Export limit exceeded: 417557 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26162 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26162 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98612 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: catc: bound the RX packet length in catc_rx_done() catc_rx_done() walks a multi-packet URB, reading a two-byte length from each packet header. Its bound, pkt_len > urb->actual_length, ignores the header offset and compares against the whole transfer rather than the bytes left from pkt_start, so a crafted packet header makes skb_copy_to_linear_data() read past the buffer. A length below ETH_HLEN is also accepted, including zero, and eth_type_trans() then reads a MAC header from the uninitialised tailroom of a shorter skb. The is_f5u011 branch takes its length straight from the transfer, so a zero-length URB reaches the same path. Track the bytes remaining from the current packet, and reject a header that does not fit, a length past what is left, and a length below an Ethernet header. A transfer shorter than an Ethernet header, including a zero-length one, previously became a runt skb passed to netif_rx() and counted as received; it is now counted in rx_length_errors and ends the walk. | ||||
| CVE-2026-98489 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: atl1c: fix soft lockup on out-of-range tpd_cons read The hardware can report an out-of-range tpd_cons (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. To avoid a soft lockup treat it as "nothing new to clean" instead. Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0, 4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that the ports are directly linked to: - Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap precursor, before the lockup was captured with a full trace elsewhere: atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up<65535 Mbps Full Duplex> 65535 (0xffff) here is the same value tpd_cons reads back once the loop below gets stuck. - Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time caught by the soft lockup watchdog with a full stack trace: watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329] CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy) RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c] Call Trace: <TASK> __napi_poll+0x32/0x1e0 napi_threaded_poll_loop+0x286/0x2e0 napi_threaded_poll+0xfd/0x140 kthread+0xf7/0x130 ret_from_fork+0x2da/0x3a0 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||
| CVE-2026-98473 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix KVM GISC and page leak when queue removed from host config Three related problems exist in the handling of KVM interrupt and page resources when a queue is removed from the host's AP configuration while assigned to a mediated device (mdev). Problem 1: ~~~~~~~~~ AP_RESPONSE_Q_NOT_AVAIL not handled in vfio_ap_mdev_reset_queue() When the AP bus removes a queue device whose adapter or domain has been removed from the host's AP configuration, vfio_ap_mdev_remove_queue() is called. If the queue is still in the host's AP configuration at that point, it calls vfio_ap_mdev_reset_queue(), which issues a PQAP(ZAPQ). Since the adapter is already gone from the host configuration, ap_zapq() returns AP_RESPONSE_Q_NOT_AVAIL (0x01). This response code is not handled in vfio_ap_mdev_reset_queue()'s switch statement and falls through to the default case, which issues a WARN but does not call vfio_ap_free_aqic_resources(). As a result, if IRQ handling was enabled for the queue by the guest, the KVM GISC registration and the pinned guest page holding the notification indicator byte (NIB) are both leaked. This is fixed by adding AP_RESPONSE_Q_NOT_AVAIL to the same case as AP_RESPONSE_DECONFIGURED and AP_RESPONSE_CHECKSTOPPED in vfio_ap_mdev_reset_queue(). Like those response codes, Q_NOT_AVAIL indicates the queue is not operational and no further reset attempts are possible; the correct action is to free the IRQ resources immediately. Problem 2: ~~~~~~~~~ AP_RESPONSE_Q_NOT_AVAIL not handled in apq_status_check() In vfio_ap_mdev_reset_queue(), there are four cases that indicate a queue reset has not yet completed, in which case apq_reset_check() is queued to a work queue to verify completion of the reset operation. This function uses the PQAP(TAPQ) function to get the queue's status and calls apq_status_check() to verify whether the reset has completed, failed or needs to be executed again. As described in Problem #1 above, apq_reset_check() does not specifically check for AP_RESPONSE_Q_NOT_AVAIL, thereby potentially leaking KVM GISC registration and the pinned guest page holding the NIB. This is fixed by adding a case statement for AP_RESPONSE_Q_NOT_AVAIL to apq_status_check() and returning -ENODEV for that case. The caller, apq_reset_check() will then check for this return code and call vfio_ap_free_aqic_resources() to prevent the leak. Problem 3: ~~~~~~~~~ vfio_ap_free_aqic_resources() leaks saved_isc when kvm is NULL vfio_ap_free_aqic_resources() guards the call to kvm_s390_gisc_unregister() with: if (q->saved_isc != VFIO_AP_ISC_INVALID && !WARN_ON(!(q->matrix_mdev && q->matrix_mdev->kvm))) If matrix_mdev->kvm is NULL -- which can happen when vfio_ap_mdev_unset_kvm() has already run and cleared kvm before a subsequent cleanup path reaches this function -- the WARN_ON fires and the entire block is skipped. This leaves q->saved_isc set to a non-invalid value, creating a potential double-free on any subsequent call to this function. When kvm is NULL the KVM guest is already torn down, so kvm_s390_gisc_unregister() need not and cannot be called; however, q->saved_isc must always be cleared. Fix this by separating the kvm_s390_gisc_unregister() call from the q->saved_isc reset. The WARN_ON now guards only the genuinely impossible case of matrix_mdev being NULL. A NULL kvm is handled gracefully by skipping only the unregister call, and q->saved_isc = VFIO_AP_ISC_INVALID is set unconditionally whenever saved_isc was not already invalid. Additionally, add an else clause to the host-config check in vfio_ap_mdev_remove_queue() to call vfio_ap_free_aqic_resources() directly when the queue is not in the host's AP configuration. This serves as a backstop: when the AP bus fires the driver .remove callback after an adapter is removed from the host config, the queue is by definition no longer addressable, so vfio_ap_mdev_reset_queue ---truncated--- | ||||
| CVE-2026-98478 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Keep internal commands dispatchable during error handling Commit 08b12cda6c44 ("scsi: ufs: core: Switch to scsi_get_internal_cmd()") switched UFS internal commands to allocate requests on hba->host->pseudo_sdev->request_queue, which shares the host tagset with regular LUNs. During error recovery, ufshcd_err_handling_prepare() calls blk_mq_quiesce_tagset(&hba->host->tag_set), marking all queues in the tagset as quiesced, including pseudo_sdev->request_queue. When ufshcd_verify_dev_init() subsequently issues internal commands (e.g. NOP OUT UPIU) via blk_execute_rq(), blk_mq_run_hw_queue() skips running the quiesced queue, resulting in an unrecoverable circular wait deadlock. Keep quiescing the tagset and unquiesce the pseudo SCSI device on top of that, so internal commands stay dispatchable while the logical units remain quiesced. Re-quiesce the pseudo device before unquiescing the tagset so that quiesce_depth stays balanced. Clock scaling and ufshcd_pause_command_processing() are unaffected: they keep quiescing the whole tagset, internal commands included. | ||||
| CVE-2026-98482 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: drop truncated I/RR/RNR PDUs in nfc_llcp_recv_hdlc() nfc_llcp_recv_hdlc() reads the sequence byte skb->data[2], via nfc_llcp_ns()/nfc_llcp_nr(), before any length check. The receive path only guarantees the two-byte LLCP header -- __nfc_llcp_recv() checks it with pskb_may_pull() and nfc_llcp_recv_agf() admits two-byte inner PDUs -- so a two-byte I, RR or RNR PDU reads one byte of uninitialised skb tailroom. The byte becomes N(R)/N(S); a peer can already set those with a well-formed PDU, so this is acting on uninitialised memory, not new peer control. Guard the read with pskb_may_pull(), as commit 95674f506c63 ("nfc: llcp: reject PDUs shorter than the LLCP header") did for the two-byte header, so the sequence byte is present and linear before it is read. RR and RNR PDUs are LLCP_HEADER_SIZE + LLCP_SEQUENCE_SIZE bytes and an I PDU is longer, so no valid frame is rejected; a truncated PDU is malformed, so return without a DM reply. | ||||
| CVE-2026-98483 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: fix use-after-free in nfc_get_local_general_bytes Commit 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by nfc_llcp_find_local") attempted to fix a use-after-free (UAF) issue by invoking nfc_llcp_local_put(local) after accessing local->gb. However, if the reference count drops to zero, local is freed immediately, leading to a use-after-free when callers access the returned pointer. Alternative approaches using dynamic allocation (e.g. kmemdup) introduced memory leaks because callers consistently treat the returned pointer as borrowed memory. Fix this properly by refactoring nfc_llcp_general_bytes() and nfc_get_local_general_bytes() to accept a caller-provided output buffer (out_gb) and its maximum length (gb_max_len). The general bytes are safely copied into out_gb before calling nfc_llcp_local_put(local), ensuring safe lifetime management without ownership transfer complications. Update all callers across drivers (microread, pn533, pn544, st21nfca, digital_dep, and nci) to provide their own destination buffers and pass them to nfc_get_local_general_bytes(). | ||||
| CVE-2026-98488 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: atl1e: fix soft lockup on out-of-range hw_next_to_clean read Same issue as atl1c (see the first commit in this series, "net: atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware can report an out-of-range hw_next_to_clean (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. Treat it as "nothing new to clean" instead. | ||||
| CVE-2026-98470 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Don't WARN on an unknown VM ioctl in protected mode kvm_pkvm_ioctl_allowed() WARNs when kvm_get_cap_for_kvm_ioctl() doesn't find the ioctl number in vm_ioctl_caps[], and kvm_arch_vm_ioctl() calls it for every number the generic code doesn't handle, so ioctl(vm_fd, 0xdeadbeef) from userspace taints a pKVM host and panics it under panic_on_warn. The lookup is fed userspace input: return false, and userspace gets the -EINVAL kvm_arch_vm_ioctl() returns for that number on a host without pKVM. | ||||
| CVE-2026-98492 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: fix dma_alloc_coherent() leak on macb_alloc() error paths Fix 3 leaks in macb_alloc() error paths: - Tx buffer allocated but crossing a 4G boundary: Tx leaked. - Rx buffer allocation fails: Tx leaked. - Rx buffer allocated but crossing a 4G boundary: Tx & Rx leaked. This is because our error handling calls macb_free(bp) which in turn frees the buffers stored in bp->queues[0], but nothing has been stored in there. Fix by storing allocated buffers into bp->queues[0] ASAP. | ||||
| CVE-2026-98500 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-oxp: use cancel_delayed_work_sync() in remove oxp_hid_remove() uses cancel_delayed_work() for all three delayed work items. cancel_delayed_work() only dequeues a pending work item without waiting for a currently executing callback to finish. If any of the work callbacks (oxp_rgb_queue_fn, oxp_btn_queue_fn, oxp_mcu_init_fn) is running at the time of removal, the callback continues executing concurrently with hid_hw_close() and hid_hw_stop(), accessing the HID device after it has been closed and stopped. Use cancel_delayed_work_sync() instead to ensure that any in-progress work callback completes before device teardown proceeds. | ||||
| CVE-2026-98601 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate device-supplied DMA indices In btintel_pcie_msix_rx_handle(), the driver processes RX completion descriptors (urbd1) written by the PCIe device into DMA-coherent memory. urbd1->frbd_tag (a 16-bit field fully controlled by the device firmware via DMA) is used directly as an array index into rxq->bufs[] without any bounds check. rxq->bufs[] has only BTINTEL_PCIE_RX_DESCS_COUNT (64) entries, while frbd_tag can be any value 0-65535. A malicious or malfunctioning device can write an out-of-range frbd_tag, causing the driver to dereference an out-of-bounds data_buf pointer. Additionally, cr_hia is read from a DMA-shared index array also writable by the device; if the device sets cr_hia >= rxq->count, the while-loop never terminates because cr_tia is wrapped via modulo rxq->count and can never equal an out-of-range cr_hia. Add bounds validation for cr_hia and frbd_tag in the RX path, and cr_hia in the TX path. Log invalid values with bt_dev_err before returning. | ||||
| CVE-2026-98605 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: samsung-dsim: fix TE GPIO lifetime for host attach When the Exynos DSI driver was generalized into samsung-dsim, the TE GPIO acquisition was switched from gpiod_get_optional() to devm_gpiod_get_optional() while keeping the matching gpiod_put() calls. That combination is wrong for a managed descriptor. However, dropping the puts and keeping the managed get is also wrong: samsung_dsim_register_te_irq() runs from the DSI host attach callback, and host detach/reattach can happen without destroying the device that owns the managed action. A second attach would then request the GPIO again without having released it. Switch back to a non-managed gpiod_get_optional() and keep the explicit gpiod_put() on the request_irq() error path and in samsung_dsim_unregister_te_irq(). [Luca: remove unnecessary comment] | ||||
| CVE-2026-98472 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV Unconditionally free SEV's "have run CPUs" cpumask in the VM destroy path, i.e. even for what appear to be non-SEV VMs, as an SEV VM becomes a non-SEV VM if its state is intra-host migrated. Alternatively, the mask could be freed in sev_migrate_from() when "converting" the source VM, but that gets annoying because ideally KVM would nullify the mask to guard against UAF, and nullifying the mask would need be conditioned on CPUMASK_OFFSTACK=y. Freeing the mask during sev_migrate_from() is also not robust against other KVM bugs, though that's kind of a moot point since any such bugs would show up even if sev->active is never set. I.e. KVM must get that side of things correct. But, that's not a great reason to add more code just to make things marginally less robust. | ||||
| CVE-2026-98474 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix missing device lock in zpci_report_status() When pdev is non-NULL, zpci_report_status() accesses the device's driver. To get a consistent state matching the recovery, the device lock needs to be held. Do so by expanding the existing device lock critical section. The lock only needs to be held when the pdev is non-NULL, so extract the pdev-specific reporting into a helper function which also adds a lockdep assertion to detect calls without the device lock held. | ||||
| CVE-2026-98607 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leaks in virtio_gpu_resource_create_blob_ioctl() virtio_gpu_resource_create_blob_ioctl() calls drm_gem_object_release() on both the virtio_gpu_resource_assign_uuid() and drm_gem_handle_create() error paths instead of dropping the reference it owns, so obj->funcs->free() never runs and the virtio_gpu_object, the resource id and the host-side resource are leaked. Use drm_gem_object_put() instead. | ||||
| CVE-2026-98615 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Set AW_FLUSH_MODE alongside AW_FLUSH when flushing the mailbox When tearing down the FW mailbox Rx ring, fbnic_mbx_reset_desc_ring() writes AW_CFG with FLUSH set and everything else, BME included, cleared. Clearing BME halts the device's writes to the host but leaves the staged requests parked in the PUL write pipeline rather than draining them, so on the write path FLUSH alone never terminates the outstanding requests and the flush the firmware waits on never completes. Add the FLUSH_MODE definition and set both bits so the staged writes drain out of the pipeline on their own. BME stays cleared, so nothing lands on the host; it is restored later in fbnic_mbx_init_desc_ring() when the ring is rebuilt, once the outstanding writes are gone. The read path is unaffected. AR_CFG has no equivalent mode bit and AR_FLUSH terminates the outstanding reads by itself, so it is left as is. Both writes remain plain stores rather than read-modify-writes. That is deliberate: the matching write in fbnic_mbx_init_desc_ring() restores BME and the TLP attributes, and clears both flush bits as a side effect. | ||||
| CVE-2026-98623 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/clk: fix list cursor use after loop in nvkm_clk_ustate_update If list_for_each_entry() exits without hitting a break then "pstate" is not a valid pstate pointer. Introduce a "found" variable instead. The check is reachable from userspace: nvkm_clk_ustate_update() takes the pstate id straight from the 'pstate' debugfs file, so requesting an id that is not in clk->states - or any id at all when the perf tables are broken and the list is empty - makes the pstate->pstate != req test dereference the list head cast to a struct nvkm_pstate, which is an out-of-bounds read. [Francesco: rebased on drm-misc-next, expanded the commit message] | ||||
| CVE-2026-98629 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: fix manual hash table handle IDR aliasing A u32 hash table created with an explicit handle ('tc filter add ... handle 801: u32 divisor N') keys its IDR entry on the raw handle, while the destroy paths free it under handle2id(handle). The two key domains disagree for handles in the 0x800..0xFFF htid range: handle2id() folds them back into the auto-allocated id space (1..0x7FF). A manual table therefore leaves its raw-keyed IDR entry unreachable on delete (a permanent leak), and its delete can drop the idr entry of an unrelated live auto table. A later auto allocation can then hand out a handle that aliases the live manual table; u32_lookup_ht() first-match routes lookups and TCA_U32_LINK for that htid to the wrong table. Key the divisor-path alloc on handle2id(handle) so allocation and removal share one key domain. A manual handle that maps onto an id already in use is rejected with -ENOSPC, and auto allocation skips ids held by live manual tables. Conditions to recreate: ip link add test0 type dummy tc qdisc add dev test0 clsact tc filter add dev test0 ingress protocol ip pref 1 \ handle 801: u32 divisor 16 tc filter add dev test0 ingress protocol ip pref 2 u32 divisor 16 tc -d filter show dev test0 ingress | grep 'fh 801:' # unpatched: two live tables with handle 0x80100000 (the pref 2 root # hnode is auto-allocated id 1); patched: the auto hnode takes id 2. Also tested with a poc with a live u32 table on the block, add/delete a manual table 'handle 901: u32 divisor 1' twice; unpatched, the re-add fails with -ENOSPC because the raw key leaked on the first delete. | ||||
| CVE-2026-98540 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fprobe: Terminate the fgraph_data list when the reservation is not filled fprobe_fgraph_entry() reserves shadow stack space for every fprobe with an exit handler, but only fills it for those whose entry handler returns 0. fgraph_reserve_data() does not clear the area, so fprobe_return() parses the unused tail as headers left over from an earlier call, and an exit handler can run twice or despite its entry handler asking to skip it. Write a zero word after the last entry to terminate the walk. A zeroed slot does not decode to a NULL fprobe on the arches that encode the header into one unsigned long, since arch_decode_fprobe_header_fp() ORs in FPROBE_HEADER_MSB_PATTERN, so make read_fprobe_header() return NULL for a zeroed slot. | ||||
| CVE-2026-98631 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: Use a 32-bit compare in xsk_map_gen_lookup xsk_map_gen_lookup() loads a u32 key and compares it with max_entries using BPF_JMP_IMM. BPF immediates are sign-extended to 64 bits, so a max_entries value of 0x80000000 or higher becomes a threshold larger than every zero-extended 32-bit key. An out-of-range index then skips the bounds check and the generated lookup reads past xsk_map[]. Compare with BPF_JMP32_IMM so the check stays in 32-bit unsigned range. | ||||