Export limit exceeded: 25952 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25952 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98955 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: flow_dissector: avoid u16 truncation of skb->len when computing thoff __skb_flow_dissect() computes key_control->thoff using: key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen); min_t(u16, ...) casts both arguments to u16 before comparing them. Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the truncated length wins and thoff is set to a bogus small value, even when the dissection succeeded. For example, an IPv4/TCP frame with skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as skb_probe_transport_header() point the transport header inside the Ethernet header. Such skbs are not exotic: - At the time of commit d0c081b49137 ("flow_dissector: properly cap thoff field"), AF_PACKET with PACKET_VNET_HDR could already build GSO skbs larger than 64KB (MTU checks are skipped for GSO, and alloc_skb_with_frags() accepted up to MAX_SKB_FRAGS (17) order-0 pages on top of the linear part). - BIG TCP now makes skbs larger than 64KB common. - The following patch makes tun_get_user() dissect IFF_TAP frames before eth_type_trans() pulls the Ethernet header, so a GSO frame carrying a 65522..65535 byte L3 packet will be dissected with skb->len in [65536, 65549]. Compare as u32 instead. If the resulting offset cannot be represented in the u16 key_control->thoff, cap it to U16_MAX and report the dissection as failed rather than silently returning a wrong transport offset. thoff is still set on failure, as some callers (such as eth_get_headlen()) use it regardless of the return value. | ||||
| CVE-2026-98957 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: disable rx napi when removing device Unloading the mt7915e module with a MT7916 triggers multiples WARN in __netif_napi_del_locked() and in page_pool_disable_direct_recycling() because the driver does not disable the napi before destroying it. This is troublesome since on MT7916 it is required to unload the module and reinsert it with a different enable_6ghz parameter to change the frequency. The system generally becomes unstable after reinserting the module. Fix it by disabling rx napi inside mt7915e itself, even through napi rx is enabled in the mt76 generic code. Disabling it in the mt76 generic code was previously attempted and reverted because napi was disabled too late and rx handlers could access freed structures. Note that the tx side is enabled and disabled by the mt76 generic code. It is disabled in mt7915_stop_hardware() since, unlike mt7915_unregister_device(), is it also called in the probe path if an error happens after rx napi is enabled. | ||||
| CVE-2026-98906 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: restore RX state on reload failure lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before reallocating the RX resources for the new MTU. If the allocation fails, the restore path puts these fields back before restarting RX. However, the reload path also updates rx->page_order and rx->max_mtu before calling lan966x_fdma_rx_alloc(). These fields are not restored on failure, so RX can be restarted with the old pages, old FDMA state and old page pool, but with the page geometry from the failed new MTU. This can make the XDP path advertise a frame size derived from the new page_order while the actual RX pages still come from the old allocation. For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be called with a frame size larger than the restored RX pages. lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If fdma_alloc_coherent() fails, the new page pool is destroyed, but the rollback path does not restore the per-port XDP RXQ mem model registration either. Save and restore rx->page_order and rx->max_mtu, and restore the old page pool registration for each port's XDP RXQ before RX is started again. This keeps the restored RX state consistent after a failed reload. | ||||
| CVE-2026-98909 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: unregister devlink on port registration failure cpsw_probe() registers devlink before registering the CPSW ports. If cpsw_register_ports() fails, the error path only unregisters the notifiers and then releases the lower level resources. It does not undo the successful cpsw_register_devlink() call, leaving the devlink instance and its parameters registered after probe has failed. Add a devlink cleanup label for the path where devlink registration has already succeeded, and use it when port registration fails. | ||||
| CVE-2026-98910 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Unwind debug trap enable on copy_to_user failure If kfd_dbg_trap_enable() fails while copying runtime_info to userspace, it had already activated the trap, set debug_trap_enabled, taken an extra process reference, and opened the debug event file. Return -EFAULT without unwinding that state, leaving inconsistent trap state and a refcount imbalance that could break later DISABLE/ENABLE. On copy_to_user failure, deactivate the trap and undo the rest of the enable setup before returning. | ||||
| CVE-2026-98912 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Reject reads that cannot fit the next event snd_seq_oss_read() checks whether the next queued OSS sequencer event fits in the remaining userspace buffer before removing it from the read queue. The check is inverted. It currently stops when the event is smaller than the remaining buffer, so a normal 4-byte event is not copied for an 8-byte read buffer. Conversely, an 8-byte event can be copied for a smaller read count. Break only when the remaining userspace buffer is smaller than the next event, and report -EINVAL if no complete event has been copied. This prevents an undersized read from looking like end-of-file while leaving the event queued for a later read with a large enough buffer. | ||||
| CVE-2026-98972 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Don't access cpuset_cgrp_subsys.root in is_in_v2_mode() After seeing the patch [1] to guard is_in_v2_mode() with RCU, it makes me realize that is_in_v2_mode() may be called in a context where a new cgroup filesystem is being rebound with stale cpuset_cgrp_subsys.root pointer. Avoid this potential UaF situation by adding a new cpuset_v2_mode flag which is set when the cpuset_v2_mode mount option is used. This flag is written into only when cpuset_bind() is being called with a stable cpuset_cgrp_subsys.root value. The is_in_v2_mode() helper is modified to read the new cpuset_v2_mode flag instead of accessing cpuset_cgrp_subsys.root directly. [1] https://lore.kernel.org/lkml/20260929084124.626693-2-arighi@nvidia.com | ||||
| CVE-2026-98958 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: account non-AQL frames per peer rather than per link The driver increments wcid->non_aql_packets when a frame goes to the hardware queue. The completion path decrements the counter again. For an MLO peer, the hardware reports the completion on the link that it used for the transmission. This link can differ from the link that the driver queued the frame on. In that case, the increment and the decrement go to different link wcids, and the count drifts upwards until it blocks the station. Keep the count on the wcid of the primary link, like the other peer-wide state. | ||||
| CVE-2026-98960 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't stash io_uring encoded data across -EAGAIN Returning -EAGAIN while leaving btrfs_uring_encoded_data in the cmd PDU leaks if the request is cancelled or the ring exits before reissue. io_uring does not free driver PDU allocations on cleanup. Write: io_queue_sqe() always issues with IO_URING_F_NONBLOCK first, so return -EAGAIN before allocating and free data on every exit. Read: free on nowait -EAGAIN too; only -EIOCBQUEUED keeps the allocation for btrfs_uring_read_finished(). | ||||
| CVE-2026-98961 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: unlock inode and extent in caller when io_uring read extent fails btrfs_uring_read_extent() runs only after btrfs_encoded_read() has taken the inode shared lock and the extent lock. On failure it used to unlock in out_fail, and a pages-array allocation failure returned -ENOMEM without unlocking at all. Unlock in the caller instead on all failure returns, matching the copy_to_user() error path. The deferred -EIOCBQUEUED path still unlocks in btrfs_uring_read_finished(). | ||||
| CVE-2026-98963 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: always return -EIOCBQUEUED after btrfs_uring_read_extent_endio If all bios finish before btrfs_encoded_read_regular_fill_pages() returns, it calls btrfs_uring_read_extent_endio() and previously returned the I/O status. A negative errno then made btrfs_uring_read_extent() unlock and free while btrfs_uring_read_finished() did the same again. Return -EIOCBQUEUED so only the deferred path cleans up. | ||||
| CVE-2026-98966 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix the program leak when XDP is replaced We need to release the reference on the old BPF prog, whether we are going to no-prog, or replacing the prog with another. Spotted by AI while running tests for the propagation series (leaked programs were accumulating). Selftest will come in the net-next series to avoid conflicts. | ||||
| CVE-2026-98970 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Free the BO cache size list on teardown vc4_bo_cache_destroy() purges the cached BOs but never frees the size list, leaking it on every unbind. | ||||
| CVE-2026-98915 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: use vb2_video_unregister_device on driver removal The driver uses vb2_fop_release() as its file release operation, so vb2_video_unregister_device() should be used instead of video_unregister_device() during driver removal. This ensures that the vb2 queue is properly disconnected before the video device is unregistered. | ||||
| CVE-2026-98921 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fix UAF in ovl_do_mkdir() debug print ovl_do_mkdir() prints the input dentry with %pd after vfs_mkdir(). Since commit fe497f0759e0 ("VFS: change vfs_mkdir() to unlock on failure."), vfs_mkdir() calls end_creating() on the input dentry on failure and may replace it on success, so the post-call %pd can use-after-free the dentry when CONFIG_OVERLAY_FS_DEBUG is enabled. Print the dentry before the call and only the result afterward. | ||||
| CVE-2026-98935 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rtc: dev: zero-initialize struct rtc_wkalrm to prevent information leak The struct rtc_wkalrm has padding holes after the 'pending' member. When returned to userspace via the RTC_WKALRM_RD ioctl, uninitialized kernel stack data residing in these holes may be leaked. Zero-initialize the struct at declaration to eliminate this information leak risk. Fixes smatch warnings: - drivers/rtc/dev.c:392 rtc_dev_ioctl() warn: check that 'alarm' doesn't leak information (struct has a hole after 'pending') | ||||
| CVE-2026-98936 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: reset ar->num_stations on hardware start When (multiple) hw restart occurs, we end up in a situation where we cannot accept new stations / mesh peers. This seems to be the 'num_stations' in 'struct ath11k' that did not get reset properly in this case. In ath11k_mac_op_start(), it was indeed the only accounting var that did not get reset so let's clear it too. This avoids problems like those: [1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0 [1248828.088115] Call trace: [1248828.088116] ieee80211_reconfig_stations+0x98/0xc0 (P) [1248828.088119] ieee80211_reconfig+0x774/0x1438 [1248828.088123] ieee80211_restart_work+0x10c/0x178 [1248828.088127] process_one_work+0x178/0x3c0 [1248828.088130] worker_thread+0x280/0x440 [1248828.088133] kthread+0xe0/0xf8 [1248828.088137] ret_from_fork+0x10/0x20 [1248828.088141] ---[ end trace 0000000000000000 ]--- [1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128) [1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: xx:xx:xx:xx:xx:xx for VDEV: 1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2026-98925 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix self-redirect copied_seq double-counting When a BPF stream_verdict program redirects an skb back to the same socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply() calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the skb is then delivered to the socket's psock ingress queue and later read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via the copied_from_self accounting path. This double-counting causes copied_seq to advance by 2x the actual data length, triggering: TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \ rcvnxt BF2E806, fl 0 WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640 Call Trace: tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806 WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0 Call Trace: tcp_recvmsg_locked+0x8d1/0x2640 tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by converting self-redirect verdict to __SK_PASS at the beginning of sk_psock_verdict_apply(). This bypasses the __SK_REDIRECT case entirely (which calls sk_psock_eat_skb), letting the __SK_PASS path queue the skb to the psock ingress queue. The data is then read via tcp_bpf_recvmsg_parser(), which advances copied_seq exactly once through copied_from_self. Cross-socket redirects continue through __SK_REDIRECT with sk_psock_eat_skb() unchanged. | ||||
| CVE-2026-98930 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix IRQ injection with SIGP Stop and Store Status When __inject_sigp_stop() is called for a Stop and Store Status operation, if the vCPU is running, the interrupt is marked as pending and the status is stored by the thread performing the KVM_RUN IOCTL. If the vCPU is already stopped, the status is stored immediately. Storing the status means writing into userspace, which might fault, and __inject_sigp_stop() is called from do_inject_vcpu() which in turn is always called holding a spinlock, which is obviously an issue. Fix this by returning -EWOULDBLOCK from __inject_sigp_stop(), and adding a bool flag to indicate whether a store status is needed. The callers of do_inject_vcpu() are modified to pass the pointer to the bool flag; whenever a Store Status operation is needed, the callers can now perform it outside the spinlock. Opportunistically refactor kvm_s390_set_irq_state() to use scoped_guard() and __free(). [ Added Fixes tag while picking -- Claudio ] | ||||
| CVE-2026-98931 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spinand: fix NULL pointer dereference with no ECC engine When "nand-no-ecc-engine" is set in DT, nanddev_get_ecc_engine() takes the NAND_ECC_ENGINE_TYPE_NONE path and returns success while leaving nand->ecc.engine NULL. The SPI-NAND code nevertheless dereferences it unconditionally to test for a pipelined engine, so probing such a device oopses immediately. Rather than open-coding the test three times, add a nand_ecc_is_pipelined() helper to the NAND core that folds the NULL check into the integration comparison, and use it everywhere. Future callers then cannot reintroduce the problem. | ||||