Export limit exceeded: 29137 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 416316 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (416316 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99162 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: shared: fix use-after-free bug when adding shared proxies The GPIO lookup table can stay alive for longer than the kobject whose name string's address we're assigning to lookup->dev_id. Fix a potential UAF by duplicating the string. | ||||
| CVE-2026-99126 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/ctcm: Prevent XID null dereference The mpc_validate_xid() function sets grp->saved_xid2->xid2_flag2 to 0x40 to signal XID validation error. If peer XID is NULL or r/w channel pairing mismatch happens, grp->saved_xid2 is never initialized. An attempt to set the flag in such case leads to NULL dereference. Fix this by using the always available priv->xid->xid2_flag2 instead of grp->saved_xid2->xid2_flag2 for validation errors. | ||||
| CVE-2026-99128 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate chunk length in the inqueue parser SCTP chunks always include a four-byte generic header, but sctp_inq_pop() currently accepts shorter declared lengths. A zero-length chunk leaves chunk_end at the current header. When ASCONF is covered by the association's SCTP-AUTH policy, sctp_assoc_bh_rcv() can continue before the state machine performs its normal chunk-length check. sctp_inq_pop() then returns the same malformed chunk repeatedly and the receive softirq can lock up. A remote SCTP peer can trigger this after establishing an association on a kernel built with CONFIG_IP_SCTP and configured with net.sctp.addip_enable=1 and net.sctp.auth_enable=1. The reproducer did not require application credentials, a shared SCTP AUTH key, or net.sctp.addip_noauth_enable=1. On commit f967455fb2a5 ("seg6: reset IP6CB after IPv6 decapsulation"), one zero-length ASCONF caused repeated watchdog soft-lockup reports in a two-vCPU KVM guest. All 3 pre-trigger health probes succeeded, while 36 of 37 post-trigger probes failed. With this change, all 37 post-trigger probes succeeded and no equivalent soft-lockup signature appeared. Reject chunks shorter than the generic SCTP header at the shared inqueue parser boundary. Mark the packet for discard before either caller can continue processing it, while preserving the four-byte generic minimum. Declared-length 1 through 4 controls and kernel-generated ASCONF traffic remained healthy. The patched sctp_hello selftest passed for IPv4 and IPv6. The complete private reproducer and validation evidence are available directly to maintainers on request. | ||||
| CVE-2026-99133 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix the recvmsg window update iucv_sock_recvmsg() sends the HiperSockets-only AF_IUCV_FLAG_WIN without testing the transport, so on a classic z/VM socket iucv_send_ctrl() sizes the skb through a NULL iucv->hs_dev. SO_MSGLIMIT accepts 1, so msglimit / 2 is zero and one recvmsg() on its own socket is enough for an unprivileged process to take a spurious disconnect. It also calls iucv_send_ctrl() under spin_lock_bh(&message_q.lock), which allocates GFP_KERNEL inside a section the code treats as atomic. Sending outside that lock lets two recvmsg() reach afiucv_hs_send() at once, where msg_recv is sampled for the advertised window and subtracted after dev_queue_xmit() -- and sendmsg reaches that counter under lock_sock() while recvmsg holds no socket lock, so both can subtract the same value, the counter goes negative and the credit reaches the peer twice. Test the transport, claim the credit with atomic_xchg() after the last error exit and hand it back if the transmit fails, and send once the lock is dropped. | ||||
| CVE-2026-99136 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-crypt: fix a tiny race condition in crypt_dec_pending crypt_dec_pending reads io->error before calling atomic_dec_and_test. Another context, for example crypt_endio called from an interrupt, may set io->error and drop its reference between the read and the decrement. crypt_dec_pending then drops the last reference and completes the bio with the stale status - so a read that failed and was never decrypted, or a write that failed, is reported as successful. The read was placed before the decrement by commit b35f8caa0890 ("dm crypt: wait for endio to complete before destruction"), because that commit freed dm_crypt_io before calling bio_endio. This is no longer the case, dm_crypt_io lives in the per-bio data now. Read io->error after atomic_dec_and_test instead. atomic_dec_and_test is fully ordered, so no additional barrier is needed. | ||||
| CVE-2026-99142 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Check operator stack capacity before pushing predicate_parse() uses the first operator stack entry before processing any opening parentheses. A push then increments top before writing. The existing check still permits that write when top already points to the last allocated entry, which can access beyond the operator stack. Reject the push when top reaches the last allocated entry. | ||||
| CVE-2026-99143 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the predicate limit separate from program capacity predicate_parse() adds two to nr_preds to reserve the terminal TRUE and FALSE entries. It also uses that increased value as the limit for parsed predicates. If the initial count is smaller than the number actually parsed, the program can fill the allocation and subsequent accesses can go past its end. Keep nr_preds as the predicate limit and use a separate value for the allocation size. This leaves space for both terminal entries and a zeroed entry when parsing stops at the limit. | ||||
| CVE-2026-99151 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL sink dereference in USB4 bandwidth functions allocate_usb4_bandwidth_for_stream() and allocate_usb4_bandwidth() both use ASSERT(stream->sink) before dereferencing stream->sink->link. ASSERT is compiled out in production builds, so a NULL stream->sink causes a NULL pointer dereference. link_set_dpms_off() already guards two earlier accesses to stream->sink with explicit NULL checks, confirming that stream->sink can legitimately be NULL. The subsequent call to deallocate_usb4_bandwidth() had no equivalent guard. Replace the ASSERT() calls with proper NULL checks that return false early, and add a matching stream->sink guard at the call site in link_set_dpms_off() consistent with the surrounding pattern. v2: Keep the existing ASSERT() calls for diagnostics (to report unexpected NULL sink), and add explicit NULL checks that return false before dereferencing stream->sink. Also add a matching stream->sink guard at the deallocation call site in link_set_dpms_off(). (Alex) (cherry picked from commit 98029a0ce61feb52c563f65349dd9b25f672e355) | ||||
| CVE-2026-113672 | 1 Argoproj | 1 Argo-cd | 2026-10-28 | 9.9 Critical |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. From 0.9.0 until 3.3.15, 3.4.10, 3.5.4, and 3.6.0-rc2, the repo-server evaluates .jsonnet files with an importer that does not confine import, importstr, or importbin to the repository root. Absolute paths, parent-directory traversal, and repository symlinks can open any file readable by the repo-server, including /proc/self/environ, projected service-account tokens, mounted private keys, and repository credentials. Although generated Secrets are redacted, placing imported contents in a ConfigMap returns the data to the caller. Using importstr on a non-terminating device such as /dev/zero can exhaust repo-server memory. An attacker can commit a .jsonnet file to a Git repository used by an Application or upload the file through POST /api/v1/applications/manifestsWithFiles, also exposed by argocd app diff --local --server-side-generate. Directory applications evaluate every .jsonnet file in the application directory. The upload path requires only Application get permission on an existing directory Application, without Application update or sync permission or repository write access. This issue is fixed in versions 3.3.15, 3.4.10, 3.5.4, and 3.6.0-rc2. | ||||
| CVE-2026-63947 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: fix missing length checks in hidp_input_report() hidp_input_report() reads keyboard and mouse payload data from an skb without first verifying that skb->len contains enough data. hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching to hidp_input_report(). If a paired device sends a truncated packet, the handler reads beyond the valid skb data, resulting in an out-of-bounds read of skb data. The OOB bytes may be interpreted as phantom key presses or spurious mouse movement. Replace the open-coded length tracking and pointer arithmetic with skb_pull_data() calls. skb_pull_data() returns NULL if the requested bytes are not present, eliminating the need for a manual size variable and the separate skb->len guard. | ||||
| CVE-2026-115603 | 2026-10-28 | 8.5 High | ||
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Advanced Ads GmbH Advanced Ads – Tracking advanced-ads-tracking allows Blind SQL Injection.This issue affects Advanced Ads – Tracking: from n/a before 4.0.0. | ||||
| CVE-2026-116390 | 2026-10-28 | 7.2 High | ||
| Deserialization of Untrusted Data vulnerability in stepasyuk Filter Everything — WordPress & WooCommerce Filters filter-everything allows Object Injection.This issue affects Filter Everything — WordPress & WooCommerce Filters: from n/a through 1.9.7. | ||||
| CVE-2026-116389 | 2026-10-28 | 8.8 High | ||
| Deserialization of Untrusted Data vulnerability in crossi72 Phoenix Media Rename phoenix-media-rename allows Object Injection.This issue affects Phoenix Media Rename: from n/a through 3.13.5. | ||||
| CVE-2026-115590 | 2026-10-28 | 7.2 High | ||
| Deserialization of Untrusted Data vulnerability in weDevs Dokan dokan-lite allows Object Injection.This issue affects Dokan: from n/a through 5.3.1. | ||||
| CVE-2026-99157 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Pass reply_len to bsg_setup_queue() to fit UFS ARPMB replies bsg-lib allocates a 96-byte (SCSI_SENSE_BUFFERSIZE) reply buffer per job, but struct ufs_rpmb_reply is 104 bytes: a 40-byte struct ufs_bsg_reply followed by a 64-byte EHS. When an Advanced RPMB command returns an EHS, ufshcd_advanced_rpmb_req_handler() copies it right after the 40-byte header and writes 8 bytes past the end of the buffer. Let each BSG transport pass its reply buffer size to bsg_setup_queue() and have ufs_bsg request sizeof(struct ufs_rpmb_reply), so the full reply reaches user space. Other transports keep SCSI_SENSE_BUFFERSIZE. | ||||
| CVE-2026-99159 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx() On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[] shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma() dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader() writes two such indices into meta->buffers[], which rb_cpu_meta_valid() would reject on the next boot, discarding the previous boot's trace. A CPU's sub-buffer array starts after its meta header and the nr_subbufs integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx() inverts that calculation but skips only the integers, not the header, so its base is one sub-buffer low whenever the omitted header size crosses the alignment boundary. Invert the calculation with rb_subbufs_from_meta() rather than repeating it. rb_range_buffer() maps an index back to an address through the same helper, so the two directions can no longer disagree. | ||||
| CVE-2026-99160 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not show buffer_meta for CPUs without a buffer The per_cpu/cpuN/buffer_meta files are created for every possible CPU, but buffer->buffers[cpu] is only allocated once that CPU comes online. Reading the file of a CPU that never came online dereferences a NULL cpu_buffer in rbm_start(). Fail the open with -ENODEV when the CPU has no buffer, as the other per CPU ring buffer interfaces do. | ||||
| CVE-2026-99163 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing/histograms: Reject non-stacktrace fields for synthetic stacktrace fields In check_synth_field(), when a synthetic event field is a stacktrace (field->is_stack) and the histogram field is not a "long[" stacktrace array, validation falls through to the generic size and signedness comparison. Because parse_synth_field() sets a stacktrace field's type to "__data_loc unsigned long[]", its size is sizeof(u64) and synth_field_signed() marks it as signed. Consequently, any 8-byte signed scalar histogram field passes the fallback check, and its scalar value is subsequently dereferenced as a kernel stacktrace pointer in get_field_size() and trace_stack(). Furthermore, checking strstr(hist_field->type, "long[") is insufficient because tracepoint fields defined with __bitmask() or __rel_bitmask() also have type "__data_loc unsigned long[]" or "__rel_loc unsigned long[]", whilst create_hist_field() treats them as 4-byte scalar values without HIST_FIELD_FL_STACKTRACE. Propagate HIST_FIELD_FL_STACKTRACE to variable references and field variables (whilst excluding variable aliases from per-element stacktrace capture), and reject any mismatch between HIST_FIELD_FL_STACKTRACE and field->is_stack in check_synth_field(). | ||||
| CVE-2026-99164 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix slab corruption from undersized DMA bounce buffers Since commit faa8e404ad8e ("spi: imx: support dynamic burst length for ECSPI DMA mode"), the driver allocates its private DMA TX/RX buffers with kzalloc(dma_len), where dma_len is only rounded up to 4 bytes, but maps, syncs and unmaps them with DMA_CACHE_ALIGNED_LEN(dma_len), i.e. rounded up to the cache line size. As a result, the DMA API operates on memory beyond the end of the allocation. This was observed on a custom i.MX8MP platform with an mcp251xfd CAN controller under heavy RPMSG load, as a series of refcount_t warnings triggered from rpmsg_recv_done() in virtio_rpmsg_bus: refcount_t: addition on 0; use-after-free. refcount_t: underflow; use-after-free. refcount_t: saturated; leaking memory. Leading finally to an "Unable to handle kernel paging request" oops. Reproducing this problem took between 30 minutes and roughly 30 hours under the same workload. Hardware watchpoints on the refcount of a struct rpmsg_endpoint showed it was overwritten from 2 to 1 by __pi_memcpy_generic() in the irq/155-spi2.0 thread. Additionally it was found that a "normal" rpmsg_recv_done() took 11µs +/-2µs from its kref_get to kref_put. In the error case the same sequence took about 215µs +/-10µs. Based on this, an LLM was used to identify the size mismatch fixed here. Allocate the buffers with DMA_CACHE_ALIGNED_LEN(dma_len) so they cover the full mapped length, and use the same length for dma_sync_single_for_cpu() to stay consistent with map and unmap. With this patch applied, the same workload ran for more than 200 hours without the problem reproducing. | ||||
| CVE-2026-99165 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate output stream after association connect wait When message interleaving is enabled, the first send waits for association establishment before building its data chunks. The wait drops the socket lock, and handshake processing can reduce the output stream count to the peer-advertised inbound stream count. sctp_stream_init() then frees the extension of every removed stream. The sender resumes with the stream that it checked before the wait. If the peer removed that stream, sctp_outq_tail() later dereferences its NULL extension. Fatal-oops policies then panic the host. KASAN: null-ptr-deref in range [0x38-0x3f] RIP: sctp_outq_tail+0x49e/0xaa0 Call Trace: sctp_primitive_SEND sctp_sendmsg_to_asoc sctp_sendmsg A range check alone is insufficient. Stream reconfiguration can grow the output count again while the lock is released without recreating extensions freed by the earlier shrink. The stream can then be in range while its extension remains NULL. The send-buffer wait has the same issue. Factor the range and extension checks into a helper and repeat both after each send-path wait that drops the socket lock. Once the lock is reacquired, the validation remains stable through data creation and queueing. If validation fails after the connect wait, the auto-created association is already established. Return ESRCH so the existing caller path keeps it under state-machine ownership instead of freeing it directly, which would leave protocol, counter and socket state inconsistent. | ||||