ZIP archive manipulation. Prior to 1.18.1, ZipUtil.unpack(...) can apply stored ZIP-entry permissions to the extraction output directory when an entry name such as / or ./ resolves to that directory itself. Because the path traversal checks permit self-referencing entries that do not escape the destination, the unpacker's permission-handling path can replace restrictive output-directory permissions with attacker-supplied permissions. This affects applications that unpack untrusted ZIP files, and POSIX systems demonstrate the issue directly, while ZTFilePermissionsUtil.fetchDefaultStrategy provides fallback permission handling on other supported systems. This issue is fixed in version 1.18.1. | ||||
| CVE-2026-63470 | 2026-11-03 | N/A | ||
| fastapi-code-generator creates FastAPI applications from OpenAPI files. Prior to 0.8.1, the generator inserts Operation.summary into a generated route-handler docstring as a triple-double-quoted string without escaping embedded triple quotes. An attacker-controlled or attacker-influenced operation summary can close the docstring and inject a valid Python expression statement into the handler body. Syntax-breaking input only causes generation to fail, but syntactically valid generated code executes with the server process's privileges when the affected route handler is called. This call-time route-handler docstring sink is distinct from the project's separate import-time route-path and additional-response-key sinks. This issue is fixed in version 0.8.1. | ||||
| CVE-2026-63198 | 2026-11-03 | 7.3 High | ||
| traQ is a messenger application built for Digital Creators Club traP. Prior to 3.28.3, OAuth2 silent authorization requests using prompt=none with an empty or omitted scope parameter check prior consent against the empty requested scope set even though all scopes registered for the client become eligible for issuance. An attacker who controls an OAuth client capable of receiving authorization codes can target a user who previously consented to only some client scopes and obtain an access token containing broader registered scopes without additional consent. A user who has never consented to the client still receives consent_required. This issue is fixed in version 3.28.3. | ||||
| CVE-2026-4052 | 1 Wso2 | 5 Api Control Plane, Api Manager, Wso2 Api Control Plane and 2 more | 2026-11-03 | 9.8 Critical |
| This issue only impacts deployments where WSO2 Identity Server is configured as a Resident Key Manager with database sharing. In such environments, a self-registered user may gain access to the System REST APIs of WSO2 API Manager by obtaining a token from the WSO2 Identity Server token endpoint. | ||||
| CVE-2026-44266 | 2026-11-03 | 9.8 Critical | ||
| Elo is a purely functional expression language for no-code tools. Prior to 1.0.1, the Ruby backend in src/compilers/ruby.ts embeds attacker-controlled text in Ruby double-quoted strings without escaping #, so Ruby interpolation forms in the string-literal emitter or the labelled subtype-constraint branch become executable Ruby. The affected entry points include the /try playground with the Ruby target, bin/eloc -t ruby -x, and defaultFormats.elo.parse() followed by Ruby emission. A failing labelled subtype constraint evaluates its message, while an ordinary string literal is evaluated when the compiled Ruby runs, allowing Ruby code and shell command execution through backticks. JavaScript, Python, and SQL emission are not affected by this Ruby-specific path. This issue is fixed in version 1.0.1. | ||||
| CVE-2026-16900 | 1 Zohocorp | 3 Eventlog Analyzer, Log360, Manageengine Eventlog Analyzer | 2026-11-03 | 7.5 High |
| Zohocorp ManageEngine Log360 and EventLog Analyzer versions 13071 and below are vulnerable to an authentication bypass in local collector registration, allowing unauthenticated actor to register a local collector by sending a specially crafted registration request. | ||||
| CVE-2026-13594 | 1 Zohocorp | 3 Eventlog Analyzer, Log360, Manageengine Eventlog Analyzer | 2026-11-03 | 9.1 Critical |
| Zoho Corporation's ManageEngine Log360 and EventLog Analyzer versions 13062 and below are vulnerable to an issue that could allow an adversary to gain unauthorized access to the product. | ||||