Export limit exceeded: 429988 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 429988 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (429988 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99625 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix duplicate dependency fence releases drm_sched_job_add_dependency() consumes its fence reference on success and failure. Do not release the fence again if drm_sched_job_add_dependency() fails. (cherry picked from commit e04f3dfb2071451633e6440a3911a9bb65df9144) | ||||
| CVE-2026-99626 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL deref in dcn401_update_clocks_update_dtb_dto [Why] resource_get_otg_master_for_stream() can return NULL if no OTG master pipe is found for a given stream. The current code dereferences this pointer without a NULL check. This may lead to a possible NULL pointer dereference. [How] Add an explicit NULL check and skip the stream if the OTG master is not found. This is similar to dcn60_update_clocks_update_dtb_dto(). Found by Linux Verification Center (linuxtesting.org) with SVACE. (cherry picked from commit ffde3d74c1faeeb645b66d02d02fdae3e073941b) | ||||
| CVE-2026-99627 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx12: disallow GFXOFF while updating the SPM VMID gfx_v12_0_update_spm_vmid() does a read-modify-write of RLC_SPM_MC_CNTL over MMIO without keeping GFX powered, unlike gfx11. When GFX is in GFXOFF at that point the update doesn't stick, and with the SPM VMID programmed on submission again, the job of a process with a reserved VMID can still run with the SPM writing through VMID 0. On navi48, after a few other submissions and a VM fault on the same VM, a COPY_DATA of RLC_SPM_MC_CNTL from such a job reads 0 although the update was called for it: $ amd_uapi_regression --run-subtest cs-secure-ib-compute,gem-mapping-info-high-va,gpuvm-fault-high-va,reserved-vmid-spm-vmid amdgpu 0000:03:00.0: [gfxhub] page fault (src_id:0 ring:40 vmid:7 pasid:185) amdgpu 0000:03:00.0: Faulty UTCL2 client ID: SDMA1 (0xe) RLC_SPM_MC_CNTL in the job: 0x00000000 With GFXOFF disallowed around the update it reads the reserved VMID 15. (cherry picked from commit 907aebc5578ae09fa5c0e2f0784201295837e60b) | ||||
| CVE-2026-99629 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts for navi10_ih Port this change to navi10_ih.c: commit afbf7955ff01 ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts") Setting IH_RB_WPTR to 0 does not clear RB_OVERFLOW if RB_ENABLE is not set. Pulse WPTR_OVERFLOW_CLEAR after RB_ENABLE (and with WPTR_OVERFLOW_ENABLE) so overflow is cleared when interrupts are enabled. (cherry picked from commit 713fb4ab04f4d2af6120f8eb607c5673b2759b38) | ||||
| CVE-2026-99630 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: validate the moved individual BOs on restore An individual BO of a user queue VM, i.e. one which doesn't share the root reservation, goes to the individual needs_update list when it is evicted. The user queue restore looked at vm->invalidated for them, which the VM state machine rework turned into the always_valid evicted list and commit 18decfc9e8cc ("drm/amdgpu/userq: actually validate userq BOs") into the individual evicted one. That list only holds imported DMA-bufs of compute VMs though, so for a user queue VM nothing is validated. The restore then neither locks such a BO nor moves it back. Its PTEs are updated to wherever it is now, cleared if it went to system memory, and it doesn't get the new eviction fence, so it can move again under the running queue. On navi48, once the BOs of an SDMA user queue are evicted from GTT (debugfs amdgpu_evict_gtt) the queue faults on its ring and rptr: amdgpu 0000:03:00.0: in page starting at address 0x0000000100000000 from client 10 amdgpu 0000:03:00.0: Faulty UTCL2 client ID: SDMA0 (0xd) amdgpu 0000:03:00.0: in page starting at address 0x0000000100101000 from client 10 Validate the BOs on the individual needs_update list like before. (cherry picked from commit eb0d94765d4be18d41e93ad09947dd9cc06ed31a) | ||||
| CVE-2026-99631 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check amdgpu_vm_ready() in dma-buf move notify amdgpu_dma_buf_move_notify() touches the page tables without first calling amdgpu_vm_ready(). When a process is SIGKILLed, its VM entities are stopped. Teardown of an imported dma-buf then tries to clear PTEs by submitting to one of those stopped entities. That eventually hangs the task. Commit aa5fc4362fac ("drm/amdgpu: fix task hang from failed job submission during process kill") added the stopped entity check in amdgpu_vm_ready() and used it in amdgpu_cs_vm_handling(). That did not cover a call in amdgpu_dma_buf_move_notify(), what was already mentioned in: https://lists.freedesktop.org/archives/amd-gfx/2025-October/133076.html Tested by SIGKILLing a GPU workload holding imported dma-bufs. Without the patch "Trying to push to a killed entity" errors are logged, then a task hangs. With the patch there are no hung tasks. This was tested on a 6.18 kernel. (cherry picked from commit bee5c9d7a34cb1b510ad3b4c18c30f9d38b0ab7d) | ||||
| CVE-2026-99633 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: keep the CS user fence BO in GTT The CS ioctl hands the GPU the GART address of the user fence BO, but since the BO keeps its own preferred and allowed domains, it no longer makes sure the BO is in GTT. A user fence in a VRAM BO, which only needs to be a page in size, gets its address from amdgpu_bo_gpu_offset(), which warns about non-contiguous VRAM. On navi31, a CS with a user fence in a 4K VRAM BO, or in one created with AMDGPU_GEM_CREATE_VM_ALWAYS_VALID: WARNING: amdgpu_object.c:1531 at amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu], CPU#11: cs_gem_checks/18393 RIP: 0010:amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu] Call Trace: <TASK> amdgpu_cs_parser_bos.isra.0+0x4eb/0x850 [amdgpu] amdgpu_cs_ioctl+0x97e/0x2510 [amdgpu] drm_ioctl_kernel+0xac/0x110 [drm] drm_ioctl+0x2c6/0x5b0 [drm] __x64_sys_ioctl+0xa0/0xf0 do_syscall_64+0xa3/0x4d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e and BOs which can't be in GTT at all, like GWS or OA ones of a page in size, pass the checks as well. Only take BOs which can't be anywhere else than in GTT as user fence, which the CS then validates there along with its other BOs. While at it, detect userptrs with amdgpu_ttm_tt_is_userptr(); amdgpu_ttm_tt_get_usermm() returns NULL once the task which created the userptr is gone. v2: only take BOs which can only be in GTT instead of special casing the user fence BO in the validation, use amdgpu_ttm_tt_is_userptr() (Christian) (cherry picked from commit f16989def9561d04d0f2e77216f5319112d29bf1) | ||||
| CVE-2026-99636 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: reject a negative TCP header offset in qdisc_pkt_len_segs_init() qdisc_pkt_len_segs_init() stores skb_transport_offset(), or the inner offset, in the unsigned hdr_len. A header in front of skb->data gives a negative offset. For an offset a little below zero, pskb_may_pull() gets a small length and succeeds. Then a 64-bit kernel reads the TCP header far after the skb and can crash. Further below zero pskb_may_pull() fails. Commit 28a57fb2c5df ("net: iptunnel: fix stale transport header during tunnel decapsulation") fixed one source of such offsets. Other code that removes bytes from the front of a packet can leave the same stale header. Return SKB_DROP_REASON_SKB_BAD_GSO for a negative offset in the TCP branch. SKB_GSO_UDP_L4 and the other GSO types read no header and still get a wrong qdisc_pkt_len(). On a 64-bit kernel only packets that cause the read after the skb today get a new result. Then __dev_queue_xmit() drops them and returns -EINVAL, but sch_handle_ingress() ignores the result. Their content can be valid. Thus the code that leaves the header stale needs its own fix. | ||||
| CVE-2026-99637 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: inherit FMODE_NONOTIFY when opening directory realfiles When fanotify hands a listener an fd for a permission event on an overlay directory, ovl_dir_open_realfile() opens the real directory via dentry_open(), not backing_file_open(), so the lower open could still raise FS_OPEN_PERM and deadlock a listener that also marks the backing filesystem. Export dentry_open_nonotify() and call it from ovl_path_open_realfile() when the overlay user file must not generate events. Ordinary ovl_path_open() callers are unchanged. | ||||
| CVE-2026-99654 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: fix unmap_mapping_range() beyond 4 GiB on 32-bit Commit 9eab0421fa94 ("mm: fix unmap_mapping_range high bits shift bug") made holebegin and holelen unsigned before they are shifted, by casting them to pgoff_t. That is an unsigned long: on a 32-bit kernel the cast cuts off the upper half of the two loff_t values, so a hole which begins at 4 GiB or beyond is taken for one in the first 4 GiB of the file. truncate_pagecache() passes the new size of the file and asks for private COWed pages to be unmapped as well. If a file of 6 GiB is truncated to 5 GiB, everything from 1 GiB on is unmapped, and what a process has written to a private mapping of the range between 1 GiB and 5 GiB is lost: it reads the contents of the file again. Where the range has an end, the wrong range is unmapped instead of the right one. The page cache copes with that, as it unmaps every folio that it removes. The callers which only have unmap_mapping_range() to get rid of user mappings do not, for example drm_vma_node_unmap(), whose fake offsets reach beyond 4 GiB on 32-bit, and revoke_iomem() with physical addresses of more than 32 bits. Cast to u64 instead. Nothing changes for 64-bit kernels. Fix generated by an LLM and sent by Josef Bacik in private. | ||||
| CVE-2026-99655 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/memory: reject remote COW faults on PFN mappings When handling a COW fault without a normal source page (PFN mappings), __wp_page_copy_user() copies from the faulting user address. For remote faults, this accesses the wrong address space, resulting in wrong data getting copied. For example, user_events updates an enable bit in the registering process's memory. If that memory needs to be faulted in, user_event_enabler_fault_fixup() calls fixup_user_fault() from a work item. Placing the enable bit in a private PFN mapping can trigger this remote COW path. Reject these faults with VM_FAULT_SIGBUS when the target mm differs from current->mm: remote faults. Ordinary (non-PFN) mappings are not affected. The user-address copy dates back to commit 6aab341e0a28 ("mm: re-architect the VM_UNPAGED logic"); likely, actual ways to get remote faults in there on COW PFN mappings appeared afterwards. But the fix is simple and straight forward. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify comment and description ] | ||||
| CVE-2026-99656 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/madvise: fix data loss from MADV_FREE on a KSM page MADV_FREE can clear the dirty flag of a singly mapped KSM folio. The folio remains in the stable tree and can gain new mappings without being dirtied again. Once marked lazyfree, reclaim can discard data that those mappings still need. KSM always marks a folio dirty when converting it to a KSM folio in try_to_merge_one_page(). Marking a folio lazyfree clears PG_swapbacked but leaves PG_dirty unchanged. Preserving PG_dirty makes reclaim restore PG_swapbacked instead of discarding the folio. This also protects folios that were already lazyfree when KSM converted them. Skip KSM folios before clearing their dirty flag, checking under the folio lock to serialize with KSM conversion. | ||||
| CVE-2026-99658 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/mmu_notifier: finish non-blocking interval invalidation on error When an ordinary MMU notifier rejects a non-blocking invalidation, the interval invalidation started beforehand is left unfinished: the caller skips mmu_notifier_invalidate_range_end(). Subsequent interval notifier operations can then wait forever. The only in-tree trigger is nouveau SVM, which uses both notifier types and rejects non-blocking invalidations. Reaping via the OOM reaper or process_mrelease() can therefore leave the GPU fault worker stuck, holding a reference that prevents the dying process's address space and memory from being freed. End the interval invalidation when an ordinary notifier fails a non-blocking invalidation, like mn_itree_invalidate() already does when an interval notifier fails. Make that handling clearer in the documentation of mmu_notifier_invalidate_range_start_nonblock(). Fix generated by an LLM and sent by Josef Bacik in private. [ david: simplify description, update function doc ] | ||||
| CVE-2026-99659 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/mmu_gather: fix flushing ranges with 4 GiB or larger __tlb_adjust_range() takes the size of the range which has to be flushed as an unsigned int. Its callers, tlb_flush_{pte,pmd,pud,p4d}_range(), get and pass an unsigned long. Consequently, a range that is 4 GiB or larger gets truncated, possibly to 0. On arm64 with hugetlb, a 64k kernel can have 16 GiB hugetlb folios mapped contiguously at the PMD level and flush them when unmapping, and a 16k kernel can flush 64 GiB PUDs through tlb_unshare_pmd_ptdesc(). So at least these two scenarios are affected. Fix it by flushing the proper range instead of the truncated one by properly using "unsigned long" for range_size. Fix generated by an LLM and sent by Josef Bacik in private. [ david: use two-tab indent, simplify description ] | ||||
| CVE-2026-125695 | 1 Wordpress-extensions | 1 Lightbox With Photoswipe | 2026-11-20 | N/A |
| The Lightbox with PhotoSwipe WordPress plugin before 5.19.0 does not escape image link URLs before outputting them in the attributes of the lightbox share menu, allowing unauthenticated users to perform Stored Cross-Site Scripting attacks via comments when the PhotoSwipe 4 frontend is used. | ||||
| CVE-2026-133492 | 1 Trendnet | 2 Tew-657brm, Tew-657brm Firmware | 2026-11-20 | 5.3 Medium |
| A vulnerability has been found in TRENDnet TEW-657BRM 1.00.1. The impacted element is an unknown function of the file /usr/www/images/.svn/entries of the component mini_httpd. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor explains: "I am not able to confirm if such vulnerability exists as the product has been EOL for more than 15 years. We will send out an announcement letting customers know." This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-124767 | 1 Xone | 1 Xonemanager | 2026-11-20 | N/A |
| Authorization bypass in the creation of projects in XOneManager 3.8.3.0. The server processes POST requests to ‘/xmanagercore/api/Project/ConvertBDToProject/’ without verifying the administrative role. An authenticated user with basic privileges can create a project and execute SQL queries on the linked database from that project. | ||||
| CVE-2026-8468 | 2 Elixir-plug, Plug Project | 2 Plug Cowboy, Plug | 2026-11-20 | N/A |
| Allocation of Resources Without Limits or Throttling vulnerability in plug_project plug allows denial of service via unbounded buffer accumulation in multipart header parsing. Plug.Conn.read_part_headers/2 in lib/plug/conn.ex does not obey its :length parameter. There is no upper bound on the size of the accumulated buffer. By contrast, the sibling function read_part_body has an explicit byte_size(acc) > length guard that stops accumulation once a limit is reached. No such guard exists in read_part_headers. An unauthenticated remote attacker can exhaust server memory by sending a crafted multipart/form-data request, causing a denial of service. This issue affects plug: from 1.4.0-rc.0 before 1.15.4, from 1.16.0 before 1.16.3, from 1.17.0 before 1.17.1, from 1.18.0 before 1.18.2, and from 1.19.0 before 1.19.2. | ||||
| CVE-2026-86586 | 2026-11-20 | 4.2 Medium | ||
| Certain EZVIZ devices are affected by a replay attack vulnerability (CWE-294). An attacker may intercept communication traffic and replay specific control commands, causing the device to execute unauthorized operations. | ||||
| CVE-2026-86587 | 2026-11-20 | 5.3 Medium | ||
| Certain EZVIZ devices are affected by an improper certificate validation issue (CWE-295). An attacker may intercept communication traffic to conduct a man-in-the-middle attack. | ||||