Export limit exceeded: 26162 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26162 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98820 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: set RQF_USE_SCHED when the operation is known The cached requests are allocated for one operation but can be handed out for another. A passthrough command has RQF_USE_SCHED cleared, so using those flags for a subsequent read/write bio will insert it into the scheduler without ->prepare_request() and frees it without ->finish_request(). For kyber, this leaks the domain token acquired at dispatch and stalls the queue. Don't set RQF_USE_SCHED based on the first operation the batch happened to be allocated for. Instead, set it after the request is claimed by an operation. Introduce a helper function, blk_mq_rq_late_init() for this, and absorb blk_mq_rq_time_init() since the two run together. | ||||
| CVE-2026-98822 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: prevent AP VLAN tx from other interfaces Since the station lookup was factored out of ieee80211_build_hdr(), ieee80211_lookup_ra_sta() uses sta_info_get_bss() for all AP and AP VLAN frames, not only for control port frames. A unicast frame sent on one interface thus matches a station of a different VLAN of the same BSS and is transmitted to it. Only match stations of the interface the frame is sent on, except for control port frames, since those may be sent for VLAN stations directly on the BSS interface. | ||||
| CVE-2026-98832 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: save IRQ state in blkg_tryget_closest() bio_set_dev() associates the bio with a blkg through bio_associate_blkg(). If the blkg lookup misses, blkg_tryget_closest() takes q->queue_lock with spin_lock_irq() and releases it with spin_unlock_irq(), which unconditionally enables local interrupts. Callers may call bio_set_dev() with interrupts already disabled, e.g. dm-thin's pool_map() does so while holding pool->lock taken with spin_lock_irq(). The nested spin_unlock_irq() then enables interrupts while pool->lock is still held, so an I/O completion softirq can run on the same CPU, re-acquire pool->lock (thin_endio(), or overwrite_endio() -> complete_mapping_preparation()) and deadlock. lockdep reports this as inconsistent SOFTIRQ-ON-W to IN-SOFTIRQ-W usage. Commit 3a762de55b4e ("block: save irq state in blkg_lookup_create()") fixed the same problem while the lock lived in blkg_lookup_create(), but commit 9327a865e395 ("blk-cgroup: don't nest queue_lock under rcu in blkg_lookup_create()") moved the locking into blkg_tryget_closest() and reverted it to spin_lock_irq(). Save and restore the caller's IRQ state instead. | ||||
| CVE-2026-98093 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_micfil: balance mclk enable/disable hw_params() enables mclk unconditionally and hw_free() disables it unconditionally, but the PCM core does not guarantee 1:1 pairing: hw_free() can run without hw_params(), and hw_params() can be called multiple times from the SETUP state. This triggers an "already disabled" WARN() in the first case and leaks an enable reference in the second, leaving the clock ungateable. Guard both sides with the existing mclk_flag, as fsl_sai.c does with mclk_streams. | ||||
| CVE-2023-7356 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID. | ||||
| CVE-2026-99085 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler A CPU going down has to empty its own rq. Its hotplug thread waits in sched_cpu_wait_empty() until nothing else is left, and the only thing that wakes it is balance_push(), which runs from __schedule() on the dying CPU and pushes off the migratable tasks the CPU picks. sched_ext breaks this. A task sitting on a user DSQ or held by the BPF scheduler is still counted on its rq, but an inactive CPU no longer calls ops.dispatch() and can't pull the task back. The dying CPU goes idle with the task still counted, and one of two things happens: - Another CPU consumes the task. The rq empties without a __schedule() on the dying CPU, so the hotplug thread is never woken and cpu_down() hangs holding cpu_hotplug_lock. - The task is affine only to the dying CPU. Nothing can move it, and the offline stalls until the watchdog ejects the BPF scheduler. When the rq goes offline, re-enqueue every task on it that isn't already on the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the dying CPU itself picks the tasks and balance_push() pushes them off, the same as for the other sched classes. From then on no sched_ext path on another CPU can pull a task off the rq. ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU hotplug then waits for an RCU grace period before taking the rq offline. A BPF-held task affine only to the dying CPU and preempted inside an RCU read-side critical section would block that grace period, and the rq would never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps running until the rq goes offline. Only the dying CPU's own hotplug thread clears the flag during teardown, and task_can_run_on_remote_rq() still keeps other rqs' tasks off the CPU. | ||||
| CVE-2026-99087 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix NULL pointer dereference when the 'R' flag is used If the dm-integrity device has the SB_FLAG_DIRTY_BITMAP flag set and the user activates the device in the 'R' mode, a crash in dm_integrity_resume happens because the function attempts to read the journal containing the bitmap. This patch makes dm-integrity skip any writes to the device in dm_integrity_resume if the device is activated in the 'R' mode. | ||||
| CVE-2026-99069 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: ati_remote2 - fix type confusion in device attribute handlers Previously, the channel_mask and mode_mask attributes were registered on the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b ("Input: ati-remote2 - use driver core to instantiate device attributes") converted the driver to let the driver core manage them via dev_groups in struct usb_driver, the attributes moved to the bound usb_interface devices, but the show and store callbacks were not updated accordingly. As a result, the callbacks still invoked to_usb_device() on a device pointer belonging to a struct usb_interface, producing an invalid usb_device pointer. Use to_usb_interface() directly in the attribute handlers to obtain the interface and its driver data. | ||||
| CVE-2026-99076 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: udp: Create exceptions before socket matching Currently, when ICMPv6 Packet Too Big and Redirect Message packets are locally delivered and quote a UDP packet, an exception is only created in the IPv6 exception cache if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the exception cache in order to discover the ephemeral port used by a connected UDP socket. Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and commit a00df2caffed ("ipv6: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the exception cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating an exception, even before trying to find a matching socket. Do that by calling ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) from an off-path attacker will always result in an exception being created or updated in the cache that the attacker can observe. Pass the ifindex of the ingress device and the default uid, in a similar fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any nexthop in ip6_redirect_nh_match() and no exception would be created in response to a Redirect Message. Note that this does not allow attackers to create exceptions that they could not create before, as both helpers can already be reached with little to no validation. For example, by sending an ICMPv6 error that quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that matches a wildcard socket. Also note that in the good case (matched socket) the above scheme comes at the cost of an extra route lookup, as the no socket helpers perform their own lookup before the one performed by ip6_sk_update_pmtu() / ip6_sk_redirect(). When the two resolve to different nexthops, it also results in two exceptions being created for the same destination IP. One in the exception cache of the nexthop resolved by the no socket helpers and another in the exception cache of the nexthop used by the socket. | ||||
| CVE-2026-98094 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: make dirty_lock IRQ-safe fbtft_mkdirty() can be reached from the fbcon rendering path while processing printk() in hardirq context. Meanwhile, dirty_lock is also taken by fbtft_deferred_io() in workqueue context with local interrupts enabled. Lockdep reports a possible IRQ lock inversion involving dirty_lock and console_owner. A hardirq can interrupt a CPU holding dirty_lock and enter the console rendering path, which can attempt to acquire dirty_lock again. The following lockdep report was observed on an RK3566 system with CONFIG_PROVE_LOCKING enabled: WARNING: possible irq lock inversion dependency detected swapper/2/0 just changed the state of lock: (console_owner){-...}-{0:0} but this lock took another, HARDIRQ-unsafe lock in the past: (&par->dirty_lock){+.+.}-{2:2} CPU0 CPU1 ---- ---- lock(&par->dirty_lock); local_irq_disable(); lock(console_owner); lock(&par->dirty_lock); <Interrupt> lock(console_owner); *** DEADLOCK *** Use spin_lock_irqsave() for fbtft_mkdirty() and spin_lock_irq() for fbtft_deferred_io(). They only access the dirty line range, so the IRQ-off regions remain short. | ||||
| CVE-2026-99048 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix napi_disable deadlock when attempting to disable XSK pools When disabling XSK pools, GVE calls the unlocked versions of napi_disable and napi_enable. However, the netdev lock has already been acquired before ndo_bpf is called because GVE supports queue management ops. Calling the unlocked versions of napi_disable/enable results in a deadlock when attempting to disable XSK pools, as the thread attempts to re-acquire a lock it already holds. Update the NAPI calls to use the locked versions. This issue was found in production. | ||||
| CVE-2026-99055 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: reject net_iov in zerocopy receive mapping hints After copying a readable prefix, receive_fallback_to_copy() asks tcp_zerocopy_set_hint_for_skb() where page mapping can resume. If the next skb is unreadable, find_next_mappable_frag() passes its net_iov fragment to can_map_frag(). skb_frag_page() returns NULL for a net_iov, but can_map_frag() dereferences it in PageCompound(). A v7.2 KASAN run on a connected TCP socket with 64 readable bytes followed by a 4096-byte NET_IOV_DMABUF fragment reported: BUG: KASAN: null-ptr-deref in can_map_frag tcp_zerocopy_receive -> can_map_frag Kernel panic - not syncing: KASAN: panic_on_warn set The diagnostic inserted the net_iov directly because the test host has no devmem-capable NIC. Hardware end-to-end reachability remains untested and requires CONFIG_NET_DEVMEM plus a supported DMA-buf-bound RX queue. Reject all net_iov fragments before skb_frag_page(). This covers both DMABUF and IOURING net_iov types while leaving page-backed checks unchanged. With the guard, the same queue copied the readable prefix, returned a 4096-byte skip hint, and completed without a fault. | ||||
| CVE-2026-98095 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_packet: Don't cast tpacket_hdr.tp_len to int in tpacket_parse_header(). syzbot reported BUG() in sock_sendmsg_nosec(). [0] The problem is that tpacket_parse_header() casts user-provided tpacket_hdr.tp_len, which is u32, to int. If the length is larger than INT_MAX, the following condition in tpacket_parse_header() passes, if (unlikely(tp_len > size_max)) and any negative value can be returned to the caller, up to sock_sendmsg_nosec(). The repro set tpacket_hdr.tp_len to 0xfffffdef, which is cast to -EIOCBQUEUED (-529), triggering BUG() in sock_sendmsg_nosec(). *(uint64_t*)0x200000000008 = 0xfffffdef; ... syscall(__NR_write, /*fd=*/r[0], /*buf=*/0x200000000000ul, /*count=*/1ul); Let's define the local tp_len as u32 in tpacket_parse_header(). [0]: kernel BUG at net/socket.c:803! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 5628 Comm: syz-executor176 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026 RIP: 0010:sock_sendmsg_nosec+0x145/0x180 net/socket.c:803 Code: 06 67 48 0f b9 3a eb 95 e8 e8 3a 22 f8 48 89 df 4c 89 f6 4c 89 e2 4d 89 fb 2e e8 32 a5 5c 16 e9 51 ff ff ff e8 cc 3a 22 f8 90 <0f> 0b e8 c4 3a 22 f8 48 83 c3 18 48 89 d8 48 c1 e8 03 42 80 3c 28 RSP: 0018:ffffc90003aefb48 EFLAGS: 00010293 RAX: ffffffff89a578d4 RBX: ffff8880764c67c0 RCX: ffff88807fb23e80 RDX: 0000000000000000 RSI: 00000000fffffdef RDI: 00000000fffffdef RBP: 00000000fffffdef R08: ffffc90003aef747 R09: 1ffff9200075dee8 R10: dffffc0000000000 R11: fffff5200075dee9 R12: 0000000000000001 R13: dffffc0000000000 R14: ffffc90003aefbc0 R15: ffffffff8aac4310 FS: 000055559101b400(0000) GS:ffff888124ce0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000000210 CR3: 0000000073dca000 CR4: 00000000003526f0 Call Trace: <TASK> __sock_sendmsg net/socket.c:815 [inline] sock_write_iter+0x2de/0x3e0 net/socket.c:1266 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x612/0xba0 fs/read_write.c:687 ksys_write+0x150/0x270 fs/read_write.c:739 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f173130ecb9 Code: c0 79 93 eb d5 48 8d 7c 1d 00 eb 99 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 d8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd67e44248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f173130ecb9 RDX: 0000000000000001 RSI: 0000200000000000 RDI: 0000000000000003 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd67e44388 R13: 0000000000000002 R14: 00002000000000c0 R15: 0000000000000002 </TASK> | ||||
| CVE-2026-99028 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Free outstanding DMA buffers on dmaengine stop In the dmaengine path the driver pre-submits RX buffers and holds in-flight TX buffers whose SKBs are DMA-mapped by the driver and freed only in the completion callbacks. On ndo_stop() dmaengine_terminate_sync() aborts these descriptors without running their callbacks, and the driver then frees only the ring shells, leaking every SKB still owned by the engine and its DMA mapping on each ifdown. With 128 RX buffers pre-posted per channel, the mapping leak can eventually exhaust a limited IOMMU aperture. Clear the slot's skb in the TX and RX callbacks so a non-NULL skb marks a slot that still owns a live, DMA-mapped buffer, and on stop unmap and free every such buffer. axienet_dma_rx_cb() runs from the DMA tasklet and re-arms the RX ring on each completion, so it can race axienet_stop(): a completion may submit a fresh buffer after dmaengine_terminate_sync() has returned, leaving the channel armed with a buffer the teardown then frees while the engine may still write into it (dma_release_channel() does not stop it either). Add a lock that axienet_dma_rx_cb() holds across the @stopping check and the resubmit, and axienet_stop() holds to set @stopping before terminating. Once @stopping is set no callback can arm a new buffer, and any armed just before is aborted by the terminate, so teardown only frees buffers the engine no longer owns. | ||||
| CVE-2026-99029 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: sparx5: free the matchall entry on destroy sparx5_tc_matchall_replace() allocates a struct sparx5_mall_entry for every offloaded matchall filter and adds it to sparx5->mall_entries. sparx5_tc_matchall_destroy() removes the entry from the list, but never frees it, so the entry of every deleted mirror and goto matchall filter is leaked. Free the entry after unlinking it. The leak was discovered by an AI code review agent, and reproduced with kmemleak on a lan969x EV board (EV23X71A) by repeatedly adding and deleting matchall mirror and goto filters. With the fix, kmemleak no longer reports the leak. | ||||
| CVE-2026-98758 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: glink: fix use-after-free of ucsi on remove The pmic_glink client is released by the devres cleanup, which runs after pmic_glink_ucsi_remove() has returned, so its notification callbacks can queue work until then. Work that runs after ucsi_unregister() has been called touches freed state: it dereferences the connector array that ucsi_unregister() freed, or registers and unregisters the instance a second time. Disable both work items with disable_work_sync() before unregistering, and unregister only if the instance is still registered. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98729 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Don't apply va_align to hugetlb mappings on AMD F15h get_align_mask() returns huge_page_mask_align() for hugetlbfs, but get_align_bits() adds va_align.bits regardless, so vm_unmapped_area() returns an address off the huge page boundary and __unmap_hugepage_range() hits BUG_ON(start & ~huge_page_mask(h)) at teardown. This can be triggered on Carrizo and FX-8370E, both hstates. Pass the file to get_align_bits() and skip the randomisation for hugetlbfs. [ bp: Massage commit message. ] | ||||
| CVE-2026-98740 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Drop __init from ECC setup paths for re-probe safety Sashiko reports: "Does suppressing sysfs unbinding fully prevent the execution of freed __init memory? If altr_sysmgr_regmap_lookup_by_phandle() returns -EPROBE_DEFER, the probe is deferred until after __init memory is freed." The a10 EDAC .setup callbacks (sdmmc, ethernet, nand, dma, usb, qspi) and their helpers (altr_init_a10_ecc_device_type, altr_init_a10_ecc_block) were marked __init. These run from the probe path, which may execute after init memory is freed -- e.g. a probe deferred via -EPROBE_DEFER that only succeeds once a late/module dependency appears, or a manual unbind/rebind. Calling __init code then dereferences freed memory. Remove __init so these functions remain valid at runtime. | ||||
| CVE-2026-99001 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/i2c: cancel the client work on remove xe_i2c_notifier() stores the DesignWare adapter in i2c->adapter and schedules i2c->work when the adapter is registered under the xe I2C platform device, and xe_i2c_client_work() then instantiates the AMC client device on that adapter. xe_i2c_remove() tears down the AMC, unregisters the client devices, the bus notifier and the adapter platform device, but it never drains i2c->work. A work item that is still queued or running when the adapter is unregistered dereferences i2c->adapter in i2c_new_client_device() after platform_device_unregister() has released the adapter. The work item is also embedded in the devm-allocated struct xe_i2c, so a work item still queued after the drm device devm unwind frees that allocation runs its callback on freed memory. The bus notifier is the only thing that schedules this work, and it is unregistered after the client devices. An instance that is still queued when the teardown runs can therefore write i2c->client[XE_I2C_CLIENT_AMC] while the loop is unregistering and clearing the same array, and an AMC client it instantiates late is only cleaned up by the adapter's own child sweep in i2c_del_adapter(). Move bus_unregister_notifier() in front of the client teardown loop and cancel the work right after it, so no new instance can be scheduled and a queued instance is drained before the client array is touched. A running instance still finds a live adapter, since the adapter is unregistered later. (cherry picked from commit a23f27d5ec11c3f418c5e5531eea34ccda2b5b20) | ||||
| CVE-2026-98727 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: set BLK_FEAT_ZONED only after the zone info is known The namespace head is marked zoned at allocation time based only on the command set identifier. If the zone info query reports a zero zone size, the path namespace is registered without zoned limits while the head still advertises the zoned capability with a zone size of zero, and reporting zones or writing to the head then shifts by ilog2(0). Drop the zoned feature from the head allocation and let the head limits refresh stack it in from the path namespace instead. | ||||