Export limit exceeded: 417557 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417557 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417557 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417557 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99031 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: avoid recursive multicast port cleanup br_multicast_sg_del_exclude_ports() removes automatically added STAR_EXCL port groups by calling br_multicast_del_pg(). For S,G entries, that deletion calls back into br_multicast_sg_del_exclude_ports(), so a large number of STAR_EXCL ports consumes one kernel stack frame per port and can hit the stack guard page. Keep the complete port-group deletion path for cleanup, but suppress the S,G exclude-port cleanup while that helper is already walking the same entry. Normal deletion callers retain the existing behavior. | ||||
| CVE-2026-99027 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: team: stop reusing skb after queue override A nonzero dev_queue_xmit() result does not return ownership of the skb. When an override port's qdisc drops it, the queue override helper used to try another port or the mode transmit op with the freed skb. Return the handoff decision separately from transmit success. Select only the first override port under RCU and stop after handing it the skb, regardless of the lower transmit result. Keep the existing success and drop accounting. BUG: KASAN: slab-use-after-free in sk_skb_reason_drop Write of size 4 by task poc/5040 sk_skb_reason_drop (net/core/skbuff.c:1240) dev_kfree_skb_any_reason (net/core/dev.c:3470) ab_transmit (drivers/net/team/team_mode_activebackup.c:49) team_xmit (drivers/net/team/team_core.c:1849) __dev_direct_xmit (net/core/dev.c:4934) Freed by task 5040: __tcf_kfree_skb_list (net/sched/sch_generic.c:43) __dev_queue_xmit (net/core/dev.c:4831) team_xmit (drivers/net/team/team_core.c:1846) Kernel panic - not syncing: KASAN: panic_on_warn set ... | ||||
| CVE-2026-99025 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix soft lockup in the netlink flow dump A production compute node carrying a few thousand datapath flows hit a soft lockup inside a single netlink flow dump and panicked. ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it emits, and that releases stats->lock with spin_unlock_bh() once per CPU that has touched the flow. Every release is a local_bh_enable(), and each one runs the pending softirq backlog in the dumping thread's own context. The skb bounds the flows one callback emits, but not the softirq work it absorbs. On a CPU that carries the box's packet load the backlog refills as fast as it drains, so the dumping thread becomes that CPU's softirq engine. It never sleeps and it has no reschedule point, so under voluntary preemption nothing can take the CPU away from it: neither the ksoftirqd the kernel woke to take the work over, nor the stopper thread the softlockup detector dispatches to refresh its timestamp. Hold BH off across the whole callback instead, the way ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop draining softirqs. The loop already runs under rcu_read_lock() and cannot sleep. What it gives up is preemption under CONFIG_PREEMPT, since a BH-off region is not preemptible outside PREEMPT_RT. The region stays short: the skb caps the flows one callback emits, and empty buckets cost no skb space but are each visited once per dump, as the cursor only moves forward. The table grows on insert and shrinks only on flush, so the walk is bounded by the largest flow count the datapath has held. The softirq backlog the callback used to absorb has no bound at all. | ||||
| CVE-2026-99024 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: optee: register TEE devices only once fully initialized optee_probe() called tee_device_register() on both the client and the supplicant device before the rest of struct optee had been initialized. tee_device_register() calls cdev_device_add(), which does two things at once: it creates /dev/tee0 and /dev/teepriv0, and it links the device into the tee class so that class_find_device() can find it. From that moment on the device is reachable both from user space via tee_open() and from kernel space via tee_client_open_context(). The only gate in teedev_open() is tee_device_get(), which merely checks that teedev->desc is non-NULL, which was already set by tee_device_alloc(). Therefore, there is effectively no gate at all. A context opened in that window can run against a struct optee where - optee->call_queue.mutex is not initialized by optee_cq_init() - optee->supp mutex and completions is not initialized by optee_supp_init() - optee->rpmb_dev_mutex is not initialized yet, - the message argument cache is not initialized by optee_shm_arg_cache_init() - optee->ctx is still NULL Any open session or invoke during this window takes uninitialized mutexes and dereferences a NULL pointer. Fix it by moving both tee_device_register() calls down to the point where all of struct optee is set up. [JW: adding fixes and cc] | ||||
| CVE-2026-99022 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: ltc3676: don't read the write-only HRST and CLIRQ registers HRST (0x1e) and CLIRQ (0x1f) are write-only command strobes. Writing HRST triggers a hard reset of the chip and writing CLIRQ clears the interrupt; reading them returns nothing useful, and the read itself fires the command. The result is that a plain register dump resets the board: cat /sys/kernel/debug/regmap/2-003c/registers walks every readable register, hits HRST, and the board reboots. Split the callback back in two so HRST and CLIRQ stay writable but are no longer readable. The readable range is left unchanged (LTC3676_BUCK1 ... LTC3676_IRQSTAT). | ||||
| CVE-2026-99019 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ch: Do not keep references to data transfer element devices ch_readconfig() looks up the scsi_device of every data transfer element whose SCSI id the changer reports in READ ELEMENT STATUS, and stores it in ch->dt[]. scsi_device_lookup() takes a reference, and nothing ever drops it: ch_destroy() frees the array with kfree(). ch->dt[] is read nowhere else - it only supplies the vendor, model and revision printed in the same loop. Once such a drive is removed, its scsi_device can never be released. It stays on the host's device list at its address, so a new device there is refused by anything that walks the list - target_core_pscsi reports "scsi_device_get() failed for H:C:T:L" - and the low-level driver's module can no longer be unloaded. Only a reboot recovers. It shows with any changer that reports its drives' ids; with the mhvtl virtual library (IBM 3573-TL personality), each create and remove of a library with four drives leaves four references behind, counted by the module's use count in lsmod. With ch not bound the count is unchanged, and with this patch applied it is unchanged too. Drop the reference as soon as the name has been printed, and remove the now unused dt[] array. That also removes the array leaked when ch_probe() fails after ch_readconfig(). The same leak was reported with an RFC patch in 2022, which was not merged. | ||||
| CVE-2026-99015 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Serialize dead-device detachment Rebinding an HCI socket after its controller is unregistered can race monitor control replay and crash the kernel. hci_sock_bind() clears hci_pi(sk)->hdev and drops the device reference under only the socket lock, whereas send_monitor_control_replay() holds hci_sk_list.lock for reading. Replay can observe a non-NULL hdev, then bind can clear it and drop the last reference before create_monitor_ctrl_open() reads hdev->id. This can cause a NULL pointer dereference if the pointer is reloaded, or a use-after-free if the old pointer is retained. The kernel reported: KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] RIP: 0010:create_monitor_ctrl_open+0x579/0x800 Call Trace: hci_sock_bind+0xd96/0x1190 __sys_bind+0x166/0x200 __x64_sys_bind+0x6d/0xb0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The same missing serialization lets hci_send_to_sock() select a socket for the old device and queue its frame after bind has detached the socket or installed a new binding. Take hci_sk_list.lock for writing when clearing the device pointer and resetting the socket state. This waits for existing replay and delivery readers to finish before detachment and prevents later readers from using the old binding. Keep hci_dev_put() outside the critical section because the final device release can sleep. | ||||
| CVE-2026-99012 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Serialize concurrent connect calls iso_sock_connect() checks the socket state before taking the socket lock and drops the lock again before setting up a connection. Two callers can both pass the admission check while the socket is open or bound. Caller A can copy its destination for route selection, then caller B can replace the socket destination before A binds or connects the CIS. A then uses B's destination with the route selected for its own request. B can also proceed after A attaches a connection and sets BT_CONNECT. For deferred BIS setup, B can bind a second BIS and overwrite iso_pi(sk)->conn, leaving the first connection's reference and conn->sk back-pointer stranded. Concurrent CIS connects can likewise replace the socket's connection. Later teardown only detaches the current connection, so a callback on the old connection can race with socket release and access a freed socket. KASAN reported: BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0 Call Trace: iso_sock_hold+0xf7/0x1b0 iso_conn_del+0x7b/0x1d0 iso_connect_cfm+0x186/0x16a0 hci_conn_failed+0x154/0x280 hci_abort_conn_sync+0x3dc/0x7d0 hci_cmd_sync_work+0x173/0x300 Allocated by task 121: sk_alloc+0x2b/0x6d0 bt_sock_alloc+0x29/0x370 iso_sock_alloc.constprop.0+0x19/0x300 iso_sock_create+0x94/0x100 Freed by task 121: kfree+0x121/0x3c0 __sk_destruct+0x42b/0x540 iso_sock_release+0x29d/0x340 __sock_release+0xa1/0x260 Check admission under the socket lock and mark the connect operation in progress before publishing its destination. Keep that flag set across route lookup and connection setup, rejecting another connect with -EBADFD before it can change the destination or attach a connection. Clear the flag after either helper returns, including on failure, so a failed setup can be retried. A separate flag is needed because the socket lock must be released before acquiring the HCI device lock, while BT_CONNECT requires an attached connection. Keep the existing state transitions and the deferred CIS completion through iso_sock_recvmsg(). Reject an existing socket attachment in __iso_chan_add() before taking a new reference or publishing either pointer, so every caller preserves the connection association. Keep the same-socket, same-connection success case for deferred CIS setup. Reject an attached socket before BIS setup so a reusable BIS is not claimed before the attachment is rejected. In CIS setup, reject a different HCI connection before iso_conn_add() and drop the per-attempt HCI hold directly. An unowned iso_conn may still carry another reference after detachment, so its destruction cannot be relied on to release that hold. iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock, so the temporary iso_conn_put() frees the ISO candidate and drops its HCI hold on rejection. iso_conn_ready() uses a freshly allocated, unpublished child with no connection, making the socket-side rejection unreachable. | ||||
| CVE-2026-99010 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: free the skb when the DLC has no owner rfcomm_recv_data() hands the skb to d->data_ready() and returns 0 without freeing it, so the callback owns the skb from that point on. The tty implementation frees it when the DLC has been detached from its device: static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb) { struct rfcomm_dev *dev = dlc->owner; if (!dev) { kfree_skb(skb); return; } The socket implementation returns without freeing it, and the skb is leaked. A connected DLC can have no owner: rfcomm_sock_destruct() clears d->owner, while the DLC itself stays on the session until it is closed. Data frames that arrive in that window still find d->state == BT_CONNECTED in rfcomm_recv_data() and are handed to the callback, one leaked skb each. The leak does not stop on its own either. The remote runs out of credits only once RFCOMM_RX_THROTTLED is set, and for a socket the only place that sets it is rfcomm_sk_data_ready() itself, below the return. rfcomm_process_dlcs() keeps granting credits, so the remote keeps sending and the leak keeps growing. Free the skb, as the tty side does. | ||||
| CVE-2026-99009 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex An RFCOMM connect() issued while a BR/EDR link is being authenticated makes lockdep report a circular dependency, and the reported cycle is a real AB/BA between rfcomm_mutex and hdev->lock. rfcomm_security_cfm() is called from the HCI event path, which already holds hdev->lock: hci_rx_work() hci_event_packet() hci_cc_read_enc_key_size() [hdev->lock] hci_encrypt_cfm() [hci_cb_list_lock] rfcomm_security_cfm() [rfcomm_mutex] while an RFCOMM connect() from userspace takes the same two locks the other way round: rfcomm_sock_connect() rfcomm_dlc_open() [rfcomm_mutex] __rfcomm_dlc_open() rfcomm_session_create() kernel_connect() l2cap_sock_connect() l2cap_chan_connect() [hdev->lock] WARNING: possible circular locking dependency detected kworker/u131:1/1128 is trying to acquire lock: rfcomm_mutex, at: rfcomm_security_cfm+0x31/0x3e0 [rfcomm] but task is already holding lock: hci_cb_list_lock, at: hci_cc_read_enc_key_size+0x1d2/0xcc0 Chain exists of: rfcomm_mutex --> &hdev->lock --> hci_cb_list_lock hci_auth_complete_evt() and hci_encrypt_change_evt() reach the callback the same way. Both orders have to be seen in the same boot, which is why a BR/EDR connection alone is not enough to show it: a session set up by the remote side is created by rfcomm_accept_connection() in krfcommd, which calls kernel_accept() and never takes hdev->lock under rfcomm_mutex. Connecting a device that authenticates and encrypts the link and then calling connect() on an RFCOMM socket towards any address - the connect does not have to succeed, the order is recorded before the page timeout - reports it every time. Only the session socket has to be connected with the lock held, and it does not: nothing else can see the socket before it is put on the session list. So connect it first and take rfcomm_mutex afterwards, which removes the rfcomm_mutex -> hdev->lock order for good, rather than keeping the HCI event path out of rfcomm_mutex. rfcomm_session_create() becomes rfcomm_session_connect(), which returns the connected socket without touching the session list, and rfcomm_dlc_open() adds the session once it holds the lock again. If another opener added a session for the same pair while this socket was connecting, that session is used and this socket is dropped. __rfcomm_dlc_open() now takes the session it should use, and its state check runs after the lock is re-acquired, so a DLC that was opened or closed in the meantime is still handled. Over an existing ACL link the connection can complete before the session reaches the list, and the wakeup from the socket callback is then lost, so krfcommd is woken once the session is visible. Connecting without the lock opens a window in which the socket can be closed. The DLC is not on a session yet, so rfcomm_dlc_close() finds nothing to do and returns without touching it, and rfcomm_dlc_open() would then attach a DLC whose owner is gone. rfcomm_dlc_close() now marks such a DLC with RFCOMM_CLOSED, and rfcomm_dlc_open() checks the mark once it holds rfcomm_mutex again and drops the socket instead of attaching the DLC. The mark is cleared when an open starts, so a DLC that is reused is not affected. This covers both callers of rfcomm_dlc_open(), the socket and the tty layer. | ||||
| CVE-2026-99008 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown syzbot hit a NULL pointer dereference in rfcomm_dev_shutdown() when an RFCOMM tty is closed. rfcomm_dev_add() puts the new device on rfcomm_dev_list first and only then registers the tty device and saves it in dev->tty_dev. If that registration fails, dev->tty_dev is never set at all. The device can be looked up in the meantime, so an open() of /dev/rfcommN gets through rfcomm_tty_install() and attaches to it. When that tty is closed again, rfcomm_dev_shutdown() uses dev->tty_dev without checking it: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] RIP: 0010:rfcomm_dev_shutdown+0x48/0xb0 net/bluetooth/rfcomm/tty.c:131 Call Trace: tty_port_shutdown+0x1bf/0x220 drivers/tty/tty_port.c:372 tty_port_close+0x4e/0x150 drivers/tty/tty_port.c:705 tty_release+0x359/0x1670 drivers/tty/tty_io.c:1718 __fput+0x418/0xa50 fs/file_table.c:512 rfcomm_dev_destruct() already copes with a NULL dev->tty_dev. Add the same check to rfcomm_dev_shutdown(), so the tty device is only moved when it was actually registered. | ||||
| CVE-2026-99007 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: defer setup when fbdev_probe() fails, not just on -EAGAIN __drm_fb_helper_initial_config_and_unlock() calls drm_client_modeset_probe() first, which already fills in each mode_set->mode/num_connectors for every connected output, and only afterwards calls drm_fb_helper_single_fb_probe() to create fb_helper->fb and wire it into those mode_sets via drm_setup_crtcs_fb(). If drm_fb_helper_single_fb_probe() fails with anything other than -EAGAIN (e.g. dev->driver->fbdev_probe() itself fails), the function bails out before drm_setup_crtcs_fb() runs and before setting fb_helper->deferred_setup. The client is left with mode_sets that have a mode and connectors but mode_set->fb == NULL, and nothing marks this fb_helper as needing a retry. __drm_fb_helper_restore_fbdev_mode_unlocked() only skips committing when fb_helper->deferred_setup is set, so a later .restore() call (drm_lastclose() on process exit, in this report) commits the stale mode_set through drm_client_modeset_commit() -> drm_client_modeset_commit_atomic() -> __drm_atomic_helper_set_config(), which hits WARN_ON(!set->fb). Mark fb_helper->deferred_setup on any drm_fb_helper_single_fb_probe() failure, not just -EAGAIN, so restore keeps skipping the commit until a later hotplug event successfully re-probes and re-populates mode_set->fb. The real error code is still returned to the caller unchanged. | ||||
| CVE-2026-99006 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Prevent overstepping exec array boundary It is possible for eb_relocate_parse_slow() to call kvfree() on entries outside the original exec array during following scenario inside eb_relocate_parse_slow(): 1) eb_copy_relocations() allocates as many as eb->buffer_count copies for exec entries; 2) eb_parse() appends up to two VMAs, right after incrementing eb->buffer_count; 3) cleanup under "out" label uses this incremented buffer_count to release relocation pointers from exec array via kvfree(), not from VMA array. To amend this problem, ensure that relocation cleanup uses the original exec object count, excluding the VMAs appended by the command parser. (cherry picked from commit 2a0158925fb943c7ba8f3216e2734952128defc9) | ||||
| CVE-2026-99005 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Unmask interrupts only when ACTIVE is true There is a small race window between intel_rps_boost() reading a stale ACTIVE state and queuing rps->work, where ACTIVE may be changed via asynchronous calls triggered by wakeref drop. This means that rps_work() could be triggered after the GT has been parked, so unmasking RPS PM interrupts would happen without holding PM wakelock. This sequence of events may be observed during live_rc6_ctx_wa() selftest: 1) live_rc6_ctx_wa() -> intel_engine_pm_put() -> wakeref_put() ASYNC1) wakeref_put() callback -> __engine_park() -> intel_gt_pm_put_async() -> intel_gt_pm_put_async_untracked() -> intel_wakeref_put_async() ASYNC2) wakeref_put_async() callback -> __gt_park() -> intel_rps_park() -> intel_rps_clear_active() [clear ACTIVE] WITH INTERRUPTS: -> rps_disable_interrupts() -> cancel_work_sync(rps->work) -> rps_reset_interrupts() [rps->pm_iir = 0] WITHOUT INTERRUPTS (TIMER mode): -> rps_stop_timer() -> cancel_work_sync(rps->work) 2) live_rc6_ctx_wa() -> intel_gt_wait_for_idle() -> intel_gt_retire_requests_timeout() -> dma_fence_wait_timeout() -> ops->wait() [i915_fence_wait()] -> i915_request_wait_timeout() -> intel_rps_boost() -> intel_rps_is_active() [check ACTIVE] [OPEN RACE WINDOW] -> queue_work(rps->work) -> retire_requests() -> i915_request_retire() -> intel_rps_dec_waiters() [from 1 to 0] If ASYNC1 and ASYNC2 would execute during [OPEN RACE WINDOW], then: 3) rps_work() executes from the workqueue and may satisfy "(!pm_iir && !client_boost)" test (in TIMER mode rps->pm_iir is zeroed by an earlier rps_work() call or never gets a new value after previous intel_rps_unpark() event), so it jumps to "out" label, bypassing intel_rps_is_active() guard and executes gen6_gt_pm_unmask_irq(); 4) GT is parked and runtime PM wakelock is dropped, so only a raw reference in __gt_park() -> intel_display_power_put_async() remains for 100ms, then the MMIO write in gen6_gt_pm_unmask_irq() detects missing wakelock via assert_rpm_wakelock_held() and emits "RPM wakelock ref not held during HW access" tainting kernel. Commit 3e7abf814193 ("drm/i915: Extract GT render power state management") dropped the "if (rps->interrupts_enabled)" guard that gen6_pm_rps_work() had around this unmask in i915_irq.c. INTEL_RPS_ACTIVE brackets the same window, since it is set in intel_rps_unpark() before rps_enable_interrupts() and rps_start_timer() and cleared in intel_rps_park() before rps_stop_timer() and rps_disable_interrupts(). Skip unmasking when RPS is no longer active (reaching unmask operation is independent of INTERRUPT mode). This does not prevent RPS operation from resuming on the next unpark. In interrupt mode, intel_rps_unpark() calls rps_enable_interrupts(), which enables and unmasks the PM interrupts. In timer mode, it calls rps_start_timer(), restarting periodic engine-busyness evaluation. The timer generates software RPS events and queues rps_work() directly, independently of PM interrupt delivery. Neither mode requires the late worker to unmask interrupts while the GT is parked (cherry picked from commit ca4a6deadad15b91ee083afe445fa6bdbfb68206) | ||||
| CVE-2026-99002 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate pitch coming from userspace Validate the pitch, alongside the box dimensions before trying to copy data from the underlying surface. Fixes possible out of bounds reads with cursor snooping. | ||||
| CVE-2026-98993 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: namespace: don't inherit MNT_UMOUNT in clone_mnt() MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has taken out of its namespace. It's never cleared. __detach_mounts() unhooks a mount that carries it instead of unmounting it. disconnect_mount() lets an unmounted child stay attached only if its parent carries it. propagate_umount() takes it as the sign that a mount is going to be unmounted when it decides what else can be unmounted, where a chain of locked mounts ends and where a for reparenting an overmount. clone_mnt() copies the flags of the source and only masks MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was lazily unmounted but is kept alive by a file descriptor can still be copied when its root is an nsfs or pidfs file because may_copy_tree() accepts those before checking whether the source is mounted at all: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --bind /proc/self/fd/3 /tmp/y The mount on /tmp/y is attached to the caller's namespace with MNT_UMOUNT already set and every copy of it inherits the flag again. That causes a number of bugs: - Unlink its mountpoint from a mount namespace where it isn't one. __detach_mounts() takes it for a mount that was unmounted earlier, unhooks it from its parent and drops the reference the namespace holds on it. It stays in the namespace with one reference too few and as its own parent, so it can't be unmounted through the file descriptor anymore and the namespace never finds it again. When the namespace goes away it's leaked and points to a freed struct mnt_namespace that may_change_propagation() and anon_ns_root() read on the next propagation change or mount_setattr() through the file descriptor. - Make it shared and unmount a peer. trace_transfers() follows the flag from the peer into it and strips it from its peer group. - Let a propagated umount reach it. gather_candidates() marks it with T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the mark is never cleared and every later propagated umount skips it. If it's the parent of a locked mount handle_locked() takes it as the cutoff and commits the locked child that should have stayed and disconnect_mount() leaves that child attached to it, unmounted under a mounted parent, which is what disconnect_mount() exists to prevent. When the namespace goes away umount_tree() visits the child a second time. And once __detach_mounts() has made it its own parent reparent() never finds the end of the chain of unmounted parents. A clone is a new mount that has never been unmounted. Add MNT_UMOUNT to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when umount_tree() reaches a mount that already has it set. | ||||
| CVE-2026-98992 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: namespace: don't copy an unmounted mount tree may_copy_tree() accepts a mount whose root is an nsfs or pidfs file before it checks whether that mount is mounted. This exception exists for nsfs and pidfs mounts. They are part of no mount namespace so neither check_mnt() nor is_mounted() would let them through and bind-mounting a nsfsfd or a pidfd wouldn't work. Problem is that exception also admits a bind mount of such a file when it was lazily unmounted and is only kept alive by a file descriptor: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --rbind /proc/self/fd/3 /tmp/y With MS_REC or AT_RECURSIVE copy_tree() doesn't stop at the unmounted mount. It copies every mount that stayed attached to it as well. So if you have a bunch of overmounts over the nsfsfd or the pidfd the whole unmounted stack is copied. That's a bug. So refuse to walk an unmounted tree. Copying its root alone stays possible. So a bind mount of a namespace that is gone can still be recreated from a file descriptor on the old one. The file descriptor pins that mount and its root and __has_locked_children() only reads the direct children which don't leave the parent's list without namespace_sem. The internal mounts carry MNT_NS_INTERNAL instead of NULL and are still walked. Copying an unmounted tree recursively fails with EINVAL. | ||||
| CVE-2026-98990 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: namespace: check a submount for references right before unmounting it shrink_submounts() and mark_mounts_for_expiry() first collect all the mounts they are allowed to unmount and then unmount them. Whether a mount is busy is decided by propagate_mount_busy() on the tree. But unmounting the first mount changes the tree that the second one propagates into. propagate_umount() moves a surviving overmount off a copy it unmounts and mounts it where the copy was mounted. If that's where the propagated copy of the second victim is looked up the overmount becomes a candidate of the second umount_tree(). It's childless and so trim_one() commits it without looking at its reference count. So a synchronous umount pulls out a busy mount that is in use somewhere else and marks it MNT_SYNC_UMOUNT while it has users: umount2(/tmp/plshrink/p1, 0) = 0 errno 0 cwd is (unreachable) The same two umounts requested one after the other fail with EBUSY. This needs a mount with MNT_SHRINKABLE, i.e., automounted submounts of NFS, AFS and CIFS or the tracefs mount below debugfs. Bind mounts inherit the flag. Check each mount right before it is unmounted under the same hold of namespace_sem and mount_lock as the umount itself. Make sure that the algorithm stays linear. | ||||
| CVE-2026-98985 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: namespace: check the mounts before reading their parents in pivot_root() path_pivot_root() reads the parents of new_root and of the caller's root and checks whether they are shared before it checks that either mount is in the caller's mount namespace. Only namespace_sem is held. That's fine for a mount that is in the caller's mount namespace. But new_root can be a file descriptor to a mount that has been unmounted and that only the file descriptor keeps alive. If that mount stayed attached to its parent when it was unmounted nothing pins the parent for it. The final mntput() of the parent unhooks the children under mount_lock alone and frees the parent afterwards: pivot_root() close(fd), last ref on the parent ------------ --------------------------------- ex_parent = new_mnt->mnt_parent mntput_no_expire_slowpath() __umount_mnt(new_mnt) cleanup_mnt() call_rcu() IS_MNT_SHARED(ex_parent) BUG: KASAN: slab-use-after-free in path_pivot_root+0xf1a/0x1840 Read of size 4 at addr ffff8881047382f8 by task pivot_widen/157 path_pivot_root+0xf1a/0x1840 __x64_sys_pivot_root+0x165/0x190 The same goes for the caller's root via chroot(). Both outcomes of the check end in EINVAL so nothing but the read itself goes wrong. It's the same thing commit bb4609405752 ("statmount: read the parent of an unmounted mount under mount_lock") fixed for statmount(). Check that both mounts are in the caller's namespace before their parents are read. Every path returns EINVAL either way. | ||||
| CVE-2026-98984 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: dcache: don't put a mountpoint on a dentry that's being removed rmdir(), unlink() and rename() call dont_mount() on the victim and then detach_mounts() with the victim's inode locked. do_lock_mount() takes the inode lock of the mountpoint and checks cant_mount() so a mount can't show up after detach_mounts(). But attach_recursive_mnt() makes a second mountpoint for the root of the source mount so that the mounts already located at the destination can be put on top of it. No inode is locked for that one and d_set_mounted() only refuses a dentry that is unlinked. Between detach_mounts() and d_delete() the victim is still hashed: rmrace: b passed dont_mount() and detach_mounts(), sleeping T2: move_mount(S, /tmp/plcant/x, BENEATH) = 0 errno 0 () T1: rmdir(/tmp/plcant/d/b) = 0 errno 0 109 107 0:61 /d/b//deleted /tmp/plcant/x rw,relatime - tmpfs tmpfs rw 108 109 0:63 / /tmp/plcant/x rw,relatime - tmpfs T rw A bind mount of the directory that's being removed is moved beneath an existing mount while the rmdir() is located between the two calls. The mount ends up on the removed directory and nothing will ever detach it. Check cant_mount() in d_set_mounted() as well. dont_mount() raises the flag under d_lock before detach_mounts() runs so either the mountpoint is set first and detach_mounts() finds the mount or the flag is seen and the mount is refused. | ||||