Export limit exceeded: 427857 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (427857 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64525 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit The struct pernet_operations docstring in include/net/net_namespace.h explicitly warns against blocking RCU primitives in .exit handlers: Exit methods using blocking RCU primitives, such as synchronize_rcu(), should be implemented via exit_batch. [...] Please, avoid synchronize_rcu() at all, where it's possible. Note that a combination of pre_exit() and exit() can be used, since a synchronize_rcu() is guaranteed between the calls. xfrm_policy_fini() violates this: it calls synchronize_rcu() before freeing the policy_bydst hash tables (so no RCU reader is mid- traversal at free time), but runs from xfrm_net_ops.exit -- once per namespace -- so a cleanup_net() of N namespaces pays N full RCU grace periods serially. Use the documented pre_exit/exit split. Move the policy flush (and the workqueue drains it depends on) into a new .pre_exit handler; xfrm_policy_fini() then runs in .exit and frees the hash tables after the synchronize_rcu_expedited() that cleanup_net() guarantees between the two phases. Providing O(1) RCU grace periods per batch instead of O(N). Observed on Linux 6.18 with a workload doing unshare(CLONE_NEWNET) at ~13/sec sustained: cleanup_net() and the netns_wq rescuer kthread both stuck in xfrm_policy_fini()'s synchronize_rcu(), >300k struct net accumulated in the cleanup queue, Percpu in /proc/meminfo climbed to 130+ GB on 256-CPU hosts, and memcg OOMs followed. setup_net and __put_net counts were balanced, ruling out a refcount leak. | ||||
| CVE-2026-64526 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: tsconfig: fix missing ethnl_ops_complete() tsconfig_prepare_data() calls ethnl_ops_begin(), we need to call ethnl_ops_complete() before returning the error. | ||||
| CVE-2026-76307 | 1 Splunk | 2 Soar, Splunk | 2026-11-17 | 7.2 High |
| In Splunk SOAR versions below 8.7.0, a user that holds a role with the Users and Roles view permission could use the Representational State Transfer (REST) API to infer authentication token values for other users. If the inferred token grants administrative access, that user could gain administrative access to the Splunk SOAR instance. The vulnerability is possible because the REST API accepts caller-controlled query filters on sensitive user record fields. For more information see Using the REST API reference for Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/7.1.0/using-the-splunk-soar-rest-api/using-the-rest-api-reference-for-splunk-soar-on-premises), Query for Data (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/7.1.0/using-the-splunk-soar-rest-api/query-for-data), and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/6.4.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation. | ||||
| CVE-2026-76308 | 1 Splunk | 2 Soar, Splunk | 2026-11-17 | 6.5 Medium |
| In Splunk SOAR versions below 8.7.0, an authenticated user could change the Enterprise Security edition through the Representational State Transfer (REST) API and cause Splunk SOAR to apply the license change. The vulnerability is possible because Splunk SOAR authenticates requests to manage the Enterprise Security edition but does not authorize the caller before it applies the license change. For more information see Using the REST API reference for Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/8.7.0/using-the-splunk-soar-rest-api/using-the-rest-api-reference-for-splunk-soar-on-premises), Obtain and configure a Splunk SOAR (On-premises) license (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.7.0/configure-your-companys-settings-in-splunk-soar-on-premises/obtain-and-configure-a-splunk-soar-on-premises-license), and Integration of Splunk SOAR with Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.7/automation-with-playbooks/integration-of-splunk-soar-with-splunk-enterprise-security) in the Splunk documentation. | ||||
| CVE-2026-64527 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: validate VMBus packet size in receive callback hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one of four message-type branches without knowing how many bytes the host wrote into hv->recv_buf. The completion path then runs memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that wakes on wait_for_completion_timeout() can read up to 16 KiB of residue from a prior message as if it were the response payload. Pass bytes_recvd into hyperv_receive_sub() and reject any packet that does not cover the pipe + synthvid header. A single switch on msg->vid_hdr.type then computes the type-specific payload size: the three completion-driving types (SYNTHVID_VERSION_RESPONSE, SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through to a shared exit that requires that size before memcpy/complete, while SYNTHVID_FEATURE_CHANGE validates its own payload and returns before reading is_dirt_needed. Unknown types are dropped. SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT array. Validate the fixed prefix first so resolution_count can be read, bound it against the array, then require only the count-sized array, so the shorter responses the host actually sends are accepted. Only run the sub-handler when vmbus_recvpacket() returned success. The memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead reports the required length, which can exceed hv->recv_buf, so copying bytes_recvd would read and write past the 16 KiB buffers. Gating on the success return keeps the copy bounded. The nonzero-return path is itself a malformed-message case and is now logged rather than silently skipped; channel recovery is not attempted. Rejected packets are reported via drm_err_ratelimited() rather than silently dropped, matching the CoCo-hardened pattern in hv_kvp_onchannelcallback(). | ||||
| CVE-2026-130623 | 1 Aws | 1 Aws-privateca-issuer | 2026-11-17 | 7.1 High |
| Incorrect authorization in the credential handling for namespace-scoped issuers in AWS Private CA Connector for Kubernetes (aws-privateca-issuer) before 1.12.0 might allow an authenticated remote user with permission to create namespace-scoped issuers to obtain certificates, including subordinate CA certificates, from every AWS Private CA and certificate template reachable by the controller's own AWS identity or by any IAM role that identity can assume. This happens because a namespace-scoped issuer that supplies no credentials, or sets only a role, falls back to the controller's own identity. To remediate this issue, users should first update any namespace-scoped issuers that rely on the controller's identity to use their own credentials. Then, upgrade aws-privateca-issuer to version 1.12.0 or the AWS Private CA Connector for Kubernetes EKS add-on to version v1.12.0-eksbuild.1. | ||||
| CVE-2026-130622 | 1 Aws | 1 Aws-privateca-issuer | 2026-11-17 | 7.1 High |
| Incorrect authorization in the credential loading logic in AWS Private CA Connector for Kubernetes (aws-privateca-issuer) before 1.12.0 might allow an authenticated remote user with permission to create namespace-scoped issuers to obtain certificates, including subordinate CA certificates, signed by another namespace's AWS Private CA with that namespace's stored AWS credentials, via a namespace-scoped issuer that references a credentials Secret in that namespace. To remediate this issue, users should first copy any credentials Secret they intend a namespace-scoped issuer to use into that issuer's namespace and update the issuer's secretRef.namespace to match. Then, upgrade aws-privateca-issuer to version 1.12.0 or the AWS Private CA Connector for Kubernetes EKS add-on to version v1.12.0-eksbuild.1. | ||||
| CVE-2026-64528 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: samsung: Remove redundant port lock acquisition in rx helpers Sashiko identified a deadlock when the console flow is engaged [1]. When console flow control is enabled (UPF_CONS_FLOW), s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable(). The serial core framework invokes the .stop_tx() and .start_tx() callbacks with the port->lock spinlock already held. Furthermore, all internal driver paths that invoke stop_tx (such as the DMA TX completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the serial core). However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable() unconditionally attempt to acquire port->lock again using uart_port_lock_irqsave(). Since spinlocks are not recursive, this causes a deadlock on the same CPU when console flow control is engaged. Remove the redundant lock acquisition from both rx helper functions. | ||||
| CVE-2026-64537 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: cfm: reject invalid CCM interval at configuration time ccm_tx_work_expired() re-arms itself via queue_delayed_work() using the configured exp_interval converted by interval_to_us(). When exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range, interval_to_us() returns 0, causing the worker to fire immediately in a tight loop that allocates skbs until OOM. Fix this by validating exp_interval at configuration time: - Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range [BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the netlink policy so userspace cannot set an invalid value. - Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has not yet been configured (defaults to 0 from kzalloc). | ||||
| CVE-2026-106431 | 1 Mongodb | 1 C Driver | 2026-11-17 | 5.7 Medium |
| An off-by-one error in the BSON bulk document writer in the MongoDB C Driver can write one zero byte immediately past a heap allocation when a document ends at a specific buffer boundary. An actor who can influence the size of documents serialized by an embedding application can corrupt adjacent process memory or terminate the process. Reaching this issue requires the application to use the BSON bulk-writer API and produce a precise cumulative document size. | ||||
| CVE-2026-106430 | 1 Mongodb | 2 C++ Driver, C\+\+ Driver | 2026-11-17 | 5.9 Medium |
| The MongoDB C++ Driver discards content after an embedded NUL byte in certain field and collection names accepted by the collection API. This can cause the driver and the calling application to interpret the same name differently. An authenticated actor who can influence a name passed by an affected application can cause the application to read distinct values from an unintended field or rename an unintended collection. These operations use the application's existing database credentials. | ||||
| CVE-2026-128841 | 2026-11-17 | 7.5 High | ||
| ** UNSUPPORTED WHEN ASSIGNED ** Missing authentication for critical function vulnerability in Apache Griffin Web Service. The REST API does not have any authentication. This includes sensitive endpoints, such as job submission when a Livy/Spark backend is configured. The API must be properly secured on the network level, and this fact was arguably not documented as clearly as it could have. This issue affects Apache Griffin Web Service: all versions. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-115690 | 1 Apache | 1 Wss4j | 2026-11-17 | 7.5 High |
| Apache WSS4J remembers the UsernameToken Nonce, the Timestamp and signature of a signed message, and the ID of a SAML 2.0 "OneTimeUse" assertion, so that a captured message cannot be accepted twice. It checked whether a value had already been seen, validated the message, and only then remembered the value, as two separate steps. If several copies of the same message were processed at the same time, they could all pass the check before any of them was remembered, and all be accepted. An attacker who obtained a valid message before the recipient first processed it could send several copies at once, so that the same authenticated request was executed more than once. Where a UsernameToken is not bound to the message by a signature, the copies could carry different message bodies. The attacker needs to obtain the message while it is still in transit; a message captured after it has been accepted cannot be replayed. Affects deployments with a replay cache configured, as Apache CXF has by default. The value is now checked and remembered in a single atomic step. Custom ReplayCache implementations should override the new ReplayCache.addIfAbsent method with an operation that is atomic in their underlying store. Users are recommended to upgrade to versions 4.0.3 or 3.0.7 or 2.4.5, which fix this issue. | ||||
| CVE-2026-21159 | 1 Samsung Mobile | 1 Samsung Pass | 2026-11-17 | N/A |
| Improper authorization in Samsung Pass prior to version 5.2.12.7 allows physical attackers to access sensitive information. | ||||
| CVE-2026-21166 | 2026-11-17 | N/A | ||
| Improper authentication in Smart Switch prior to version 3.7.74.7 allows adjacent attackers to install arbitrary applications. | ||||
| CVE-2026-21167 | 2026-11-17 | N/A | ||
| Binding to an unrestricted IP address in Smart Switch prior to version 3.7.74.7 allows adjacent attackers to bypass authentication. User interaction is required for triggering this vulnerability. | ||||
| CVE-2026-21168 | 2026-11-17 | N/A | ||
| External control of system or configuration setting in Smart Switch prior to version 3.7.74.7 allows local attackers to bypass required user interaction. | ||||
| CVE-2026-110782 | 1 Simplesamlphp | 1 Saml2 | 2026-11-17 | 8.7 High |
| The SimpleSAMLphp SAML2 library is a PHP library for SAML2 related functionality. From 6.2.2 until 6.2.4 and 7.0.0-rc2, HTTPArtifact::receive() in src/Binding/HTTPArtifact.php verifies a signed outer ArtifactResponse but returns an unsigned embedded SAML Response before calling verifyMessageSignature(). The signed path verifies with the artifact issuer's metadata keys without requiring the embedded Response issuer to match that artifact issuer. In a multi-IdP federation, an attacker controlling one trusted IdP can therefore return a validly signed outer ArtifactResponse containing an unsigned Response that claims a different IdP, bypassing the binding's embedded-message authentication. End-to-end impersonation requires a service provider using HTTP-Artifact and a downstream consumer that relies on the binding to authenticate the embedded Response rather than independently requiring a signature. This issue is fixed in versions 6.2.4 and 7.0.0-rc2. | ||||
| CVE-2026-21593 | 2026-11-17 | N/A | ||
| This High severity OS Command Injection vulnerability known as CVE-2026-21593 was introduced in version 4.9.0. This OS Command Injection vulnerability, with a CVSS Score of 7.7 and a CVSS Vector of CVSS:4.0/AV:N/AC:L/AT:P/PR:L/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N allows an authenticated attacker to execute arbitrary commands. Atlassian recommends that Fisheye and Crucible Data Center and Server customers upgrade to the latest version. If you are unable to do so, upgrade your instance to the specified supported fixed version: Fisheye and Crucible 4.9: Upgrade to a release greater than or equal to 4.9.16 See the Fisheye release notes (https://confluence.atlassian.com/fisheye/fisheye-release-notes-965552419.html) and Crucible release notes (https://confluence.atlassian.com/crucible/crucible-releases-298977378.html). You can download the latest version of Fisheye and Crucible from the Crucible Download Archives (https://www.atlassian.com/software/crucible/download-archives). | ||||
| CVE-2026-21592 | 1 Atlassian | 2 Crucible Data Center, Fisheye Data Center | 2026-11-17 | N/A |
| This High severity Path Traversal (Arbitrary Read/Write) vulnerability known as CVE-2026-21592 was introduced in version 4.9.0. This Path Traversal (Arbitrary Read/Write) vulnerability, with a CVSS Score of 7.7 and a CVSS Vector of CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:N/VA:N/SC:N/SI:N/SA:N/E:P allows an unauthenticated attacker to disclose protected application configuration files, which has high impact to confidentiality, no impact to integrity, no impact to availability, and requires no user interaction. Atlassian recommends that Crucible Server customers upgrade to the latest version. If you are unable to do so, upgrade your instance to the specified supported fixed version: Crucible Server 4.9: Upgrade to a release greater than or equal to 4.9.16 See the Crucible Server release notes ([https://confluence.atlassian.com/crucible/crucible-releases-298977378.html]). You can download the latest version of Crucible from the Crucible Download Archives ([https://www.atlassian.com/software/crucible/download-archives]). The following description summarizes the vulnerability reported via our Penetration Testing program: Crucible do not account for path parameters when validating protected paths requested through the static-resource route. A crafted path segment passes validation, after which Jetty removes the path parameter during dispatch and resolves the request to a protected resource. This can expose files under WEB-INF and permit direct invocation of admin-area JSPs outside the normal interceptor and administrative password checks. An ordinary authenticated user can exploit the issue, and unauthenticated exploitation is possible when anonymous access is enabled. | ||||