Description
The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller. z_vrfy_gpio_pin_configure(), z_vrfy_gpio_pin_get_config() and z_vrfy_gpio_pin_interrupt_configure() verified only the device object (K_SYSCALL_DRIVER_GPIO() / K_SYSCALL_OBJ()) and then passed the caller-supplied gpio_pin_t straight through to z_impl_gpio_pin_*() and on to the driver. The only pin check in include/zephyr/drivers/gpio.h was __ASSERT(gpio_port_pin_is_supported(cfg->port_pin_mask, pin), ...), which compiles to nothing unless CONFIG_ASSERT is enabled, so in a production build no check existed at all.
GPIO drivers use pin as a shift count and as an array index on the documented assumption that it is a pin the controller supports. On STM32, for example, gpio_stm32_pin_interrupt_configure() turns pin into an EXTI line and stm32_gpio_intc_set_irq_callback() writes data->cb[line_num].cb and data->cb[line_num].data into a NUM_EXTI_LINES-entry array (default 16) in drivers/interrupt_controller/intc_gpio_stm32.c, guarded only by a compiled-out __ASSERT_NO_MSG(); the same function then reads exti_irq_table[line_num] and calls irq_enable() on the result. Other controllers index fixed-size per-pin configuration tables the same way — drivers/gpio/gpio_ite_it8xxx2_v2.c reads an MMIO base pointer out of wuc_base[8] with the caller's pin and performs a read-modify-write through it.
The issue is reachable only in builds with CONFIG_USERSPACE=y (the file is compiled under that symbol), by a user-mode thread that has been granted access to a GPIO device object. Such a grant is intended to authorize control of that port's pins; the missing validation instead lets the thread drive a supervisor-mode out-of-bounds write of a function pointer and an associated void * past a kernel .bss array, and out-of-bounds reads that feed irq_enable() and MMIO accesses — an escape from the user-mode sandbox that can lead to kernel memory corruption, arbitrary code execution, or a crash.
The fix validates pin against the controller's gpio_driver_config.port_pin_mask with gpio_port_pin_is_supported() in every pin-taking z_vrfy_ handler and returns -EINVAL otherwise, complemented by an unconditional pin >= GPIO_MAX_PINS_PER_PORT range check added to the shared z_impl_gpio_pin_*() inlines.
GPIO drivers use pin as a shift count and as an array index on the documented assumption that it is a pin the controller supports. On STM32, for example, gpio_stm32_pin_interrupt_configure() turns pin into an EXTI line and stm32_gpio_intc_set_irq_callback() writes data->cb[line_num].cb and data->cb[line_num].data into a NUM_EXTI_LINES-entry array (default 16) in drivers/interrupt_controller/intc_gpio_stm32.c, guarded only by a compiled-out __ASSERT_NO_MSG(); the same function then reads exti_irq_table[line_num] and calls irq_enable() on the result. Other controllers index fixed-size per-pin configuration tables the same way — drivers/gpio/gpio_ite_it8xxx2_v2.c reads an MMIO base pointer out of wuc_base[8] with the caller's pin and performs a read-modify-write through it.
The issue is reachable only in builds with CONFIG_USERSPACE=y (the file is compiled under that symbol), by a user-mode thread that has been granted access to a GPIO device object. Such a grant is intended to authorize control of that port's pins; the missing validation instead lets the thread drive a supervisor-mode out-of-bounds write of a function pointer and an associated void * past a kernel .bss array, and out-of-bounds reads that feed irq_enable() and MMIO accesses — an escape from the user-mode sandbox that can lead to kernel memory corruption, arbitrary code execution, or a crash.
The fix validates pin against the controller's gpio_driver_config.port_pin_mask with gpio_port_pin_is_supported() in every pin-taking z_vrfy_ handler and returns -EINVAL otherwise, complemented by an unconditional pin >= GPIO_MAX_PINS_PER_PORT range check added to the shared z_impl_gpio_pin_*() inlines.
Analysis
Analysis and contextual insights are available on OpenCVE Cloud.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | ||||||
|---|---|---|---|---|---|---|---|---|---|
| zephyrproject | zephyr | unaffected |
|
No data.
No data.
No data available yet.
Remediation
No solution or workaround provided in the CVE record.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
Advisories
No advisories yet.
References
History
Wed, 28 Oct 2026 17:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller. z_vrfy_gpio_pin_configure(), z_vrfy_gpio_pin_get_config() and z_vrfy_gpio_pin_interrupt_configure() verified only the device object (K_SYSCALL_DRIVER_GPIO() / K_SYSCALL_OBJ()) and then passed the caller-supplied gpio_pin_t straight through to z_impl_gpio_pin_*() and on to the driver. The only pin check in include/zephyr/drivers/gpio.h was __ASSERT(gpio_port_pin_is_supported(cfg->port_pin_mask, pin), ...), which compiles to nothing unless CONFIG_ASSERT is enabled, so in a production build no check existed at all. GPIO drivers use pin as a shift count and as an array index on the documented assumption that it is a pin the controller supports. On STM32, for example, gpio_stm32_pin_interrupt_configure() turns pin into an EXTI line and stm32_gpio_intc_set_irq_callback() writes data->cb[line_num].cb and data->cb[line_num].data into a NUM_EXTI_LINES-entry array (default 16) in drivers/interrupt_controller/intc_gpio_stm32.c, guarded only by a compiled-out __ASSERT_NO_MSG(); the same function then reads exti_irq_table[line_num] and calls irq_enable() on the result. Other controllers index fixed-size per-pin configuration tables the same way — drivers/gpio/gpio_ite_it8xxx2_v2.c reads an MMIO base pointer out of wuc_base[8] with the caller's pin and performs a read-modify-write through it. The issue is reachable only in builds with CONFIG_USERSPACE=y (the file is compiled under that symbol), by a user-mode thread that has been granted access to a GPIO device object. Such a grant is intended to authorize control of that port's pins; the missing validation instead lets the thread drive a supervisor-mode out-of-bounds write of a function pointer and an associated void * past a kernel .bss array, and out-of-bounds reads that feed irq_enable() and MMIO accesses — an escape from the user-mode sandbox that can lead to kernel memory corruption, arbitrary code execution, or a crash. The fix validates pin against the controller's gpio_driver_config.port_pin_mask with gpio_port_pin_is_supported() in every pin-taking z_vrfy_ handler and returns -EINVAL otherwise, complemented by an unconditional pin >= GPIO_MAX_PINS_PER_PORT range check added to the shared z_impl_gpio_pin_*() inlines. | |
| Title | Unvalidated pin index in GPIO syscall handlers allows out-of-bounds kernel writes from user mode | |
| Weaknesses | CWE-787 | |
| References |
|
|
| Metrics |
cvssV3_1
|
Subscriptions
No data.
MITRE
Status: PUBLISHED
Assigner: zephyr
Published:
Updated: 2026-10-28T16:58:58.927Z
Reserved: 2026-08-31T13:10:32.703Z
Link: CVE-2026-82961
Vulnrichment
No data.
NVD
Status : Awaiting Analysis
Published: 2026-10-28T17:18:43.680
Modified: 2026-10-28T17:18:43.803
Link: CVE-2026-82961
Redhat
No data.
OpenCVE Enrichment
No data.
Weaknesses