Export limit exceeded: 417557 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26069 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26069 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23138 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Add recursion protection in kernel stack trace recording A bug was reported about an infinite recursion caused by tracing the rcu events with the kernel stack trace trigger enabled. The stack trace code called back into RCU which then called the stack trace again. Expand the ftrace recursion protection to add a set of bits to protect events from recursion. Each bit represents the context that the event is in (normal, softirq, interrupt and NMI). Have the stack trace code use the interrupt context to protect against recursion. Note, the bug showed an issue in both the RCU code as well as the tracing stacktrace code. This only handles the tracing stack trace side of the bug. The RCU fix will be handled separately. | ||||
| CVE-2026-23137 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: of: unittest: Fix memory leak in unittest_data_add() In unittest_data_add(), if of_resolve_phandles() fails, the allocated unittest_data is not freed, leading to a memory leak. Fix this by using scope-based cleanup helper __free(kfree) for automatic resource cleanup. This ensures unittest_data is automatically freed when it goes out of scope in error paths. For the success path, use retain_and_null_ptr() to transfer ownership of the memory to the device tree and prevent double freeing. | ||||
| CVE-2026-23118 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix data-race warning and potential load/store tearing Fix the following: BUG: KCSAN: data-race in rxrpc_peer_keepalive_worker / rxrpc_send_data_packet which is reporting an issue with the reads and writes to ->last_tx_at in: conn->peer->last_tx_at = ktime_get_seconds(); and: keepalive_at = peer->last_tx_at + RXRPC_KEEPALIVE_TIME; The lockless accesses to these to values aren't actually a problem as the read only needs an approximate time of last transmission for the purposes of deciding whether or not the transmission of a keepalive packet is warranted yet. Also, as ->last_tx_at is a 64-bit value, tearing can occur on a 32-bit arch. Fix both of these by switching to an unsigned int for ->last_tx_at and only storing the LSW of the time64_t. It can then be reconstructed at need provided no more than 68 years has elapsed since the last transmission. | ||||
| CVE-2026-23050 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pNFS: Fix a deadlock when returning a delegation during open() Ben Coddington reports seeing a hang in the following stack trace: 0 [ffffd0b50e1774e0] __schedule at ffffffff9ca05415 1 [ffffd0b50e177548] schedule at ffffffff9ca05717 2 [ffffd0b50e177558] bit_wait at ffffffff9ca061e1 3 [ffffd0b50e177568] __wait_on_bit at ffffffff9ca05cfb 4 [ffffd0b50e1775c8] out_of_line_wait_on_bit at ffffffff9ca05ea5 5 [ffffd0b50e177618] pnfs_roc at ffffffffc154207b [nfsv4] 6 [ffffd0b50e1776b8] _nfs4_proc_delegreturn at ffffffffc1506586 [nfsv4] 7 [ffffd0b50e177788] nfs4_proc_delegreturn at ffffffffc1507480 [nfsv4] 8 [ffffd0b50e1777f8] nfs_do_return_delegation at ffffffffc1523e41 [nfsv4] 9 [ffffd0b50e177838] nfs_inode_set_delegation at ffffffffc1524a75 [nfsv4] 10 [ffffd0b50e177888] nfs4_process_delegation at ffffffffc14f41dd [nfsv4] 11 [ffffd0b50e1778a0] _nfs4_opendata_to_nfs4_state at ffffffffc1503edf [nfsv4] 12 [ffffd0b50e1778c0] _nfs4_open_and_get_state at ffffffffc1504e56 [nfsv4] 13 [ffffd0b50e177978] _nfs4_do_open at ffffffffc15051b8 [nfsv4] 14 [ffffd0b50e1779f8] nfs4_do_open at ffffffffc150559c [nfsv4] 15 [ffffd0b50e177a80] nfs4_atomic_open at ffffffffc15057fb [nfsv4] 16 [ffffd0b50e177ad0] nfs4_file_open at ffffffffc15219be [nfsv4] 17 [ffffd0b50e177b78] do_dentry_open at ffffffff9c09e6ea 18 [ffffd0b50e177ba8] vfs_open at ffffffff9c0a082e 19 [ffffd0b50e177bd0] dentry_open at ffffffff9c0a0935 The issue is that the delegreturn is being asked to wait for a layout return that cannot complete because a state recovery was initiated. The state recovery cannot complete until the open() finishes processing the delegations it was given. The solution is to propagate the existing flags that indicate a non-blocking call to the function pnfs_roc(), so that it knows not to wait in this situation. | ||||
| CVE-2026-23004 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list() syzbot was able to crash the kernel in rt6_uncached_list_flush_dev() in an interesting way [1] Crash happens in list_del_init()/INIT_LIST_HEAD() while writing list->prev, while the prior write on list->next went well. static inline void INIT_LIST_HEAD(struct list_head *list) { WRITE_ONCE(list->next, list); // This went well WRITE_ONCE(list->prev, list); // Crash, @list has been freed. } Issue here is that rt6_uncached_list_del() did not attempt to lock ul->lock, as list_empty(&rt->dst.rt_uncached) returned true because the WRITE_ONCE(list->next, list) happened on the other CPU. We might use list_del_init_careful() and list_empty_careful(), or make sure rt6_uncached_list_del() always grabs the spinlock whenever rt->dst.rt_uncached_list has been set. A similar fix is neeed for IPv4. [1] BUG: KASAN: slab-use-after-free in INIT_LIST_HEAD include/linux/list.h:46 [inline] BUG: KASAN: slab-use-after-free in list_del_init include/linux/list.h:296 [inline] BUG: KASAN: slab-use-after-free in rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline] BUG: KASAN: slab-use-after-free in rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020 Write of size 8 at addr ffff8880294cfa78 by task kworker/u8:14/3450 CPU: 0 UID: 0 PID: 3450 Comm: kworker/u8:14 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: netns cleanup_net Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 INIT_LIST_HEAD include/linux/list.h:46 [inline] list_del_init include/linux/list.h:296 [inline] rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline] rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020 addrconf_ifdown+0x143/0x18a0 net/ipv6/addrconf.c:3853 addrconf_notify+0x1bc/0x1050 net/ipv6/addrconf.c:-1 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] netif_close_many+0x29c/0x410 net/core/dev.c:1785 unregister_netdevice_many_notify+0xb50/0x2330 net/core/dev.c:12353 ops_exit_rtnl_list net/core/net_namespace.c:187 [inline] ops_undo_list+0x3dc/0x990 net/core/net_namespace.c:248 cleanup_net+0x4de/0x7b0 net/core/net_namespace.c:696 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> Allocated by task 803: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 unpoison_slab_object mm/kasan/common.c:340 [inline] __kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366 kasan_slab_alloc include/linux/kasan.h:253 [inline] slab_post_alloc_hook mm/slub.c:4953 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x18d/0x6c0 mm/slub.c:5270 dst_alloc+0x105/0x170 net/core/dst.c:89 ip6_dst_alloc net/ipv6/route.c:342 [inline] icmp6_dst_alloc+0x75/0x460 net/ipv6/route.c:3333 mld_sendpack+0x683/0xe60 net/ipv6/mcast.c:1844 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entr ---truncated--- | ||||
| CVE-2026-100077 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Recover HW before retire hung submit During recovery, it is not safe to retire the hung submit before we recover the GPU. Retiring the submit triggers BO free and that can result in GPU pagefaults since the GPU may be actively accessing those BOs. To fix this, retire the submits after gpu recovery is complete in recover_worker(). Patchwork: https://patchwork.freedesktop.org/patch/730655/ | ||||
| CVE-2026-100076 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix xmit_frame/xmit_buf leaks on mgnt-frame error paths issue_beacon(), issue_probersp() and issue_asocrsp() obtain a management xmit_frame together with its xmit_buf from the driver's fixed-size management-TX pools via alloc_mgtxmitframe(). On the normal path the frame is handed to dump_mgntframe(), which transfers ownership and eventually returns both objects to their pools (the frame and, for beacons, the buf in rtl8723bs_mgnt_xmit(); other bufs via the pending-xmitbuf/TX-completion path). Several error/edge paths return early after a successful alloc_mgtxmitframe() but before dump_mgntframe(), so ownership is never transferred and neither object is freed: - issue_beacon(): beacon larger than 512 bytes - issue_probersp(): cur_network->ie_length > MAX_IE_SZ - issue_probersp(): kzalloc() of the SSID scratch buffer fails - issue_asocrsp(): pkt_type is neither ASSOCRSP nor REASSOCRSP Because alloc_mgtxmitframe() removes the frame and buf from their free lists (list_del_init) without placing them on any pending list, an orphaned pair is on no list and referenced by nobody, so it is only reclaimed at driver teardown. Repeated hits progressively exhaust the management-TX pools until alloc_mgtxmitframe() returns NULL and the interface can no longer send beacons or probe/assoc responses. Free the frame and buffer on these paths, matching the existing correct error handling in issue_assocreq(). | ||||
| CVE-2025-71313 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Add missing NULL check for alloc_workqueue() alloc_workqueue() can return NULL on memory allocation failure. Without proper error checking, this may lead to a NULL pointer dereference when queue_work() is later called with the NULL workqueue pointer in epf_ntb_epc_init(). Add a NULL check immediately after alloc_workqueue() and return -ENOMEM on failure to prevent the driver from loading with an invalid workqueue pointer. | ||||
| CVE-2025-71289 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: handle attr_set_size() errors when truncating files If attr_set_size() fails while truncating down, the error is silently ignored and the inode may be left in an inconsistent state. | ||||
| CVE-2025-71285 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels MHI stack offers the 'auto_queue' feature, which allows the MHI stack to auto queue the buffers for the RX path (DL channel). Though this feature simplifies the client driver design, it introduces race between the client drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback' for the DL channel may get called before the client driver is fully probed. This means, by the time the dl_callback gets called, the client driver's structures might not be initialized, leading to NULL ptr dereference. Currently, the drivers have to workaround this issue by initializing the internal structures before calling mhi_prepare_for_transfer_autoqueue(). But even so, there is a chance that the client driver's internal code path may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is called, leading to similar NULL ptr dereference. This issue has been reported on the Qcom X1E80100 CRD machines affecting boot. So to properly fix all these races, drop the MHI 'auto_queue' feature altogether and let the client driver (QRTR) manage the RX buffers manually. In the QRTR driver, queue the RX buffers based on the ring length during probe and recycle the buffers in 'dl_callback' once they are consumed. This also warrants removing the setting of 'auto_queue' flag from controller drivers. Currently, this 'auto_queue' feature is only enabled for IPCR DL channel. So only the QRTR client driver requires the modification. | ||||
| CVE-2025-71273 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band() Simplify the code by using device managed memory allocations. This also fixes a memory leak in rtw_register_hw(). The supported bands were not freed in the error path. Copied from commit 145df52a8671 ("wifi: rtw89: Convert rtw89_core_set_supported_band to use devm_*"). | ||||
| CVE-2025-71227 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't WARN for connections on invalid channels It's not clear (to me) how exactly syzbot managed to hit this, but it seems conceivable that e.g. regulatory changed and has disabled a channel between scanning (channel is checked to be usable by cfg80211_get_ies_channel_number) and connecting on the channel later. With one scenario that isn't covered elsewhere described above, the warning isn't good, replace it with a (more informative) error message. | ||||
| CVE-2025-71198 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without event detection The st_lsm6dsx_acc_channels array of struct iio_chan_spec has a non-NULL event_spec field, indicating support for IIO events. However, event detection is not supported for all sensors, and if userspace tries to configure accelerometer wakeup events on a sensor device that does not support them (e.g. LSM6DS0), st_lsm6dsx_write_event() dereferences a NULL pointer when trying to write to the wakeup register. Define an additional struct iio_chan_spec array whose members have a NULL event_spec field, and use this array instead of st_lsm6dsx_acc_channels for sensors without event detection capability. | ||||
| CVE-2025-71193 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qusb2: Fix NULL pointer dereference on early suspend Enabling runtime PM before attaching the QPHY instance as driver data can lead to a NULL pointer dereference in runtime PM callbacks that expect valid driver data. There is a small window where the suspend callback may run after PM runtime enabling and before runtime forbid. This causes a sporadic crash during boot: ``` Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a1 [...] CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.7+ #116 PREEMPT Workqueue: pm pm_runtime_work pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : qusb2_phy_runtime_suspend+0x14/0x1e0 [phy_qcom_qusb2] lr : pm_generic_runtime_suspend+0x2c/0x44 [...] ``` Attach the QPHY instance as driver data before enabling runtime PM to prevent NULL pointer dereference in runtime PM callbacks. Reorder pm_runtime_enable() and pm_runtime_forbid() to prevent a short window where an unnecessary runtime suspend can occur. Use the devres-managed version to ensure PM runtime is symmetrically disabled during driver removal for proper cleanup. | ||||
| CVE-2025-71184 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix NULL dereference on root when tracing inode eviction When evicting an inode the first thing we do is to setup tracing for it, which implies fetching the root's id. But in btrfs_evict_inode() the root might be NULL, as implied in the next check that we do in btrfs_evict_inode(). Hence, we either should set the ->root_objectid to 0 in case the root is NULL, or we move tracing setup after checking that the root is not NULL. Setting the rootid to 0 at least gives us the possibility to trace this call even in the case when the root is NULL, so that's the solution taken here. | ||||
| CVE-2025-71152 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: properly keep track of conduit reference Problem description ------------------- DSA has a mumbo-jumbo of reference handling of the conduit net device and its kobject which, sadly, is just wrong and doesn't make sense. There are two distinct problems. 1. The OF path, which uses of_find_net_device_by_node(), never releases the elevated refcount on the conduit's kobject. Nominally, the OF and non-OF paths should result in objects having identical reference counts taken, and it is already suspicious that dsa_dev_to_net_device() has a put_device() call which is missing in dsa_port_parse_of(), but we can actually even verify that an issue exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command "before" and "after" applying this patch: (unbind the conduit driver for net device eno2) echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind we see these lines in the output diff which appear only with the patch applied: kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000) kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000) 2. After we find the conduit interface one way (OF) or another (non-OF), it can get unregistered at any time, and DSA remains with a long-lived, but in this case stale, cpu_dp->conduit pointer. Holding the net device's underlying kobject isn't actually of much help, it just prevents it from being freed (but we never need that kobject directly). What helps us to prevent the net device from being unregistered is the parallel netdev reference mechanism (dev_hold() and dev_put()). Actually we actually use that netdev tracker mechanism implicitly on user ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link(). But time still passes at DSA switch probe time between the initial of_find_net_device_by_node() code and the user port creation time, time during which the conduit could unregister itself and DSA wouldn't know about it. So we have to run of_find_net_device_by_node() under rtnl_lock() to prevent that from happening, and release the lock only with the netdev tracker having acquired the reference. Do we need to keep the reference until dsa_unregister_switch() / dsa_switch_shutdown()? 1: Maybe yes. A switch device will still be registered even if all user ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal"), and the cpu_dp->conduit pointers remain valid. I haven't audited all call paths to see whether they will actually use the conduit in lack of any user port, but if they do, it seems safer to not rely on user ports for that reference. 2. Definitely yes. We support changing the conduit which a user port is associated to, and we can get into a situation where we've moved all user ports away from a conduit, thus no longer hold any reference to it via the net device tracker. But we shouldn't let it go nonetheless - see the next change in relation to dsa_tree_find_first_conduit() and LAG conduits which disappear. We have to be prepared to return to the physical conduit, so the CPU port must explicitly keep another reference to it. This is also to say: the user ports and their CPU ports may not always keep a reference to the same conduit net device, and both are needed. As for the conduit's kobject for the /sys/class/net/ entry, we don't care about it, we can release it as soon as we hold the net device object itself. History and blame attribution ----------------------------- The code has been refactored so many times, it is very difficult to follow and properly attribute a blame, but I'll try to make a short history which I hope to be correct. We have two distinct probing paths: - one for OF, introduced in 2016 i ---truncated--- | ||||
| CVE-2025-71138 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add missing NULL pointer check for pingpong interface It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a single place the check is missing. Also use convenient locals instead of phys_enc->* where available. Patchwork: https://patchwork.freedesktop.org/patch/693860/ | ||||
| CVE-2025-71109 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: ftrace: Fix memory corruption when kernel is located beyond 32 bits Since commit e424054000878 ("MIPS: Tracing: Reduce the overhead of dynamic Function Tracer"), the macro UASM_i_LA_mostly has been used, and this macro can generate more than 2 instructions. At the same time, the code in ftrace assumes that no more than 2 instructions can be generated, which is why it stores them in an int[2] array. However, as previously noted, the macro UASM_i_LA_mostly (and now UASM_i_LA) causes a buffer overflow when _mcount is beyond 32 bits. This leads to corruption of the variables located in the __read_mostly section. This corruption was observed because the variable __cpu_primary_thread_mask was corrupted, causing a hang very early during boot. This fix prevents the corruption by avoiding the generation of instructions if they could exceed 2 instructions in length. Fortunately, insn_la_mcount is only used if the instrumented code is located outside the kernel code section, so dynamic ftrace can still be used, albeit in a more limited scope. This is still preferable to corrupting memory and/or crashing the kernel. | ||||
| CVE-2025-71089 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu: disable SVA when CONFIG_X86 is set Patch series "Fix stale IOTLB entries for kernel address space", v7. This proposes a fix for a security vulnerability related to IOMMU Shared Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel page table entries. When a kernel page table page is freed and reallocated for another purpose, the IOMMU might still hold stale, incorrect entries. This can be exploited to cause a use-after-free or write-after-free condition, potentially leading to privilege escalation or data corruption. This solution introduces a deferred freeing mechanism for kernel page table pages, which provides a safe window to notify the IOMMU to invalidate its caches before the page is reused. This patch (of 8): In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardware shares and walks the CPU's page tables. The x86 architecture maps the kernel's virtual address space into the upper portion of every process's page table. Consequently, in an SVA context, the IOMMU hardware can walk and cache kernel page table entries. The Linux kernel currently lacks a notification mechanism for kernel page table changes, specifically when page table pages are freed and reused. The IOMMU driver is only notified of changes to user virtual address mappings. This can cause the IOMMU's internal caches to retain stale entries for kernel VA. Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise when kernel page table pages are freed and later reallocated. The IOMMU could misinterpret the new data as valid page table entries. The IOMMU might then walk into attacker-controlled memory, leading to arbitrary physical memory DMA access or privilege escalation. This is also a Write-After-Free issue, as the IOMMU will potentially continue to write Accessed and Dirty bits to the freed memory while attempting to walk the stale page tables. Currently, SVA contexts are unprivileged and cannot access kernel mappings. However, the IOMMU will still walk kernel-only page tables all the way down to the leaf entries, where it realizes the mapping is for the kernel and errors out. This means the IOMMU still caches these intermediate page table entries, making the described vulnerability a real concern. Disable SVA on x86 architecture until the IOMMU can receive notification to flush the paging cache before freeing the CPU kernel page table pages. | ||||
| CVE-2025-71074 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: functionfs: fix the open/removal races ffs_epfile_open() can race with removal, ending up with file->private_data pointing to freed object. There is a total count of opened files on functionfs (both ep0 and dynamic ones) and when it hits zero, dynamic files get removed. Unfortunately, that removal can happen while another thread is in ffs_epfile_open(), but has not incremented the count yet. In that case open will succeed, leaving us with UAF on any subsequent read() or write(). The root cause is that ffs->opened is misused; atomic_dec_and_test() vs. atomic_add_return() is not a good idea, when object remains visible all along. To untangle that * serialize openers on ffs->mutex (both for ep0 and for dynamic files) * have dynamic ones use atomic_inc_not_zero() and fail if we had zero ->opened; in that case the file we are opening is doomed. * have the inodes of dynamic files marked on removal (from the callback of simple_recursive_removal()) - clear ->i_private there. * have open of dynamic ones verify they hadn't been already removed, along with checking that state is FFS_ACTIVE. | ||||