Export limit exceeded: 418266 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 418266 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (418266 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-61618 | 1 Axiom-crypto | 1 Snark-verifier | 2026-10-30 | N/A |
| SNARK Verifier is a generic (S)NARK verifier. Prior to 0.2.5, KZG accumulator public-instance limbs are decoded without consistently enforcing canonical limb bounds before elliptic-curve coordinate reconstruction. `PlonkProof::read` selects scalars using `accumulator_indices` and passes them to `AccumulatorEncoding::from_repr`. For the EVM loader, `LimbsEncoding::from_repr` forwards them to `EvmLoader::ec_point_from_limbs` in `snark-verifier/src/loader/evm/loader.rs`, where `shl` and `add` reconstruct coordinates before `validate_ec_point` checks the resulting affine point rather than the original limb bounds. The related native path in `snark-verifier/src/pcs/kzg/accumulator.rs` can reach assertion- or unwrap-based decoding and panic instead of returning a verification error. This allows noncanonical encodings at the verifier boundary and can crash the native verifier. Standard SDK aggregation circuits are expected to constrain accumulator limbs before this boundary, which limits practical exploitability. This issue is fixed in version 0.2.5. | ||||
| CVE-2026-58412 | 1 Filecoin-project | 1 Filecoin-pin | 2026-10-30 | 8.2 High |
| Filecoin Pin is an IPFS Pinning Service API implementation that pins to Filecoin's PDP service. Prior to 1.1.0, the upload GitHub Action's fork detection in `upload-action/src/build.js` checks only `event.pull_request`. In the documented two-workflow pattern, an untrusted fork pull-request workflow produces an artifact and a privileged `workflow_run` workflow downloads and uploads it. Because `workflow_run` has no `event.pull_request`, `isForkPR` becomes false and `uploadStatus` becomes `pending-upload`. The action later resolves `workflow_run.pull_requests` without repeating the fork check before initializing the wallet with `walletPrivateKey` and uploading the artifact. An external contributor can therefore cause attacker-controlled artifacts to be stored using the repository owner's Filecoin wallet, incurring unauthorized storage expenditure, dataset pollution and consumption of configured wallet funds. Disclosure of the wallet private key is not required. The 0.x action line is not receiving a backport and must be migrated to a fixed 1.x release. This issue is fixed in version 1.1.0. | ||||
| CVE-2026-62300 | 1 Filecoin-project | 1 Filecoin-pin | 2026-10-30 | 6.5 Medium |
| Filecoin Pin is an IPFS Pinning Service API implementation that pins to Filecoin's PDP service. In daemon deployments up to and including version 1.1.0, `POST /pins` in `src/filecoin-pinning-server.ts` checks a caller-supplied CID with `CID.parse` and passes it to `pinStore.pin`, but does not enforce request rate limits or per-user quotas. In `src/filecoin-pin-store.ts`, each pin independently schedules `_processPinInBackground` with `setTimeout` without a queue, semaphore or concurrency cap, then recursively traverses the full DAG using `helia.pins.add(cid)`. The per-pin Helia/Bitswap node in `src/create-pinning-helia.ts` has no application-level byte, block or traversal-time limits. Blocks are written under `carStoragePath` by `src/core/car/car-blockstore-base.ts` and `src/core/car/car-file-backend.ts`, with `stats.totalSize` updated only after writing. An authenticated caller, or an anonymous caller when `ALLOW_NO_AUTH=true`, can submit large DAGs and exhaust disk, network, CPU, memory and libp2p resources, causing service degradation or host/process failure and leaving partial CAR files requiring recovery. The default localhost binding and token requirement reduce exposure. Because nodes have no bootstrap or mDNS configuration, a CID alone may not be fetchable, but caller-supplied `origins` can point to a reachable attacker-controlled libp2p source; concurrent requests accelerate resource pressure. Version 1.1.1 documents operational mitigations but does not implement the missing resource controls. | ||||
| CVE-2026-62848 | 1 Metalama | 1 Metalama | 2026-10-30 | 7.3 High |
| Metalama is a Roslyn-based open-source patterns and architecture toolkit for C#. From 2023.0.101-rc until 2025.1.18, 2026.0.25 and 2026.1.19, the Windows Visual Studio integration deserializes local named-pipe messages without restricting which CLR types can be instantiated. The pipe connects `devenv`, the out-of-process Roslyn code-analysis process and the `CodeLens` process, and has the predictable name `Metalama_{role}_{processId}_{hash(PackageVersion)}`. Releases from the first public 2023.0 line through 2026.0.x use Newtonsoft.Json with `TypeNameHandling.All`; the later `SerializationBinder` only remaps assembly names, and `BindToType` resolves arbitrary wire-supplied types without an allow-list. Releases 2026.1.0 through 2026.1.18 use typeless MessagePack with `TypelessObjectResolver` and likewise instantiate arbitrary types. A same-user local process able to write to the pipe can send crafted messages that lead to arbitrary code execution with confidentiality, integrity and availability impacts inside the affected Visual Studio process. Default Windows pipe ACLs limit writers to the same logged-in user, so this does not escalate privileges or cross a security boundary; command-line and MSBuild-only builds do not use the channel. The maintained Metalama + PostSharp extension is affected from 2024.1 through 2026.1.4, while earlier Metalama-free PostSharp versions are unaffected. The retired Metalama and Caravela extensions remain affected and require removal or migration. The framework issue is fixed in versions 2025.1.18, 2026.0.25 and 2026.1.19; the maintained Metalama + PostSharp Visual Studio extension is fixed in version 2026.1.5. The retired Metalama and Caravela extensions require removal or migration. | ||||
| CVE-2026-62853 | 1 Mqttsnet | 1 Thinglinks | 2026-10-30 | 9.9 Critical |
| ThingLinks is an enterprise IoT platform. Prior to 1.4.0, the `/groovyScriptTest/registerScript` endpoint accepts user-supplied Groovy script content and passes it to an unsandboxed `Groovy compilation and loading` flow. An authenticated attacker can provide code that is compiled and instantiated on the server, resulting in arbitrary server-side code execution. The issue affects the `rule engine`'s Groovy script test/register flow. This issue is fixed in version 1.4.0. | ||||
| CVE-2026-62849 | 1 Mqttsnet | 1 Thinglinks | 2026-10-30 | 9.1 Critical |
| ThingLinks is an enterprise IoT platform. Prior to 1.4.0, an unauthenticated SQL injection vulnerability in the `TDengine TDS APIs` allows request-controlled JSON field values submitted to `/anyUser/tds/insertTableData` to reach unsafe SQL construction in the `TDS mapper`. A remote unauthenticated attacker can tamper with TDengine time-series data, including inserting unintended rows or overwriting existing readings. The affected surface is the TDS module's insert-table-data flow and TDengine mapper SQL generation. This issue is fixed in version 1.4.0. | ||||
| CVE-2026-62863 | 1 Gojue | 1 Moling | 2026-10-30 | 9.6 Critical |
| MoLing is a computer-use and browser-use based MCP server. Prior to 0.5.0, when MoLing runs in SSE mode using `-l`, its `/sse` and `/message` HTTP endpoints do not authenticate requests and the `mcp-go` dependency sets `Access-Control-Allow-Origin: *`. A malicious web page can open a cross-origin `EventSource` to `/sse`, including a loopback listener, and read the `endpoint` event to obtain `sessionId`. After a victim running SSE mode visits that page, the attacker can use the disclosed `sessionId` against `/message` to send unauthorized MCP tool calls. Depending on the configured tools, those calls can read or write local files, execute commands or perform other actions. Binding only to loopback does not prevent this browser-mediated attack. This issue is fixed in version 0.5.0. | ||||
| CVE-2026-62860 | 1 Zoeille | 1 Picsou-finance | 2026-10-30 | 5.3 Medium |
| Picsou is a self-hosted personal finance dashboard. In the affected login implementation, the `/api/auth/login` endpoint reveals whether a username exists through a timing discrepancy. In `backend/src/main/java/com/picsou/controller/AuthController.java`, `AuthController.login()` throws `BadCredentialsException` immediately for an unknown username, before `passwordEncoder.matches(...)`, whereas an existing username with an incorrect password incurs the `bcrypt` comparison cost. Both cases return the same generic `HTTP 401` response, but repeated latency measurements disclose valid usernames without credentials. Login rate limiting, a small user population, and deployments inaccessible from outside the local network limit practical exposure; the weakness does not itself read or modify account data, though enumerated usernames can assist credential stuffing or brute-force attacks. This issue is fixed in repository release 1.0.8. | ||||
| CVE-2026-62968 | 1 Arsmotorin | 1 Dreamdisplays | 2026-10-30 | N/A |
| Dream Displays provides in-game screens for streaming videos in Minecraft. From 1.5.0 until 1.8.2, user-controlled input can influence arguments passed to `yt-dlp` under specific conditions. Unintended command-line options may be interpreted by `yt-dlp`, potentially altering its behavior. This issue is fixed in version 1.8.2. | ||||
| CVE-2026-63400 | 2026-10-30 | N/A | ||
| Coop is an open source review and moderation tool from ROOST. Prior to 1.0.2, `resetPasswordForToken` updates the password row without invalidating database-backed sessions. An attacker who has acquired a password and established a session retains access even after the legitimate user resets the password, leaving the compromised account under attacker control until the session expires at its `30-day` maximum age. This issue is fixed in version 1.0.2. | ||||
| CVE-2026-86935 | 1 Apple | 1 Macos | 2026-10-30 | 5.5 Medium |
| This issue was addressed by removing additional entitlements. This issue is fixed in macOS Golden Gate 27. An app may be able to access user-sensitive data. | ||||
| CVE-2026-86944 | 1 Apple | 2 Ios And Ipados, Macos | 2026-10-30 | 5.5 Medium |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 26.7 and iPadOS 26.7, macOS Sequoia 15.8, macOS Tahoe 26.7. An app may be able to cause unexpected system termination. | ||||
| CVE-2026-86959 | 1 Apple | 2 Ios And Ipados, Macos | 2026-10-30 | 4.3 Medium |
| An input validation issue was addressed with improved input validation. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. Processing a maliciously crafted image may lead to unexpected process termination. | ||||
| CVE-2026-79867 | 1 Hpe | 1 Aos | 2026-10-30 | 9.6 Critical |
| Authentication bypass vulnerabilities in the affected interface of AOS-8 could allow an unauthenticated adjacent attacker to circumvent existing authentication controls and run arbitrary commands on the underlying host. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise. | ||||
| CVE-2026-79877 | 1 Hpe | 1 Aos | 2026-10-30 | 8.8 High |
| A remote code execution vulnerability in the underlying operating system of AOS-10 could allow an unauthenticated adjacent attacker to execute arbitrary code on an affected device. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system leading to complete system compromise. | ||||
| CVE-2026-79880 | 1 Hpe | 1 Aos | 2026-10-30 | 8.7 High |
| A vulnerability in the command line interface of AOS-8 could allow an authenticated remote attacker with high privileges to conduct a server-side request forgery (SSRF) attack. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system. | ||||
| CVE-2026-62966 | 1 Esp32async | 1 Espasyncwebserver | 2026-10-30 | 7.5 High |
| ESPAsyncWebServer is an asynchronous HTTP and WebSocket server library for ESP32, ESP8266, RP2040 and RP2350. Prior to version 3.11.2, the multipart parser in `src/WebRequest.cpp` frees `_itemBuffer` and sets it to NULL when `BOUNDARY_OR_DATA` matches the closing boundary of a file part, before confirming the following terminator, while leaving `_itemIsFile` true. If the next byte is neither the final closing dashes nor a clean CRLF, the `DASH3_OR_RETURN2` or `EXPECT_FEED2` rewind branch re-injects provisionally consumed bytes through `itemWriteByte`. Because `_itemIsFile` remains true, `_itemBuffer`[`_itemBufferIndex`++] writes through a null pointer. On ESP32 this causes a `StoreProhibited` exception, panic and device reboot, producing remote denial of service. A route with a non-trivial body/upload handler, such as a file-upload or web-OTA endpoint, must be present. This issue is fixed in version 3.11.2. | ||||
| CVE-2026-117530 | 1 Jetbrains | 1 Junie | 2026-10-30 | 6.7 Medium |
| In JetBrains Junie CLI before 26.8.17 command execution was possible due to incomplete validation of allowlisted commands | ||||
| CVE-2026-112362 | 1 Fastify | 1 Fastify-express | 2026-10-30 | 9.1 Critical |
| @fastify/express is a Fastify plugin that runs Express middleware inside Fastify. In versions 4.0.5 through 4.0.8, when Fastify runs with the non-default ignoreDuplicateSlashes option enabled, the plugin matches path-scoped Express middleware against a URL whose duplicate-slash normalization has also collapsed the separator after an absolute-form request target's scheme, so Fastify's router resolves the request to the scoped path and runs the handler while the Express layer no longer sees that path. As a result, a request using an absolute-form target can reach a handler on a scoped route such as an admin path while the middleware for authentication, authorization, or rate limiting is skipped. An unauthenticated attacker needs only the non-default ignoreDuplicateSlashes option to be enabled. The issue is fixed in @fastify/express 4.0.9, and users should upgrade to 4.0.9 or later. As a workaround, enforce authentication in a Fastify hook such as preHandler that runs after the router resolves the request, or leave ignoreDuplicateSlashes at its default. | ||||
| CVE-2026-79589 | 1 U-speed | 1 N300 Router | 2026-10-30 | N/A |
| The WIFI4 N300 router (Model: T1 Pro) v1.0.0 by U-speed contains an insecure access control flaw that allows an attacker to gain unauthenticated root shell. The vulnerability is caused by the exposure of the UART debugging interface having a lack of authentication, authorization and access control functionality. Once the interface is soldered and connected to the attacker, they gain root privilege to the system. | ||||