Export limit exceeded: 24537 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24537 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-7451 | 1 Hgiga | 1 Isherlock | 2026-04-15 | 9.8 Critical |
| The iSherlock developed by Hgiga has an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server. This vulnerability has already been exploited. Please update immediately. | ||||
| CVE-2024-9441 | 1 Nortekcontrol | 1 Emerge E3 Firmware | 2026-04-15 | 9.8 Critical |
| The Linear eMerge e3-Series through version 1.00-07 is vulnerable to an OS command injection vulnerability. A remote and unauthenticated attacker can execute arbitrary OS commands via the login_id parameter when invoking the forgot_password functionality over HTTP. | ||||
| CVE-2025-60803 | 1 Antabot | 1 White-jotter | 2026-04-15 | 9.8 Critical |
| Antabot White-Jotter up to commit 9bcadc was discovered to contain an unauthenticated remote code execution (RCE) vulnerability via the component /api/aaa;/../register. | ||||
| CVE-2025-6104 | 2026-04-15 | 8.8 High | ||
| A vulnerability, which was classified as critical, was found in Wifi-soft UniBox Controller up to 20250506. This affects an unknown part of the file /billing/pms_check.php. The manipulation of the argument ipaddress leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-7723 | 2026-04-15 | N/A | ||
| A command injection vulnerability exists that can be exploited after authentication in VIGI NVR1104H-4P V1 and VIGI NVR2016H-16MP V2.This issue affects VIGI NVR1104H-4P V1: before 1.1.5 Build 250518; VIGI NVR2016H-16MP V2: before 1.3.1 Build 250407. | ||||
| CVE-2025-7724 | 2026-04-15 | N/A | ||
| An unauthenticated OS command injection vulnerability exists in VIGI NVR1104H-4P V1 and VIGI NVR2016H-16MP V2.This issue affects VIGI NVR1104H-4P V1: before 1.1.5 Build 250518; VIGI NVR2016H-16MP V2: before 1.3.1 Build 250407. | ||||
| CVE-2025-6103 | 2026-04-15 | 8.8 High | ||
| A vulnerability, which was classified as critical, has been found in Wifi-soft UniBox Controller up to 20250506. Affected by this issue is some unknown functionality of the file /billing/test_accesscodelogin.php. The manipulation of the argument Password leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-59051 | 1 Freepbx | 1 Endpoint Manager | 2026-04-15 | N/A |
| The FreePBX Endpoint Manager module includes a Network Scanning feature that provides web-based access to nmap functionality for network device discovery. In Endpoint Manager 16 before 16.0.92 and 17 before 17.0.6, insufficiently sanitized user-supplied input allows authenticated OS command execution as the asterisk user. Authentication with a known username is required. Updating to Endpoint Manager 16.0.92 or 17.0.6 addresses the issue. | ||||
| CVE-2025-6102 | 2026-04-15 | 8.8 High | ||
| A vulnerability classified as critical was found in Wifi-soft UniBox Controller up to 20250506. Affected by this vulnerability is an unknown functionality of the file /authentication/logout.php. The manipulation of the argument mac_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-9178 | 1 Rockwellautomation | 1 1715-aentr Eternet/ip Adapter | 2026-04-15 | N/A |
| A denial-of-service security issue exists in the affected product and version. The security issue is caused through CIP communication using crafted payloads. The security issue could result in no CIP communication with 1715 EtherNet/IP Adapter.A restart is required to recover. | ||||
| CVE-2025-57771 | 1 Roocode | 1 Roo-code | 2026-04-15 | 8.1 High |
| Roo Code is an AI-powered autonomous coding agent that lives in users' editors. In versions prior to 3.25.5, Roo-Code fails to properly handle process substitution and single ampersand characters in the command parsing logic for auto-execute commands. If a user has enabled auto-approved execution for a command such as ls, an attacker who can submit crafted prompts to the agent may inject arbitrary commands to be executed alongside the intended command. Exploitation requires attacker access to submit prompts and for the user to have enabled auto-approved command execution, which is disabled by default. This vulnerability could allow an attacker to execute arbitrary code. The issue is fixed in version 3.25.5. | ||||
| CVE-2024-7139 | 2026-04-15 | 6.5 Medium | ||
| Due to an unchecked buffer length, a specially crafted L2CAP packet can cause a buffer overflow. This buffer overflow triggers an assert, which results in a temporary denial of service. If a watchdog timer is not enabled, a hard reset is required to recover the device. | ||||
| CVE-2024-7137 | 2026-04-15 | 6.5 Medium | ||
| The L2CAP receive data buffer for L2CAP packets is restricted to packet sizes smaller than the maximum supported packet size. Receiving a packet that exceeds the restricted buffer length may cause a crash. A hard reset is required to recover the crashed device. | ||||
| CVE-2025-2071 | 2026-04-15 | N/A | ||
| A critical OS Command Injection vulnerability has been identified in the FAST LTA Silent Brick WebUI, allowing remote attackers to execute arbitrary operating system commands via specially crafted input. This vulnerability arises due to improper handling of untrusted input, which is passed directly to system-level commands without adequate sanitization or validation. Successful exploitation could allow attackers to execute arbitrary commands on the affected system, potentially resulting in unauthorized access, data leakage, or full system compromise. Affected WebUI parameters are "hd" and "pi". | ||||
| CVE-2025-5898 | 1 Gnu | 1 Pspp | 2026-04-15 | 5.3 Medium |
| A vulnerability classified as critical has been found in GNU PSPP 82fb509fb2fedd33e7ac0c46ca99e108bb3bdffb. Affected is the function parse_variables_option of the file utilities/pspp-convert.c. The manipulation leads to out-of-bounds write. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-9494 | 1 Viessmann | 1 Vitogate 300 | 2026-04-15 | N/A |
| An OS command injection vulnerability has been discovered in the Vitogate 300, which can be exploited by malicious users to compromise affected installations. Specifically, the `/cgi-bin/vitogate.cgi` endpoint is affected, when the `form` JSON parameter is set to `form-0-2`. The vulnerability stems from the fact that that function at offset 0x21c24 does not properly sanitize supplied input before interpolating it into a format string which gets passed to `popen()`. Consequently, an authenticated attacker is able to inject arbitrary OS commands and thus gain code execution on affected devices. | ||||
| CVE-2025-9573 | 1 Typo3 | 1 Typo3 | 2026-04-15 | N/A |
| The ns_backup extension through 13.0.2 for TYPO3 allows command injection. | ||||
| CVE-2024-6048 | 1 Openfind | 2 Mailaudit, Mailgates | 2026-04-15 | 9.8 Critical |
| Openfind's MailGates and MailAudit fail to properly filter user input when analyzing email attachments. An unauthenticated remote attacker can exploit this vulnerability to inject system commands and execute them on the remote server. | ||||
| CVE-2025-54469 | 1 Suse | 1 Neuvector | 2026-04-15 | 9.9 Critical |
| A vulnerability was identified in NeuVector, where the enforcer used environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT to generate a command to be executed via popen, without first sanitising their values. The entry process of the enforcer container is the monitor process. When the enforcer container stops, the monitor process checks whether the consul subprocess has exited. To perform this check, the monitor process uses the popen function to execute a shell command that determines whether the ports used by the consul subprocess are still active. The values of environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT are used directly to compose shell commands via popen without validation or sanitization. This behavior could allow a malicious user to inject malicious commands through these variables within the enforcer container. | ||||
| CVE-2025-54314 | 2026-04-15 | 2.8 Low | ||
| Thor before 1.4.0 can construct an unsafe shell command from library input. NOTE: this is disputed by the Supplier because "the method that was fixed can only be used with arguments that are controlled by Thor, and there is no way an attacker can take control of those arguments." | ||||