Export limit exceeded: 25952 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25952 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99004 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Size page table preallocation by device address Commit 0a8224058a58 ("drm/imagination: Fix page count for page table for map() interface") passed the device address to pvr_mmu_op_context_create(), but the preallocation is still sized from device_addr + sgt_offset with an exclusive end. The offset into the object's pages has no place in a device-virtual range, and the exclusive end allocates one table too many when the range ends on a table boundary. Count the tables from device_addr and the inclusive end of the range. The new calculation does not take page table indices into account. This fixes another issue with the previous implementation, where the difference between start and end indices could underflow when a mapping crossed a page table boundary. This would lead to the driver preallocating a huge number of MMU pages, exhausting system memory and triggering an out of memory panic. [Alessio: add paragraph to point out OOM bug being fixed, cc stable] | ||||
| CVE-2026-99005 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Unmask interrupts only when ACTIVE is true There is a small race window between intel_rps_boost() reading a stale ACTIVE state and queuing rps->work, where ACTIVE may be changed via asynchronous calls triggered by wakeref drop. This means that rps_work() could be triggered after the GT has been parked, so unmasking RPS PM interrupts would happen without holding PM wakelock. This sequence of events may be observed during live_rc6_ctx_wa() selftest: 1) live_rc6_ctx_wa() -> intel_engine_pm_put() -> wakeref_put() ASYNC1) wakeref_put() callback -> __engine_park() -> intel_gt_pm_put_async() -> intel_gt_pm_put_async_untracked() -> intel_wakeref_put_async() ASYNC2) wakeref_put_async() callback -> __gt_park() -> intel_rps_park() -> intel_rps_clear_active() [clear ACTIVE] WITH INTERRUPTS: -> rps_disable_interrupts() -> cancel_work_sync(rps->work) -> rps_reset_interrupts() [rps->pm_iir = 0] WITHOUT INTERRUPTS (TIMER mode): -> rps_stop_timer() -> cancel_work_sync(rps->work) 2) live_rc6_ctx_wa() -> intel_gt_wait_for_idle() -> intel_gt_retire_requests_timeout() -> dma_fence_wait_timeout() -> ops->wait() [i915_fence_wait()] -> i915_request_wait_timeout() -> intel_rps_boost() -> intel_rps_is_active() [check ACTIVE] [OPEN RACE WINDOW] -> queue_work(rps->work) -> retire_requests() -> i915_request_retire() -> intel_rps_dec_waiters() [from 1 to 0] If ASYNC1 and ASYNC2 would execute during [OPEN RACE WINDOW], then: 3) rps_work() executes from the workqueue and may satisfy "(!pm_iir && !client_boost)" test (in TIMER mode rps->pm_iir is zeroed by an earlier rps_work() call or never gets a new value after previous intel_rps_unpark() event), so it jumps to "out" label, bypassing intel_rps_is_active() guard and executes gen6_gt_pm_unmask_irq(); 4) GT is parked and runtime PM wakelock is dropped, so only a raw reference in __gt_park() -> intel_display_power_put_async() remains for 100ms, then the MMIO write in gen6_gt_pm_unmask_irq() detects missing wakelock via assert_rpm_wakelock_held() and emits "RPM wakelock ref not held during HW access" tainting kernel. Commit 3e7abf814193 ("drm/i915: Extract GT render power state management") dropped the "if (rps->interrupts_enabled)" guard that gen6_pm_rps_work() had around this unmask in i915_irq.c. INTEL_RPS_ACTIVE brackets the same window, since it is set in intel_rps_unpark() before rps_enable_interrupts() and rps_start_timer() and cleared in intel_rps_park() before rps_stop_timer() and rps_disable_interrupts(). Skip unmasking when RPS is no longer active (reaching unmask operation is independent of INTERRUPT mode). This does not prevent RPS operation from resuming on the next unpark. In interrupt mode, intel_rps_unpark() calls rps_enable_interrupts(), which enables and unmasks the PM interrupts. In timer mode, it calls rps_start_timer(), restarting periodic engine-busyness evaluation. The timer generates software RPS events and queues rps_work() directly, independently of PM interrupt delivery. Neither mode requires the late worker to unmask interrupts while the GT is parked (cherry picked from commit ca4a6deadad15b91ee083afe445fa6bdbfb68206) | ||||
| CVE-2026-99008 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown syzbot hit a NULL pointer dereference in rfcomm_dev_shutdown() when an RFCOMM tty is closed. rfcomm_dev_add() puts the new device on rfcomm_dev_list first and only then registers the tty device and saves it in dev->tty_dev. If that registration fails, dev->tty_dev is never set at all. The device can be looked up in the meantime, so an open() of /dev/rfcommN gets through rfcomm_tty_install() and attaches to it. When that tty is closed again, rfcomm_dev_shutdown() uses dev->tty_dev without checking it: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] RIP: 0010:rfcomm_dev_shutdown+0x48/0xb0 net/bluetooth/rfcomm/tty.c:131 Call Trace: tty_port_shutdown+0x1bf/0x220 drivers/tty/tty_port.c:372 tty_port_close+0x4e/0x150 drivers/tty/tty_port.c:705 tty_release+0x359/0x1670 drivers/tty/tty_io.c:1718 __fput+0x418/0xa50 fs/file_table.c:512 rfcomm_dev_destruct() already copes with a NULL dev->tty_dev. Add the same check to rfcomm_dev_shutdown(), so the tty device is only moved when it was actually registered. | ||||
| CVE-2026-99015 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Serialize dead-device detachment Rebinding an HCI socket after its controller is unregistered can race monitor control replay and crash the kernel. hci_sock_bind() clears hci_pi(sk)->hdev and drops the device reference under only the socket lock, whereas send_monitor_control_replay() holds hci_sk_list.lock for reading. Replay can observe a non-NULL hdev, then bind can clear it and drop the last reference before create_monitor_ctrl_open() reads hdev->id. This can cause a NULL pointer dereference if the pointer is reloaded, or a use-after-free if the old pointer is retained. The kernel reported: KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] RIP: 0010:create_monitor_ctrl_open+0x579/0x800 Call Trace: hci_sock_bind+0xd96/0x1190 __sys_bind+0x166/0x200 __x64_sys_bind+0x6d/0xb0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The same missing serialization lets hci_send_to_sock() select a socket for the old device and queue its frame after bind has detached the socket or installed a new binding. Take hci_sk_list.lock for writing when clearing the device pointer and resetting the socket state. This waits for existing replay and delivery readers to finish before detachment and prevents later readers from using the old binding. Keep hci_dev_put() outside the critical section because the final device release can sleep. | ||||
| CVE-2026-98735 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize ACL scheduling with channel deletion hci_chan_sent() selects a channel under RCU but drops the read lock before accessing chan->conn and returning the channel. The ACL and LE schedulers then use its packet queue and update its transmit counters without any protection against channel deletion. After TX selects a channel and releases RCU, a disconnect command timeout on the separate request workqueue can run hci_conn_failed() and l2cap_conn_del(). hci_chan_del() can then unlink the channel, complete synchronize_rcu(), purge its queue and free it before TX resumes. This causes use-after-free both in hci_chan_sent() and in its callers. KASAN reported: BUG: KASAN: slab-use-after-free in hci_chan_sent+0x892/0x9b0 Workqueue: hci0 hci_tx_work Call Trace: hci_chan_sent+0x892/0x9b0 hci_tx_work+0x5e6/0xb70 Allocated by task 91: hci_chan_create+0xe3/0x350 l2cap_conn_add.part.0+0x12/0xa30 l2cap_chan_connect+0x110d/0x1b60 l2cap_sock_connect+0x310/0x530 Freed by task 99: hci_chan_del+0x11f/0x170 l2cap_conn_del+0x4f1/0x800 l2cap_connect_cfm+0x88c/0xd30 hci_conn_failed+0x150/0x250 hci_abort_conn_sync+0x3e3/0x800 hci_cmd_sync_run+0x7e/0xc0 hci_abort_conn+0x105/0x1f0 disconnect_sync+0x157/0x290 hci_cmd_sync_work+0x13c/0x290 Hold the existing device mutex across channel selection and transmission in both schedulers to serialize them with channel teardown. Keep timeout handling outside the critical sections because hci_link_tx_to() acquires the same mutex. This also permits the transmit path to sleep, unlike extending the RCU read-side critical section across packet submission. | ||||
| CVE-2026-98759 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: fix uninitialized typec_partner_desc in cd321x_update_work() cd321x_update_work() passes a stack-allocated typec_partner_desc to typec_register_partner() after initializing only usb_pd, accessory and identity. typec_register_partner() copies attach and deattach from the descriptor into the partner. With those fields left unset, garbage function pointers may be stored and later invoked from typec_partner_link_device() when a USB device is linked to the port. Uninitialized pd_revision and usb_capability similarly leak stack data through partner sysfs. Zero-initialize the descriptor so optional callbacks remain NULL and the remaining fields are zero. | ||||
| CVE-2026-98772 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix port tear down use-after-free Some drivers for multiport devices access port driver data from completion handlers of shared URBs submitted at attach() or first open() and stopped at disconnect() or last close(), respectively. A simple NULL check before accessing the driver data makes sure that a port state container has at least been allocated, but a completion handler can still race with port tear down. Reorder the disconnect handling so that ports are not deregistered (and their driver data freed) until after all ports have been hung up and the driver disconnect() callback has run so that all I/O has been stopped. | ||||
| CVE-2026-98090 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: restore active device pointers after failed sprout btrfs_init_new_device() switches latest_dev and possibly s_bdev from the seed device to the new sprout device before creating the first writable chunks. If chunk creation or the subsequent sprout setup fails, the error path releases the new device without switching those pointers back. btrfs_show_devname() can then dereference the freed latest_dev and crash. Restore the active device pointers to the latest seed device before removing and releasing the failed sprout device. | ||||
| CVE-2026-98091 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: detach failed sprout device from transaction update list When creating the first metadata chunk for a sprout filesystem, create_chunk() adds the new device to the transaction dev_update_list through device->post_commit_list. If the subsequent system chunk creation fails, btrfs_init_new_device() aborts the transaction and releases the device while post_commit_list is still linked. This triggers a warning in btrfs_free_device() and leaves the transaction list referencing freed memory. Detach the device while holding chunk_mutex before releasing it. | ||||
| CVE-2026-98092 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close() acp6x_pdm_dma_close() does not free the runtime->private_data buffer allocated in acp6x_pdm_dma_open(). Add the missing kfree. | ||||
| CVE-2026-98908 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: microchip: sparx5: clean up PSFP resources on flower setup failure sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and stream filter resources before adding VCAP actions. If a later step fails, the resources allocated earlier in the function are not unwound. Add error paths to release the stream filter, flow meter and stream gate when setup fails after they have been acquired. Also make sparx5_psfp_fm_add() return the acquired flow-meter id before the existing-flow-meter early return. When an existing flow meter is reused, sparx5_psfp_fm_get() increments its pool reference count, but the caller previously kept psfp_fmid as 0. If a later setup step failed, the error path could try to delete flow-meter id 0 instead of the reused flow meter, leaving the incremented reference behind. | ||||
| CVE-2026-98916 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: check link is beaconing for color change When trying to do a color change, validate that the link is beaconing first, to avoid calling the driver with an invalid link. | ||||
| CVE-2026-98920 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing alloc tagging of direct mempool allocations Commit 1d78d56c43ef ("netfs: Fix folio_queue ENOMEM in writeback by adding a mempool") added a mempool for the folio_queues and made the request, subrequest and folio_queue allocations distinguish between writeback and everything else. Writeback is part of memory reclaim and must not fail due to ENOMEM, so it allocates under GFP_NOFS through mempool_alloc(), which may dip into the pool's reserve and, if that runs empty, wait for elements to be returned. The GFP_KERNEL paths, which can return -ENOMEM to their callers, invoke the pool's ->alloc() callback directly instead. The direct call, however, skips the alloc_hooks() wrapper that the mempool_alloc() macro provides. The pool callbacks, mempool_alloc_slab() and mempool_kmalloc(), call kmem_cache_alloc_noprof() and kmalloc_noprof() and rely on current->alloc_tag having been set by the caller. With CONFIG_MEM_ALLOC_PROFILING_DEBUG=y this leads to current->alloc_tag not set WARNING: ./include/linux/alloc_tag.h:161 at __alloc_tagging_slab_alloc_hook alloc_tag was not set WARNING: ./include/linux/alloc_tag.h:166 at __alloc_tagging_slab_free_hook at allocation and free time respectively, as reported when reading files on a CIFS mount. The allocations are also missing from /proc/allocinfo. Wrap the direct ->alloc() invocations in alloc_hooks() with a new mempool_alloc_noreserve() helper in include/linux/mempool.h, next to the other alloc_hooks()-wrapped macros such as mempool_alloc(). The GFP_KERNEL paths keep their failable allocation semantics, they just get tagged now. | ||||
| CVE-2026-98937 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Check kernel access when kernel callchains are requested perf_event_open() currently gates perf_allow_kernel() only on !attr.exclude_kernel. However, users can still request kernel callchain collection with attr.exclude_callchain_kernel == 0 even when attr.exclude_kernel == 1. That still requires kernel profiling privilege, but the existing check does not enforce it. Update the permission check to call perf_allow_kernel() when either kernel sampling is requested or kernel callchains are requested. This keeps permission checks aligned with requested data and prevents unprivileged use of kernel callchain capture. | ||||
| CVE-2026-98765 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: dummy-hcd: Fix wait for outstanding request completions The dummy-hcd driver emulates synchronize_irq() by waiting until its private callback_usage counter drops to 0 (with the private lock not held). This counter is incremented whenever a gadget driver callback occurs (which requires the private lock to be dropped), but not when a request completion handler is called. This is an oversight. Request completion is triggered by timer interrupts (emulating device IRQs in a real UDC), and the interrupt handlers are supposed to have completed when the synchronize_irq() emulation routine returns -- they aren't supposed to be in the middle of a completion callback. If this happens it can lead to a gadget driver's unbind routine running before all outstanding request completions have finished, maybe even allowing the gadget driver's module to be unloaded while a completion handler is still running. Fix the oversight by incrementing the callback_usage value across request completion callbacks. | ||||
| CVE-2026-98766 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed-vhub: cancel wake work on device removal wake_work is armed from the gadget .wakeup callback to resume suspended downstream ports, and it is never cancelled in ast_vhub_remove(), so a work item queued before or during removal can run after devm has freed vhub and its ports, a use-after-free. Cancelling the work alone is not sufficient: usb_gadget_wakeup() takes no lock and the unbind path never clears wakeup_en, so a remote-wakeup request in flight on another CPU can re-arm the work after the cancel and before vhub is freed. ast_vhub_del_dev() already clears d->registered under vhub->lock before unregistering the gadget. Refuse the wakeup in ast_vhub_udc_wakeup() once d->registered is clear: the check and the schedule_work() are then atomic against the unbind, so a wakeup that passed before the flag was cleared is drained by the cancel_work_sync() after the del_dev loop, and one that arrives later returns without arming. Also move INIT_WORK() to the top of ast_vhub_probe(), since the probe error path reuses ast_vhub_remove() and would otherwise cancel a never-initialized work item. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98769 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd generic_set_cmd() and generic_get_cmd() use the low nibble of ctrl->bRequest as an index into con->data[]: u8 cmd = (ctrl->bRequest & 0x0F); /* 0 .. 15 */ ... con->data[cmd] = value; /* OOB when cmd >= 5 */ struct usb_audio_control (include/linux/usb/audio.h) declares data as a 5-element array, so indices 5 through 15 write (or read) up to 44 bytes past the end of the array on the heap. A malicious USB host can craft a class-specific SET_CUR / GET_CUR request with an arbitrary bRequest value, triggering the out-of-bounds access from an IRQ completion handler with no further preconditions. Add an ARRAY_SIZE() guard to both functions. | ||||
| CVE-2026-98770 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: Fix the jack descriptor array sizes The jack in/out descriptor arrays in struct f_midi2_usb_config have the size of MAX_CABLES, which look reasonable -- but it turned out to be incorrect. Namely, the entries for those arrays are added from both inputs and outputs, hence for each loop cycle, it adds two, ended up with as twice as the expected size. This inconsistency may result in potential OOB when a large number of jacks are set up via configfs, although the max number of cables (the loop count) is limited to MAX_CABLES. For addressing it, correct the jack_ins & jack_outs array sizes to twice, MAX_CABLES * 2. | ||||
| CVE-2026-98771 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: usb: storage: sierra_ms: reject short SWoC info transfers sierra_get_swoc_info() requests sizeof(struct swoc_info) (60) bytes from the device via usb_control_msg(), but its callers only treat a negative return value as failure. A device that answers the vendor-specific GetSwocInfo request with a short IN transfer is therefore accepted, leaving the tail of the freshly allocated (kmalloc(), non-zeroing) swoc_info buffer uninitialized. truinst_show() subsequently prints swocInfo->rev, swocInfo->LinuxSKU and swocInfo->LinuxVer from that buffer into the world-readable (0444) "truinst" sysfs attribute. An emulated/malicious USB device (VID 0x1199, PID 0x0fff) can exploit this to disclose up to 5 bytes of stale kernel heap memory (kmalloc-64) to unprivileged userspace, once per sysfs read, indefinitely. On kernels built without init_on_alloc this leaks recently freed heap contents. Only accept the transfer when the full structure was received. sierra_ms_init() already retries failed queries, so well-behaved devices are unaffected. | ||||
| CVE-2026-98917 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: parisc: Increase kernel stack size to 32kb For 64-bit Linux kernels, increase the default kernel stack size (THREAD_SIZE_ORDER) to 32 kB, in order to avoid kernel crashes which have been triggered recently when building the debian vtk9 package with gcc 17: stackcheck: kworker/u128:0 will most likely overflow kernel stack (sp:179a83af0, stk bottom-top:179a80000-179a84000) Kernel panic - not syncing: low stack detected by irq handler - check messages CPU: 2 UID: 0 PID: 30760 Comm: kworker/u128:0 Tainted: G W 6.18.46-dirty #1 NONE Tainted: [W]=WARN Hardware name: 9000/800/rp3440 Workqueue: writeback wb_workfn (flush-259:0) Backtrace: [<000000004022f050>] show_stack+0x70/0x90 [<000000004022378c>] dump_stack_lvl+0x124/0x190 [<000000004022382c>] dump_stack+0x34/0x48 [<000000004020212c>] vpanic+0x204/0x648 [<00000000402025c4>] panic+0x54/0x58 [<0000000040232230>] do_cpu_irq_mask+0x3f8/0x440 [<0000000040227070>] intr_return+0x0/0xc | ||||