Export limit exceeded: 417482 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417482 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99202 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix SMP IO deadlock during HA resume smp_execute_task_sg() calls pm_runtime_get_sync() on the host before issuing an SMP command. When that command is itself issued from the HA resume path, the get_sync() deadlocks: it waits for the ongoing resume (the device is RPM_RESUMING), while the resume is blocked in sas_drain_work() waiting for that same SMP IO to complete. The deadlock needs an expander-attached SATA disk. During sas_resume_ha() -> sas_drain_work(), DISCE_RESUME -> sas_resume_sata() -> ata_sas_port_resume() requests ATA_EH_RESET, and the hard reset for such a disk is done via SMP PHY CONTROL (sas_ata_hard_reset() -> sas_phy_reset() -> sas_smp_phy_control() -> smp_execute_task_sg()). Direct-attached SATA resets through lldd_control_phy() and SSP devices use TMFs, so neither hits this. Replace the get_sync()/put_sync() pair with pm_runtime_get_noresume()/pm_runtime_put(). smp_execute_task_sg() only needs to hold off autosuspend while the SMP is in flight, and it must not try to resume the host: a sync resume issued from the HA resume path itself is what deadlocks, and by the time sas_resume_ha() runs, hw_init has already reinitialized the hardware, so the device is accessible without one. The usage reference is still required. Discovery work normally runs inside an event worker's PM reference, taken at sas_notify_port_event() notify time and held until the handler has flushed the disco queue. sas_rediscover_ex_phy() however requeues DISCE_REVALIDATE_DOMAIN from within the revalidation worker itself, and flush_workqueue() does not wait for work items queued during execution, so that chained revalidation runs with no outer PM reference - without the get_noresume(), its SMP could race autosuspend. For the BSG path, sas_smp_handler() is the only caller which may find the host autosuspended: expander SMP requests do not go through any SCSI device request queue, so nothing else in that path holds the host awake. Resume it there with pm_runtime_resume_and_get() and check the result. | ||||
| CVE-2026-99201 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netlink: avoid hashing the network namespace pointer The netlink rhashtable key includes a raw struct net pointer and a user-controlled port ID. Both /proc/net/netlink and socket diagnostics expose the table's bucket order. By binding and rebinding chosen NETLINK_USERSOCK port IDs, an unprivileged reader can distinguish equal buckets and recover the low bits of the Jenkins hash. Its 32-bit seed and the limited set of kernel-image slides can then be searched offline to recover the address of init_net. Use the namespace's unique, non-address net_cookie in the comparison key instead. It is assigned before the per-net initializers run and remains unchanged for the namespace's lifetime. The lookup key and object hash are still built by netlink_compare_arg_init(), keeping lookup, insertion, removal and rehashing consistent while preserving namespace separation. Neither public table walker needs to change. Reading the socket's namespace cookie in netlink_compare() is safe under RCU, including during namespace teardown. netlink_release() removes the socket from the hash table and defers its final put with call_rcu(). cleanup_net() runs the per-net exit methods and waits for outstanding RCU callbacks with rcu_barrier() before freeing namespace storage. Unlike ns.ns_id, net_cookie is also available and initialized during setup_net() in older stable kernels, making the change straightforward to backport to v5.15 and later. | ||||
| CVE-2026-99192 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: unshare the skb before writing the control block bcmgenet stores first_cb, last_cb and bytes_sent in the skb control block and reads them back on completion to free the skb and credit BQL. ether_setup() leaves IFF_TX_SKB_SHARING set, so the stack can resubmit a shared skb that is still in the ring. The next transmit overwrites last_cb, so the earlier slots complete without crediting their bytes and BQL stalls the queue until the watchdog resets it. Unshare the skb before writing the control block. Reproduce with pktgen in clone_skb mode, which hands the driver the same skb while earlier copies are still in the ring: modprobe pktgen pg=/proc/net/pktgen echo "add_device eth0" > $pg/kpktgend_0 echo "dst_mac AA:BB:CC:DD:EE:FF" > $pg/eth0 echo "dst 192.0.2.1" > $pg/eth0 echo "clone_skb 8" > $pg/eth0 echo "count 0" > $pg/eth0 echo start > $pg/pgctrl & sleep 5 echo stop > $pg/pgctrl wait cat /sys/class/net/eth0/queues/tx-0/byte_queue_limits/inflight inflight stays nonzero on the now idle queue. clone_skb 0 leaves it at zero. | ||||
| CVE-2026-99191 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: calipso: keep BIG TCP payload_len in calipso_skbuff_setattr() calipso_skbuff_setattr() adjusts payload_len by the length of the option it inserts or resizes: payload = ntohs(ip6_hdr->payload_len); ip6_hdr->payload_len = htons(payload + len_delta); GRO can build BIG TCP packets larger than IPV6_MAXPLEN, and stores payload_len == 0 for them; ipv6_payload_len() then falls back to skb->len. For such a packet forwarded to a destination mapped to CALIPSO, the code above writes len_delta (or 65536 + len_delta when shrinking) into payload_len, and ipv6_payload_len() no longer falls back to skb->len. nf_tables, conntrack and sch_cake rely on it. The same arithmetic also wraps when a packet grows past IPV6_MAXPLEN, and a BIG TCP packet that shrinks below IPV6_MAXPLEN should get its real length back. Set payload_len from the skb length with ipv6_set_payload_len(), which stores 0 above IPV6_MAXPLEN and the real length otherwise, as ipv6_gro_complete() does. The network header was just reset to skb->data, so skb->len - sizeof(*ip6_hdr) is the payload length. Tested on one kernel (arm64, QEMU) with SELinux permissive, a minimal mdp-generated policy (network_peer_controls=1), "netlabelctl calipso add pass doi:16" and a NetLabel mapping of fd00:2::/64 to CALIPSO DOI 16. calipso_skbuff_setattr() was called through netlbl_skbuff_setattr() from a test-only debugfs hook (not part of this patch) adding a level-only label; payload_len after the call: case before fix after fix real length 1000, unlabeled 1016 1016 1016 70000 GSO, payload_len 0 16 0 70016 65530 GSO, grows past MAXPLEN 10 0 65546 65540 GSO with a 24 byte hop header, shrinks below MAXPLEN 65528 65532 65532 1000 with a 24 byte hop header 992 992 992 (0 means ipv6_payload_len() returns the real length.) On the forward path, with a client injecting unlabeled UDP through a router to a server, the router adds the CALIPSO option and the server delivers all datagrams (Udp6InDatagrams 5, Ip6InTruncatedPkts 0) with this patch. | ||||
| CVE-2026-99190 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: fix memory leak in gpiod_set_array_value_complex() on error paths A drive-by review by Sashiko reports that, after a failed call to gpiochip_set_multiple(), gpiod_set_array_value() returns abruptly, bypassing the freeing of possibly alloced bitmaps, potentially leaking memory. It is an unlikely error path, but is possible. Defer the return code check until after the bitmap_free() block. | ||||
| CVE-2026-99187 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix perf_pmu_migrate_context() leaving events behind __perf_pmu_remove() walks the group leaders of a CPU and PMU with perf_event_groups_for_cpu_pmu(), removing each one as it goes. perf_remove_from_context() takes the leader out of the groups rbtree, after which rb_next() on that node returns NULL, prematurely ending the walk. Other groups stay behind in the source context. On CPU hotplug, they are then torn down with the dying CPU. They keep running until teardown, while the PMU's interrupt and migrated events are on a new CPU, which drivers rely on never happening. Walk ctx->event_list instead and pick out the PMU's events by their pmu_ctx. | ||||
| CVE-2026-99182 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Fix shift-out-of-bounds for aggregated ALH capture When ch_count is smaller than blob->alh_cfg.device_count (e.g. a mono capture stream, such as a SmartMic, aggregated across multiple SDW links), step = ch_count / blob->alh_cfg.device_count truncates to 0. The subsequent GENMASK(step - 1, 0) then underflows step - 1 (u32) to UINT_MAX, causing GENMASK()'s internal shift to use an out-of-bounds exponent: UBSAN: shift-out-of-bounds in sound/soc/sof/ipc4-topology.c:2363:13 shift exponent 18446744069414584384 is too large for 64-bit type 'long unsigned int' Treat ch_count < device_count the same way as the existing "channels equal to output reference channels" case: apply the same ch_mask to every aggregated device instead of trying to split channels that can't be evenly divided. | ||||
| CVE-2026-99181 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: autofs: ignore notification errors from a replaced pipe autofs_notify_daemon() takes a reference to the current notification pipe under wq_mutex, then drops the mutex before writing the request. The write can block while the daemon enters catatonic mode and installs a replacement pipe. If the old pipe's reader is then closed, the delayed write returns -EPIPE and the generic error path enters catatonic mode again. That transition acts on the current superblock state, closes the replacement pipe, and releases the new daemon generation's wait queues. Only enter catatonic mode when the pipe which failed is still the current pipe. Factor the already-locked transition so the identity check and state change are atomic with respect to another replacement. This was reproduced on v7.3-rc5-337-gff47652a4b66c in a local QEMU guest. An unprivileged UID 65534 lookup filled the old packet pipe before a normal CATATONIC/SETPIPEFD restart. On the unmodified kernel, the new pipe received HUP and both a pending victim lookup and a later lookup failed with ENOENT in two out of two fresh-mount runs. With this change, the new pipe remained active, received an intact 304-byte request, and both victim lookups completed in two out of two runs. Normal lookup and restart-without-a-blocked-writer controls passed. No KASAN, oops, refcount, or lock diagnostic was observed. A source reproducer and complete local logs are available privately on request. The demonstrated impact is limited to denial of a shared autofs service during a legitimate daemon restart. No memory corruption, information leak, privilege escalation, or code execution primitive was observed. | ||||
| CVE-2026-99180 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: unicode: free the map after a grace period generic_ci_d_hash() and generic_ci_d_compare() read sb->s_encoding and dereference the unicode map while a pathwalk in rcu mode holds nothing but rcu_read_lock(). The filesystems that use them, ext4, f2fs and tmpfs, drop the map with utf8_unload() from ->put_super(), which runs when the last reference to the mount goes away. A lookup that is still inside such a filesystem at that point reads a freed map. With a pathwalk held up in utf8_casefold_hash() while the last reference to a casefolded tmpfs goes away: BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950 Read of size 8 at addr ff110001030fe658 by task walker/98 Call Trace: <TASK> utf8nlookup+0x74c/0x950 utf8byte+0x160/0x1560 utf8_casefold_hash+0x167/0x230 generic_ci_d_hash+0xdd/0x1c0 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 94: __kmalloc_cache_noprof+0x249/0x560 utf8_load+0x4e/0x570 shmem_parse_opt_casefold.isra.0+0x92/0x270 [...] Freed by task 97: kfree+0x1db/0x5b0 shmem_put_super+0x72/0x170 generic_shutdown_super+0x14c/0x530 kill_anon_super+0x3a/0x60 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. So it is reachable. Delay the free until a grace period has passed. The map and the data table it holds a reference to then outlive any pathwalk that found the superblock before the mount went away. The reference on the data table module is dropped from the rcu callback as well. utf8-core is built in whenever CONFIG_UNICODE is set, so there is no module exit that would have to wait for the callbacks. Overlayfs points the s_encoding of an overlay at the map of its first layer without taking a reference of its own. That stays correct. The layer is held by the overlay, so its map is dropped only after the overlay is gone. | ||||
| CVE-2026-99179 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watch_queue: Fix note pool publication race in watch_queue_set_size() There is a race between watch_queue_set_size() and post_one_notification(). watch_queue_set_size() publishes wqueue->notes, notes_bitmap, nr_pages and nr_notes with plain stores, and post_one_notification() reads them with plain loads under a different lock, so nothing orders the four stores against the poster's loads: depending on the build, notes can be stored last (gcc 14 on x86-64 does this). Since keyctl_watch_key() lets a watch attach to a queue before it is sized, post_one_notification() can already be running on another CPU at that moment: it reads nr_notes > 0, passes its bounds check, and then reads notes while it is still NULL, dereferencing notes[0]. An unprivileged user triggers this reliably by watching one of its own keys through a notification pipe and racing ioctl(IOC_WATCH_QUEUE_SET_SIZE) on that pipe against keyctl(KEYCTL_SETPERM) on the key from another CPU, triggering: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:post_one_notification.isra.0+0xa2/0x1e0 Call Trace: __post_watch_notification+0x148/0x180 keyctl_setperm_key+0x119/0x130 do_syscall_64+0x108/0x4c0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: Fatal exception in interrupt Fix this by publishing nr_notes last with smp_store_release(), and by reading it once with smp_load_acquire() in post_one_notification() before the bitmap and the page array are touched. A poster that observes a non-zero nr_notes then also observes the pool behind it; one that observes zero drops the notification as before. | ||||
| CVE-2026-99178 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI context An async #PF "page not present" event arrives through the #PF vector, and its reason sits in the per-CPU apf_reason.flags until __kvm_handle_async_pf() reads and clears it. If an NMI arrives after the event is injected and before the #PF handler reads the flags, and the NMI handler itself takes a #PF, that fault reads and clears the flags belonging to the #PF it interrupted. It then finds interrupts disabled in the NMI context it interrupted, and panics: Kernel panic - not syncing: Host injected async #PF in interrupt disabled region Call Trace: <NMI> panic+0x52/0x60 __kvm_handle_async_pf+0xb0/0xb0 exc_page_fault+0x71/0xb0 asm_exc_page_fault+0x27/0x30 RIP: 0010:__get_user_nocheck_8+0x6/0x20 perf_callchain_user+0x147/0x1a0 get_perf_callchain+0x12d/0x1c0 ... perf_event_nmi_handler+0x26/0x50 exc_nmi+0xe8/0x110 RIP: 0010:asm_exc_page_fault+0x0/0x30 </NMI> The last RIP line shows the NMI landing on the first instruction of the #PF entry. perf with user call chains takes such a fault: the sampling NMI walks the user stack with __get_user(), which faults when a saved frame pointer is not a valid user address or the walk runs off the top of the stack. The same window exists when KVM, running as an L1 hypervisor with DELIVERY_AS_PF_VMEXIT, reads the flags itself after a #PF VM-exit. The NMI entry code saves and restores CR2 for this nesting, but not the async #PF reason. Andy Lutomirski described the race, with perf as the example, when async #PF delivery was reworked in 2020 [1]. Saving and clearing the flags across the NMI, next to CR2, was discussed there but not merged. Since that rework, Linux has stopped setting KVM_ASYNC_PF_SEND_ALWAYS, so the host delivers "page not present" only for user mode faults and a kernel-mode fault in NMI context (including kernel-mode #MC and #DB) cannot be an async page fault. In that case, return without touching the flags so that the interrupted handler finds them intact. Tested on v7.3-rc5 in a 4-vCPU, 2 GiB guest restored from a snapshot whose memory is served on demand through userfaultfd, so that reading it back takes async #PFs, while every thread samples hardware cycles with user call chains and points its frame pointer at an unmapped page. Without this patch the guest panicked as above in 3 of 3 runs. With it, the guest survived 3 of 3 runs of 60 seconds, and the host counted 148,441 to 153,334 kvm_async_pf_not_present events in the first 20 seconds of each. On 6.18.50 the results were the same: the guest panicked without the patch and survived with it. | ||||
| CVE-2026-99176 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Reset MMU back to the root MMU if loading L2 state fails for !VM-Entry Reset the vCPU's MMU pointer back to the root MMU if loading L2 state fails in the "not from VM-Entry" case, i.e. when emulating RSM or handling KVM_SET_NESTED_STATE. Failure to unwind the MMU pointer results in KVM trying to run L1 with a nested MMU, and is especially problematic if the vCPU manages to free its nested state before the VM crashes. Constructing the root for a nested EPT MMU goes through vmcs12, which is dynamically allocated/freed when nVMX is enabled/disabled. And so if the nested state is freed with the MMU still pointing at the nested MMU, KVM will hit a NULL pointer deref when attempting to get L1=>L2 EPTP. BUG: kernel NULL pointer dereference, address: 0000000000000078 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 114a2d067 P4D 111743067 PUD 11141f067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 20 UID: 1000 PID: 1272 Comm: nested_tdp_faul Not tainted 7.3.0-rc4-8c89f11d1a99b-sink-vm #1914 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel] Call Trace: <TASK> kvm_mmu_load+0xcd/0x870 [kvm] kvm_arch_vcpu_ioctl_run+0x18f5/0x1f80 [kvm] kvm_vcpu_ioctl+0x2c7/0x970 [kvm] __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x9c/0x4d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x47491b </TASK> Modules linked in: kvm_intel kvm irqbypass CR2: 0000000000000078 ---[ end trace 0000000000000000 ]--- RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel] [sean: write changelog] | ||||
| CVE-2026-99175 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fsnotify: prevent mark additions during connector teardown fsnotify_destroy_marks() keeps a reference to its current mark while it drops conn->lock to destroy the mark. This stabilizes the forward-walk cursor, but does not prevent a new mark from being inserted before it. For example, an inotify watch re-added after IN_IGNORED sorts before the old, detached mark for the same group. The walk can miss the replacement and then detach the entire connector from the object. The replacement is still on its group's marks_list and, for inotify, in the watch IDR. The group mutex no longer protects the connector's object from disappearing. An unprivileged fdinfo read racing the final detach can consequently call igrab(NULL): BUG: KASAN: null-ptr-deref in igrab+0x24/0x100 Write of size 4 at addr 0000000000000148 Call Trace: igrab+0x24/0x100 inotify_show_fdinfo+0x1dc/0x5e0 seq_show+0x397/0x690 Set a DESTROYING flag under conn->lock before starting the walk, and reject new marks on that connector with -ENOENT. The existing add-mark error paths undo the temporary group-list entry and the backend's watch allocation. Do not wait for teardown while holding the group mutex, which the destroyer needs. Once the old connector is detached, an add can install a fresh connector as before. This closes the insertion race for all object types using the common connector teardown, without changing the mark reference or SRCU lifetime rules. | ||||
| CVE-2026-99174 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: free the sbi after a grace period ext4_get_link() follows a symlink that keeps its target in a data block in rcu pathwalk mode with ext4_getblk(EXT4_GET_BLOCKS_CACHED_NOWAIT). That reads s_mount_state in the ASSERT() of ext4_getblk() and again in ext4_es_lookup_extent(), and the lookup bumps the extent status hit or miss counter, all through sb->s_fs_info. ext4_put_super() destroys those counters, clears sb->s_fs_info and frees the sbi without waiting for a grace period. A pathwalk that is still in ext4_get_link() when the last reference to the mount goes away then dereferences a NULL s_fs_info, the freed sbi or the destroyed percpu counters. With a pathwalk held up in ext4_get_link() while the last reference goes away: KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] RIP: 0010:ext4_getblk+0xf0/0x640 Call Trace: <TASK> ext4_get_link+0x26c/0x410 pick_link+0xf96/0x1780 step_into_slowpath+0x9b8/0x1250 path_lookupat+0x484/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 vfs_fstatat+0x4d/0x90 __do_sys_newfstatat+0xa0/0x100 do_syscall_64+0x10e/0x5e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. Keep sb->s_fs_info and free the sbi together with the extent status counters after a grace period. Split the counters out of ext4_es_unregister_shrinker() for that. The shrinker still gets wasted in ext4_put_super(), the counters go with the sbi. | ||||
| CVE-2026-99173 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eventfs: Free the eventfs_inode after an rcu grace period too tracefs_d_revalidate() reads ->is_freed of the eventfs_inode that dentry->d_fsdata points to, and ->d_revalidate() is called in rcu pathwalk mode with nothing but rcu_read_lock() held. The dentry itself stays around for such a walker, but tracefs_d_release() drops its reference to the eventfs_inode when the dentry is killed, and release_ei() then frees it after a grace period of eventfs_srcu. An SRCU grace period doesn't wait for rcu_read_lock() sections, so the walker can read an eventfs_inode that is already gone. With a pathwalk held up in tracefs_d_revalidate() while the dentry goes away: BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90 Read of size 1 at addr ff1100010152d8d0 by task walker/97 Call Trace: <TASK> tracefs_d_revalidate+0x76/0x90 lookup_fast+0x320/0x640 path_lookupat+0x160/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 vfs_fstatat+0x4d/0x90 __do_sys_newfstatat+0xa0/0x100 do_syscall_64+0x10e/0x5e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: __kmalloc_cache_noprof+0x249/0x560 eventfs_create_dir+0x7a/0x590 event_create_dir+0x2fb/0xcf0 trace_add_event_call+0xbf/0x150 [...] Freed by task 11: kfree+0x1db/0x5b0 srcu_invoke_callbacks+0x3a3/0x620 process_one_work+0x937/0x1810 worker_thread+0x4f1/0xd60 Before commit 8e556432477e ("eventfs: Use SRCU for freeing eventfs_inodes") release_ei() used call_rcu(), which covered the walker, while eventfs_iterate() needs the SRCU grace period. Wait for both and chain call_rcu() from the SRCU callback. | ||||
| CVE-2026-99171 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: free the sbi after a grace period If the "nocase" mount option ntfs3 uses custom hash and dentry compare functions. Both access ntfs3 superblock private information in rcu pathwalk. ntfs_put_super() and ntfs3_kill_sb() drop the info without any rcu delay. A lookup that's still inside the filesystem when the last reference to the mount is dropped causes a UAF. With a pathwalk held up in ntfs_d_hash() while the last reference to the mount goes away: BUG: KASAN: slab-use-after-free in ntfs_nls_to_utf16+0x752/0x940 Read of size 8 at addr ff1100010453c850 by task walker/99 Call Trace: <TASK> ntfs_nls_to_utf16+0x752/0x940 ntfs_d_hash+0x22b/0x500 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 95: __kmalloc_cache_noprof+0x249/0x560 ntfs_init_fs_context+0x2db/0x5a0 alloc_fs_context+0x52e/0xc70 [...] Freed by task 98: kfree+0x1db/0x5b0 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 task_work_run+0x131/0x250 The bug is currently masked by the grace period in namespace_unlock() for umount(2). Keep the necessary information until the filesystem private info is freed and free it with an rcu delay. ntfs3_free_sbi() now runs from an rcu callback and drops the upcase table via ntfs_put_shared(). So switch s_shared_lock over to spin_lock_bh(). Otherwise the callback can deadlock against a task holding the lock on the same cpu. | ||||
| CVE-2026-99169 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: futex: Fix mm reuse handling for FUT_OFF_MMSHARED A FUT_OFF_MMSHARED futex is a shared futex that refers to an MM. It is possible for a process to wait on a shared futex with a different MM because a FUT_OFF_INODE waiter can be requeued onto a FUT_OFF_MMSHARED futex by another process. This can cause FUT_OFF_MMSHARED waiters on a freed MM to consume wakeups intended for a newly allocated MM at the same address. Fix it by keying FUT_OFF_MMSHARED using a unique 64-bit per-MM ID. Leave private futexes as before to avoid influencing the performance of the hotpath. (Multi-threaded processes typically implicitly use FUT_OFF_MMSHARED by setting clear_child_tid such that it points into anonymous memory, which causes mm_release() in a multi-threaded mm to perform FUTEX_WAKE.) | ||||
| CVE-2026-99167 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fix use-after-free in __tcf_action_put() __tcf_action_put() decrements the reference count before decrementing the binding count. Another thread can free the action between these operations, causing the binding-count update to access freed memory. KASAN reports it as: BUG: KASAN: slab-use-after-free in __tcf_action_put+0x327/0x340 Write of size 4 at addr ff11000000d46420 by task tc-put-pause/64 Hold the action IDR mutex across both counter updates and IDR removal, keeping cleanup outside the lock. | ||||
| CVE-2026-99166 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: rds: fix uninitialized trans dereference in CM event handler rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but the event switch dereferences it: unconditionally in the RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(), and (with a connection context) in the ROUTE_RESOLVED and ESTABLISHED cases. An RDS listener on an iWARP device therefore crashes the kernel as soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO the wild load becomes a NULL dereference at offset 0xa0 (&trans->cm_handle_connect) in the iw_cm_wq workqueue. GCC masks the bug in default builds by folding the uninitialized load into &rds_ib_transport; Clang-built kernels take the real uninitialized path and oops. The active side can land on a non-IB device too: the id that rds_ib_conn_path_connect() creates is not restricted to a node type, so rdma_resolve_addr() binds it to whichever device serves the local address, and an iWARP RNIC on the same netdev qualifies. The crash there is different: resolving a route on an iWARP id never fills in cm_id->route.path_rec, and the ROUTE_RESOLVED case writes path_rec[0].sl before it calls into the transport. The iWARP transport was dropped long ago and IB is the only transport left, so make that explicit: initialize trans to &rds_ib_transport at declaration, drop the conditional assignment, reject a connect request that arrives on a non-IB device, and drop a connection whose address resolved to one instead of resolving a route on it. The rejection is limited to RDMA_CM_EVENT_CONNECT_REQUEST on purpose: a non-zero return from the handler makes rdma_cm destroy the id the event was delivered on, which is right for the request's freshly created id but would free a connection id that RDS still owns for any other event. On the active side the id stays ic->i_cm_id and the connection's shutdown destroys it, so that case returns 0. [achender: reject only on RDMA_CM_EVENT_CONNECT_REQUEST instead of bailing out for every event on a non-IB device, so that rdma_cm does not destroy connection ids RDS still tracks; drop a connection whose address resolved to a non-IB device before a route is resolved on it; changelog adjusted] | ||||
| CVE-2026-99165 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate output stream after association connect wait When message interleaving is enabled, the first send waits for association establishment before building its data chunks. The wait drops the socket lock, and handshake processing can reduce the output stream count to the peer-advertised inbound stream count. sctp_stream_init() then frees the extension of every removed stream. The sender resumes with the stream that it checked before the wait. If the peer removed that stream, sctp_outq_tail() later dereferences its NULL extension. Fatal-oops policies then panic the host. KASAN: null-ptr-deref in range [0x38-0x3f] RIP: sctp_outq_tail+0x49e/0xaa0 Call Trace: sctp_primitive_SEND sctp_sendmsg_to_asoc sctp_sendmsg A range check alone is insufficient. Stream reconfiguration can grow the output count again while the lock is released without recreating extensions freed by the earlier shrink. The stream can then be in range while its extension remains NULL. The send-buffer wait has the same issue. Factor the range and extension checks into a helper and repeat both after each send-path wait that drops the socket lock. Once the lock is reacquired, the validation remains stable through data creation and queueing. If validation fails after the connect wait, the auto-created association is already established. Return ESRCH so the existing caller path keeps it under state-machine ownership instead of freeing it directly, which would leave protocol, counter and socket state inconsistent. | ||||