Export limit exceeded: 420535 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 16349 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16349 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-20496 | 1 Cisco | 2 Sd-wan Vedge Cloud, Sd-wan Vedge Router | 2026-04-15 | 6.1 Medium |
| A vulnerability in the UDP packet validation code of Cisco SD-WAN vEdge Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to incorrect handling of a specific type of malformed UDP packet. An attacker in a machine-in-the-middle position could exploit this vulnerability by sending crafted UDP packets to an affected device. A successful exploit could allow the attacker to cause the device to reboot, resulting in a DoS condition on the affected system. | ||||
| CVE-2025-48518 | 1 Amd | 9 Radeon Pro V710, Radeon Pro W7000 Series, Radeon Rx 7000 Series and 6 more | 2026-04-15 | N/A |
| Improper input validation in AMD Graphics Driver could allow a local attacker to write out of bounds, potentially resulting in loss of integrity or denial of service. | ||||
| CVE-2024-34776 | 2026-04-15 | 4.5 Medium | ||
| Out-of-bounds write in some Intel(R) SGX SDK software may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-55118 | 1 Bmc | 1 Control-m/agent | 2026-04-15 | 8.9 High |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured. The issue occurs in the following cases: * Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n"; * Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" | ||||
| CVE-2024-1848 | 2026-04-15 | 7.8 High | ||
| Heap-based Buffer Overflow, Memory Corruption, Out-Of-Bounds Read, Out-Of-Bounds Write, Stack-based Buffer Overflow, Type Confusion, Uninitialized Variable, Use-After-Free vulnerabilities exist in the file reading procedure in SOLIDWORKS Desktop on Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted CATPART, DWG, DXF, IPT, JT, SAT, SLDDRW, SLDPRT, STL, STP, X_B or X_T file. | ||||
| CVE-2025-4640 | 2026-04-15 | N/A | ||
| Out-of-bounds Write vulnerability in PointCloudLibrary pcl allows Overflow Buffers. Since version 1.14.0, PCL by default uses a zlib installation from the system, unless the user sets WITH_SYSTEM_ZLIB=FALSE. So this potential vulnerability is only relevant if the PCL version is older than 1.14.0 or the user specifically requests to not use the system zlib. | ||||
| CVE-2025-4422 | 1 Insyde | 1 Insydeh2o | 2026-04-15 | 8.2 High |
| The vulnerability was identified in the code developed specifically for Lenovo. Please visit "Lenovo Product Security Advisories and Announcements" webpage for more information about the vulnerability. https://support.lenovo.com/us/en/product_security/home | ||||
| CVE-2025-4421 | 1 Insyde | 1 Insydeh2o | 2026-04-15 | 8.2 High |
| The vulnerability was identified in the code developed specifically for Lenovo. Please visit "Lenovo Product Security Advisories and Announcements" webpage for more information about the vulnerability. https://support.lenovo.com/us/en/product_security/home | ||||
| CVE-2024-36274 | 2026-04-15 | 6.5 Medium | ||
| Out-of-bounds write in the Intel(R) 800 Series Ethernet Driver for Intel(R) Ethernet Adapter Complete Driver Pack before versions 29.1 may allow an unauthenticated user to potentially enable denial of service via adjacent access. | ||||
| CVE-2023-47282 | 2026-04-15 | 3.9 Low | ||
| Out-of-bounds write in Intel(R) Media SDK all versions and some Intel(R) oneVPL software before version 23.3.5 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2024-36324 | 1 Amd | 25 Amd Ryzen™ Ai 300 Series Processors, Radeon Pro V520, Radeon Pro V620 and 22 more | 2026-04-15 | 8.8 High |
| Improper input validation in AMD Graphics Driver could allow an attacker to supply a specially crafted pointer, potentially leading to arbitrary code execution. | ||||
| CVE-2025-59729 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.8 Medium |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer. If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000. The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer. There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59730 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it. Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution. This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow. process_frame_obj initializes the buffers based on the frame resolution: We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59731 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | N/A |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data. We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-42971 | 2026-04-15 | 4 Medium | ||
| A memory corruption vulnerability exists in SAPCAR allowing an attacker to craft malicious SAPCAR archives. When a high privileged victim extracts this malicious archive, it gets processed by SAPCAR on their system, resulting in out-of-bounds memory read and write. This could lead to file extraction and file overwrite outside the intended directories. This vulnerability has low impact on the confidentiality, integrity and availability of the application. | ||||
| CVE-2025-42940 | 1 Sap | 1 Commoncryptolib | 2026-04-15 | 7.5 High |
| SAP CommonCryptoLib does not perform necessary boundary checks during pre-authentication parsing of manipulated ASN.1 data over the network. This may result in memory corruption followed by an application crash, hence leading to a high impact on availability. There is no impact on confidentiality or integrity. | ||||
| CVE-2025-59732 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that the height and width are divisible by 8. If the height or width of the image is not divisible by 8, the copy loops at [0] and [1] will continue to write until the next multiple of 8. The buffer td->uncompressed_data is allocated in decode_block based on the precise height and width of the image, so the "rounded-up" multiple of 8 in the copy loop can exceed the buffer bounds, and the write block starting at [2] can corrupt following heap memory. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-42877 | 1 Sap | 3 Content Server, Internet Communication Manager, Web Dispatcher | 2026-04-15 | 7.5 High |
| SAP Web Dispatcher, Internet Communication Manager (ICM), and SAP Content Server allow an unauthenticated user to exploit logical errors that lead to a memory corruption vulnerability. This results in high impact on the availability with no impact on confidentiality or integrity of the application. | ||||
| CVE-2024-39840 | 1 Factorio | 1 Factorio | 2026-04-15 | 8.8 High |
| Factorio before 1.1.101 allows a crafted server to execute arbitrary code on clients via a custom map that leverages the ability of certain Lua base module functions to execute bytecode and generate fake objects. | ||||
| CVE-2025-59733 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset. The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels. If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer. We recommend upgrading to version 8.0 or beyond. | ||||