Export limit exceeded: 424258 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26160 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26160 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74428 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix double unlock in rxrpc_recvmsg() Fix a double unlock in rxrpc_recvmsg() when dealing with OOB messages. | ||||
| CVE-2026-74454 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB binner BO, but writes the size of the whole BO to BPOS. On every binner out-of-memory event the PTB is therefore authorized to write tile lists across all the other slots (which may hold the tile state, tile alloc and overflow memory of in-flight jobs) and, for any slot but the first, past the end of the binner BO into unrelated CMA memory. Since CMA pages are recycled into page cache and user allocations, this is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU hangs with corrupted control list pointers, userspace heap corruption, a GPU that stays permanently wedged after the first hang, and occasional full system crashes, whenever a job overflows the initial binner slot. The bug dates back to the conversion from a dedicated overflow BO (where writing the full BO size was correct) to the slotted binner BO. | ||||
| CVE-2026-74459 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure es58x_read_bulk_callback() resubmits the RX URB after processing a received packet. If the resubmit succeeds, the URB remains anchored and will be handled by the normal RX path or by teardown. However, if usb_submit_urb() fails, the callback unanchors the URB and then returns directly. This skips the existing free_urb path, so the coherent transfer buffer allocated with usb_alloc_coherent() is not released. Reuse the existing free_urb path after a resubmit failure so that the RX coherent buffer is freed before leaving the callback. | ||||
| CVE-2026-74525 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: sxgbe: free TX rings on RX allocation failure When RX descriptor ring allocation fails, init_dma_desc_rings() only frees the partially allocated RX rings and returns. The TX rings that were allocated earlier in the same function are leaked. Rearrange error labels to clean up TX rings upon RX failures. | ||||
| CVE-2026-74431 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential infinite loop in rxrpc_recvmsg() Fix the wait in rxrpc_recvmsg() also take check the oob queue. | ||||
| CVE-2026-74432 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix leak of released call in recvmsg(MSG_PEEK) Fix rxrpc_recvmsg() to also drop the ref it holds on an already-released call if MSG_PEEK is in force (the function holds a ref on the call irrespective of whether MSG_PEEK is specified or not). | ||||
| CVE-2026-74438 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sun4i-ss - Remove insecure and unused rng_alg Remove sun4i_ss_rng, as it is insecure and unused: - It has multiple vulnerabilities. sun4i_ss_prng_seed() is missing locking and has a buffer overflow. sun4i_ss_prng_generate() fails to fill the entire buffer with cryptographic random bytes, because it rounds the destination length down and also doesn't actually wait for the hardware to be ready before pulling bytes from it. - No user of this code is known. It's usable only theoretically via the "rng" algorithm type of AF_ALG. But userspace actually just uses the actual Linux RNG (/dev/random etc) instead. And rng_algs don't contribute entropy to the actual Linux RNG either. (This may have been confused with hwrng, which does contribute entropy.) The sun4i_ss_prng_seed() buffer overflow was reported by Tianchu Chen and discovered by Atuin - Automated Vulnerability Discovery Engine There's no point in fixing all these vulnerabilities individually when this is unused code, so let's just remove it. | ||||
| CVE-2026-74462 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: mark I2C adapter when hardware is powered down On some i.MX platforms, certain I2C client drivers keep a periodic workqueue which continues to trigger I2C transfers. During system suspend/resume, there exists a time window between: - suspend_noirq and the system entering suspend - the system starting to resume and resume_noirq In this window, the I2C controller resources such as clock and pinctrl may already be disabled or not yet restored. If a workqueue triggers an I2C transfer in this period, the driver attempts to access I2C registers while the hardware resources are unavailable, which may lead to system hang. Mark the I2C adapter as suspended during noirq suspend and block new transfers until resume, ensuring that I2C transfers are only issued when hardware resources are available. | ||||
| CVE-2026-74468 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: pch: use raw_spinlock_t for the register lock pch_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. This was confirmed on a PREEMPT_RT kernel with lockdep (PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLEEP). A grounded PoC mirrored pch_irq_type()'s locking and drove it through the real genirq carrier irq_set_irq_type() -> __irq_set_trigger() -> chip->irq_set_type(), i.e. the same __irq_set_trigger() edge that __setup_irq() takes for a requested IRQ. With the original spin_lock_irqsave() edge lockdep reported an invalid wait context, immediately followed by: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 95, name: insmod hardirqs last disabled at (3784): _raw_spin_lock_irqsave+0x4f/0x60 rt_spin_lock+0x3a/0x1c0 repro_irq_set_type+0x64/0xa0 [pch_repro] __irq_set_trigger+0x69/0x140 irq_set_irq_type+0x78/0xd0 Switching the mirrored lock to raw_spinlock_t made both splats go away. Convert the register lock to raw_spinlock_t. The same lock also serializes the GPIO direction/value callbacks and the suspend/resume register save/restore, but all of those critical sections only perform MMIO register accesses (ioread32()/iowrite32()) and irq_set_handler_locked(); none of them contain sleepable operations. Keeping this register lock non-sleeping is therefore appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. This is the same class of issue and fix as recently addressed for other GPIO controllers, e.g. commit 286533cb14a3 ("gpio: sch: use raw_spinlock_t in the irq startup path") and commit 90f0109019e6 ("gpio: eic-sprd: use raw_spinlock_t in the irq startup path"). | ||||
| CVE-2026-74477 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: uprobes: Fix NULL pointer dereference in hprobe_expire() Forking a task that has a pending uretprobe can oops the kernel with a NULL pointer dereference in the clone() path: BUG: kernel NULL pointer dereference, address: 0000000000000018 Oops: 0002 [#1] SMP NOPTI RIP: 0010:hprobe_expire CR2: 0000000000000018 Call Trace: uprobe_copy_process copy_process kernel_clone __x64_sys_clone do_syscall_64 entry_SYSCALL_64_after_hwframe This was found on real hosts on Meta fleet. I've got the impression that this is what is happening: CPU 1 CPU 2 (traced task) ----- ------------------- hit uprobe, prepare_uretprobe(): hprobe LEASED, refcount >= 1 uprobe_unregister() put_uprobe(): refcount -> 0 fork() -> dup_utask() hprobe_expire(hprobe, true) try_get_uprobe() -> NULL get_uprobe(NULL) <-- Oops Only take the extra reference when the uprobe is non-NULL; a NULL means it is gone and is the correct value to return. | ||||
| CVE-2026-74502 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: fix double free of out_cvts on rawmidi error snd_ump_attach_legacy_rawmidi() allocates the legacy conversion array ump->out_cvts and, on the snd_rawmidi_new() error path, frees it with kfree() but leaves ump->out_cvts pointing at the freed memory. When the endpoint is later torn down, snd_ump_endpoint_free() frees ump->out_cvts a second time, resulting in a double free. The host snd-usb-audio driver attaches the legacy rawmidi for any USB MIDI 2.0 (UMP) device, so a device that makes snd_rawmidi_new() fail reaches this path on enumeration. Clear ump->out_cvts after freeing it on the error path so it is not freed again during teardown. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74437 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix deadlock if uvc_status_stop is called from async_ctrl.work If a UVC camera has an asynchronous control, uvc_status_stop may be called from async_ctrl.work: uvc_ctrl_status_event_work() uvc_ctrl_status_event() uvc_ctrl_clear_handle() uvc_pm_put() uvc_status_put() uvc_status_stop() cancel_work_sync() This will cause a deadlock, since cancel_work_sync will wait for uvc_ctrl_status_event_work to complete before returning. Fix this by returning early from uvc_status_stop if we are currently in the work function. flush_status now remains false until uvc_status_start is called again, ensuring that uvc_ctrl_status_event_work won't resubmit the URB. | ||||
| CVE-2026-74526 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix potential deadlock in mpi3mr_fault_uevent_emit mpi3mr_fault_uevent_emit() runs from the fault watchdog and reset paths where host I/O may already be blocked. GFP_KERNEL allocations here, both the local kzalloc_obj() and the ones inside kobject_uevent_env() itself, can trigger reclaim that waits on that blocked I/O and deadlock. Use memalloc_noio_save()/restore() to cover the whole call instead of just the local allocation. | ||||
| CVE-2026-74522 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __close_file_table_ids() A ksmbd_file can remain alive after logical close while another session holds a temporary reference obtained through ksmbd_lookup_fd_inode(). ksmbd_close_fd() currently marks the file closed and drops the idr-owned reference, but leaves the pointer published in the closing session's idr until the final reference is dropped. If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final() supplies the foreign session's file table to __ksmbd_close_fd(). The object is then freed without being removed from its owner's idr, and the owner session later dereferences the stale pointer during file-table teardown. Remove the volatile id from the owner's idr while ksmbd_close_fd() still holds that table's lock, and clear volatile_id before dropping the idr-owned reference. A later foreign final put then only performs physical destruction and cannot remove the object from the wrong table. | ||||
| CVE-2026-74532 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Validate length before parsing diagnostics TLV btintel_diagnostics() accesses tlv->val[0] without first validating that the diagnostics VSE is long enough to contain that field, so may cause reading data beyond the received frame. Fix by validating the length before access. | ||||
| CVE-2026-74553 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Fix number of temperature registers for NCT6116 Unlike NCT6106, NCT6116 only has three temperature registers, and with it only three temperature source and temperature source configuration registers. The register addresses match those of NCT6106 and can be re-used. The code used a separate array to list the temperature source registers for NCT6116, but used the size of the NCT6106 register array to set the number of registers. The NCT6106 register array provides six addresses, while the temperature source register array for NCT6116 only provides three addresses. This causes a KASAN report. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775] Read of size 2 at addr ffffffffc19561a6 by task modprobe/954 ... Call Trace: dump_stack+0x7d/0xa7 print_address_description.constprop.0+0x1c/0x220 ? __kasan_kmalloc.constprop.0+0xc9/0xd0 ? __kmalloc_node_track_caller+0x194/0x5b0 ? nct6775_probe+0x936/0x46f0 [nct6775] ? nct6775_probe+0x936/0x46f0 [nct6775] ... Fix the problem by hard-coding the number of temperature and temperature configuration registers to three for NCT6116. Drop the unnecessary NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE. | ||||
| CVE-2026-74551 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nzxt-smart2) DMA-align output buffer Sashiko reports: When send_output_report() calls hid_hw_output_report(), the underlying USB HID core calls usb_interrupt_msg() which maps this buffer directly for DMA. When the DMA mapping flushes or invalidates the cacheline, it will corrupt the adjacent variables (mutex, update_interval) that were modified concurrently by the CPU. This causes memory corruption due to cacheline sharing on non-coherent CPU architectures (such as ARM or MIPS). The DMA API debugging tool (CONFIG_DMA_API_DEBUG) will trigger runtime warnings for this violation. Any operation that triggers send_output_report() (like setting a fan speed or updating the interval) causes the USB DMA mapping. On systems with non-coherent caches, this structural bug causes immediate and deterministic memory corruption. Align the output buffer to ARCH_DMA_MINALIGN to fix the problem. | ||||
| CVE-2026-74478 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: um: vector: fix use-after-free in vector_mmsg_rx() When vector_mmsg_rx() discards a packet whose overlay header fails verify_header(), it frees the skb and continues the loop: if (header_check < 0) { dev_kfree_skb_irq(skb); vp->estats.rx_encaps_errors++; continue; } The normal and short-packet paths fall through to the bottom of the loop body, which clears the consumed slot and advances the cursors: (*skbuff_vector) = NULL; mmsg_vector++; skbuff_vector++; The verify_header() < 0 path skips that via continue, so the freed skb is left in skbuff_vector[] and the cursors do not advance. The next iteration reads the same slot, gets the freed skb, and frees it again, producing a refcount underflow / use-after-free in the RX path. Discard the slot the same way the other paths do before continuing. Only transports whose verify_header() can return negative are affected: GRE and L2TPv3 do so on a cookie/session-id mismatch (raw/tap do not), so any peer on such a transport can trigger it without authentication. | ||||
| CVE-2026-74472 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: reset kernel-owned dev_info fields in ublk_ctrl_add_dev() ublk_ctrl_add_dev() memcpy()s the userspace ublksrv_ctrl_dev_info into ub->dev_info and then fixes up the fields the driver owns, but misses ->state and ->ublksrv_pid. A device added with ->state = UBLK_S_DEV_LIVE passes the "->state != UBLK_S_DEV_DEAD" test that ublk_stop_dev_unlocked() uses as its proxy for "a disk is attached", while ->ub_disk is still NULL, so DEL_DEV right after ADD_DEV oopses in del_gendisk(). UBLK_S_DEV_QUIESCED plus UBLK_F_USER_RECOVERY dies one step earlier, in ublk_force_abort_dev(). A poisoned ->state also gets START_USER_RECOVERY and the char device read/write path onto a device that was never started, and wedges START_DEV at -EEXIST. A poisoned ->ublksrv_pid just makes GET_DEV_INFO report an unrelated task as the ublk server. Reset both after the memcpy(), as ublk_detach_disk() does. Userspace only ever reads these back, so correcting them silently breaks nothing. ADD_DEV has copied ->state in unsanitized since ublk was merged, but back then it was harmless: the gendisk was allocated during ADD_DEV, and both teardown and the START_DEV -EEXIST check keyed off disk_live() rather than ->state. The oops became reachable once the disk allocation moved to START_DEV and those checks switched to ->state. | ||||
| CVE-2026-74555 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path. | ||||